Build and Weather a Model Railroad Bridge

In this video I show you how to build and weather a model railroad bridge using Micro Engineering Deck Girder Bridge. This 80' open deck bridge came out beautifully. Let me show you how I did it.
✅ Want to get more RTNT? Consider becoming a channel member. Click the “Join” button or use this link to learn more: / @ronstrainsnthings
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
✅ RTNT Amazon Page: www.amazon.com...
✅ Amazon Pick of the Week: amzn.to/2SIMUs9
(NOTE: The above are Amazon affiliate links: I make a small commission from any purchased made through these links.)
✅ Save 10% on all regularly priced items from Micro-Mark: The Small Tool Specialists. Use promo code RTRAINS upon checkout. www.micromark....
(NOTE: The above link is an affiliate link. I receive a commission from all purchases made through this link. Exclusions: This offer cannot be combined with any other offers, not applicable to Pre-Orders, Digitrax, SoundTraxx, or 3D items, applicable to merchandise price only, shipping and handling fees not included, gift cards, or eGift certificates.)
✅ Find fantastic foam cutting tools and adhesives from Hot Wire Foam Factory at: hotwirefoamfac...
(NOTE: The above link is an affiliate link. I make a small commission from any purchases made through this link.)
✅ Get RTNT merch--branded products, fun T-shirts, and more--at my Spreadshop store: ronstrainsnthi...
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
✅Take advantage of the rewards for your support of Ron's Trains N Things through Patreon:
/ ronstrainnthings
✅ You can also invest in this channel through PayPal:
www.paypal.me/...
Your support is greatly appreciated. Thank You.
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
🔸 Contact me via email: [e-mail]
🔸 Join the Ron's Railfans community on Facebook: / ronsrailfans
🔸 Connect on Instagram: / rtrains
🔸 For more about my layout, the Texas Colorado & Western Railway, check out / tcwry
If you like what you see give it a "like" 👍, subscribe 🔔, comment 💬 below, and share it on your social media and model railroad forums.
🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽🔽
Credits:
🤘 Theme Song: "Extremes" by the Lemming Shepherds
Exzel Music Publishing (freemusicpublicdomain.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
🎵 CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
👂 Sound E ffects: LoudTVStatice.wav from Freesound.org by 18hiltc / @rc_swift1772
Licensed under Creative Commons Attribution 3.0
creativecommons...
TVStaticSound by KLEBER KGF from Freesound.org
Public Domain
Equipment:
🔷 Canon Rebel T6i DSLR--amzn.to/2EEGYeO
🔷 Canon Rebel T3 DSLR--amzn.to/2Cmm8xt
🔷 MX-2000 tripod
🔷 Logitech C922x Pro Stream Webcam--amzn.to/2CaBzfd
🔷 Excelvan 2kW Lighting Kit--amzn.to/2EcHZrH
🔷 Blue Snowball Ice Microphone--amzn.to/2Cb1raG
🔷 HitFilm 4 Express--hitfilm.com/ex...
🔷 Audacity--www.audacitytea...
🔷 Clamp Lamps
🔷 The Sun--en.wikipedia.o...

[@RonsTrainsNThings]

Interested in bridge models? See how I build, weathered, and incorporated a highway bridge here: kzbin.info/www/bejne/a5CteamsfL90pbs

[@RodDiery]

Good to see you back Ron.

[@RonsTrainsNThings]

Thanks.

[@peteedwards7157]

That’s a really nice job. Just shows how a fairly basic kit can be made to look really great.

[@brucegiroux]

Nice looking bridge. Welcome back.

[@RonsTrainsNThings]

Thanks, Bruce. Good to be back.

[@DavidSmith-ub7zz]

glad you our back

[@RonsTrainsNThings]

Thanks.

[@chazco]

It is great to have you back. You were missed. The bridge looks great

[@RonsTrainsNThings]

Thanks.

[@n-scaleunionpacificevansto6569]

"Real life" keeps getting in the way of our model railroading, Ron. Glad you're back. ...Roy

[@RonsTrainsNThings]

Hi, Roy. Yes, it's been a busy and in some ways hard 4 months. It's good to be back.

[@ainsleyperry5192]

Ron, Nice to have you back. A lot of work for a small bridge but well worth it. Cheers, Chris Perry.

[@RonsTrainsNThings]

Thanks.

[@charlesgardiner6023]

Great Channel Ron thank you

[@RonsTrainsNThings]

Thank you for your comment and thanks for watching.

[@amywhite9386]

Great video, thanks for the tips.

[@ciredfish]

Great to have you back Ron! The bridge looks great!

[@RonsTrainsNThings]

Thanks.

[@Death_From_Below]

Fantastic video, thanks.

[@brenmayhugh]

Ron has returned - yay!

[@jerrysmith1929]

Good to see you back in production.

[@RonsTrainsNThings]

Thanks, Jerry. Its good to be back.

[@ItsMyRailroad]

Looks great Ron! Nice job buddy!

[@RonsTrainsNThings]

Thank you my friend.

[@normanrowe2831]

Very nice. I enjoyed you showing the repair of the broken piece. The end results are very good. Thanks.

