Build a Cheese Board | Cheese Slicer | DIY Cheese Slicer Board | Scrap Wood Project

[@DanPrudlow]

Want to support the channel? Here's what you can do: - Subscribe to the channel - Hit that Like button - Leave a comment - Amazon Affiliate: amzn.to/2LaN1Ib In this video I build a couple of cheese slicer boards from various scraps I had laying around from other projects. I threw in a few pieces of purple heart, yellow heart, and padauk that I picked up a couple years ago at a woodworking show. I've put a few links below to help you build your own or just buy one already made! Let me know what you think in the comments section below. Slicer Kit: amzn.to/3fFiEt4 8 inch drill bit: amzn.to/3dD9StM Cutting Board Feet: amzn.to/2yR1xnA Pre-build slicer boards: amzn.to/3fLOnIW Tried & True Original Wood Finish: amzn.to/2Z87HKQ SawStop 1.75hp PCS: amzn.to/2X4gWsP Ridge Carbide 10-inch Saw blade: amzn.to/3bATmcp Bosch 18v Impact Driver: amzn.to/3cxAhJk Ridgid ROS: amzn.to/364yHMA Titebond Wood Glue: amzn.to/2LzTdv4 Bessy Parallel Clamps: amzn.to/2z4LHG3 Thanks for watching. If you have any comments or questions please leave them below or hit me up on social media, email, or my website. Hit that like button and don't forget to subscribe! Thanks! Subscribe: kzbin.info Twitter: twitter.com/DanPrudlow Instagram: instagram.com/danprudlow

[@stevei7646]

Thanks Dan, enjoyed the video. Nice project. - Steve

[@DanPrudlow]

Thanks for taking time to watch and comment. Your support is appreciated! 👍🏻

[@YOBISTUFF]

I want that 😁

[@DanPrudlow]

Glad you like it. Thanks for watching! 👍🏻

[@unitwoodworking5403]

I love the color, pattern and design of this board. It is beautiful and nice. Thanks for a nice and interesting video.

[@DanPrudlow]

Glad you like it and thanks for the compliments. Thanks for watching! 👍🏻

[@unitwoodworking5403]

@@DanPrudlow You're welcome. Take care.

[@howardbessen4246]

Did I miss something or is there no discussion of dimensions, where exactly to drill the hole, etc?

[@paulbeaver2918]

A little narration would be great. And the product you used for the finish?

[@DanPrudlow]

The finish is Tried & True Original. Thanks for watching. 👍🏻

[@bradmcnamar5679]

I just built one of these and am having an issue with it. The wire does not align properly. The bottom moves to the left too far. I can move the top bar to the right to compensate and get the proper alignment, but it moves right out of alignment again. Do you have ano advice on how to fix that?

[@DanPrudlow]

I had to sort of bend the bar thing a little to get it aligned. Mine the end near the handle was over to the right because the bar was pulling that direction. Putting a hole in a scrap and I using it to torque on the par a little ended up working pretty well.

[@stevenbond6576]

AND WHERE DO YOU BUY THE SLICER KIT?

[@DanPrudlow]

Amazon of course! 🙂. There is a link in the video description that will take you right to it. Thanks for watching!

[@johnwatts4472]

It would have been a good video from a camera clarity and editing aspect. However the 100% blaring rock background music and lack of any viable educational dialog is a great reason NOT TO WATCH THIS FLIC. it was of no educationally value to any one attempting to make a cheese board slicer kit. A waste of time. Sorry for the negative comments, but I hope your next video will understand these comments and avoid such production issues. Try again, better luck next time..

[@DanPrudlow]

Ok.