Build Flywheel Spring Machine Make Electricity Free Energy Generator Perpetual Motion Yes or no

Build Flywheel Spring Machine Make Electricity Free Energy Generator Perpetual Motion Yes or no
Recently, there’s been a surge of videos about perpetual flywheels generating electrical energy, sparking a lot of debate and controversy. We’ve also been intrigued and somewhat puzzled by these claims. Today, we’ve meticulously examined every detail to find out if there’s any truth to the idea of a perpetual flywheel. Watch the video to discover what we found out!
#mrelectron #freeenergy #springmachine #freeenergygenerator #perpetualmotion

[@sergeiz2465]

Finally a video showing it doesn't work. Honesty is best.

[@HTN_creativity]

I still have no idea how they did it.

[@martinladipo2046]

​@@HTN_creativitythe angle at which your springs are positioned are not completely balanced around the rod so you have 180° angle yet to be engaged and as such wont complete the cycle

[@calangosabido2231]

Eles colocam um motor fingindo que é gerador e ligam energia nele escondido , sem o motor não funciona com certeza, honestidade e tudo.

[@nawaf757]

Thank you for proving this method false.

[@HTN_creativity]

since i did it i didn't think it could work forever

[@clarkwayne3440]

It is not a hoax. He just doesn't know how to use the special numbers or God numbers (ex. 3, 6, 9). And it's obvious you don't know also.

[@KMK2022]

The concept of spring generator is good, however there are some inherent flaws, these flaws can be resolved, need a trail and error to refine , as you have explained these are used in industries , there are some improvements required. 1. The Spring generator with 8 springs at 45 degrees each is a good design for running heavy alternators to produce energy, even the flywheel to be heavy and in equilibrium with the springs tension, need to take high quality springs, how this works is when it rotates an alternator it produces a desired energy, and from that same energy , we need to add a motor to rotate the flywheel whenever the flywheel reduces its required spin the motor will support the rotation , few electronics are also required to take into account like speed sensors and automatic switches when the speed reduces the motor will spin the flywheel to compensate the loss and when inertia acts and makes the flywheel to run at the desired speed the support motor will just rotate without power. means to make the spring generator successful we need additional inputs and use of electronics and some variable frequency drives... to help the world the get energy....

[@HTN_creativity]

oh your idea is very good, i tried it but it seems something is not quite right please take a look and give me your comments

[@HTN_creativity]

kzbin.info/www/bejne/hXPYY2aEmrt9apY

[@SumYungGuy-q1k]

I believe your flywheel is out of balance, causing drag?! Or maybe it's just bullshit altogether?! Either way thanks for putting in the work 😎

[@HTN_creativity]

I still can't believe it can move continuously without any force, I will clarify this because I am curious about this myself

[@M.Channel76]

Без пружин она крутится дольше😊

[@davidhuskey8414]

He has two opposing the other two, so it has equal retaining force 180 deg opposite each other. That will not work. They must be out at least 60 deg.

[@chriselliott368]

..... or 120 degrees and three spring points ....?

[@charveysr]

It won’t work with the springs placed 180 degrees from each other. That’s why when it stops it rocks back and forth. One revolution is 360 degrees. Divide that by the number of springs and place the springs at that degree location on the shaft. Just like the crankshaft of an engine. Would be interesting to see one built on the precise location and see what happens. If I had time I would build one to see what happens.

[@commentgagnerdelargentsuri310]

Your flywheel isn't perfectly centred

[@HTN_creativity]

is that right, i think i did it very well, do you see any errors so i can try to fix them

[@hasanchalabi]

😢😢😢😢😢😢😢

[@StingFlight]

Thank you for proving that the rather crude replica that YOU built does not work. Now, to prove that the concept itself is flawed, correct all the flaws in your machine, try again and give us the results. The flywheel must be round and balanced. The springs must be adjustable, properly tensioned and at the correct angles. The whole machine must be in balance and not flailing around, so it adopts a smooth, resonate balance. You can definitely achieve a longer run-time than you did with this version.

