DIY Force Feedback Steering Wheel DC Motor | Sim Racing FFB PC Only

TUTORIAL Direct Drive FFB servo motor DIY: • CARA MEMBUAT DIRECT DR...
Sim Racing Parts yang dipakai:
- DIY Direct Drive 15Nm
- DIY Steering Wheel Plan: cults3d.com/:1472483
- DIY Steering Wheel Button Box plan: cults3d.com/:1472773
- DIY Sequential Shifter
- DIY Pedals
- DIY Adjustable Hollow 4080 Rig
- Other plans: cults3d.com/en/users/BSHardwa...
Support:
Paypal: www.paypal.me/bshardware
Streamlabs: streamlabs.com/bsgamingsimulator

[@jmoulins3613]

Looking forward to updating the tutorial

[@tasso6196]

Amazing design.

[@oktc68]

Wow! That looks very powerful! Now I'm thinking I should build one...

[@naboyapasha5102]

Wah direct wheelnya osw ada saingan nih. Kayanya gw pasang d meja gw, pda geter tu monitor. Btw good job gan, keep it up!

[@nge-gamebae7940]

Suuuuppppeeerrrrrr, lanjut bro

[@OfficialBBC]

Looks amazing

[@shadowvault111]

Great build man, actually I'm working on the stm32 sim steering build when are you going to reupload those removed videos love your channel man keep going and hope to see those videos back soon

[@kinangeagle133]

The intro looks like an electric fan Imagine holding an electric fan

[@carterfitzgerald929]

Hi I was wondering if you could do a detailed parts list as there’s none in the description it would really help thanks!

[@noahgiesel9030]

It's not a detailed list, but here is how most diy wheels are made : Arduino Leonardo or stm32, Bts7960b, Rotary encoder, MY1016 or My1020 or My1025, 12v power supply (50A depends on motor ), Some cooling fan for the motor and bts, Pedals with potentiometer and load cell for brake, If you are using arduino go with EMC utility pro, if you are using stm32 go with mmos

[@kostinho790]

@@noahgiesel9030 How much do the materials cost as a whole?

[@noahgiesel9030]

@@kostinho790 it depends of the kind of project - force you would like to have. If you spend around 150-200 euros you will get results like wheels of 800+ euros. You could also spend less to reduce motor force, so you have to buy just 1 bts. The end result is up to you on how fancy and strong you want it to be.

[@kostinho790]

@@noahgiesel9030 Sounds like a value for money choice for me, since a mid-range sim setup costs around 400 euros in my country. I might try to make my own wheel if I find some spare time.

[@Semsem-qq8bk]

@@noahgiesel9030 How do I set up the cables with the stm32 ? I've never used it and I want to know how to connect the parts to it.

[@johnblack3398]

nice work

[@MultiSteelking]

It would be nice if you make a tutorial with all the parts listed and wire diagrams, etc... Its really nice project, I would like to try myself :)

[@gasixteenb11]

Are you will to build one for me as I'm planning on building a sim racing PC. Great work and video

[@fatboyhilton]

I would love to see you using this in-game and get your feedback on how it drives.

[@Luca-pg5mj]

Hello, but using the ffb on the steering wheels nn you go to wear out the brushless motor?

[@juancarlosaguilararzamendi5075]

Excelente project!. Can you upload the others videos of the construction, and how to program the boards, schematics, etc?.

[@BSGamingSimulator]

Hello.. yes i will do

[@maberalc]

@@BSGamingSimulator you told part list on description, i don't know where is it. could you please post it?

[@many12379]

Maate we are waiting for the tutorial :>

[@jejedoodle1629]

Kapan mulai upload video bikinnya mas? Saya udah nunggu-nunggu. 🙏🙏🙏

[@saputrabagoes97]

nunggu detailnya nih om, semoga berkenan dibuatkan videonya hehe

[@BSGamingSimulator]

Siap. Maaf lg sibuk bgt. Tapi sebentar lagi release

[@reviewforthetube6485]

Now this is awesome man that thing is fucking crazy strong damn thr final build is beautiful

[@victoralejandrocanteraherr9003]

On the V3 you don't use the decode printer?

[@iansibuma6582]

When will the detailed documentation and building of this wheel be released? Any updates?

[@xenyatox9814]

I want to put my seat on cylinders, can you explain or answer me with a link helping me to understand the software pls. Thx ^^

[@AM44]

good job Man

[@khairtara5618]

Keren gan, dijelaskan dengan detail dong sekalian bahan nya juga

[@BSGamingSimulator]

Siap om.. saya jelaskan secara lengkap di video berikutnya. Ditunggu yah

[@asalasal5121]

@@BSGamingSimulator oke

[@imightbearacist6613]

Part list in description? Fucking where?

[@nico_poriol]

what power supply did you use? Specs. Thanks!

[@slyztercoreveanged7587]

dude can you share the detailed process..i really like to try build it myself even tho i know nothing how to do it lol..haha..but willing to try it

[@rafagst007]

Hi bro, could inform the list with the componente you used? I want to manufacture my steering whell using a mega arduíno

[@workpeaceful9066]

The arm&hand broken ? this very high torque XD

[@ejignacio3839]

Would you say v-belts and pulleys are enough for the FFB? Do they slip at high resistance from the motor?

