BST Carbon Fiber Wheel & Ceramic Bearings onto 2018 S1000RR!

[@offroadfreak8582]

Zack is such a skilled mecanic. Love watching him work!

[@RideByNight]

Bro, you wasted no time starting the next bike build. You're an animal. I love it.

[@dustinbaltis4]

This guy is a next level mechanic

[@jasondavis9215]

Man ib. Your so lucky to have a mechanic like Zack. I wish there was a Zack in every motorcycle dealer i went to lol

[@650ib]

I agree!

[@MtnMoto]

Good to see a mechanic that knows what the yellow dots are for.

[@vr___46]

Thank you so much!!! I changed my bearings at my dymags like a pro! The best video ever made! Mechanic is so cool!

[@650ib]

Thanks!

[@vincentmbuyane]

Let the 3rd season build begin..we off to a great start as always ,Zack teaching us basic science 🤔🤔😎😎 making it look cool..

[@thereallbking]

The last bike build was amazing, but I think this might be even better! 😍

[@650ib]

I agree!

[@peterago1082]

Zack is teaching us something yet again for sure!!!!!!!

[@fromtheedgeofdarkness]

I endorse BST for my racing and road use. I’m very happy I have gone with a company I can work with, I put 190NM of torque through the rear 240mm, BST is the best as far as I’m concerned, the quality and their professionalism is great.

[@willyagabo9440]

That’s one hell of a service i say it 10/10 he did good on doing what he’s good at.

[@tabish7733]

I just loved how nicely he did the whole thing.....

[@nelnjace]

Gotta love BST Carbon wheels on a Beautiful BMW S1000RR Simply Awesome!!!😀🏍

[@s1k_addiction]

Theyre gonna look so good. I cant wait to see the finish project. I bought the Rotobox boost and i need to see zack to get these installed soon so excited. Thanks to you and mani!

[@TheVilouboy]

Nice upload brother. I’m glad I watched before posting my comment. I’ve been trying to order set of BSTs but saw that you had to wait a minute as well. Looking forward to the next video

[@clintonevans4633]

Zack is a genius

[@bradkister79]

Season 3 off to an awesome start.Go Zach!

[@kennethengstrom583]

Awesome wheels👍Zack is da man👌👍He can do the job in the sleep😴🤗😀👍 Thank’s 650 ib👍

[@650ib]

I agree! 👍👊💪✔️

[@vetrivel1994]

Good see Zack back in the videos

[@vr___46]

Wow amazing skills and knowledge! You made the change so smooth, the best part was how easy the bearing slide in the seats!! I wish every mechanic would be so careful working on our bikes. Hat down, my respect. Ps, if you would put the conical tool at the freezer too, wouldn't be inserted easier inside the old bearing?

[@Enonymouse_]

K&L has a nice dual arm that would speed up the tire seating process.

[@davidlewis6725]

All signed up for this season! Bike already looks amazing!

[@650ib]

Thanks man!!!

[@ESBKLife]

Should have went with the Rotobox Boost. But those are still sweet!

[@spiro5327]

Great start to the new series. After this one is over, you will probably use a different make of motorcycle for the next build series, so does this mean the end of watching Zac perform his magic on future bikes or will you retain his services ? as i believe he is an invaluable part of the channel now.

[@taps_1021]

I seen some builders use ceramic bearing in there engine builds.

[@steelers19727]

2014 GSXR1000 BST. You have been so successful in doing this for others why not me bro.....BTW, Chris said what’s up from Maryland

[@650ib]

Hello Jeffrey and Chris.

[@steelers19727]

LoL

[@asim6db]

Didn’t realise how good your teeth are 650 and love your videos

[@robertomalatesta6604]

Zack's a wizard

[@650ib]

Indeed

[@alleycat8473]

Are these rotors heavier than stock? I guessing they are since they are 5mm thicker and the small difference between the total wheels. Should have weighed the rotors by themselves vs the stock ones. Still cool video as usual.

[@Captndarty]

Great video and is making me contemplate these wheels. One question though since metal expands with heat wouldn’t that also cause the diameter around the bearing to decrease and become tighter?

