The 'Trailer Trash Malibu' getting into the 8's in the 1/4 mile after crashing the car the weekend before and thrashing all week. For those that know the Crust Nova, this is his son. Congrats to the 417 Motorsports Crew!
Пікірлер: 453
@indyguy34008 жыл бұрын
stock Ls motors handle 1000hp all day. Gm wasnt fucking around when they built these motors to be strong
@indyguy34008 жыл бұрын
Google hot rod big bang theroy
@ImKittyCow8 жыл бұрын
Everyone's seen hot rod big bang theory, what id suggest you look at is any of sloppy mechanic's videos, specifically the one about the aftermath of blowing his motor on the strip thanks to a wastegate failure. he clearly shows that the rod absolutely shattered thanks to 30 psi of boost, but the rod bolts (which he had re used in three different motors) held up perfectly fine after dozens of 7000 rpm runs
@indyguy34008 жыл бұрын
If you read the article it says they did close to 60 pulls on the dyno at or over 1000.
@steveg22777 жыл бұрын
piston skirts, rod bolts, wrist pins, and rods are issues that high up.. crankshaft however is a true survivor.
@frankhuff48067 жыл бұрын
Rizo check out sloppy mechanics colorado getting close to 1000 rwhp in a stock 6 liter. That motors been beat on and beat on.
@jordanberry48247 жыл бұрын
That turbo was massive! Those air to water coolers are no joke. If he had dry ice and rubbing alcohol it probably would of went mid 8's and probably 6 more M.P.H. But that's fast enough 8.90's @ 150 is no joke👍👍👍👍
@HigherWisdom7 жыл бұрын
Really awesome car! When he hit 8.90 I let out a spontaneous OH YEAH that startled my cats. Congratulations guys!
@Cervan8 жыл бұрын
that was a beautiful launch on the 8.90 pass, brought it up high and set it down soft.
@MrBogeyone8 жыл бұрын
That launch was straight as an arrow. Just a little drift when she sat down but other than that, beautiful.
@gerryvillemaire16356 жыл бұрын
it was a beautiful launch, put down so gently!
@RGIIIBOXING4 жыл бұрын
In the old days..we would weld chains on the frame and the shock tower..this would help keep the travel of the car down...you lose Alot of momentum going up then trying to steer the car...if you go into the other lane you lose the race and your time doesn't count either...**ONE#1**
@quancars95695 жыл бұрын
Best part about that car, it wasn’t a puff of smoke that came out of that exhaust. That tune is on point, great work guys!!
@k9forkids6 жыл бұрын
a $2500 water to air intercooler and intake is not quite Budget.
@JBarnes9174 жыл бұрын
Or those baller front runners
@Reggie-The-Dog3 жыл бұрын
Compared to a lot of these cars it's a budget build. The car itself is nothing special. It's all drivetrain.
@dutnu23393 жыл бұрын
@@Reggie-The-Dog at least one of these guys got there head on straight
@joedanero8 жыл бұрын
He's going the distance. He's going for speed.
@Charlesbjtown7 жыл бұрын
joedanero I see what you did there. Cake?...
@HighlanderNorth13 жыл бұрын
But at least he's not all alone in his time of need....
@longriflesinc.99706 жыл бұрын
I love it man. Flyin on the cheap! A buddy and I are doing the same thing this winter. Very cool.
@maxwolthuis5 жыл бұрын
Dude watching people pr and hearing friends and family celebrate will always make any shitty day better!
@alansmith78337 жыл бұрын
long live the ls motor, and got to credit the initial set of car, watch pre launch squat, there is a lot good there, job well done GM
@goldsilverandiamonds8 жыл бұрын
8.90! That is a bad ass budget build! Great job!
@JrJohnston709 жыл бұрын
Way to go Andrew, Shane and Blake..
@62deuce429 жыл бұрын
Thank you for keeping track of us and all the encouragement
@JrJohnston709 жыл бұрын
+62Deuce I have followed Crusty from the start, glad to see it's a family thing now... lol
@calebgrant71764 жыл бұрын
Lol I thought u typed shake and bake lol
@stevesolo168 жыл бұрын
You proved you don't need a $30K engine to roll some big numbers!
@drewt10816 жыл бұрын
That is F-N incredible! Most people spend upwards of $25K to go 8.90.
