Budget Gun Case from Harbor Freight Part 2! Cost Effective Upgrade and The Guns Inside!

[@RandoWayne]

Thanks for watching! I appreciate the tips viewers added in my last video so decided to try it out myself. I truly appreciate all the input and I encourage you to continue sharing. Be safe out there!

[@LuckyDogGaming]

Hell yeah!

[@davehorlacher]

Great idea.. I cut a tiny slot in the foam on the bottom and glued in a AirTag in all my cases..

[@RandoWayne]

That’s a great idea! Thank you for sharing! Take care

[@Joker-ny7jh]

Definitely doing this, thank you for the helpful tip!

[@JPE_DRAEB]

But if you can track it so can Creepy Joe!

[@davehorlacher]

@@JPE_DRAEB Just name the the AirTag "Epstein Client List" no one will bother tracking it.

[@RandoWayne]

@@JPE_DRAEB 🤣🤣😂😬😬😳

[@Gimpthulhu]

I live in humid south Florida, so I save the little moisture-absorbing silica packs that comes in packaging and throw them in gun boxes as an added protection. Those little packs can be purged of absorbed moisture by putting them in the oven at low heat (about 200 degrees) for a short period of time.

[@RandoWayne]

Thanks for the tip!

[@invictusbp1prop143]

Some of those cases have a valve on them for moisture control, but dessicant packs are always a good idea. You can buy silica gel at a science supply and make your own. Get the kind that changes color when they start getting full of moisture and you can dry it out in an oven and put it back in.

[@tdata545]

Some can even be microwaved (obviously not the ones in tins). THOUGH, I haven't had much luck with that method. Also probably should bump the oven up to at least 220, above the boiling point of water, but not too much so that it should burn the cloth-like material that some packs come in.

[@zora_tech]

I was gonna make a comment about how you can get silica gel that you can dry out. But it's best to get the food safe ones if you are drying them in your oven. Because some of them are made of some pretty nasty chemicals. I believe Amazon has the color changing food safe ones that work pretty good. If you have the money I would also recommend getting a mini oven that has a circulation fan just to be on the safe side. So you don't end up running or mixing anything with the oven you use to cook food

[@allenweber1888]

Northwest Florida here. I save those as well

[@EasyLiving8]

Hmmm, never thought of doing that to foam, thank You so much for taking the time to do this educational video, GREAT JOB! It would be nice to see how this is holding up in a year, AWESOME collection of guns, PLEASE stay healthy and safe out there!

[@RandoWayne]

Thank you for the kind words! I will definitely update over time to show how it holds up. You also be safe out there!

[@KY-np6ow]

Plastidip works great for this. Just do it BEFORE ever storing your firearm in the case. Much cleaner. Very durable and protects the foam from tearing.

[@RandoWayne]

Great tip, thanks for watching! Take care

[@arolls22]

Thank you for making this! Never thought to do this. And it’s a cheap way to upgrade!

[@RandoWayne]

@@arolls22 thanks for watching! Take care!

[@jamesdiehl9251]

Nice video I did that to one of the rifle cases for my CZ 457 rifle I did not use plasty dip gorilla mix the same product was cheaper. I did it in two layers. After was all done. I glued the two layers together. I did mine, about two years ago after multiple trips to the range still looks like new. I have done it to one of the smaller pistol cases. The only thing I did really different is I am able to get foam cut to whatever size I need and whatever thickness, I want from a local upholstery supplier that carries multiple styles and colors of foam. Very good video. I’ll give it a 10 on a reading scale.

[@RandoWayne]

Thank you so much for watching and for the feedback with your personal experience. I will definitely be gluing the layers together here soon. Definitely lucky to have the supplier nearby to get the foam cut and have extras. Take care!

[@jamesdiehl9251]

Just a tip if you’re going to do a rifle case depending on your rifle for a different size thicknesses the first layer was completely cut out in the second layer I believe was intact no cutting so depends on the thickness of your rifle go with the proper thickness. I have used that pluck style before for sensitive photography equipment. It seems to break down if you can find a supplier for an upholstery business and can cut your foam to size I would go with the upholstery foam seems to be a better quality

[@RandoWayne]

That’s a great tip! I’ll have to look in my local area.

