Buffy's Back Part Nine

[@randrew89681]

Welcome back Keith. We all missed you friend.

[@terrylarotonda784]

Sure glad you are back on KZbin. Missed seeing you.

[@TrPrecisionMachining]

Very good job mr fenner..thanks for your time

[@bcbloc02]

Buffy is looking pretty!

[@tobyw9573]

So glad to see someone lube parts before reassembly. Thanks, Keith!

[@captainhgreen]

Getting closer for Buffy to make chips fly. Thank Keith for the assembly tour.

[@Daniel_cheems]

This has got to be the best Bridgeport milling machine in the world when it's restored!

[@KeithFenner]

Well I doubt that, at least it's a clean unit but not 100% rebuild. Thank you for the comment though.

[@xmachine7003]

@@KeithFenner Yes,let's slip the Spindle to Buffy!!😂😉

[@tombellus8986]

Good job Keith

[@danmooney7192]

The Title says "Buffy's Back Part 9" and the opening scene is you and a snow plow blade. and the thought went thru my mind of a Bridgeport with a snow blower attachment. I almost fell out of my chair!

[@donaldnaymon3270]

Nice work Keith. Almost finished. Looks amazing. Thank you for sharing.

[@bostedtap8399]

Excellent insight into the bridgeport. Thanks for sharing.

[@jimpritz4169]

It amazes me how you remember where every little widget and thing-a-ma-jig goes on Buffy. You must either have a photographic memory or you've done this many times before.

[@PeregrineBF]

Or he's checking the service manual as he goes.

[@KeithFenner]

I skimmed the manual when I took it apart, but I have been repairing machinery since 1975 when starting in the ship yards, so most machinery in this Era I had one part of it or another that needed some kind of attention during my career.

[@tobyw9573]

@@PeregrineBF Or perhaps Keith has photographic photographs (videos) , LOL :) I'll go with either choice.

[@kevincosgrove4147]

I’m so glad too see you making videos and Keith I’m always excited to see your work amazing craftsmanship in everything you do

[@CraigLYoung]

Thanks for sharing 👍

[@kentuckytrapper780]

Gettin it done, great job Keith, keep'um coming..

[@catfishgray3696]

GREAT VIDEO, KIETH...

[@HUBBABUBBADOOPYDOOP]

Merry Christmas and Happy New Year to you, Keith!

[@TitusKrakenDesigns]

Haha, boy butter:D give us more slang! Nice video again!

[@Daniel_cheems]

Keith is back baby!

[@karolszuba7603]

Miło znowu cie widzieć Kieth

[@SquidoftheD]

Mate the ways on that machine look very very good Kieth, I can see why you acquired it, anyone would be made to pass on it

[@countryracer69]

Just realized im gonna need those plastic bushings. Great. Add to the list! My belt was gone and watching I thought I needed to do the all thread deal to get my belt back on. Now I know why belt was toast

[@stumccabe]

Thanks Keith.

[@acme4786]

Wish I still had a 1970's tool. Wait, just found a Cheech and Chong assortment set on Amazon. ;)

[@mikeeiben3430]

Went through a shop in West Virginia looking to buy machinery. They had several Bridgeport mills with shaper attachments on them. Now I know what the hole on the back side of the ram is for.

[@ÁREAJ27]

Olá meu amigo Keith!!! Muito bom trabalho, aguardo a continuação deste trabalho e outros!!! Lhe desejo saúde e cada vez mais sucesso!!! Abraço

[@KeithFenner]

Thank You Merry Christmas!

[@ÁREAJ27]

@@KeithFenner Eu que agradeço meu amigo, obrigado e também lhe desejo um Feliz Natal com muita saúde e paz!!! Abraço

[@xmachine7003]

Yes,let's slip Buffy the Spindle😉😂

[@wilsonlaidlaw]

Keith, would the lovely aluminium top housing for the Bridgeport, have been sand cast and hand finished or diecast and just polished?