@johndillinger38518 жыл бұрын
Dude great pass ! Never mind al these turds talking smack your doing it and have the videos to prove it . Where's their cars ? RIGHT !
@kcp6298 жыл бұрын
WOW!!! a shock LS block going in the low 8s, magnificent
@AaronKiss8 жыл бұрын
"Budget Built" I need his budget
@triggernutsy18 жыл бұрын
my first thought was,turbo isnt a budget build lol
@jickdawmonelason72398 жыл бұрын
Aaron Kiss you can do this shit for less than 5 thousand dolllars guys. the biggest thing needed is an imagination....
@AaronKiss8 жыл бұрын
Ted Dow not gunna argue there. Imagination is what makes the whole build enjoyable to me
@RizoProduction8 жыл бұрын
+Ted Dow For a single person that works a 9-5 job raising a family, putting food on the table and paying bills, $5,000 is not a budget.
@jickdawmonelason72398 жыл бұрын
RizoProduction time to make more $. Again, imagination... I did it......
@colehara4 жыл бұрын
Love those G body cars. Great weight transfer.
@JOSEALEJANDRORAMIREZ-gj5kb7 жыл бұрын
AMERICAN MUSCLE BRO PEOPLE DONT KNOW ABOUT THE 5.3 BAD ASS ENGINE🖒
@marsdenbalaska7848 жыл бұрын
It launches Nicely ! That's how ya do it!
@davidthomits3537 жыл бұрын
5.3 LS Motors are good Motors
@MindCrime5507 жыл бұрын
Did the transmission get mentioned? That thing doing all the work and getting no love.
@andrewmcclelland63817 жыл бұрын
criswellwj the transmission is just a stock th400 with a hipster brake.
@donrutter67657 жыл бұрын
+Andrew McClelland Stock, lol.
@wheeln24-796 жыл бұрын
That looks like a fun time! One thing I would do that car is replace all the glass for plexiglass windows. Unless he still takes it to the drive thru then ok I see why.
@gerryvillemaire16356 жыл бұрын
i have the same car, getting a 6.0 LS soon with 4L80e trans (running donor vehicle). i figure im way past halfway there in cost, just need a turbo and a strong rear end. this is what orgasms are made of!!!
@davidbrennan58 жыл бұрын
Saw an early eighties Malibu wagon at the strip one time. It was beating up Mustang foxbody's all day lol. He spent most of his money on the engine.
@bryanroupe86464 жыл бұрын
This is how we use to stage before bump boxes were a thing. When you see the car squat before the hit that is him going from high to low gear.
@spooln309 жыл бұрын
For a thrown together car it's pretty quick. Just shows you don't need a expensive best of the best car to pull quick times. Great job guys!!
@mrjasonm.73979 жыл бұрын
don't let what they claim fool you, this car is well put together. I don't see it being thrown together. just my opinion
@spooln309 жыл бұрын
Imo it looks thrown together. Decent parts but there's no detail work. Like something put together in a weekend.
@flinttown49357 жыл бұрын
bad ass bro do your thing..for all of us low budget guys
@zetareticuli4037 жыл бұрын
its almost like the more it wheelied the better the time, those launches were gracefull not too much wheelie but just right and back on the ground before the wind becomes your enemy.
@Smittyschannel7 жыл бұрын
yep; if they started slipstreaming the car they could get those times down even more
@TheJosephayal9 жыл бұрын
faster than a 180k GTR
@jamesfoster35898 жыл бұрын
+ZoniacHD not when you understeer into a tree
@jamesfoster35898 жыл бұрын
+ZoniacHD I do you are implying that this car is only good in a straight line but I'm saying you'll understeer into a tree and he'll oversteer into the crowd if you were to try to race at a track
@jamesfoster35898 жыл бұрын
+ZoniacHD lol
@fmradioman18 жыл бұрын
+Magic Illusionist 180k GTR wtf r u talking about? GTRs are not that expensive
@Zankaroo8 жыл бұрын
This is a dumb comparison, one is a purpose build drag car that cost money rather than make it and the other is build to perform in general, be easy to drive, be comfortable for daily use, and above all make Nissan money. Its been a well know fact that you can buy and build a car that is fast down a drag strip for super cheap if you know what your doing and where to get the parts you need cheaply, even if you pay someone to do the install/fab work.