[@BSGamingSimulator]

No, thry can hadle my FFB. If tou want better, use XL pulley

[@hyuugawes]

Do ou have any picture of how do you set the tires in STM32?

[@jonaszdobrzyn3109]

Looks great. Is it better than T300?

[@davidkundlabittner5734]

could you use MY1016 Electric Bike Scooter 24V 250W Motor or the condition is 12V?

[@djjony456]

man this build works in simcades?, like fh4 or the crew?

[@JonsonRocky]

Hi, i have a question about projects like that (using Arduino), when you put a value to the "degrees of rotation" config in the software, the motor acts like a brake to stop the wheel to these value? Or (for example) you need a gear mechanism to stop on 900° of rotation of the wheel?

[@user2C47]

Yes, endstops are handled in software.

[@speedboy911]

Can I use a car wiper motor with cut off gearbox?

[@facundojosemolinamasmut7875]

hello buddy, where is the diagram connection for the v3? thanks! Very good job

[@NarrThenn]

Hi BS Gaming. Is it possible to make this for an abox one??. Thanks

[@IvanAstariyantoPutra]

Apakah boleh disharing part2 yg dibutuhkan om ?

[@mypc2172]

Bro which software you use here 0:35 for making this type of blueprint.

[@jus4027]

How many times have you been to A&E looks brutal torq. Just kidding v3 looks proper pucka

[@BallestaRacing]

This is brilliant! but... what about making the same with stepper motor and being a direct drive?

[@BSGamingSimulator]

You cant. Only DC Brushed motor

[@1998opai]

How are you reading the FFB data from games?

[@pacioo6296]

you use v-belt sterring wheel don't lose position when you use the wheel ?

[@user2C47]

Encoder should be connected to the wheel instead of the motor, so no.

[@onedaytravelvlogs338]

Which software you used

[@sumitbarua8241]

Hey great work,!!! can you please share the connection diagram of all the components, such as the connection between the stm32 board and bts7960 motor driver. It would really help me build my steering wheel. Thanks in advance.

[@BSGamingSimulator]

Hi.. i will make tutorial soon. I got very busy now

[@facupadi-ms-2465]

hi! thanks for the video. I have two printers, and I want to use two motors, how do I weld them? just to the same contacts in parallel? can I use stepping motors for this? have those to be the same model or do they have the same power and ° of step, or just the same ° of step? thank you!!!

[@israelalonsonino2605]

where do you buy the quick release? I have 12mm shaft and can't attach it.

[@BSGamingSimulator]

Simply use 2 bolt for horn

[@NakiliFR]

@@BSGamingSimulator Hi, i'm looking for the diameter of the center hole of the quick release, do you have it ? Thanks

[@mertverdi]

Will the construction stages come

[@ericjohnmusni5174]

Sir is that a trapezoid threaded?

[@winnerinsanjaya7604]

bang, kalau steering wheel diy gini support game apa saja ya?

[@nico_poriol]

What is tue strength during the testing in the first fee seconds?

[@hughegan6927]

What size display is the screen?

[@kinangeagle133]

How did you do the electronics?

[@ilhamsyahilan6746]

Ada link pulley sama belt nya ngga mas? Saya nyari belt gitu belum nemu di olshop

[@lorenzoarnoldi9722]

Could you please tell me what kind of elettric motor and encoder you used?

[@BSGamingSimulator]

I used MY6812 and omron 2000ppr encoder

[@atharvaadlak2583]

cost in usd? if i get 2x 775 motors??

[@ikerj.4884]

did you put an arduino on the steering wheel separate from the rest? for the buttons?

[@BSGamingSimulator]

Arduino just for wheelbase. Pedals and button separate. But now i used STM32f4 board

[@cerberus6258]

@@BSGamingSimulator could you do a tutorial on the pedals and shifter?

[@bardocz]

How does the FFB compare to a Fanatec or Logitech wheel?

[@BSGamingSimulator]

I never tried fanatec, but it is greater than logitech

[@pashalavr9732]

Seberapa panas mesin selama permainan intens?

[@artawanwahyudin4645]

Bikin tutorial nya bang 😂

[@DNAP460]

Itu gigi nya boleh pakai push button mas...

[@harman22595]

How much does both pulley weight, does it effect motor

[@BSGamingSimulator]

weight isn't give an effect overall. But the ratios between them...

[@isaiahcarter7764]

Can I use polyurethane belting to make the belt? Because I can’t find the belt any where.

[@BSGamingSimulator]

a XL or HTD 3M Pulley is sold everywhere. use it to better grip...

[@nestoroma]

Very nice. How to make encoder?. Tenés un tutorial de como hiciste el encoder? De cuantos ppr es?

[@BSGamingSimulator]

I used omron encoder bro..

[@AKSS_-bq1wi]

it is working with Forza Horizon 4?

[@choirulfadilah3683]

Wapiik mas bro.. btw estimasi biaya habis brapa semua versi?