[@jamesdiehl9251]

Just a tip if you’re going to do a rifle case depending on your rifle and if you were going to use a bipod or adding magazines, or suppressor for a different size thicknesses the first layer was completely cut out in the second layer I believe was intact no cutting so depends on the thickness of your rifle go with the proper thickness.I have used that pluck style before for sensitive photography equipment. It seems to break down if you can find a supplier for an upholstery business and can cut your foam to size I would go with the upholstery foam seems to be a better quality

[@jamesdiehl9251]

I did not cut mine all the way through for more protection in case it’s dropped and the other thing I’ve seen videos people doing this if you’re carrying the handle and you drop the case by accident most people have their scope facing down so if you drop it, all the pressure is going on the scope so if you open it up, it looks odd. The way it’s facing where the scope is toward the handle. Keep up the good work you did nice work.

[@WetDreamzOutdoors]

Definitely going to tractor supply and doing this for some of my pew pew storage! Thank you for sharing! Took a lot of guess work out

[@RandoWayne]

@@WetDreamzOutdoors why thank you

[@mikethefireman6696]

Having done the plasti-dip on multiple cases with pick-n-pluck foam, the more coats the better for longevity. The cost of additional cans far more beneficial to purchasing new foam. Highly recommend getting the spray can trigger handles. Prevents fingers and eventual hand cramping from pressing the cans to spray. Found out that on one of the large Pelican cases I sprayed...lol

[@RandoWayne]

I definitely agree the more coats the better! Yeah I’m feeling to do the larger case I’m gonna need the handle because I’d like my fingers to be usable after spraying it.

[@fluffy10mmjeepguy92]

Im glad you took the advice from us. I used spray glue to glue mine together. I have used plastic dip and flex seal. I got some flex seal that comes in a little paint can( like house paint)and brush down in to the cut outs. Yours look good 👍

[@RandoWayne]

Thanks so much for watching and the input!

[@bigmooi]

Keep silica packs throughout the layers to remove trapped moisture in the case. The valve works both ways it keeps both moisture out and in at the same time. Just an idea.

[@RandoWayne]

It’s a good idea, I appreciate your feedback.

[@ttss5726]

the valve is does not have anything to do with moisture its a pressure valve

[@archangel20031]

Just get that spray contact glue ready, wrap the gun in a garbage bag to make sure the glue does not touch it, then wrap the gun/garbage bag in a thick flannel bed sheet, then spray the glue, then press the wrapped gun into the case where you picked out the foam and the foam should stay in place as it now has a flannel liner between the gun and the foam keeping the foam perfectly in place. If you can find it, a nice felt liner would be even better!

[@RandoWayne]

Interesting tip! Thank you

[@joelstevensz06]

Thank you for the video following along would you please follow up, after multiple rain strips to see how the Plasti dip holds up?

[@RandoWayne]

Thanks for watching, I definitely will update! Take care

[@thomascrompton7775]

I used one entire can on just the top of both layers. Also getting between the cut outs. I bet I got about 6 thin coats out of can. I'm happy how it turned out.

[@RandoWayne]

Nice! Sounds solid

[@WoodshavenPatriot]

Did a similar project a number of years ago using a pelican case. While the foam is denser than the HF cases, i also used plastic dip spray to seal and close the precut gaps. These case setups do look pretty professional and make a nice range kit.

[@RandoWayne]

Thanks for watching and sharing. For the range this definitely works well. Take care

[@sanchesandsaucey2185]

Can't wait to see the full size case! Love seeing all the PSA's lol

[@RandoWayne]

Yeah I’m still deciding what to put in there, but once I do I’ll update. I like some psa products!

[@IOSALive]

Rando Wayne, You're so talented! I had to hit the like button!

[@RandoWayne]

Thank you

[@thomascrompton7775]

Crazy see the cut out foam is selling for more than the case

[@RandoWayne]

I know! It’s seriously crazy

[@Chuck1284-]

Good idea with the plastic spray stuff to seal the foam. Great video man, thanks!

[@RandoWayne]

Thanks for the feedback and for watching. Take care!

[@IOSALive]

Rando Wayne, I really enjoyed watching this, so I hit the like button!

[@RandoWayne]

I appreciate it! Take care

[@jtpiercy1966]

I do this to all my foam great video

[@RandoWayne]

Thanks for watching and I appreciate your feedback. Take care

[@brianhilligoss]

Foam is not abrasive. When buffing a car the compound you use is the abrasive. Foam traps dirt and sand that then can cause abrasions.

[@RandoWayne]

Not gonna argue with you, foam can be an abrasive though.

[@kelanweems8976]

I did the same thing with the apache 3800. Works awesomely .

[@RandoWayne]

That’s awesome, thanks for sharing

[@ms.annthrope415]

Good idea. Nust bought a 3800 from HF. Now deciding which pistol to put in and what configuration.