[@HTN_creativity]

Thanks for the advice, I will keep debugging to see where it goes

[@user-nx2kg7ti3w]

А не проще было коленчатый вал от машины поставить?

[@HTN_creativity]

I don't understand what you mean, can you be more specific?

[@JSchrumm]

Coil bind needs springs that won't bottom out.

[@hasanok1964]

No need for springs and crankshaft. The flywheel continues to rotate by inertia.

[@HTN_creativity]

I think so too but usually all the ways I think it will still stop

[@waltermthokozisimathonsi9133]

Spring prices have shot up 10000%😮😮😮😮😅😅😅😅

[@HTN_creativity]

what do you mean i don't understand

[@ibrahimgonzalez6270]

Está mal hecho, pusiste 4 resortes, con diferencia de 180 grados, o sea están en contra posición, la fuerza que uno hace el otro la anula, está mal hecho. Por 4 o seis pero con diferencia de 45 grados y verás que funciona que ninguno quede en contra posición con el otro. Es tan facil, QUE LES PASA????

[@HTN_creativity]

I still believe in my point of view and defend it, because if possible, people would have used it instead of water and wind since ancient times.

[@HTN_creativity]

After receiving a lot of feedback from many people here, I did it again and tested it with some devices like lo so, elastic band and the result is in this video: kzbin.info/www/bejne/lYq8pouOabuWbNE

[@mohammadmohammadi173]

Thank you sir for clarification

[@gr8nrg80]

I have made many of these that do work and work very well. I am from the US. I get your skepticism. I was there too. It was my 5th version that actually worked. I made many changes and many different variations Yes, this one has some problems. It took several tries to get it right. There is a learning curve to it for sure. When it works. It works. Nothing worth anything works the first time.

[@powercomm]

There are 2 sets, one works and the other doesn’t. And you made it work . Can you send me your short version of your video?

[@HTN_creativity]

I had 4 springs all the same, and it only pulled towards the middle, which it would not be able to do unless the spring could stretch properly on each side.

[@HTN_creativity]

After receiving a lot of feedback from many people here, I did it again and tested it with some devices like lo so, elastic band and the result is in this video: kzbin.info/www/bejne/lYq8pouOabuWbNE

[@offgrid5817]

He's put crank 2 up 2 down that's fighting its self.... he should have mounted them at 90degrees 180°/270°and 360° so it have even pulls 😅

[@PamelaRiley-gg9dy]

You are nothing but a bold faced LIAR. If you had succeeded you would be richer than Elon Musk now and actually put him out of business. Enough of your nonsense - stop smoking that stuff - it's not good for you!!

[@Mouloud-we5ip]

هناك طرق لي جعل هدا المحرك أن يعمل لاكن هوا ممنوع يدر الإقتصادي الدول لاكن في المستقبل إن حثث شيئ ما سنخرج نحن ونواجه المشكل بكل ثيقة نحن المخترعون بدون وثائق ❤

[@user-im8yv6ne4f]

hi...try connecting springs with no load when it is at the top and bottom of the of the turn shaft not the sides.....try 1 quarter sections on the connecting shaft...instead of half..... haven t made one.... but thats what i can see...keep tying ...consider it an education...have a good day...

[@HTN_creativity]

After receiving a lot of feedback from many people here, I did it again and tested it with some devices like lo so, elastic band and the result is in this video: kzbin.info/www/bejne/lYq8pouOabuWbNE

[@8dmusicmashupworld862]

Thank you ❤

[@powercomm]

Can you adjust the the springs and make them tighter?

[@ibrahimgonzalez6270]

Esa no es la solución

[@carlosmattos5979]

Se colocar uma eletro válvula funciona sim. If you put an electro valve in, it will work.

[@HTN_creativity]

I also think it could use less fuel.

[@bernardclark6905]

Using an engine crank shaft works and balancing the flywheel.

[@HTN_creativity]

yes very possible but i still doubt what you said let me try again if you have any ideas please let me know

[@prajapatijitu2187]

Put the iron rod in the round as we fit the screw and then the spring will be done.