@brandonobaza86107 жыл бұрын
Nice BaconMaster muffler. (That's a homemade glasspack for those who never watched Muscle Car)
@hypersports47964 жыл бұрын
Congratulations on the 8.90
@construmulti9 жыл бұрын
Congratulations! it's very evident work
@SLIMZD7 жыл бұрын
That 8.90 pass was so smooth
@johnbehneman15464 жыл бұрын
I am impressed!!! Thanks for sharing!!!!
@scottsteward13066 жыл бұрын
Nice we just picked up a clean running 5.3. Need something to put it in...
@dermainemitchell84838 жыл бұрын
Thats a badass build. Gives me some ideas for my 76 camaro
@evilswingythingy8 жыл бұрын
prepping my 80 firebird for a ls 5.7 at the moment. same bodytype
@wheeln24-796 жыл бұрын
I need a project like this. And a extra 500 a week for year or two...
@ruipires79545 жыл бұрын
That's controlled EVIL right there!!! Sweet ride!!
@babiixoxbritty7 жыл бұрын
This is why the ls is the best engine ever made. And I'm glad he didn't put it in a shit box mustang. G bodies are a much better choice.
@henryhopkins86456 жыл бұрын
babiixoxbritty lmao if they could afford a coyote they would use one
@brendanmccarthy4926 жыл бұрын
Coyotes are no match against ls series engines.
@motherlovinsnuffstar6 жыл бұрын
@@henryhopkins8645 You mean if they could afford a coyote and afford to have the block resleeved.
@henryhopkins86456 жыл бұрын
BolognaTheTiger that too haha. Coyotes are just really expensive
@rollinthunder77726 жыл бұрын
Putting one in my Foxbody much better then shit box mustangs
@slimelines43946 жыл бұрын
Lol idk if I would say a Holley high ram is quit the budget intake bruh
@chuckybooker1964 Жыл бұрын
SHE'S RIDING!!💪🏾💯
@Smittyschannel7 жыл бұрын
That track looks pretty sketchy, esp. at the end. So how budget is budget? would be interested to see how much they have in this car
@thomashodis57407 жыл бұрын
@urban hillbilly videos , hey can we find out how much e had invested in his build? as far as engine, trans rear end and turbo system
@stevenhorsefield29098 жыл бұрын
congrats on the 8.90 love the bu... I'm building a 79 one day ill have it done. what size tire an wheel? I did a max notch an wondering what I can fit?
@OfficialDatzMe8 жыл бұрын
What rear end gears? and what size turbo? What cam?
@Smokey-885 жыл бұрын
It's an 88 mm Borg Warner turbo.......... I learned this from watching the video above.
@davecoxx70825 жыл бұрын
Hardest part was getting a g body to stick and track like that..nice job
@Sean-i4r5 ай бұрын
With a 200 shot in nitrous.After second, gear hits that car would run in the 8 50s.No problem, congratulations.I loveput a scramble button on that thing with a hundred and fifty shot or so
@jkingsrd18 жыл бұрын
Hello I have a question ..how much boost ? and are you running stock valve springs? thank you for your time joe
@tragiclife97604 жыл бұрын
Very impressed,awesome suspension set up,but if you look close ,,,not budget at all,not mine anyway
@dylananderson8422 Жыл бұрын
Ya the only thing budget is the motor setup . It’s honestly still a simple / light front end setup that knows how to hook and book . This setup would do amazing in the street
@doylee4695 жыл бұрын
One second faster then a stock second gen vmax, craaaazy
@christianhinojos18619 жыл бұрын
los felicito su canal es 100% adrenalina...quiero saber que motor trae ese malibu?
@gungfuriceboy3 жыл бұрын
i currently have a 'stock' 5.3L in My '71 Nova as well! So potentially i can GetR to GO THIS FAST!!?? WOW!! ..need The Engine Details!!! Cheers!
@jasonvankirk60556 жыл бұрын
What's up I think that was awesome man pretty fast for what it is awesome great car have a good one
@electrochubb6 жыл бұрын
Really amazing, how much boost y'all runnin'.?
@Kallanev7 жыл бұрын
Very respectable! I enjoyed the video. What fuel were you running at the time of these passes?
