Bryan Bros Takomo Irons / Build Specs and the One Huge Difference!

[@raymondpena3790]

You built my Takomo 101 and I still am a happy camper... Thank you AJ.

[@JLeeGolf]

Adam built my new Tacomo 301 CB/MB combo set with the Axiom 125x shafts and they feel phenomenal. Even at a shorter length and he was able to get my swing weight where I wanted Abeto delivered them to me in California promptly. Highly highly recommended for any builds in the future

[@brandonleach1029]

I loved the deep dive into these shaft differences!

[@rictic1929]

Really enjoyed this video . Well done.

[@danrichter9864]

Spot on with the description of the Modus in all aspects. Just took out Modus 120x out of my clubs because it felt like swinging a board. And like he said, it feels like I had to swing super hard to get distance.

[@poktangju]

the 120s are opposite to the 130....i believe the kick pt is on the handle.

[@zzznor1137]

120 has a completely different bend profile than the 130. 120 is like a reversed x100

[@danrichter9864]

Whatever. Felt like a board. But good to know. Thanks.

[@vedrfolnirvedrfolnir6840]

​@@danrichter9864Surprising. The Modus 120 plays very soft to flex. The 120 X flex is equivalent to a Modus 105 S. Usually it's DG and Project X that feel like rebar.

[@danrichter9864]

@@vedrfolnirvedrfolnir6840 I know. It was the shaft I got fitted into but just didn’t work out.

[@BryanBrosGolf]

Ayyeeee. Wanna build me a 4 and 5 iron like wesley but with my shafts? And maybeee one of the driving irons?? 😬😬😬

[@signet1453]

Jerge!

[@EFGMC]

I got you! Email me the specs you want on the utility iron, loft and shaft. Also sounded like Wesley wants one of the utility irons also so let me know those specs as well. [e-mail]

[@agclemente84]

I play the modus 105 R. I really like them ao far.

[@michaelscore6763]

That's a great video! I think dynamic gold is with the stiff buttom section always my choice. But maybe in a 120 specification, I'm old. I like the takomos, but if you i order it a set of with specifications, the set isn't really cheaper than other brands irons. If i order s set of mizunos or Titleist ironside for example, i have the choice of between different shafts and grips, i can get the irons longer in length, with more or less loft, upright or flat and all with the same swing weight. Here you are doing the job for the bryanbros - and if i order a set build like others i can order in the market, the price will be nearly the same at the end... So it's a story for all narrowed by the takomo marketing. And i hate it if a business is build only on a good story.... But again, your video here is great and very informative!

[@furleefarlough3262]

I purchased the 101's with the Obsidian shafts and I didn't care for them. I purchased my 101's in the Aerojet i95 shafts and I love them. It changed the whole feel when I switched to the steelfiber

[@johnbrodnik839]

I wish other big brand Oems would get a clue on designing a great head like the CB. I finally left Mizuno because of all the gimmicks. This is a great design! Even Bettinardi has come out with a great iron!!

[@navykip]

I got fitted into the nippon. I had played Dynamic Gold and Project X in before. But I had a huge miss with the long irons with the Modus. I couldn’t feel the head at all.

[@BigDawgCAM]

Would love to see a comparison of the AMT White vs DG X100! Been very curious if everyone should be moving to a more of a flighted iron set

[@locobenno9435]

this is really interesting....I played X100 for years, moved to a KBS Tour-V 120X to drop some weight as I'm getting older and looking for something less "noodly", but the KBS ended up too boardy...I eventually got fit for the Modus Tour 120X, and by a mile the Modus feels softer and easier to swing than my previous shafts, absolutely love the bend profile AND my launch came down which was really welcomed because I've always struggled with high ball flight....horses for courses hey, cheers

[@EFGMC]

That 120X I think feels quite a bit like the X100 in a lighter weight. Still has some give to it.

[@johnbrodnik839]

The Modus 130’s soft stepped 1x were my gamer shafts in a Mp69. Weight after cutting is 120 grams and a very high balance point shaft so D 2 would feel stiff. They get up and flatten out and stay put as you can see on your test for roll out. Those 130 x shafts are probably closer to a 2x!