[@hamad1979]

thanks vor the video .. can some one tell why carbon wheels is not used in MotoGP ? I am about to buy them buy still hesitating .. I just dont wanna regret buying them so I need to know a lil more about them like if there is disadvantages . thanks again

[@hataaurider]

Wow Wow on snow.....and have a nice day for your bike

[@nautilus1753]

I want that bearing removal kit. Do you have a link for it? Also, great video ib. Another season with a great start!

[@Skr-gb4hk]

Nautilus 17 bearing removal kit is made by Motion Pro.

[@nautilus1753]

Sk8r007 1 Thanks

[@samgab]

So, would you say it was *"NICE"* by any chance?

[@jamesperreault4506]

thanks for the tip with the heat..it was helpful

[@hamad1979]

thanks for the video .. does it break easily ? cuz we got lots and lots of wholes here in my country .. I dont wanna break mine .. thanks

[@Navs126]

Loving it! Keep it up 650ib!!

[@zardportugal]

Beautiful set of wheels.

[@blindasabattt]

Ur man makes it look so easy.

[@klaivert6668]

Damn those wheels are stunning ib

[@cliffcares6455]

You have a part number for the ceramic bearing kit?

[@AGGY_D]

What psi should the tyres be on these wheels for road use front and rear please.

[@650ib]

38R | 32F

[@ajose223w3]

How much weight would you save from HP wheels to carbon?

[@evandynandar9183]

Hey man is cf wheels strong enough to endure on the street or only use in track? Why do you choose bst over the rotobox ? Thankss

[@Redliner98]

wow you deserve more subs and views man !!

[@650ib]

Thanks and I agree.

[@savage636stuntz3]

This is going to b a bad ass bike! Can’t wait bro!

[@541sethisaacs]

Quick question guys. I have a 2016 bmw s1000rr premium package (with the forged hp4 wheels). After seeing this I got some used bst carbon fiber wheels already outfitted with hybrid ceramic bearings. I got the rims and hubs. My question is can I use my oem sprocket and carrier from my oem forged hp wheels? Or so I have to order an aftermarket carrier? Thanks very much. Love your videos

[@650ib]

You'll need bst sprockets Sir. Please order them from www.brocksperformance.com and tell them I sent ya.

[@541sethisaacs]

@@650ib ok than you, I will and I'll tell them you sent me.

[@brianjacobsen5762]

If your going to c/f wheels ceramic bearings. How come your not using nitrogen?

[@650ib]

We will use nitrogen in the wheels.

[@brianjacobsen5762]

Thanks 650 ib didn't see whole vid. Enjoy your vids can't ride broke t9 vertebrae adjusting float level my 88 kx 500 getting ready run. My first desert 100 running fat cleansed it out little too much went to test no gear ( not recommended) flipped it 3rd thinking about taking my 750. Gixxer motor it's older in. Karmin gia roller wish I had 1000 rr bmw in vw thannks

[@homehome6739]

Hey Mr 650ib. We love you.

[@650ib]

Thanks!!!

[@vr___46]

May I ask you is it safe to heat the hub of the carbon wheels?

[@corberetto]

can i use this carbonfiber wheel on the s1000XR ..?

[@tainis1996]

What was the weight difference?

[@ralphralphin]

Zack is good, dam good.

[@thesicillianbull]

How long in the freezer ?

[@650ib]

Overnight

[@RIDINGWITHRALPH]

I wanted to see weight differences

[@650ib]

It's in the video...

[@karthikgundavarapu2649]

@@650ib i watched twice where did I miss? I did not see the weight diff compared to stock wheels.

[@hartwinfritz]

#650ib where/what site can i buy a tool like that to remove wheel bearings ?

[@jialongsoong2209]

Bst carbon easy to break anot ?

[@galratner]

Yes please!

[@scottkline2539]

Hay ib love the channel and have been riding most of my life but have been on the dirt last few years,but the wife said if i win one i can get one again..lol so wish me luck love what u do.

[@650ib]

Good luck Scott!

[@tokenizegames]

How much ceramic bearings

[@tokenizegames]

Where do i bike ceramic bearings

[@Enonymouse_]

Mining this for ideas on modding my own bike. :)

[@seand2022]

I keep a small amount of 180proof booze in a container, every time I do bearings I just grab some dry ice from a co2 tank, drop it in and turn it to poor mans liquid nitrogen. Drop my bearings in, 45 seconds later they drop into even rusted hubs.