[@RandoWayne]

It’s like adult arts and crafts. Just have fun with it! Take care

[@stephenmitchell3569]

Great job and shared upgrade that is an excellent special case for use to carry multiple selections of handguns with possible accessories. I forgot the purchase when the sale was half price on this case. If you're ever in Georgia...North Atlanta and want to use my private range for fun or videos you're invited to.... Plus have use of Barrett 50 BMG to PMR30s. Everything free including ammo and instruction. Even 50 Beowulf ARs, to rare Colt SR Match Elite rifle...plus other tools, timers, lastest headphones, always free.

[@RandoWayne]

Thanks for the offer, I’m usually through Georgia at least once a year. I appreciate you watching and giving feedback!

[@timturner7609]

The correct way to use a hard rifle case is to throw the foam away and put a soft rifle case inside instead. This way you can leave the heavy hard case in your car or at your camp site and only carry the soft case with you to the range or whatever.

[@RandoWayne]

That’s a good idea!

[@carlosdaniels9515]

J ust caught them on sale again this weekend @ 45% off. 3800 series large case $39.99 was $21.99. 4800 series X-large case $59.99 was $32.99. Rifle case 9800 series $149.99 was $82.49

[@RandoWayne]

@@carlosdaniels9515 nice!

[@WesT9GTR]

I didn't realize how budget this case mod was until I saw him put all those PSA pistols inside. This a budget budget case mod 😂😂

[@RandoWayne]

I mean , I’m all about value here.

[@regality78]

Truck guns lol

[@andrewdo9722]

Closed cell foam is ideal, otherwise, it will soak up the oils.

[@RandoWayne]

Foam can both harm and be beneficial, just need to figure out what works best for you

[@alexpocs8649]

Closed cell foam is the best, apache cases are excellent buys.

[@rd0303.]

@@alexpocs8649what do you mean by closed cell foam?

[@STB-jh7od]

I'm sad I missed the 50% off sale for these last week :( But I had same idea about using different color plasti-dipp for the foam.

[@RandoWayne]

I’m sure they will be on sale again sometime, they usually do runs specials or at least like 10-20% off. Take care

[@AR_ZACK91]

They got a 20% off till tomorrow.

[@macalcord]

Didn't know that other stuff existed was about to buy some Flexiseal...Just saved me some money.

[@RandoWayne]

Thanks for watching, glad I could help!

[@fernando3482]

Great idea. How many layers of plastic dip ?

[@RandoWayne]

@@fernando3482 around 4 should work

[@olsonspeed]

I think roll-on bed liner might be a better option, more durable than the spray plastic.

[@RandoWayne]

@@olsonspeed definitely made stronger but I wonder how abrasive it is?

[@olsonspeed]

@RandoWayne I believe about the same as Plastidip . There are several types, some with grit and others that are smooth. Possibly the best solution would be Dragon Skin by Smooth-On. A cheaper solution might be Through-The-Roof sealant.

[@RandoWayne]

@ ok I wasn’t sure, well I. The future if I do another I can definitely give it a shot. Thanks for watching and commenting. Take care

[@otrshark]

Nice. Brilliant idea.

[@RandoWayne]

@@otrshark thanks

[@1924ab]

Great video, could you tell me what kind of hedge you have off to your left? Looks like it would make a great barrier.

[@RandoWayne]

Thanks for watching, they are actually American holly that have grown close together and we trim them up. But definitely are a great property divider.

[@1924ab]

Thanks! Have a dickhead neighbor and I don’t like fences.

[@RandoWayne]

Time to start planting then!

[@TuckerDale89]

I did this a few months ago and the plasti-dip didn’t work as well as I thought it would but it is better than not using it at all but it may take more than one can to achieve a better result

[@RandoWayne]

Thanks for sharing! I’m pleased with the results thus far, that being said if I notice any changes I can always add layers .

[@gabrielpark8910]

i will try this with flex seal spray too i wonder if it might be more durable, i worry about plasti dip flaking off after some time like how it does on cars

[@RandoWayne]

It’s worth a shot! I may try flex seal with my 9800. For science of course.

[@artinist]

How would Flex Seal spray do in this application?

[@RandoWayne]

@@artinist I used it for the rifle case I did and I feel it did provide a good job. It seemed to have better coverage with fewer layers. It has not separated or caused issues yet and the feel is similar in the rubbery texture.

[@adambates4785]

Safe to say the rifle is a psa?