[@PetSKi67]

I used to have The NS Pro Modus3 120 130g Tour-X on my blades. And I did see and find the ball flight be higher than what I am used to and what I like. Since on my previous clubs I had KBS C-Taper 130g/X, and getting older and loosing some of the chs, I reshafted the Modus3 to 125g/S+ C-Tapers and the ball flight settled to what suites my eye and what I like to play. When fitted first time for the C-Tapers, I had X-100 on my MP69s. And they felt flimsy. Dispersion was rather wide, and that got sorted by the C-Tapers. People often say the C-Taper is like a numb steel rod, but to me, chs at 93 mph on 7 iron even today the feel is different, solid and responsive compared to the Dynamic Gold’s rubber band -like long lasting bend at impact and lazy kick compared to the firm response I get from the C-Taper. I think for the Modus3 TX and S+ or X C-Taper you need to have the swing speed up in the at least low to mid-90’s for them to work properly.

[@tigcarn]

Ordered some 201's with obsidian 95s shaft last week. Hoping they come in soon!

[@jesusortiz9100]

I am that golfer who buys new golf equipment every other day. I have to say, I took a chance on a set of Takomo 101 irons and it was the best thing I've done so far. The price is phenomenal for the quality. The feel off the face is second to none. The looks are even better. Best of all the golf world for us weekend warriors. HIGHLY recommend the product.

[@manuelhernandez9448]

I got sooo much knowledge. PRICELESS tala about MORE - other types of shafts

[@goje_022]

Played Modus 130X since 2016 coming from PX 6.5 and X100; I definitely seek the launch these provide. In an iBlade that setup is about as high launch you can find especially considering 130g shafts. To me in motion Modus 130 feels a lot softer than when you stand statically and do a waggle test. Heavy loaders dream!

[@xxsaulsxx6690]

Im so surprised they use those, it makes me want to try them 😄

[@EldredMerricks]

Can’t wait to get back to the lab!!!

[@MiloMalt_]

You definitely have the swing speed for the x100's. Was not expecting to see 93mph club head speed. Kudos.

[@EFGMC]

That's not typical speed, that's going after it speed.

[@industrialpalletworx3548]

Love the shaft differences, but for me the more telling part is the 2* flat versus 1* flat over standard. I would have to gather from that both of them are using the flatter lie angle to negate some of the draw spin they put on the ball with there swings. Something I think a majority of pros do.

[@EFGMC]

Yep, most of the elite players never ever want to see a ball going left so they do all they can to lessen that chance.

[@glennmcilvenna3142]

thanks for the insight AJ

[@azcharlie2009]

I bought a set of Takomo 101s with KBS tour lite regular steel shafts. I have to admit, I don't really like them. I'm 76 and losing a lot of club head speed, but I can't stand a soft flex shaft. The KBS shafts feel really heavy and stiff. So, I think I really need a lighter graphite shaft. Wish I'd paid the extra $100 and got their Obsidian shafts. What I really wanted was the UST Recoil shafts, but they didn't offer them. I love the P790's with those shafts! I wonder if you have any comments on Takomo's Obsidian shafts, who makes them, etc. I'd appreciate it... I used to be a fairly good single digit player (shot 83 yesterday), and I probably should have bought the 101T heads instead of the 101s.

[@jayhales3822]

I agree with you about that Nippon shaft, swinging a pipe with no give. My favorite all time wood, hybrid, and iron shaft goes to the Cobra Aldila DVS line of shafts. I should have never traded off my Cobra S2 Max 3-6 hybrids 7-GW iron set with the DVS shafts. Still playing the DVS shaft in my driver and fairway woods. By chance do you know the bend profile in the DVS shafts

[@EFGMC]

As I remember, it's a variation of the NVS which had more of that soft mid section.

[@HD-ek9vf]

Do a vid on the obsidian shafts by takoma thx

[@bobpegram8042]

I formerly used Dynalite Gold X100s, but they aren't made any more. They had VERT stiff butts and softer tips. They made the Dynamic Gold X100s feel boardy. The Modus 130 sounds like the Dynalite Gold, but heavier overall. Why would a softer tip make the ball go right? I thought a livelier shaft would close the face more. That was my experience with the Dynalite Gold. Maybe it is affected by swing timing.

[@EFGMC]

This shaft with my timing resulted in a right miss. Even though the tip is softer, that was not registering when I swung it. It just felt very stout overall. I probably don't have the lag in my swing to really activate that tip section is my best guess.

[@Tomdabomb86]

Great work

[@jarisalmi6484]

Thanks again! your videos are great! How much your work cost per club?

[@EFGMC]

Depends on the components you use. Head, shaft, grip etc.

[@jarisalmi6484]

Ok i understand that. so, how much your charge per hour and how many hour your have to charge per one club or set of irons?Where i can see prices for shafts etc.@@EFGMC

[@jarisalmi6484]

👍

[@1976jcole]

I’m curious what screen/setup you have. The bounce back is so soft.