[@KeithFenner]

I polished it , in the beginning of the series, buffy get a new spindle 2017

[@garybrenner6236]

Two "button head" screws would be good for that scale.

[@jrb_sland5066]

26:30 Look under the potato, Keith ! Very, very old joke : Waiter asks " How did you find your steak, sir? " Customer replies " I looked under the potato !". hehehe

[@tmurray1972]

Hey Keith, enjoying the rebuild. The paint? It’s Rustoleum enamel, smoke grey, is this correct? With Japan dryer added? Was wondering how chip resistant this is, and if it’s hard enough? Thanks.👏🏻👏🏻

[@KeithFenner]

It does well and easy to touch up if you want too.

[@tmurray1972]

@@KeithFenner Thanks, I might give it a try on an old walker turner drill press.👍🏻

[@acoow]

Buffy's Back Nine? I didn't even know she played golf.

[@robrobinson6706]

Is it intentional that the spindle lock lever is on the back side?

[@KeithFenner]

Yes, reasoned in part 8

[@robrobinson6706]

@@KeithFenner I suspected. Busted You caught me skipping ahead. Thanks for all you do Kieth. Take care.

[@W4BIN]

I mix my epoxy on an index card with a used pop cycle stick when I am done I fold the card in half with the pop cycle stick in the center and I put them in the garbage. Ron W4BIN

[@tmptorneria1818]

hola keiht hermosa esta quedando yo tengo que cambiarle los buje tengo que averiguar cuanto cuestan en ebay no se si se envían a argentina bueno espero el otro video saludos amigo

[@harles5000]

Keith where are you located?

[@randallparker8477]

You said "boy butter" ... I thought you said "boi butta"... LOL

[@jj1479]

What happened to part 6?

[@Bobs-Wrigles5555]

You'll have to look at rumble to see it, link is in the description for the preview of part 6 in Keith's video listings.

[@Blue.4D2]

⭐🙂👍

[@davidhamilton7628]

🇺🇲👍

[@jmew1922]

I like the name of the other channel even more so than my name is jerry mew and ive been called mewe at times usually just before they get a sore nose

[@KeithFenner]

LOL, must be the wine in the voice!

[@mickynixon4814]

First :)

[@mickynixon4814]

lol from UK

[@TSKseattle]

Keith, I started following you because of the cool projects you got from customers and your talented solutions. Now, it's just "buffy" videos, and "I'm not filming it" jobs. I'm not a machinist, I'm never gonna rebuild a Bridgeport. Please get back to customer content, on any platform.

[@KeithFenner]

I will when buffy's done.

[@chriscraven9572]

What is it the kid says just after the pledge (just before the girl says Amen)

[@KeithFenner]

Peace out!

[@chriscraven9572]

@@KeithFenner Thanks Keith.

[@yambo59]

Damn video wont hardly even play and stalls with error at 360 res. on my six core 32G computer with fiber optic speed test showing 52 MBPS - YOU TUBE you SUCK-!!!

[@KeithFenner]

Try it on my Rumble site, set the res, for 1080 before watching. rumble.com/vqrb44-buffys-back-part-nine.html?mref=enuw3&mc=c4fof

[@kenburner]

“ Wikipedia: “MeWe is an American social media and social networking service owned by Sgrouples, a company based in Culver City, California. MeWe's light approach to content moderation has made it popular among American conservatives, conspiracy theorists, and anti-vaxxers.” Wow.

[@KeithFenner]

And the cofounders of Wikipedia, Jimmy Wales, Larry Sanger are liberalist, what else would you expect for an outlook from them, defiantly judgmentalist. LOL

[@simperous4308]

@Stanky Piece of Bluecheese plenty of nasty left wing spew on KZbin…

[@countryracer69]

Just realized im gonna need those plastic bushings. Great. Add to the list! My belt was gone and watching I thought I needed to do the all thread deal to get my belt back on. Now I know why belt was toast