[@RandoWayne]

The rifle I have in the rifle case is actually ruger American gen 2

[@zfgnerdlife]

Do you think using the brush on version would work better? Or even actually dipping it as intended?

[@RandoWayne]

The spray worked adequately but requires multiple layers. If using the brush on could probably avoid the need for layers due to you applying the desired thickness. In my next video I’m doing the larger case and I’m also going to g a different route with coating using flex seal. Thanks for watching!

[@zfgnerdlife]

@@RandoWayne I eagerly await the result!

[@RandoWayne]

@@zfgnerdlife it’s uploaded now

[@zfgnerdlife]

@@RandoWayne oooOOoOooOooO, my own personal notification. What a gentleman.

[@DesertTactical]

Pretty darn cool, man.

[@RandoWayne]

Thanks bro! Did you get one yet?

[@dustinmatthews387]

The problem with cheaper gun cases, is the light weight overtly soft foam that comes with them. I've gotten a cheap case from my LGS with that same large square foam and within a short amount of time, my handguns tore it up to the point where I had to try and reinforce everything with gorilla tape. Now I just get pelican cases.

[@RandoWayne]

That’s fair, I know they sell replacement foam on Amazon but I’ll see how long this lasts

[@scottmiller4516]

I did this exact thing about two years ago. Looks great but will still tear in chunks if your not careful.

[@RandoWayne]

Thank you for the advice and showing how these can last! Take care

[@jamesdiehl9251]

If you can look in your local area for a supplier that supplies foam for furniture repair, I found a local supplier that can cut any size any thickness I want price is very reasonable, and the quality of their phone is better than the plug style

[@TattoosAndGin]

Thanks for the vid. Looks nice

[@RandoWayne]

That’s for watching and for commenting, take care

[@Jason6.7]

Great video thanks for doing it first so I didn’t have to guess

[@RandoWayne]

No problem and thanks. Take care

[@ksboi29]

That is a great idea 💡

[@RandoWayne]

Thanks, I can’t take the credit as viewers suggested it but I’m glad I did it. Thanks for watching and take care.

[@JeremyMcCreary-ib7wo]

Anyway you can get me the measurements for the one like you have in this video

[@nathanwhite5602]

Cool video

[@RandoWayne]

Thanks, take care

[@scarface13205]

Liked and subbed!

[@RandoWayne]

Thanks for watching, take care

[@Velly_drums]

I thought you were going to plastidip the box, the foam looks nicer in black!

[@RandoWayne]

I like the tan color, just wanted to hopefully help The foam last longer . The coating really does keep the pluck apart foam in place well and I think will help it last longer!

[@atatton9892]

Nice! I took inspiration and created a replica.

[@RandoWayne]

Awesome! I’m glad you did! Take care

[@craigr7151]

I found hot glue gun works best to goue the layers

[@RandoWayne]

@@craigr7151 thanks for the info, take care

[@ianb8060]

Does any of the plasti dip rub off onto the guns when you remove them and place them back repeatedly?

[@RandoWayne]

I have no current issue with that right now. Comes out clean and the dip isn’t sticky feeling or tacky

[@megaman4201]

From someone with over 35 years automotive refinishing experience I don't like the idea of spraying something over the foam, eventually it could flake off making a mess every time you pull a gun out, I don't really think it's functional... I feel it has a greater chance of doing harm to your weapons than good. TC in Annapolis MD

[@RandoWayne]

I mean time will tell? Foam itself is an abrasive agent with or without any coating on it so theoretically could cause harm either way for transportation purposes Im excepting of this. If I notice anything breaking down or flaking I will replace the foam , although I hope it holds up for a long while. Thanks for sharing your thoughts though and take care.

[@megaman4201]

@@RandoWayne good, hope it works out well for you, new sub.

[@RandoWayne]

Thank you

[@stellacatfish]

If you invested in a great weapon. Invest in a case that respects your investment. Not something you've gotta McGuyver that wont last.

[@RandoWayne]

Making something your own is part of the journey. I respect my investment so I made the case suit my needs. Thanks for watching

[@Toms2ATime]

Good stuff!

[@RandoWayne]

Thank you! Take care

[@invictusbp1prop143]

“There goes all your firearms”…? If you can fit all your firearms in that case, you have some work to do.

[@RandoWayne]

Obviously they all can’t fit in there. But there’s always work to do

[@mlawson41102]

That plasti dip is DEFINITELY going to start to flake off on everything you put in that case within a year.

[@RandoWayne]

@@mlawson41102 we shall see, nothing thus far though. That’s we anything we do is a test.