BUDGET COLEMAN GOES 40+MPH FOR LESS THAN $100??? (Hisun 196cc Budget Build)

Today I find the cheapest performance parts on amazon to find out how fast they can make an old Coleman 196cc engine
VM22 Clone kit: a.co/d/0cHf7yqB
Header Pipe: a.co/d/04nkEKic
Cast Aluminum Flywheel: a.co/d/08Yj0MCz
18lb Valve Springs: a.co/d/070fl51i
Song: Pyrosion - Day In Paris
License: Creative Commons (CC BY 3.0) creativecommon...
/ @pyrosionmusic8562
Music powered by BreakingCopyright: breakingcopyri...

[@mattsmith2072]

Randomly cranking in side cover and head bolts with an impact is wild. 😮

[@Deucealive75]

Very cool. I did similar earlier this year. I used a stock 196 with a VM22 clone and header pipe with a mini 91 silencer. Nothing else. Ran it on my Coleman with a torque converter and 9/60 gearing. Ran well with a 120 main but I didn't run it to top speed. Fun bike and made me wonder why I did engine builds. For the flywheel in the ad they say advanced ignition but are not specific. Those are timed to around 18 degrees. Your bike might be a touch faster with a 10 degree key. I have a couple of those and timed them to 32 degrees with a timing wheel and no key. I've only ran one of my 196's to top speed. It went to 47 MPH topping out right at 5K RPM with the above-mentioned gearing. That was a mild build. CL1 cam and Champion rockers. Had a stock carb at the time.

[@hottrodd1090]

thanks for the video. what gas tank is that you have mounted? need one for my grandsons mini bike.

[@nszabados]

@@hottrodd1090 4 liter motorized bicycle tank off of amazon. i welded a 1 inch piece of conduit to the frame and i strapped the tank to it. there is a tank they sell on amazon that’s a direct bolt on with no modification but it’s pricey!

[@Bataha]

Great build. Most vm22 clones come with a 95 jet. I drilled mine out to a 120 and it ran way better. I recommend you do the same. I used the Harbor freight $10 rotary tool and $4 micro drill bits set.

[@flowermama1123]

It's the cat peeking out from the blinds for me :)

[@nszabados]

my babies love to be included

[@xqrop]

bro ong we running damn near the same setup except i got the jackshaft and a 40t rear sprocket. i’m thinking about putting 18lb springs in bro but how u feel about that with the stock rod?

[@nszabados]

@@xqrop don’t trust it. would definitely recommend getting a billet rod.

[@xqrop]

@@nszabados fasho fasho💪

[@justinkase7307]

Plz tell me where i can get everything i bought 1 for 200 but they sent me thr money back😢

[@nszabados]

amazon! every part i used i linked in the description

[@justinkase7307]

@@nszabados no kidding

[@jasminealameeri]

I see my kitties made an appearance

[@nszabados]

@@jasminealameeri they dang near stole the show!