Build Idea - GRO2 Tsunami SEABOARD, Budget gravel bike build

[@cozyian]

6:38 - ganto ung brakeset na kinabit namin sa Sagmit Adventurer CX, Ztto flat mount din. Unfortunately mahina kapit ng metallic brake pads. Pero nung pinalitan ng B01s resin pads ng shimano, gumanda na kapit nya, nakakapagskid na. Niliha nalang yung gilid ng pads para kumasya.

[@nopicture2027]

Nice! What's the maximum rear tire width?

[@bipolarbandit6660]

Far from budget in my wallet. I'd be stoked to get any of these parts on my ride. Real nice bike👍

[@hepebikes]

Thank you sir👌

[@АлексейК-ь3в]

friend tell me please on the video it is not clear you need to put spacer rings on the carriage?

[@joominandrewpark5804]

Hi, do you know what's the biggest chainring that can fit with a 1x drivetrain setup on this frame?

[@hepebikes]

Hello sir sorry for my late reply, the biggest chainring that can fit of frame is 40t👌

[@Andy-gh9gz]

what type of lubricant do you use when assembling a bike?

[@chooselife5266]

What tire size of this bike can carry?

[@TheFRANCOTDM]

Ciao quando pesa in totale la bici?

[@DiTutto-id4gk]

Meglio seaboard gr02 o koozer cx5000? Quale migliore ?

[@hubertoleo2382]

Sir hepe gdpm,ask ko sana yun size ng frame & yun size ng front hub my nilagay ka sir na adaptor sa front hub,pede ba ma kasa un 15x100 na hub sa fork walang bang magiging problem? Thank you sir hepe more power to your wonderful vlogs.

[@hepebikes]

Hello sir sorry for my late reply, ang size po ng frame is 50cm x 48cm ,and yong size ng front hub is 100mm hub spacing x 15mm thru axle diameter,nilagyan ko po yong front hub ng thru axle converter na 15mm to 12mm ,gawa ng yong diameter ng axle ng front hubs is 15mm at para maging 12mm,ginamitan ko po ng thru axle converter,kaya po hindi na po akl nahirapan maghanap ng hub 12mm 😃

[@hepebikes]

And about naman sa performance sir goods na goods naman po yong hub 👌

[@epoypalaboy]

Cool!!! Sir pwede kaya tiagra groupset?

[@hepebikes]

Thank you sir ,pweding pwede po sir 👌

[@jericksiguan4488]

hindi po ba siya nag to-toe overlap?

[@asdyberinguela1534]

Mga gano kabigat po ito sir?

[@CrazyMilkman27]

Kung grx400 2x magkano aabutin?

[@АлексейГи-в9о]

Hello, on this frame possible to mount a rear trunk? I would to buy this frame from China

[@juanmiguelcabangon9826]

Hello sir Hepe, ask q lang anong brand ang ginamit mu sa front wheel? Saan pwede maka avail ng end cap ng hub na for 12mm?

[@hepebikes]

Hello sir,magandang araw po yong brand po ng hub na ginamit ko sir is PAZAK hubs, bali meron na po syang kasamang end cap sir na pang thru axle pero pang 15mm, ginamitan ko lang po ng thru axle converter na 15 to 12mm yong hub sir para maging 12mm, and about naman sa converter sor meron po kaming available dito sa @CyclingCulturePH 👌

[@xa.j.x]

Ano itsura ng bottom bracket welding? I mean sa labasan ng tubig.

[@owliber]

Boss tanong lang po, anong klaseng FD ang pwede braze-on ba yan or clamp? Pag clamp po anong size kaya?

[@kimoutofnowhere3669]

Hi sir. Anong size po ng BB ang ginamit dito para mag fit ang deore cranksets? Thanks po sa sagot and more power po!

[@hepebikes]

Hello sir,yong ginamit naming BB sir is SATURN sir ang size po is BB-C68/BC 1.37 x 24t x 68mm/73mm ,pag sa shimano naman po is Deore SM - BB52 Shimano

[@kimoutofnowhere3669]

@@hepebikes maraming salamat po sir. 👌

[@chonpi009]

ประเทศไทยมีขายมัยคับ

[@fadijatama4454]

helo sir, question , is that smooth enough brifter sora to RD alivio ?

[@perwiratempur]

Is this frame too aggressive for a gravel build? I see you put a lot of spacers under the stem and the saddle - handlebar still look low like a roadbike

[@vinceguevarra813]

Hi Sir..5'3 height ko...ano po kaya frame size ang pwede sa Tsunami Seabord GR02?..also, pwede po ba hindi dropbar ang gagamitin na hadle?....salamat

[@georgvaht5116]

650x47 is it possible ?

[@hepebikes]

Hello sir magandang araw, im not sure if kakasya ang 47c, ayon kasi sa specs ng frame hanggang 40c lang ang maximum tire clearance

[@ralphcadiz3023]

Hello po! Kaya po ba sa rear niyan ng flat mount to post mount adapter for 160mm or 140mm lang max?

[@jedunboxing4127]

Wala bang ndi carbon yung fork,Yung chromoly din na bambaragan?