[@HTN_creativity]

I'm wondering where I went wrong.

[@chandercreative]

la fuerza se queda en el punto 0 por lo tanto no funciona mi amigo solo hasta que pare el impulso pero yo lo intente de otra manera y lo lograre muy pronto en mi canal saludos

[@HTN_creativity]

lo intentas y todavía lo dudo, no creo que pueda funcionar para siempre

[@LouisRua]

Très bien ce système

[@TitoJoebs]

#HTNCreativity how about following the crankshaft orientation of a 4 cylinder car > 1, 3, 4, 2 movement order

[@HTN_creativity]

good idea i will try

[@mr.gfresh8084]

The springs are not tight enough bro

[@HTN_creativity]

I had 4 springs all the same, and it only pulled towards the middle, which it would not be able to do unless the spring could stretch properly on each side.

[@olaniyibakare5865]

Try making it 6 springs

[@fewcherrymusiq4695]

You need to keep springs only on one side of project

[@HTN_creativity]

let me try your idea

[@mertiHQ]

three springs from the bottom, offset 120 degrees, or three springs from three different points, 120 degrees apart

[@jeremyclark3769]

You have to have a ear on all four sides of the shaft.

[@rdiaz978]

le farta colibracion?

[@rooxynala841]

All the free spin that you gain maybe will be useful for fill a thank of air wich at one point will release the air to give torch at the well

[@HTN_creativity]

I don't understand what you mean, can you be more clear?

[@rooxynala841]

@@HTN_creativity if you manage to exploit the rotation of the flywheel by applying a piston that conveys air into a tank which at a certain pressure releases the air towards the same flywheel equipped with blades, the flywheel would acquire the torsion that it loses due to the friction of the components

[@thoqueen9882]

Logika keabadian tidak perlu distart,akan langsung berputar

[@HTN_creativity]

Benar sekali! Logika keabadian memang selalu ada dalam siklusnya sendiri, siap untuk berputar tanpa perlu diaktifkan.

[@ZamriHeyhey]

if u change to rubber.. will it work ?

[@HTN_creativity]

we also discussed that option, so today we will try and re-record the video

[@ishtiaqahmed4601]

یہ سسٹم اگر آپ ونڈ پاور کے ساتھ کام میں لیں گے۔ تو بھت بھتر نتایج دے گا

[@HTN_creativity]

thank you

[@offgrid5817]

You put crank 2 up two down??? Try putting them staggering at 90 degrees from one next to it so it pulls evenly as it turns

[@ihabboutaleb3283]

خطأ في استعمل النابض لانه. يعمل على تخميد الحركة

[@HTN_creativity]

I see people use springs a lot, I have the same thought as you, so what do you think we should use to replace springs?

[@bongchuyengiuctuong1150]

Video chân thực nhất

[@HTN_creativity]

đúng vậy

[@user-xc7rq8wp8v]

Bering pegasnya harus sebanyak diameter as

[@HTN_creativity]

do you believe it works

[@genie5043]

The spring is too stiff. Try changing the spring

[@HTN_creativity]

I think no matter what spring there is, it won't be able to rotate.

[@LeonardoFabioUlloaQuintero]

Good start Mr. Creation

[@HTN_creativity]

Thank you so much 😀

[@bakhtzamankhan3360]

Very good message bro❤

[@HTN_creativity]

I don't know how they made it work, but I tried it and it didn't work.

[@wandermiranda88]

What's left is just to add an electric motor for it to act as the engine later, because what it initially needs is this rotation to generate the energy and thus have infinite energy from the electric motor or until the coal runs out or the diode burns out.

[@HTN_creativity]

Do you mean let it generate electricity and use that electricity to feed it? That's a good idea, I'll try to create it.

[@wandermiranda88]

@@HTN_creativity Yes!

[@tietieraymond]

If there is anyone that actually practiced one , please tell us the performance. Did it really work or not ?

[@wpower5886]

🎉🎉very nice 11:50

[@thamizharinmarapu]

i want this one

[@HTN_creativity]

I think the truth is the truth, right?

