BSA MTB Stock Hub Conversion to Sealed Bearing

[@clementine1061]

Wait , That can make wheels spinning faster but what about maintenance durability how long can it ride for safety.

[@j-ride8600]

The only maintenance you'll need to do is to visually check the physical condition of the ball bearings as this is a closed type ball bearings no need for regreasing. Durability depends on the quality of ball bearings you used.

[@micaiahmorrisYoutubeChannel]

Hopefully switch bones fit !

[@j-ride8600]

It'll fit.

[@Underground_Reality]

i ordered 6200 to fit all inside the hub.of course i know need some machining witch i know how to do,however what is your thoughts after install the bearings?

[@j-ride8600]

It was pretty good after i install the bearings the bike move faster and there was no difficulty installing the bearings for my hubs.

[@melmarcomontera6902]

​@@j-ride8600what is the size of the bearing

[@j-ride8600]

@@melmarcomontera6902 6000 front and rear

[@JhillSamin]

Pang shunfeng hub po anong size na bearing?

[@j-ride8600]

@@JhillSamin hindi ko po alam bearing size ng shunfeng hub

[@offthegrid2635]

6000 ba ang bearing mo paps?

[@kurtalvinsebuala8828]

Boss kasya po ba ung axle ng sealed bearing sa butas ng standard na hub?

[@j-ride8600]

@@kurtalvinsebuala8828 yes kasya po malaki naman po butas ng standard na hub sa gitna.

[@kurtalvinsebuala8828]

@@j-ride8600 salamat boss

[@xyrellevaldez5110]

Kasiya parin ba yung new bearing sa stock axle paps?

[@j-ride8600]

@@xyrellevaldez5110 hindi po kasya sa stock axle paps. Maluwag ang stock axle sa new bearing.

[@roysardual1991]

​@@j-ride8600 if mag palit kapo ng sealed dapat din po ba palitan yung axle? anong size po ng axle?

[@j-ride8600]

@@roysardual1991 yes po kailangan din palitan ang axle dahil hindi kakasya ang sealed bearing sa lumang axle. ph.shp.ee/scR7dkH Yan po ang link kung saan ko na nbili ang axle. Nandiyan na rin ang sukat.

[@roysardual1991]

@@j-ride8600 ano po sized ng bearing po sir???

[@j-ride8600]

@@roysardual1991 6000 po ang size.

[@vicentemacias1656]

En ningún momento enseñaste como quedaba el eje

[@newvaper3794]

boss j-ride sa foxter 36 holes na hub ano pong size ng bearing na di na ako magpapalit ng bearing cone sa hubs at fit na din yung axle? thanks po in advance.

[@j-ride8600]

Ang outside diammeter po ng bearing 6000 ay 25mm pakicheck po kung 25mm din ang bearing cone ng hub mo.

[@newvaper3794]

@@j-ride8600 ok po sir j-ride. hanap muna ako ng caliper...update ko po kayo. thanks.

[@j-ride8600]

@@newvaper3794 welcome po paki check na lang caliper po para sigurado

[@nightmare4488]

Pinalitan mopo ba ng axle

[@j-ride8600]

Opo pinalitan ko po ang axle

[@bossabn3382]

rear hub bearing size please 🙏🏻

[@j-ride8600]

Bearing size 6000 front and rear hub po.

[@billybarliansyah9622]

I think for Rr Hub can not use bearing size 6000, especially for the sprocket area. This is due to the different shape of the cones. I've tried to use bearing size F 6900, but it's a bit risky because it doesn't support well on the cones.

[@maangasfounder8886]

@@j-ride8600 same size lang po ba ung 6000 sa 6200 size of sealed bearing sana masagot thank u

[@jrdanzyki8222]

kasya ba yung bearing sa shimano m525 di ko kasi alam size

[@j-ride8600]

Hindi po yan kasya sa shimano m525 kailangan mas maliit pa na bearing dyan.

[@markjosephsalvador2301]

boss same ba ng size ang bearing??ty..

[@j-ride8600]

Opo same size ang bearing ng front at rear hub. 6000 ang ng bearing.

[@BZzZzZzy29]

Ano po bah size sa sealed bearing sa standard na hub

[@j-ride8600]

@@BZzZzZzy29 6000 ang size po front and rear

[@BZzZzZzy29]

@j-ride8600 thank you po

[@j-ride8600]

@@BZzZzZzy29 your welcome po

[@mohammadrehanbagul4116]

pinalitan mo yung axle boss?

[@j-ride8600]

Yes pinalitan ko ang axle hindi na kasya ang luma.

[@marcelinoalvaran809]

san ka po nkabili ng axle ata anung sukat dapat??

[@jhongleal9461]

Boss tanong ko lng pwede ba yan sa stock rim ng foxter ft301

[@j-ride8600]

Hindi lang ako sigurado kung pwede sa foxter. Ang outside diammeter kasi ng bearing 6000 ay 25mm. Sukatin mo muna ang diammeter ng bearing housing ng stock hub mo kung kakasya ang bearing 6000.

[@nimishrai1363]

You should have gone with a metal capped bearing rather than a rubber sealed one.

[@quiponesjimandrewm.9320]

Boss pede ba sa quick release na axle yang sealer bearing?

[@j-ride8600]

Pwede po basta kasya ang axle sa bearing at kasya ang bearing sa hub mo.

[@prottaybarua4341]

bearing Name

[@j-ride8600]

@@prottaybarua4341 no brand name po

[@ngaran2108]

inalis mo po ba ung kopa?

[@ukpkmkk_2]

Couldn’t you find worse music to add to the video?? I don’t think you searched hard enough.

[@j-ride8600]

It's the best music you can search

[@encarnashaun691]

Shareef, sir, the focus is not on the music, rather, the video content. The repair of the rear hub, that is.

[@B_COOPER]

You could just mute the video….

[@AndreiDoloiras]

umalog yung sakin

[@j-ride8600]

@@AndreiDoloiras sealed bearings din po ba ginamit niyo?

[@marklouieadame]

What is the bearing size?

[@j-ride8600]

Front and rear hub 6000

[@zzz525]

boss ano link sa shoppe ng pinalit mong axle kamusta wala namang alog?

[@j-ride8600]

shopee.ph/product/194663833/11601972964?smtt=0.194112113-1657350327.9

[@j-ride8600]

Ayos naman po wala namang alog basta maayos lang pagkainstall

[@rodelmarpamintuan-zj3bs]

Wala man akong natutunan sa iyo!