@shanemcclelland22907 жыл бұрын
Roger Beard pump E85
@marcuslimbaugh45927 жыл бұрын
How much do i make the check out for to copy for an 83 camaro?
@jackthompson13826 жыл бұрын
Oh man... couldn’t have started the vid out any better with comfortably numb’s second solo
@williamromero44455 жыл бұрын
Goes to show LS is king. 💪
@infamousnova4 жыл бұрын
I'm trying to figure out how they mounted the radiator
@greiner74144 жыл бұрын
infamousnova Yeah just noticed that, pretty cool for a drag car application
@ron_burgundykc44688 жыл бұрын
Does the block have any work done to it to make it stronger? Like head studs and etc? And how much boost is that block taking? And I'm assuming the car is heavy..?
@bcubed722 жыл бұрын
Those cars are surprisingly light for what they are. This was built post-OPEC, so it was light. Also, the lack of crumple zones, etc, means it's much lighter than a modern car of similar size.
@bcubed722 жыл бұрын
Internet has it at 3400#, stock. For reference, a modern Mini Cooper S weighsin at 3,000.
@calvinwilson10513 жыл бұрын
I take my hat 🧢 off that’s awesome 👍👍👍 what transmission you run in car
@slowkidsatplay87038 жыл бұрын
Sketchiest track in the world!
@shanemcclelland16348 жыл бұрын
No there a lot sketchier. George Ray's off the top of my head. Check out Ozark Raceway Parks Facebook page. Yesterday they excavated the first 300' of both lanes for fresh concrete, last week they completely reworked the runoff area of the track. I've hooked harder at this track than I have at any of the big Midwest NHRA tracks
@ryanlucero34844 жыл бұрын
Very nice car man I do have a question what transmission are you running
@jsnyara9 жыл бұрын
Great job guys!
@crossout18215 жыл бұрын
you say budget, but as soon as i see that expensive ass intake manifold, i know your lying lol
@mychannel-fm7gd4 жыл бұрын
Stock manifold work just as fine. No need for the high dollar manifold
@joer50574 жыл бұрын
@@mychannel-fm7gd except that it doubles as an air to water intercooler. Calling builds like this budget, is like eating McDonald's and calling it a diet. Sure, it is by definition a diet. A diet of something. This was certainly built on a budget. Just not the kind of budget most people think is cheap. For a sub 9 sec car, it probably is dirt cheap when you compare it to something like a Demon (new car that runs a bit slower)
@mychannel-fm7gd4 жыл бұрын
Joe R understandable
@jmoffitt367 жыл бұрын
Hell of a build and even better driver. Bet it pisses off a lot rich bastards that can't drive worth a damn
@damonbaldwin89936 жыл бұрын
Could have this malibu, a budget pickup, a budget bass boat, a budget mobile home on a 1/16th of an acre, and a bunch of beer. Or... a dodge demon
@danielbargas33777 жыл бұрын
Car has a killer 60ft
@TubT4ao7 жыл бұрын
is this stock block with good stock gm rods n piston or aftermarket rods n piston??
@benburden66338 жыл бұрын
Curious..What year is the Block and what casting heads?..Very Impressive by the way.
@ImKittyCow8 жыл бұрын
I believe that iron 5.3 heads are 862, but theyre nothing special about the combo. Use whatever stock heads you happen to get on your motor, in the LS family theyre all pretty good, maybe even give them a home porting job but dont sweat it. The real power here comes from 5.3L of displacement under a good 18+psi of boost. If you take an iron truck engine out of say a wrecked silverado for $450 complete, then clean the sludge out of it and gap the top two rings to 30 thousandths the motor will handle 4 digit hp all day. Occasionally you'll have a Gen 3 who's rods will bend past 600, but that's only some of the motors. Worst case you're pushing 1000 wheel and blow the motor, then you just pop another $450 replacement in :D
@benburden66338 жыл бұрын
Thanks for the info.. I have a2006 block with 799 heads..We will check the gap, cam, and misc..looking for 700 stong!
@sswcubes8 жыл бұрын
KittyCow the $450 for a ls engine from a wreck yard is a theory. Down here in South tx there is no such thing. All ls engines from any wreck yard are $1200-2000 no mater if it had 200k miles. Them wreck yards got greedy.