[@RideByNight]

That stem core tool that torques to spec is cool as hell. Where to buy?

[@Skr-gb4hk]

johnj189 it’s made by gearwrench.

[@RideByNight]

Thanks!

[@TheSpeedBug]

awesome brother! keep it going

[@650ib]

Thanks man! We need to do a V4 SMACKDOWN soon!

[@TheSpeedBug]

650ib hell yeah brother, that would be awesome! Your smack down vids are dope! Maybe we can coordinate something sometime. Ride safe my brother.

[@dimaskresna2079]

Is it still snowy there on april Mr ib?

[@650ib]

Yes, it's horrible weather.

[@Sequel7]

650ib this is gonna be real track bike with those carbon fiber wheels

[@offroadfreak8582]

It is 30 degrees celcius in the netherlands 👌🏻

[@busablack1]

650ib, great content! I just want to know why another BMW?

[@650ib]

Zack can only work on the S1000RR and CBR 1000RR.

[@busablack1]

650ib got it. CBR next?

[@MegaErnieMAN]

Win win 1$

[@Woask_]

like for using celsius!

[@homehome6739]

15:05 WHAT IS THE FUNCTION OF THE CYLINDER BETWEEN THE BEARINGS. IT DOES NOT FIT IN THE INNER CIRCLE OF THE BEARINGS, I SEE NO FUNCTION FOR IT. ANYONE?

[@homehome6739]

I guess it is there to guide the pin that goes between the bearing when installing the wheel.

[@homehome6739]

Thank you

[@lemmetellyousomething679]

He's one cool guy 👍👍👍👍for him

[@motoshopoldskool]

Good video

[@650ib]

Thanks man!

[@dmtb1857]

Next bike build series is going to be a Honda CBR1000 ;)

[@rmonified]

LOL

[@sunnice2]

Siiick

[@rcfrenzy6477]

LUV IT.

[@puffadderglowkit3126]

bad to bone , most people wouldnt..but id paint them

[@TheMustangGuy]

I want these wheels on my kawasaki zrx. They would cost more than my bike is worth lol

[@Luckky-13]

Good STUFF!!!

[@650ib]

Thanks man!

[@jonathanbsm]

The michelin are alot better, try then.

[@allentbradley7711]

Can I add my dollar now lol love the new bike build

[@ricardorath8853]

I have to be honest and say that I am a little annoyed with how you say that you will make the bike available for everyone watching the videos but that you actually have to live in the USA to have a chance to win the bike and there are people who are watching the videos but don't live in the USA so you can't say that you will make the bike available for everyone watching the videos

[@650ib]

My sincere apologies Sir. The government won't allow me to export the bikes outside of the 🇺🇸.

[@ricardorath8853]

650ib I understand that and I don't meant it negative and I meant it more as positive criticism but maybe you can take this into consideration with the next season or even in the next episode because I still love the videos even though i can't participate in the giveaway

[@racermotovlog8380]

BMW s1000rr

[@ambertomlinson9884]

nice vid

[@650ib]

Thanks Amber.

[@rickt.223]

There are a lot of things I hate about California... But weather is not one of them.

[@ducati0362]

wow

[@HieuTrung-hq8tt]

Cho thêm phần tiếng việt ik a

[@MattJones675GR9]

Why don't you fund these 'bike builds' yourself instead getting other people to pay for it ? id rather spend money on my bike then someone else's

[@650ib]

Interesting... So, I'm supposed to buy the bikes and parts and give them away to people for free?

[@MattJones675GR9]

650ib I'm not saying give away anything for free. I'm not a fan of the whole Patreon fund me etc etc

[@MattJones675GR9]

my point is of sorts is. if someone can't afford to buy and modify a bike themselves then their certainly not in the financial position to pay for insurance and the running costs. if that makes sense

[@650ib]

I see your point. The purpose of the New Bike Build Series is to produce educational, fun filled videos showing how to install parts and service the bikes. The people that support it have an opportunity to receive the bike at the end. I think it's going well.

[@bradjean4486]

Brickstones rs 10 garbage tires lol

[@steelers19727]

Will you do a go fund me account for some carbon fiber wheels for my gixxxxxxxxer1000?????? Lol