[@RonsTrainsNThings]

Thanks.

[@Rhinexing]

What a pleasant surprise to find a new Ron's Trains N Things video in my feed this morning! Welcome back!

[@RonsTrainsNThings]

Thanks.

[@RailserveJohn]

Enjoyed the video Ron. Glad to see you're back. Hope all is well with your family.

[@RonsTrainsNThings]

Thanks.

[@jolliemark6294]

Ron like how ot turned out, but use a little baking soda and super glue to mend parts you will be surprised at how strong it is, I repaired my grand son's glasses and it worked great, we were going on vacation and didn't have time to get new ones so as a quickie repair it really work out great....thanks for sharing....Jack

[@RonsTrainsNThings]

Hi, Jack. I've used that trick but didn't think of it here. Thanks for the tip.

[@nateshon3eastbroadtoprailr448]

Glad to see you're back!

[@RonsTrainsNThings]

Thanks.

[@IMRROcom]

Holy Blocks in play, Real Modeling has begun

[@RonsTrainsNThings]

I thought of you when I pulled it out. Knew it would.make the video for you.

[@IMRROcom]

@@RonsTrainsNThings Holy Steel Brick BATMAN that had some weight to it, I'm serious that is nothing to bridge over.

[@JoeG-firehousewhiskey]

You did a great job building that bridge, I really like the weathering

[@RonsTrainsNThings]

Thanks, Joe.

[@jimsmoter4510]

Welcome back Ron, great job on the bridge..

[@RonsTrainsNThings]

Thanks.

[@Perfusionist01]

First, I am glad to see you back in action. I hope that your life is better/calmer now. Second, I really liked your bridge project. We have a similar approach but use different materials. It just helps to have looked at a few real bridges and to realize that a "black" bridge is rarely BLACK - it is a multicolor of rust, dirt, worn wood, etc. Nice results on your project. I'm looking forward to seeing what you do with the abutments.

[@RonsTrainsNThings]

Hi, Gary. I'm still playing with the abutments, but I think that should be an interesting project.

[@waltersobchek2465]

Ron's back! Great bridge tutorial looks nice! thanks👍👍

[@derek7837]

Great to have you back Ron!!! I have surely missed your videos.

[@RonsTrainsNThings]

Thnks. Its good to be back.

[@jeffmorgan1229]

Hi Ron, glad to have you back, another great video. I also enjoy the background music, for me it's very calming and I can focus on the contents of the video. It's great to get back to normal. Steam town was great but multiple weeks of it was getting to much. Don't get me wrong, I love trains. But it's nice to get back to videos like this one. As Steve Brown would say RAIL ON MY FRIEND. already looking forward to your next video.

[@RonsTrainsNThings]

Hi, Jeff, and thanks. Its good to be back.

[@attackeagle]

Welcome back Ron. Have missed your video presence. Congrats to you and your wife on the double graduations, and blessing to your ministry. Videos always seem to be timely (divine providence?) . Just got my Tomix trough bridge in the mail yesterday!

[@RonsTrainsNThings]

Thank you for your comment and thanks for watching.

[@robertterry9367]

I have been waiting for your next video. Thank you Ron.

[@WestCascadeRail]

A ron’s Trains n things video: the perfect way to start a morning.

[@williamdickman7917]

Welcome back, Ron...great video. One thing...the guard timbers also help hold the ties square and evenly spaced over time since there is no ballast to hold the ties in place. Hope to see more vids like this one.

[@RonsTrainsNThings]

Thank you for your comment and thanks for watching.

[@richardmattingly7000]

Nice use of painters tape as a rig for gluing two pieces back together, and I often use the leftover spru/runner for bracing both unseen inside corners/repairs. Another use for it is making lengths of pipe or other fittings and applying a little heat it bends nicely then you "freeze" the shape with a spritz of water. Weathering is one of though techniques where less is more because thinned paint or washes does more to bring out detail better than any brush and making rust right is an art unto itself.

[@flyboy2610]

Great to have you back, Ron! Life does have a way of going bonkers sometimes, doesn't it? Nice looking bridge!

[@RonsTrainsNThings]

Thanks.

[@CM-ARM]

It's really great to see you again Ron. FYI I have finally started my own layout and wouldn't you know that I am going to be putting a Girder bridge right now. Perfect timing. Yet again a great how to video. Thanks for the help

[@RonsTrainsNThings]

Thanks, Chris. Good luck on the new layout.

[@scottsilvey7522]

Nice job Ron! I have 3 of these in HO scale. I live on the old Big 4 Dow line and the bridge I want to replicate with those sections was built in 1918!!! The guard rails have been removed when Conrail installed welded rail. One detail on mine is the tie straps which is flat steel straps about 3 inches wide and about a 1/2 inch thick running along the outer edge of the ties and set in place with lag bolts. I bought some K&S brass sheet and cut 1/8 inch strips off and set thru a Cubs game and drilled holes into each strip which I will use nut, bolt washer castings to simulate lag bolts. After all of that tedious work I thought to myself I should have been building in N Scale!!!!!😁😁😁😁😁

[@donho4552]

Great to see you back. I always enjoy your videos even if the subject matter is about a technique I have used for years. You never know when you might learn a new trick. Keep up the good work.