[@jettermatthew13]

Can you do a video of the 2 different shafts takomo offers as far as the kbs tour and c taper lite? Would be good for us not as good as bryan bro golfers 😂

[@waqarghulam3548]

Just saw a video where Sergio said he has put LA Golf shafts in his irons

[@EFGMC]

Yeah, he used these shafts probably 10 years ago. Again not many players use them so it's hard to find examples.

[@joebattaglia8573]

I enjoy your channel so I just subscribed. Question about regripping a long putter with a 14" Superstroke grip. The shaft diameter is .620 and the grip is designed for a .600. I tried but the grip sticks about half way on. So I have to pull it off. Any Suggestions. Thanks

[@EFGMC]

My best advise is grip tape the entire area even past where the grip ends, use liberal amount of solvent, get the tip of the grip started and then just push hard and fast. It will stretch and fit over the shaft but you need to be more "persuasive". Don't worry about getting it on straight right now, just get it on and then make any alignment tweaks. Once the tape is dry you can remove any tape that sticks out past the grip.

[@joebattaglia8573]

@@EFGMC Thank you

[@1ogan.]

good video but you should’ve done the shafts in your stiffness

[@tommatthieen5017]

Im playing the modus3 x 120g right now and habe been playing the s400TI before. For me the modus 3 just seem alot smoother and not stiffer at all

[@EFGMC]

The 120 is a very very very different shaft from the 130. I think the 120 plays much more like a Dynamic Gold.

[@mjheggie2]

Thinking about doing the same!! AJ, I tried the modus one time at a fitting in 2019 and I could NOT find the club face to save my life, went everywhere except where I aimed and 20-30 yards shorter (6iron). Does that correlate to driver shafts ? Back then the 2 shafts,for irons, that fit me best were the kBS C Taper-lite Xflex soft stepped (favorite) and the Project X LZ 6.0 standard. I tend to be an aggressive swinger. Should I get refit and try any different shafts or do you think that if they fit me then they probably still do. I’m in south Florida not in Atlanta where you are 🤦🏼‍♂️🤷🏼‍♂️..

[@JDSFLA]

Is the NS Modus3 105 the same bend profile as the 130, just at a lighter weight? Thank you.

[@markbusey1593]

Great video! I'll be ordering Takomos this week, but I have a question. I'm 6'2" and I'm ordering 1" longer shafts. How much do I need to change the lie angle? Am I changing it more flat or more upright, and how many degrees do you think?

[@EFGMC]

It depends on the length of your arms, your posture, and your hand position at impact. Hard to make a guess on that though if you are 6'2" and going a full inch over, I'm not sure you would need upright. More likely flat or no change.

[@markbusey1593]

@@EFGMC ok thanks

[@chuckgauthier2374]

Do you have Takomo heads in stock? Lefty 101 or 101t? Can you build and ship? Love the channel!

[@EFGMC]

We can build and ship them to you.

[@dduncan86]

Sergio plays LA Golf shafts now

[@ajv88]

How do we get you to build us a set? 😂. I’ve been eyeing the 201’s, I currently game the 2019 p770’s. Looking for a cheaper switch to try.

[@EFGMC]

Send me an email or message as to what you want and I can get you a quote!

[@Jkan2001]

Huge downgrade don’t do it

[@allenkroencke9901]

What Tacoma head would be good for a senior with mid 60 club head speed

[@EFGMC]

I would use the 101 if you are looking for more distance and forgiveness.

[@Ulster2]

When you say 2o flat. Or 1 degree flat. What do you consider neutral lie angle is for say a 6 iron. I assume there is no industry standard.

[@EFGMC]

Correct. Just like everything in golf, no industry standard for lie, loft, length, weight, any of it. In this case we were going off the Takomo 301 starting lie angles.

[@donhampton7174]

AJ, i went to Takomo website and only saw complete sets for sale. Unless i missed something, is there a way to buy their iron heads independently? it looked like in your videos you opened a new box of Takomo iron heads with no shafts. thank you for any insight

[@EFGMC]

Any of the irons can be bought as head only sets. It's right under the add to cart button.

[@RednecksWhoPlayGolf]

Love ur videos! Have a question. I currently have takomo combo 301s. Would like to have the 4 and 5 101t and 6 and 7 201. How can I order just the heads? Any help would be appreciated.

[@EFGMC]

You can only order full sets of heads with Takomo. Would have to order 2 full sets.