[@RanaKaleem-i9x]

Fail ni h sir ap springs ki setting thek se ni kr rahe jb spring opposite side ho to bilkul free hona chaye butt ap k modle m ye chez ni h ap is ko better kren ye chale ga jb one side spring force lga rha ho to oder side spring free hona chaye

[@HTN_creativity]

I will try your idea

[@alihossain8739]

over power use for welding.

[@AnmolSingh-kc3nc]

baring wheal distance gave so big . Shorts gave

[@alihossain8739]

used normal weldin bar

[@MrAcapela]

try shorter and stronger springs,,coz i think the wheel is too heavy and that good ,but the sptrings dont have ennough tension

[@HTN_creativity]

I think if it gets too tight it will pull to a stop, but I will try to see if your opinion is correct.

[@MrAcapela]

@@HTN_creativity Thanks ,,about electronic im self taught by youtube,,,i couldnt understand the transistor,, i made several mistakes ,coz polarity is very esential ,wrong polarity doesnt work ,,,i managed to make it work now,,,i believe those videos are true ,,but the right configuration is necesary and only by repetion we get it ,,greetings from Dominican Republic

[@user-ke1kc2wn9e]

Я думаю у тебе проблема с пружинами

[@Rolls-786]

Hi

[@ungerspretoria8280]

Guys, stop and think...what causes the machine to start? Ok, by rotating the flywheel very fast? So now the flywheel is spinning, and pulling with the same force on the springs with every rotation...same force means no new energy is introduced, and it will stall once the rotational energy in the flywheel is used up, how soon it stops depend firstly on flywheel size, initial rotation speed, as well as friction on the bearings, weight of the parts, (gravity just loves any sort of weight, needing more energy to move) atmospheric friction etc...hope this helps understand these fake perpetual machines. It will rotate longer with just the flywheel....

[@gardon60]

Ça ne sert à rien s'il s'arrete !!

[@muhammadfayyaz7992]

FAIL IDEA

[@RanaKaleem-i9x]

Ye chale ga inshallah Allah

[@abidhusain01]

You at good man

[@HTN_creativity]

Thank you for this encouragement, I think authenticity is always the most important

[@ismailibrahim7948]

Thanks for the prove

[@HTN_creativity]

I will test to see if it can run forever, I don't really believe in this

[@vinhhuu72]

Tưởng quay vĩnh viễn ai ngờ quay do quáng tính

[@HTN_creativity]

I agree with your idea

[@AlekseyVaneev]

You need a counter-balancing weight (wheel) on another side-your shaft is too long

[@HTN_creativity]

if so i need to make it shorter do you have any ideas i still dont believe it can spin forever

[@AlekseyVaneev]

@@HTN_creativity I think you just need to add another smaller flywheel at another end. So that the mass of the larger flywheel does not put lever pressure at the end of the shaft. Without that there's upwards pressure at the end of the shaft. All working designs have either shorter shaft or a counter-balancing flywheel.

[@AlekseyVaneev]

@@HTN_creativity or some designs have the flywheel between bearings, not outside

[@RudiHartono-fl4hq]

Stupid free energy

[@mofah2401]

هذا خطأ المفروض ربط السبرنكات يكون دائري متكامل وبهذه الحالة ستنج ..محمد

[@HTN_creativity]

Where do you think I went wrong, let me do it again more carefully with bigger flywheels

[@HEAVENISREALHELLISREAL]

Are you sure for this project, I will try my own if he work ,I give five star.

[@HTN_creativity]

you try it and i will try it too

[@HTN_creativity]

I made a video of the fix - Will it work? : kzbin.info/www/bejne/lYq8pouOabuWbNE

[@carltonwizzle1420]

Your fly wheel needs to be heavier

[@HTN_creativity]

why do you think so, i think not

[@carltonwizzle1420]

@@HTN_creativity ok sir

[@rickyrodriguez443]

It’s not true it will not work

[@HTN_creativity]

there are still a lot of people telling me it will work, i think. do you have any ideas for me to test to prove what i think is wrong?