[@seplayer]

Why did you use a gear instead of building the motor directly to the shaft?

[@urbangamers7386]

Where can I get encoder and scanner please tell me

[@user-jr6py8cj4u]

Hey. my motor control does not work. I connect everything according to the scheme. tried 2 different drivers. motors also took different power. he sees the encoder speed, but there is no reverse force.

[@rumahemakproduction577]

kalau pakai arduino uno r3 bisa itu om????

[@pasaabdurachman]

gan yg pake resistor dari mana kemana?

[@andre_fortunato]

what games does it support?

[@hencoknoetze2779]

It depends on what game you want to play asseto corsa is one of the realistic games to play with a sim

[@arielcor7392]

Hi. Where can I find the code for Arduino Leonardo ???

[@rahulAgrawal-zy6tg]

Brother please make a detailed video I really want to make this

[@EugenioCiullo_V-Blog]

i've used 4 bts7960 with a motor 27volt 40Ampere 960watt, dual powersupply from server 12v 80A in parallel, after 5 minutes 2bts in electrical surge, and 1 power supply is broken...

[@EugenioCiullo_V-Blog]

@Fábio Garcia per il semplice motivo che se ne utilizzi uno lo stesso si brucerà a causa dell'elevata temperatura. Ora infatti nel mio nuovo progetto ho inserito 12 bts alimentati da un trasformatore di corrente 14 volt 170 ampere. Ora funziona tutto a meraviglia e la coppia del motore è mostruosa

[@Hasar777]

damn thats like washing machine haha

[@automaingaming5205]

bang untuk dc motornya itu typenya brp?

[@automaingaming5205]

kami tunggu tutorial yang pake arduino bang,

[@jeralddcruz7325]

Can I use motorcycle starter as dc motor?

[@BSGamingSimulator]

Dont.. its not designed for continously used

[@reviewforthetube6485]

Holy fuck man lol insane power

[@evodesignsracing5925]

Could you make a tutorial please

[@Gambiarte]

Where can I get the software and firmware?

[@onurboyaci5147]

Hi mate great job first of all and i just have a questiın for you. Can you tell me motor specifications?(example rpm, is it includes encoder or not or anything else) would be glad if you reply, thanks.

[@BSGamingSimulator]

I used MY1016 180W

[@onurboyaci5147]

@@BSGamingSimulator thanks al lot dude, but is this engine too much powerful for this device?

[@m.riandrawicaksana2528]

Untuk PSU kan kabel nya banyak, lha kabel yang dipake buat power steering nya yang mana yah

[@ivankusuma6993]

Kabel hitam sama kuning gan

[@maksimlyzaev]

Hi, this is really cool! What kin of motor do you use here? Is it servo or just regular brush motor?

[@biscottooo]

It’s a regular brush motor I think

[@rjmercado5953]

Bro how to connect bts7960 to computer psu

[@simracingos]

I like your KZbin video rfactor 2 mod video I haven't learned to make rfactor 2 mod

[@ArjunKumar-oo9ik]

details on pulley and belt

[@vxezra]

tutorial lengkap buat pemula ada dimana bro? saya masih clueless walaupun udah replay video ini berkali-kali.

[@BSGamingSimulator]

Iya maaf ini emg cuma video teaser aja. Full video nya ilang karena rusak nya HDD.. Cek video saya ada tutor lengkap bikin direct drive..

[@vxezra]

@@BSGamingSimulator siap bro

[@aryadwiadityadarma6002]

Bg software yang di pake apa aja

[@ittechindonesia930]

kalo pesan jadi langsung pakai berpa ya gan

[@letsGamingLP.]

What is your dc motor in the video

[@BSGamingSimulator]

MY6812 180w

[@user-zt8my9gi1m]

Здравствуй подскажи пожалуйста как установить прошивку и где её скачать

[@kojacknet]

Putarannya maut biaya buatbya total berapa gan?

[@masmaull5364]

Itu pake dinamo apa mas?

[@pa5261]

Fantastic project! Where did you buy those pulleys an BELT ? What dimension.?? Pleaaaase!!! :-D We can get in touch by email too

[@lou2737]

What motor do you use here? Please! Some one tell me a motor I can use for my own!

[@lou2737]

@@warrenRV Thanks

[@loganvian8389]

video Part2 lengkap'y ko diapus om.. saya mw liat diagram dengan 2 BTS yg dulu

[@BSGamingSimulator]

Iya itu di channel lama yg sdh dibeli org... saya upload lagi secepatnya ya om

[@loganvian8389]

oh gt om ok ok.. soal'y part2'y udh ada tgal bikin 😁😁😁

[@ToniLixSim]

why not direct ? can u tell me plz i want to build one but i see many people are not building direct but with belt system, anything u can teach me why u use belt and not direct ?

[@ToniLixSim]

@GABRIEL BEZERRA thanks for info small motors looks very good for belt, bigger motors are easy to use some direct drive, but the medium motor witch u say they have short shaft, they can make it longer.. ok thanks again im going to test direct first cause my motor is medium but strong with 350w 30.000r/min this is strong enough.