@r.joseph89117 жыл бұрын
97sswcubes 78 ditto up here in the North. Even at a yard owned by my former neighbor I guarantee I can't get a 6.0 cheaper than 1500.
@sjd73ss7 жыл бұрын
dang Im in PA you buy 5.3's all day long for 3-500 top money on 6.0 up here is 750.
@chuckg42296 жыл бұрын
Hell yeah brother!
@robbaxter27869 жыл бұрын
Congrats!
@chefgiovanni7 жыл бұрын
Are you sure that ws a 1/4 mile ?
@Smokey-885 жыл бұрын
Yeah you're right, that could have been half mile.. Aaahahahaha..
@shanesmith8174 жыл бұрын
How’s the clearance with the steering column? For the turbo header
@curtisburnham80997 жыл бұрын
working for the weekend with this car for sure
@craigpiercer794 жыл бұрын
Is this 8th mile? It could just be me but that track looks too short to be quarter mile?
@StreetSweeperTv9 жыл бұрын
Yeahhhhhhh buddy!
@demarques19118 жыл бұрын
that 5.3 is probably better for racing than a 5.7 or 6.0? that thing makes power everywhere and turns higher rpm easier than a longer stroke can could?
@chevydodge888 жыл бұрын
5.3 and 6.0 both love boost
@RB25luv8 жыл бұрын
And 4.8 love boost to
@ImKittyCow8 жыл бұрын
5.3, 5.7, and 6.0 all have the same stroke length! The only exception is the 4.8 and you'd be correct in that the smaller stroke length allows for more RPM than the others. However i would still prefer the non 4.8's because the 4.8 block has a very small bore and restrictive heads. I have seen people put the 4.8 crank into an LS3 block with aftermarket rods and make 8000 rpm monsters though that's far from a budget build
@internallycombusted18 жыл бұрын
4.8 and 5.3 are the same block and same bore. the 4.8 is the shortest stroke of the ls engines. and also has the longest rods!
@tonyblack35407 жыл бұрын
KittyCow 4.8,5.3 have the same bore size 4.8 shorter stroke
@blownpoppm7 жыл бұрын
Budget build and his got a 417 intake intercooler 😂😂🤣 nice build tho.
@shanemcclelland22907 жыл бұрын
Philip Monaghan we developed that intercooler. That is a one off 1.5” thick core on a Holley Mid Rise
@s.v.gadder14435 жыл бұрын
You can buy the core for like 50$ the scrap aluminum for about 50$ two a/n bungs-15$ weld it up and guess what about 130$ with welding supplies
@hulaganz5 жыл бұрын
Mikel Bentley I'm with you. I do this stuff everyday. But I have a welder. The skills to use it. A tool filled garage. Time to do it. Just the experience to build and tune takes years. So budget is a relative term. Like when Jimmy Hendrix says that lick is easy... Then I can't play it. I'm pretty sure Hendrix would have a hard time fabbing up an intercooler. Let alone breaking 9 seconds, on a budget.
@crripper97702 жыл бұрын
remember kids, budget built doesn't mean it was cheap
@sk8erman2298 Жыл бұрын
Actually, this car in particular in this stage of it was still around 7 or 8k, most expensive parts being the th400($3500 w/ converter), intercooler, turbo and lots of other parts were used so lots saved there and another $700 on a holley system when they were on sale years back, some chin-lee head studs, 2x walbro pumps, I wanna say stock e85 gm injectors but not 100% there, internals are just about completely stock, just cleaned and clearenced in house(literally) we fabricated just about everything on there so no labor cost to us
@crripper9770 Жыл бұрын
@@sk8erman2298 yeah and for a 8.90 thats really good! but them chin-lee head studs musta been related to bruce-lee to make it through a 8.90 pass lol can't go wrong with a Ls but yeah not cheaping out on trannys is always a must in my opinion or you end up spending more in the end lmao
@orionfixr77137 жыл бұрын
Just plain wicked!!
@thenitroviper61497 жыл бұрын
Can you find out what the budget was for this? OR do you know where that is listed?
@shanemcclelland22907 жыл бұрын
Thenitroviper that’s a lot of used Parts accumulated over several years but it could be duplicated pretty easily for around $15,000 complete. Low budget is relative to an 8 second 1000hp car that completed Drag Week twice and stays together.
