BUILD GUIDE: RS187 Luchadora

[@outofdarts]

I'm really excited to see more of these in the field. We've got more tutorials coming, so stay tuned!

[@quiettoni913]

Really excited to get my pair, but on that note if the magnet holdstere bolts come preinstalled then how will you know which side to install them on? :P

[@outofdarts]

@@quiettoni913 We're still working out the bugs with our process, but if we preinstall them, we will either have the option in the listing itself or we will email you before installing them.

[@squirts1]

question... Is there any practical reason NOT to just use the powertool battery packs I have all over my garage to run stock nerf blasters? I have 4v, 12v and 18-20v lithium tool batteries and chargers. There are snap in adapters for the batteries can easily be attached to most blasters. I'm not looking for full rebuild mod performance, just an easier battery solution. Most are running stock on like 9v roughly right? so using 12v (10.8v) drill batteries might perform a little better but i doubt will damage anything.

[@quiettoni913]

@@squirts1In a word, output. Lipo batteries are used because they combine high ampage output and small size. Hitting a powertool 18650 cell repeatedly with stall current demands can be a good recipe for a battery fire. If you dont disassemble the powertool pack then the overdraw protection will probably kick in.

[@squirts1]

@@quiettoni913 right, because drills, saws, and impacts don't pull high current? Also, As I said, I'm talking about stock motors. It sounds a little like you are just parroting what you've heard around the hobby without actually understanding the full context.

[@Simglego]

Even though I didn't buy much kits, I still enjoy watching assembly guides lol.

[@72dpionline]

Still the best quality video in our hobby, second to none. Thanks for taking video and audio so seriously.

[@ericosman4410]

When I assembled my luchadora the issue I had was that I pushed the flywheels on too far. When I finished assembly I found a shim that was provided with the kit. I don't recall seeing that in the build video. I was able to pry the flywheels but be warned they do not move easily! All in all it is a nice kit with a fantastic feel in the hand. Keep up the good work out of darts!

[@outofdarts]

We didn't have the shim gauge finalized when filming, so we went for the "eyeball it" approach. Glad you're enjoying the blaster!

[@Eulemunin]

Enjoy your camera work especially knowing it was a pain. Lovely work as always.

[@definitelylukadoncic]

This is so cool. I learn new ways to do certain things. I thought the dart pusher was amazing.

[@crazesn8966]

Hi sir can you please make a video on full auto gryphon build guide

[@derekwagner157]

I think building this will be fun.

[@davidwatzek1785]

I really hope if the Brushless version does happen you'll do another great build video like this

[@outofdarts]

I don't know what Luke's plans are, but I certainly think when the time comes we can at least film a short supplement video on the steps that are different. - Perry

[@lucasmcdonald9]

Would love an option to just buy the hardware!

[@Sillybutts]

Really cool!

[@aleoisgroot1838]

I like it the build and maybe you could consider doing an infinus mod guide

[@Motionnerf]

Tutorials are a lot of work and dont get as many views, with that being said Luke is also already super busy constantly so its not likely he'll do random tutorials for older nerf blasters. But if that means we get something else super cool that's fine by me xD

[@aaronbane969]

I have a question. I'm new to the modding side of Nerf. I ordered the Phoenix 2.0. It worked for a week. Now all of the sudden, the pusher doesn't work. At first it'd fire a full magazine, then stop working. Could the pusher motor be dead? Or could there be a short somewhere? How would I go about diagnosing the issue?

[@outofdarts]

Shoot us an email to [e-mail] We'll be much better able to assist you there!

[@thiccnuke8288]

If you built it yourself, it might not be a bad idea to open it up and check your soldering connections. I'm kinda garbage at soldering, and its caused me some similar problems in the past

[@builderbb8767]

Perry did you film this upside down and horizontal flip the footage? That drill spinning backwards as screws go in was bugging me out

[@outofdarts]

Nope! I imagine that was just a coincidence with the timing of the drill and shutter speed of the camera.

[@templerea5262]

1 minute in: glittery green? Mermaids tail looks blue to me. Is luke colorblind or is the video color corrected?

[@outofdarts]

It's more of a teal, which is more green or blue depending on the lighting, the camera sensor, or even the screen you're watching it on. We only do minor corrections to make colors pop and add some contrast into the image.

[@llsnyderj]

Great video as always! I am curious what are the cage crush dimensions available for this? Specifically what is the crush of your Pulsar variant?

[@outofdarts]

Pulsar crush is 33mm to achieve 100 FPS; Daybreak is 40.3-41mm to achieve 130-150 FPS, respectively.

[@llsnyderj]

@@outofdarts interesting thanks!

[@Barber00117]

None of the bags of screws came labeled. Need help with this, please.

[@rickhunter1984]

I suggest you add peg keys during the printing to the kits for easy assembly?

[@outofdarts]

I'm not sure what you mean. If you don't already have an M2.5 hex key, we sell a simple one for $0.75, but I'm not sure how that would help during printing.

[@rickhunter1984]

@OUT OF DARTS if you have ever made a model 2 part cast with epoxy then you know that a molding key is if not I suggest you check out it yourself for the info.

[@thiccnuke8288]

This might be a little old, but could you do one of these for the Caliburn v4? I know several people who would appreciate it, myself included!

[@outofdarts]

We'd have to ask Captain Slug first, but we could maybe do that!

[@davida6889]

Why are the screws metric? Standard SAE is easier to hunt down at the local hardware store in the U.S. .... ?

[@outofdarts]

We provide all the hardware in our kits and metric machine screws so you don't have to source them. Also, we continue to use the same type of screws as many of our previous products so that you can service and repair any of our blasters in the field with only a limited number of tools; it just so happens that those are metric.

[@justAguyDs]

Battery door frame?

[@602Pinstriping]

Did he say you could get the stl files and print your own blaster??

[@nickwalker9780]

Hey, do you guys repair buzzbee guns? I have an buzzbee ultimate beserker that doesn't shoot missles because it won't hold air. I would really like to know.

[@outofdarts]

We don't do repairs, but we might be able to help you troubleshoot and repair it yourself. Shoot us an email to [e-mail] !

[@nickwalker9780]

@@outofdarts I have no experience repairing dart guns of any kind. Do you know anybody who will repair any dart blaster?

[@outofdarts]

Not off the top of my head, no.

[@BreezyE.]

@@nickwalker9780 unless you can find parts for it you might aswell just get a new blaster

[@nickwalker9780]

@@BreezyE. I was hoping this guy carried air plungers because that's why the missle launcher doesn't work. This version of the gun is an extremely rare find. But ima just sell the one I got for cheap for those who likes to mod/repair guns. It's a collectable gun, so ima wait until I can find another one

[@hhnvuokjr634]

Is pom better than abs

[@outofdarts]

It's not necessarily better or worse. POM (AKA acetal or Delrin) does have different properties that make it better in certain applications, but ABS is better in other use cases. So it really depends on what you're making whether one will be better than the other.

[@602Pinstriping]

Would of been cool to see a OD GREEN or FDE blaster