Build an Infinity Mirror | Science Project

This video provides an overview of the materials and process to build an infinity mirror, a trick mirror that creates the illusion of an infinitely deep tunnel using LEDs. You can build one using simple materials available at a hardware or arts and crafts store: a small cardboard box, a tiny craft mirror, some plexiglass, reflective window film, and LEDs. To view full directions for this science project, see the "Explore Optical Illusions: Build an Infinity Mirror" Project Idea at Science Buddies. www.sciencebuddies.org/science...
Science Buddies also hosts a library of over 1,200 other free science fair "Project Ideas" for K-12 students, in a wide variety of topic areas from Astronomy to Zoology! Visit us at www.sciencebuddies.org?from=KZbin to see more Project Ideas for hands-on science and engineering.

[@suicat]

I have a question. I'm not sure if you're able to answer it or not but, if you were to etch a design in one or the other mirrors, would it also have the same effect, or does it have to be glowing?

[@antonyza]

Es muy interesante cuando una persona tiene la capacidad para explicar de manera correcta como hacer un proyecto,lo felicito por la sencillez y lo eficiente que lo ha hecho,gracias. It's very interesting when a person has the ability to explain corect way to do a project, I congratulate the simplicity and how efficient it has, thanks.

[@georgehwbush9866]

Hey ScienceBuddiesTV could you tell how much all the materials are?

[@surajtirupati5237]

Can this be done using two acrylic mirrors instead of using one acrylic mirror wrapped in film and a traditional one? I ask because I can't find an appropriate sized mirror for the photo frame I'm using. Most mirrors I have are too big and because they are traditional glass, I don't have an effective means of cutting them to the right size - where as I could easily do this with acrylic mirrors. Thanks

[@brenrave666]

Suraj Tirupati Technically yes it can be done with 2 acrylic sheets wrapped in reflective film just make sure the reflective sides are facing each other with your led's in between.. in fact it gives a pretty cool effect cuz then u get a Illusion mirror on both sides of your frame :D If your making a small one just stick the battery pack to the side of the frame.. if ur making a big one do the same with the cable n bring it out from the side of the frame. ;) lemme know if it helped

[@amaldivakaran2335]

how do u assembled tat and connected to the battery?

[@tomasinagmailcom]

round tunnel is a cool!

[@davedembinski7712]

What if I have a coffee table and glass top? Would I put the plexiglass and film underneath the glass top or can I use the film on the glass and not need the plexiglass?

[@ElectricExperimentsRobert33]

The plexiglass can be replaced with glass? :)

[@user-sb7tu2ve8h]

+Electric Experiments Roobert33 it can

[@mariosnoop8197]

Nice

[@Eclipse2104]

what film did you use for the plexiglass?

[@Amperzand]

it's just "reflective film" available in any color on Amazon or Ebay on a roll or different sizes.

[@Eclipse2104]

Amperzand nvm i got some and made it.

[@salvatorelimpido911]

nice

[@lightningstorm2249]

2:00

[@orokinderelict2502]

How thic is the plexi glass?

[@Science.Buddies]

Hi Orokin - the plexi glass is 1/8" thick, but the thickness isn't critical.

[@strangemansgamezone174]

I have a question I would like anyone to answer can I use normal glass instead of plexiglass if not then what should I do if I can't find it

[@Science.Buddies]

You can use normal glass, we just listed plexiglass since it's easier to cut.

[@GoogleUser-bl4mw]

Hmmm!

[@torjusbye]

Dot orgy.

[@RBRM3]

Looks better with normal window tint

[@sandeshbalekarofficial3113]

used glass paper name is

[@joshuaanderson2185]

Probably married.

[@jessedover6175]

Seizure Time !!!!!😬😳😵🥴

[@11el1]

This may be a stupid question, but I've never tried this before so I'm wondering if you can use the mirrored (chrome) spray paint on the plexiglass instead of the mirrored window tint?

[@egyptforall6062]

nice

[@TheGeekRex]

0:20 StarGate Active.

[@rknaaru]

thank u for providing the tutorial so clearly.

[@rachellopez6437]

Can the mirrored window tint be replaced with mirrored paint? I have a couple days to do this and it would help please.