[@mihaitavasilas3655]

distanza biele tropo grande veve essere più vicina del axe .

[@владимир-е3б5ф]

не правильная сборка учите матчасть

[@user-zl9xb4tm7b]

Во-первых маховик шатается, а во-вторых неотбалансированный

[@mdjihad9624]

👍👍

[@maandj821]

Ok

[@Dilesh_Ritik_Baghel]

Vest

[@innocentnek]

why you people no lunch in pakistan market ???

[@mrhaki1962]

Normalement il ne doit pas s'arrêter

[@HTN_creativity]

Đúng vậy! Sự kiên trì là chìa khóa để đạt được những điều tốt đẹp trong cuộc sống.

[@lalbiakdikabda1143]

Ka rindan tawk vel ani.

[@TrabalharPorContaPropria-xq8ub]

valeu

[@HTN_creativity]

Thank you

[@NakibJumaev-cy8tx]

Мы давно знаем что этот не работает

[@weradorn2503]

Так пружины слабые для этого моховика.понятно чего он остановился

[@HTN_creativity]

I think if I stretch it too much it will stop faster, but I will try your idea.

[@Motivational-c9o]

Fake friends never

[@HTN_creativity]

I think everything that is assumed to exist is wrong.

[@ctrltech5919]

Oh

[@AsfiaashiMakers]

Flop hai

[@NadirNadiro-e3r]

il ya larotation et la puisonse il monque la vitese

[@user-rk2ol1ob7m]

👎🏻

[@muzaffarnarmetov4855]

🤣🤣🤣🤣

[@user-ex2ig2zq7z]

ออกแบบไม่ถูกครับจะไม่ส่งเหนี่ยวนำหมุนแล้วก็จะยุดเองในหนึ่งนาทีนะใช้งานไม่ได้ครับ

[@HurovKhushnud]

Ну как Хейтеры

[@HTN_creativity]

thank you, exactly like that there is nothing great here

[@nammuajtsaavyaaj4261]

😂😂😂😂😂😂😂😂😂

[@user-db4kw4yd3c]

О четырёх тактный мотор какая мощность

[@HTN_creativity]

Cảm ơn bạn đã đặt câu hỏi hay này! Sức mạnh của động cơ bốn thì rất thú vị và có nhiều điều để khám phá. Hy vọng bạn sẽ thích video này!

[@njolyapeter5276]

😂😂 always there's nothing for free

[@HTN_creativity]

I think so, too

[@freddykyungu7068]

Félicitations vraiment

[@ЕвгенийБелошапка-з3г]

А почему не под 90 градусов или 120?

[@juandanielgomez5509]

Esta mal hecho, porque se para solo ,si estuviera con las dimensiones correctas nunca se parara

[@HTN_creativity]

Lo hicimos con mucho cuidado, no pensé que pudiera girar para siempre.

[@kobusbarnard2531]

It don’t work 😮

[@HTN_creativity]

yes i see a lot of people do it and i did it and it didn't work

[@nsudeabuchi8340]

I want to try mine. But do you think the spring was properly tensioned ?

[@user-zv6dz6ie6z]

Жигит

[@Sanilal-te2ph]

This dicain is wrong

[@HTN_creativity]

So what do you think I should do next?

[@HTN_creativity]

After receiving a lot of feedback from many people here, I did it again and tested it with some devices like lo so, elastic band and the result is in this video : kzbin.info/www/bejne/lYq8pouOabuWbNE

[@shahidiqbal8511]

Fake

[@HTN_creativity]

I don't understand what you mean, can you be more specific?

[@HaiderAli-yi2mr]

just wasting of time

[@HTN_creativity]

I don't understand what you mean, you think it won't work right?

[@sougatapatra9675]

Sir upka contact number chaheya ... Mana masen lana chatahu

[@HTN_creativity]

I don't understand what you mean, please explain more clearly for me to understand.

[@lennartbyhlin2868]

Thank you!

[@HTN_creativity]

You're welcome!