[@RonsTrainsNThings]

Thanks.

[@JoshTrainsReyesBfmv]

Glad your back Ron! Can’t for more great videos. Bridge looks really good too!

[@RonsTrainsNThings]

Thanks.

[@erict.8190]

Nice video of the bridge building, welcome back Ron

[@RonsTrainsNThings]

Thanks.

[@drpeterpunch765]

Ron I think you do a fantastic job informing others about the hobby, and your own layout and skills are exemplary. I would like to make a couple of suggestions. One is that I’m hearing a low grade repetitious music which may be something to do with my computer, but if not I would like to respectfully suggest that it doesn’t add to your videos. Secondly if you are naming a specific product could I suggest you show the label on the product so that if we don’t catch the name then we can pause the video and write down the product name? Many thanks and keep up the great work.

[@uptownphotography]

Nice job. Must be really hard working with these small parts in N gauge. I model in HO and that seems hard even in that scale. Well done.

[@Mercatoyd]

Very Happy to see you back Ron. As usual, an excellent How I Do It video. Will you at some point apply a small piece of non conductive material to the ends of the guard rails..or just pliobond them to the ties beyond the bridge? Tom

[@RonsTrainsNThings]

Hi, Tom. I am thinking I will just Pliobond them down, but I have not decided for sure. Bringing then together with an insulator will require some filing that I'm not excited about.

[@ryangrider9607]

Nice job!

[@RonsTrainsNThings]

Thanks.

[@N-Scale]

Nice job on that ME kit , they are sometimes a bear to fit. Thanks for sharing. Mike

[@RonsTrainsNThings]

Yes, they can be. This is mybsecond one, so I had some.experience going in.

[@N-Scale]

@@RonsTrainsNThings They are just simply old molds and usually a lot of flash on them. Mike

[@RonsTrainsNThings]

Yes, and that was very true of this one.

[@plasticbutcher]

Hey Ron, great video and great to have you back. Rick B aka Plastic butcher

[@RonsTrainsNThings]

Thank you for your comment and thanks for watching.

[@christopherlong2301]

Great to see you back Ron. Was getting worried about you. Nice bridge build with some great tips. Looking forward to the next video.

[@canyonpast]

Great video thanks for sharing and showing.

[@lotsatrains]

Wow you did an excellent job on that I really like it thanks for showing how it’s done I would have made a mess or lost those little shoes lol.

[@RonsTrainsNThings]

Thanks for your comment. It isn't as hard as it looks with some practice.

[@sithlordofoz]

Hey welcome back!! The finished bridge looks great - really like the look of the rails.

[@RonsTrainsNThings]

Thanks, Kevin. Good to be back.

[@trainroomgary]

Hi Ron: The painters tip for the repair is helpful - Cool 😎 I like using that painters tape to pick up dust off my work area, no need to break out the shop vac. just use the sticky side of the tape to pick up dust, and put it into the trash. "Like" & Cheers from The Detroit & Mackinac Railway 🚂

[@RonsTrainsNThings]

Thank you for your comment, Gary, and thanks for watching.

[@mandbhomestead]

Ron, great video, that bridge looks perfect. I have learned a lot so far on your channel and continue to do so with this video, thanks for sharing it.

[@RonsTrainsNThings]

Thank you for your comment and thanks for watching.

[@davesartell5287]

Enjoyed girder bridge weathering . Sound was distorted just as you began applying material with the make up applicator. What did you apply and what is terpenoid? Thanks Ron.

[@billvassar7473]

thank you Ron, I have the same bridge in h.o. scale, have not built yet.

[@RonsTrainsNThings]

Good luck.

[@JCsRiptrack]

Welcome back Ron! Looks great, and the attention to detail. :) This kit seemed to have a lot of flash for a Micro Engineering piece, or is that more normal?

[@RonsTrainsNThings]

This one did seem to have more flash than normal.

[@JoseAntonio-xc3ju]

Lindo trabalho Parabéns!

[@michaelmcguire19]

Do you have any suggestions on the gauge of track I should use I was talking to a man at his Hobby shop and he asked me what gauge of rail I wanted to use on my HO scale layout

[@TheOriginalBadger]

Hey Ron...its been over 8 months since you did a layout tour and update. How about another one? Or even a cab ride? :)

[@gfandwrr1]

What is the glue you used with the microbrush?

[@RonsTrainsNThings]

That was a solvent cement--in my case MEK, but MicroMark Same Stuff or Plastruct cement or other similar ptoducts work just as well.

[@bulletsponge1656]

I want to buy this bridge real bad and i cant find it anywhere in stock its like all the good n scale bridges from many manufacturers are out of stock or someone is price gouging the one the only one they have in stock ...any ideas?

[@azaquarium123]

Thanks for the video! The packaged instructions aren't very clear at all.

[@markirvin2809]

Change that awful audio track, Ron. It is driving me nuts!

[@jerrysmith1929]

Yes, Ron, I also find that background sound track annoying like the drip, drip, drip of a leaking faucet. Seems more appropriate to a mystery show. Surprising, because your videos are superb.