[@brendakarkos7740]

i am trying to make one that has both sides exposed inset a partition wall the effect i am hoping for is to see through and still keep the infinity look i havent completed it yet but i am using a two way mirror in the middle and both outer sides a filmed plexi with 2 led strips on either side what i believe i am seeing with these videos is the closer the mirrors are together the more infinity effect is that correct? any input on what i should be doing to get the look im wanting? getting frusterated haha

[@atomskabubasvaba]

What is reflective factor for window tint film You used here??? There is several diferent factors... From 50% to 100%... Which one did You use here?

[@tvd-theremedy2515]

Bojan Simonovic You can use regular dark tint (that has the percentage of light that's allowed through listed-- the type that you can put on car windows), but it seems to work best if you use actual "mirror" tint. I haven't seen mirror tint with a percentage listed listed on it like that. Are you using dark tint or mirror tint? The kind I've used, that works pretty well, is called Gila Mirror Privacy Control Window Film. There's no percentage rating for it or anything. For this brand at least, if it's "mirror" tint, it's all the same. I'm not sure if there are other brands that have different strengths of mirror tint, and which would be best if there are-- but I do know that kind I listed above works (and it looks the same as what he used in this video).

[@atomskabubasvaba]

Tnx

[@_midnightrunner]

Led light strips are available, fully assembled at Autozone® for about $15 - $30 and include the battery pack.

[@shaiyacoprez2812]

They're available on eBay for $7

[@allisonpellinen404]

Wreak it Ralf : DONT GO TO EBAY

[@benlawrence5313]

anyone here not know that two mirrors can reflect infinitely??

[@HypnoticHollywood]

+Ben Lawrence I think it's basic common sense.

[@Neuwey331]

But for some reason, it gets darker the deeper it is.

[@linaxflagx1443]

​​@@Neuwey331eflected light gets dimmer as it gets reflected over and over again, hence creating the hole effect The most basic way I can explain it unfortunately

[@sanjushadevi1870]

Ya

[@kodirichards6395]

Where can i buy the same mirror at the start of the vid

[@Science.Buddies]

That mirror was built, not purchased - you can find instructions here: www.sciencebuddies.org/science-fair-projects/project-ideas/CompSci_p050/computer-science/color-changing-infinity-mirror-arduino?from=KZbin

[@mauriidadonn]

This is a cool project-Bendy The Ink Machine

[@RBRM3]

You didn't use soapy water did you... It was just dry and wasn't heated up enough. Just a couple things to look at in the future. 👍

[@brandonhowarth2402]

good idea project film on mirror and make it into a cube so it reflects 360 degrees as a movie-

[@wanmuhdhafiz]

good i wan to make for my shop

[@alecneal5533]

an you make it in mirrors on both sides?

[@alecneal5533]

I meant "can" and "infinite"

[@tvd-theremedy2515]

Alec Neal Yeah, you basically need 2 mirrors facing each other, with a strip of lights in between. Since you can't see through regular mirrors (unless you use a 2-way mirror), you have to use regular glass with mirror tint on one side, instead of a mirror (ultimately the front side, once it's put together), so you can see through it.

[@mariosnoop8197]

Hello can u please show me how to make a infinity mirror cube

[@jimmmy136]

Is it raining in the background?

[@colonexkernex487]

Woah if i created that, my brother will say Ohhh a Portal How did you do that

[@RBRM3]

You would need 2 of them

[@hannybananie]

It only explains the material. I cam ehere for a tutorial on how to make it.

[@Science.Buddies]

Written instructions are available on the Science Buddies website: www.sciencebuddies.org/science-fair-projects/project-ideas/Elec_p080/electricity-electronics/build-an-infinity-mirror?from=KZbin www.sciencebuddies.org/science-fair-projects/project-ideas/CompSci_p050/computer-science/color-changing-infinity-mirror-arduino?from=KZbin

[@amaggard14]

Are most of your viewers children or something? "Get an adult to help you"

[@ThatBiohazardGuy]

+Brian P Kuhn Science buddies... come on mate.

[@highrise9559]

I'm over 50 and when it comes to scoring and cutting Plexiglass, I would prefer any "adult" besides myself to do it. Total pain in the a$$ to make it perfect.

[@7starLEDTelugu]

Muneer

[@minhthuyet8088]

Thằng tây. Làm hay đấy.ha ha