Buckin’ Billy Ray’s Crew Cab

[@BuckinBillyRaySmith]

I don’t how I didn’t see this. Morgan thank you for the extra effort you make .. including filming and uploading. Sooooo excited

[@jirusjirus9322]

A real man working with real tools on real metal... this is unreal 😂🏆🧤🌲 Great work...BBR restoration network.

[@rareaussie6960]

G’day mate from Australia 🇦🇺 your a true craftsman and there isn’t many true metal shapers around anymore ! I really enjoy watching a true craftsman at work and I put you on top of the pile 👍 Morgan my father and grandfather were old school boilermakers and I guess it’s kind of metal shaping as well ! I became a boilermaker myself and I studied blacksmith work! So you can see where I can say you have to be one of the best Iv ever seen in your trade 👍 no you don’t have to vlog to prove how good you are! But I believe there are many young men out there who could do worse than following a true legend tradesman as you are and they to may become metal shapers and keep the dying tradition alive! Thank you Morgan for your time and dedication to your trade! Kind regards 👍🤟🇦🇺🍻🫶

[@juliomcdermott4696]

Beaudy mate.

[@WildWestGarage]

I’ve always appreciated the people who are willing to show their craft and encourage others to do the same

[@Blackfox_Kid]

Morgan you're off to a good start on the Crewkie. Takes skill to do what you've done so far and I'm sure everyone on the Buckin channel is most appreciative. Good job sir. Blessings on the rest my friend.

[@chichitex1252]

I love watching an artist in his element. I appreciate the work and brain power!❤❤❤

[@richardfrost7575]

Your doing a good job with what you have. After market parts and even factory parts don't always line up as well as they should, heck I got a new factory oil pan for a V8 Chevy monza got it all together tested everything ran it put it back on the rack to check things, ended up having a leak at the lower front roll in the middle of the pan all one peice of metal, microscopic hole about one drop when hot every 10 minutes, had to use the paper towel trick to determine it wasn't from above, lost my but on that job factory wouldn't even through in a new gasket set only the pan replaced and had to send a picture of the leaking in action to even get that. Now that wasn't a line up problem but it had me scratching my head for a while and cost me 2 days extra to do the job with no ethical way to recover my losses. Keep up the good work ❤❤

[@WildWestGarage]

Not nice when thing go like that. I would send them a bill anyway.

[@richardfrost7575]

It was back in the early 1980's when you could still get factory parts for them I don't remember how many V8 monzas were made ( used to) but it wasn't many and I did try called the factory on the dealership phone and couldn't even get a deal on the gasket kit.

[@fmcmillan08]

Your gonna make that buckin one happy man!

[@martyrutter3630]

Every job has it’s challenges you just look at them and come up with a fix and move on. You are at your best on this one Morgan. Looking forward to what you will do next on this one. ♥️👍

[@justinweaver8107]

Woohoo ur a real craftsman sir much kudos an respect.

[@RobertFredman-ld6kc]

Thanks for sharing this with us

[@lonniechartrand]

Nice job Morgan! Nothing wrong with using "bought metal". The challenges were still there, which allowed you to use your skills.

[@followthegrainfirewood4525]

Great Video Morgan! Thanks for filming and taking us on this ride with you. Appreciate all your hard work and sweat and tears into this project for Buckin! Keep up the good work, Stay Safe!🪵🪵

[@jasonthomas4738]

Great work thanks for explaining

[@paulgreco2188]

Good to see you buddy. Yer damn good at what you do😊

[@user-bm2wv6gv7w]

Hi Morgan . It’s great to see you start working on Buckin’s Crewky . Can’t wait to watch yours and Buckin’s journey on her . I watched the. Videos on your road trip to pick up the cab . Now to watch the next phase of restoring her

[@naturundhund]

Nice Job

[@matthewking2209]

Looks great.

[@Alexhulk]

Super cool Morgan

[@darrenyoung4893]

yesmorgan been there before sounds good when your buying them keep it going youll get there

[@steveyoung9104]

Master metal shaper🎉🎉Morgan

[@davidhuffine5084]

Good to see you again , Morgan . I have no doubt it will be fixed up properly . I have the work you do . No worries . Seeya

[@stevetheriault4164]

THE RESERECTION OF CREWKIE 😁👍👍SHES GONNA BE A BEAUTY TAKE CARE MORGAN

[@robertblacksmith4355]

Great video and more to come 👏

[@bl8297]

Good to see your SMILING FACE!!! 😊

[@hankclingingsmith8707]

Hey buddy good work

[@Bg1111ghk]

Nice job Morgan!

[@donnywalker4691]

Good job that’s a big project

[@WildWestGarage]

Thanks Donny, we’re just getting started

[@westcoast8562]

HUGE JOB

[@ronsilva516]

Ya my self I hate those old after market parts they don’t fit right I have run into stuff with my old 1982 c-20 Chevy truck

[@Dunlap-uj5zl]

👍

[@westcoast8562]

the dewd has worked a few pop cans in his time

[@Timberjack.loggers]

Interesting!

[@davidpetrus1748]

wow that wasn't bad it only took around 15 minutes you should have it painted by the end of the week he Hehe he only kidding i do it for a living if people only knew not everyone appreciates the work that is done but after a while you get used to it I'm sure you know this by now take care and enjoy it when yer done

[@WildWestGarage]

Warp speed ahead!

[@pm270100]

well well well that tin work made by them over there looks close to NFG //but you will get there

[@gaudenzschneider316]

Hi Morgen👋 Nice to see you both doing the Cabin going🎉 I had a question about a muffler mod for my 562xp mark 2. Can i order a muffler from you or isnt that possible? I life in Germany so sorry about my english😂 It would be nice when you answer me, good bye and stay healthy greetings to you, bye Gaudenz

[@WildWestGarage]

I have pipes for that model available here www.wildwestgarage.com I have made provisions for shipping within North America but have no idea what it would cost to ship to Germany. If you do decide to purchase a pipe please contact me at [e-mail] before ordering.

[@gaudenzschneider316]

I wrote you an email....

[@waynetharp]

Howdy,Morgan! Did you get a tetanus shot before starting on the ole Ford??🤠

[@WildWestGarage]

I’m immune

[@waynetharp]

@@WildWestGarage 🤣🤣 Look forward to the project!👍👍

[@marcduclos9789]

Is it extra $ if the owner helps?

[@WildWestGarage]

😊

[@pm270100]

coffee

[@WildWestGarage]

Thanks Bill!