@Syrus549 жыл бұрын
Budget my ass... That Turbo ALONE is several Thousand Dollars.
@danthill0079 жыл бұрын
+Syrus54 To run an 8.90 in the quarter that definitely would be considered budget. I have over 30k in my car it runs low 9s. But then again it is show quality and a much more desirable car. I built it late 90s, today it would cost more to build
@theenglishfam58778 жыл бұрын
that turbo is $1400 from Summit, less from private vendors
@NSGDUB8 жыл бұрын
+mindy mcclelland whats the name of the turbo?
@21stOPFOR9 жыл бұрын
Ozark track is 1/4 mile? Been years since I've been there. Thought I heard it went to a 1/8 mile.
@shanemcclelland16349 жыл бұрын
It's quarter but the back half is short and rough
@urielpaz92239 жыл бұрын
are yah still using a GM computer? that's a sweet ride
@shanemcclelland16349 жыл бұрын
Holley Dominator EFI. The most expensive system and the best investment on the car
@turbo_ivo8 жыл бұрын
+Shane McClelland early trans, no meth. i wonder if it can be done with an HP as opposed to the Dominator? Am I missing something?
@kreegak38028 жыл бұрын
nothing to do with track prep lmao that track was so sticky he did nice wheelie
@TbsDltn4 жыл бұрын
with that big of turbo on the LS there is no doubt that it can run 8 secs in the quarter!!
@atypical_moto7 жыл бұрын
More boost....more boost....more boost.... 8's woo-hoo!
@markgarcia49268 жыл бұрын
What power steering pulley you use..because stock ones hits nut on gear box
@shanemcclelland16348 жыл бұрын
It had stock truck power steering, but now has/had in video TRZ rack
@mikepeterson17918 жыл бұрын
Is is safe to assume that the radiator arrangement is intended to provide some passive lift? You guys clearly know about getting traction, so I would suspect you were counting on some lift/weight transfer at the top end which would allow more boost at the higher speeds. If this was all part of the plan, very cool idea! And congrats on putting that brick in the 8s. Going fast IS looking good!
@shanemcclelland16348 жыл бұрын
The radiator placement is to move the turbo to the center of the grill.
@cavalierthompson97438 жыл бұрын
that's great shit!!!! great runs man
@tylerwabnitz79338 жыл бұрын
do ls engines come stock with forged internals or something? sorry if this is a dumb question.
@BowYangJam8 жыл бұрын
Nope. They come with mild steel internals like most v8's. This one just had the bottom end rebuilt.
@tylerwabnitz79338 жыл бұрын
yeah I just hear of a lot of people having crazy success with boost and stock internals, figured it was forged or something. Thank you though!
@BowYangJam8 жыл бұрын
Well you can run like 10-15lbs of boost on the stock ones. Forged internals aren't always necessary. no problem my man.
@BowYangJam8 жыл бұрын
Not all rods are forged. Not a lot of engines came with cast rods, but they do exist.
@BowYangJam8 жыл бұрын
A handful of other engines too. I think some foreign engines like volvos and mercedes had some engines with cast rods.
@kreegak38029 жыл бұрын
Holy shit that thing was flying
@jimmylowejr65833 жыл бұрын
Tooooooo sweeeeeetttt
@timmcneil15367 жыл бұрын
Sweeeet, very nice!!!
@Caprice19778 жыл бұрын
What rearend are u run the 7.5 or you modified it
@ImKittyCow8 жыл бұрын
I'm not sure about this car specifically, but the 8.8 rear ends from ford explorers can be found very cheap and have 31 spline axles while the mustang 8.8's before 2005 only have 28 spline and are weaker because so.
@ljuice279 жыл бұрын
What kind of shocks u running in the front?
@shanemcclelland16349 жыл бұрын
Used double adjustable QA1 coilovers
@ljuice279 жыл бұрын
+Shane McClelland thanks for the info what about the rear what do u have
@ljuice279 жыл бұрын
I have a 87 Monte Carlo and it runs good just need to get it to launch like that check it out on my page if u get a chance
@starbattles17 жыл бұрын
Bravo! Love it
@greiner74144 жыл бұрын
Oh now I see the radiator!
@edwardboyer71025 жыл бұрын
When your dad throws ya bone an you run true an straight 8:90 in ah dumpster just thank him