[@coltonmoore5996]

I'm 16 and making clubs is what I want to do, all I have are a bunch of regular flex steel harrison driving shafts, is there anyway to make that into an iron shaft or a wedge shaft? I'm just curious because I'm planing on buying takomo 101t irons for my upcoming golf season and have some shafts for them but the wedges I don't have anything for. So I was hoping there would be a way to build my own wedges with what I have.

[@EFGMC]

Wood shafts can't be used for irons because the tip diameter is different and once you cut them down the butt diameter will become too small.

[@coltonmoore5996]

@@EFGMC thank you so much for the reply, just saved me a lot of time and struggle

[@cccobby]

Very surprised they are not playing the Takomo mb irons. they are good ball strikers so they should be playing them.

[@BigDawgCAM]

I think time will show no one is a good enough ball striker to play blades. Even pros are playing themselves

[@cccobby]

0 seconds ago I think you could not be more wrong. Tons of pros play blades. Back in the day all the pros played blades. It’s like training wheels for bikes. Would you keep using them cause it makes it easier to ride a bike? Absolutely not.

[@Golf_Hack]

If I told you I’m launching my irons too high with Modus 115 tour stiff shafts, what would you recommend I try? My 7 iron club head speed is about 90

[@EFGMC]

Bend your irons stronger would be my first recommendation. That's the only guaranteed way to change launch. If you are looking at shafts, I would try something with a different profile and see what happens. Don't worry about what the shaft says it does, just see what you do with that shaft. Maybe a classic like Dynamic Gold S300??

[@wayneowens1649]

Hi I’m playing Ping I210 with modus 105 stiff shafts my Question is can you recommend a shaft for the takomo 101t irons lost a bit of distance due to age 65 current handicap 7.9 I’m thinking about KBS Tour lite regular or graphite any recommendations would be appreciated 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@EFGMC]

Lighter won't guarantee faster swings and longer shots. It's often the opposite so I would definitely test out some different weights first. Be aware the 101t has pretty weak lofts for a hollow body iron so it's not always the best option for someone looking for more distance.

[@jeffkatto9696]

.370 hosels for the takomos? Do u have to shim .355 taper iron shafts?

[@EFGMC]

Yes, brass shimmed for a .355 shaft.

[@Kridian01]

wait-wait-wait-wait... did you put the *wooden dowels* in 'em?

[@EFGMC]

The X100s have the dowels. I did not do it for the Modus 130X. I've not ever tried on a set of those since they are so few and far between. Did not want to experiment on George's clubs.😅

[@shawnjohnson21]

im curious on how the Modus 130s and 120s differ. Is it just weight? I was fit into the 120s with my Ping i525s. Down the road I ordered a i525 UW to add to the set and did the 105 since the 120 was on back order. I cant hit the 105. Its really weird. I didnt think the difference would so drastic.

[@EFGMC]

Nippon Modus shafts vary by a huge margin. The 105, 115, and 125 are all stiffer lower launch. The 130 is as covered, a very unique profile that only suits certain golfers. The 120 is a softer feeling mid launching shaft that will fit the greatest number of rec golfers.

[@shawnjohnson21]

@@EFGMC That would make sense based on what I am seeing. My PW (46) with 120s flies higher and the same distance as my UW (50) with the 105s. thanks!

[@cogden17]

What graphite shaft would you say is most similar to x100? Mmt?

[@EFGMC]

I don't do much with heavy graphite shafts. I would guess that the Axiom 125 would be pretty close.

[@CybekCusal]

Do people with heavy shafts generally have lighter swing weights?

[@EFGMC]

That's a complicated question. A lot of swing weight is dictated by the weight of the component pieces used and the length so hard to give a blanket answer. That said, it's hard to get a lightweight graphite shafted iron as heavy a swing weight as a similar spec'ed out heavy steel shaft.

[@adampark4238]

I ordered the 301 combo from takomo with the stiff light shafts. I must check my emails 100 times a day looking for the purchase sent out email

[@will.m1110]

🎉

[@MrMarvin444]

Sergio hits L A golf shafts

[@myd0gr3x]

watching Wes, I think he needs to switch to Wilson irons...

[@Omnis2]

I play a 5.5/115g Project X LZ and have another set of irons that came with the NS Modus 130 TourX shafts. I dunno how any golfer, pro or otherwise, plays the Modus THAT stiff. Feels stiffer than half inch rebar. If you hit anything other than the sweet spot, your hands feel like they exploded. Not fun.

[@Handletaken4]

61!!!

[@christophersiegert8343]

i.e. there is no such thing as a low launch / high launch shaft. Just how a person feels and delivers the shaft.