[@aryoyk]

hello, if i have a height of 168-169 cm, what frame size can i use?

[@hepebikes]

Hello sir sorry for my late reply , if you are 5"6ft./168cm tall ,the frame can fit in your height sir is size 47 x 50

[@juanmiguelcatap4906]

Boss tanong lang po ano po pinakamagandang frame sa seaboard? Thank you po

[@urfoolingmyleeg]

Nilagyan niyo po ba ng cable stop yung housing sa downtube?

[@hepebikes]

Hello sir sorry for my late reply, hindi na po ako naglagay ng cable stopper sa down tube sir nakarekta po yong shifter cable haosing hanggang sa chainstay sir ,may nakaabang na cable stopper sa chain stay sir

[@urfoolingmyleeg]

@@hepebikes salamat po sa reply. Pero kung mag 2x po ako, baka kailangan po for FD?

[@hepebikes]

@@urfoolingmyleeg your welcome sir 🙏🙏

[@PapaWij]

Sir hepe ilan po max teeth ng cogs pag alivio rd?

[@hepebikes]

Hello sir ang ginamit naming sprocket sir is 11t. x 36t. ang pinakamax na pwede mong gamitin sir is 11t. x 40t. sir

[@PapaWij]

Tnx sir

[@hepebikes]

@@PapaWij your welcome sir🙏

[@mikewenmar]

Pwede po ba instead of Deore na Crankset is Sora na Crankset at FD ang gamitin? More power po sa channel!

[@hepebikes]

Hello sir ,yes sir pwede rin po gamitin ang 2x crankset na SORA sir 👌

[@mikewenmar]

@@hepebikes Parang bitin kasi sa patag if deore lang. Thank you sa pag reply po!

[@hepebikes]

@@mikewenmar your welcome sir 🙏

[@geraldmedel]

Chief, question. Is a GRX 2x 11 speed (48/31) crankset compatible with a GRX 400 RD? Thanks in advance!

[@hepebikes]

Hello sir sorry for my late reply, yong GRX 2x 11 speed sir ,STI po ba yon? Pag 11speed po yong STI nyo sir , negative po sya sa GRX 400 na RD sir,gawa ng 10speed lang po yong GRX 400 na RD sir 😃

[@geraldmedel]

@@hepebikes 10 speed sir ang STI, FD and RD ko (GRX 400). The available crankset kasi is the GRX 810 (48/31, 11 speed). Will the crankset work with my group set?

[@hepebikes]

@@geraldmedel yes sir pwede po yong crankset nyo sir 😃

[@geraldmedel]

@@hepebikes Good to know, chief! Thank you! More power to you and your channel! RS!

[@faiarrieta6290]

Hi sir, magkano yan buong bike na ganyan? Ganyan ang trip kong gravel, salamat sir

[@hepebikes]

Hello sir sorry for my late reply, ang inabot po ng build na sir is nasa 45k plus sir👌

[@paolocruz3213]

Sir may tanong po ako. Pwede po ba ito frame set na ito sa hybrid na naka sx sram 1 by 12 gs. Salamat kung sasagot.

[@kencals]

Pwd po ba speedone solder na hubs dyan boss?

[@hepebikes]

pwede pong gamitin sir basta convertible po yong hub sa thru axle sir👌

[@gaillesaca5849]

Sir ano pong brand ng gulong? Salamat

[@hepebikes]

Hello po, ang brand po ng gulong na ginamit ko sir is panaracer 650b

[@ivanmahusay4315]

Ano total weight kinalabasan

[@hepebikes]

Hello sir sorry for my late reply, im not sure sir kong anong total wait ng whole bike, di ko na natimbang after ng build, pero estimated ko sir nasa 9kg to 10kg sir 👌

[@skelethor2550]

Magkano inabot boss?

[@hepebikes]

Hello sir sorry for my late reply, ayon po sa my ari ng bike sir almost nasa 38k daw ang nagastos nya👌

[@10OZDuster]

Sir meron bang ibang magaling na frame maker sa pinas other than Ave Maldea?

[@bisikleta1015]

Devel sir local yun

[@10OZDuster]

@@bisikleta1015 yes but they don't make bikes the bikes are made in taiwan

[@SethMartinPHRN]

Ano po hubs niyo sir? Nice build btw sir😊

[@renzodelacruz8924]

hi po may tanong lng po ako 700x35 po yung gulong ko, pwede ko po bang gawing 38?

[@hepebikes]

Hello sir sorry for my late reply, Yes sir kasya po ang 700x38c sa Tsunami Seaboard GR02 sir 👌

[@johnjoestar5111]

Hello po, pwede po ba ang GRX 2x set-up sa frame na yan? or 1x specific po ba sya.

[@hepebikes]

Hello sir sorry for my late reply, pwede po sir,pwede po ang 2x setup sa frame sir, pag bumili po kayo ng frame na ganito sir may kasama syang FD clamp para sa FD,pwede rin po kayo gumamit ng pang roadbike crankset

[@johnjoestar5111]

@@hepebikes salamat sa info.

[@hepebikes]

@@johnjoestar5111 your welcome po sir ,ride safe 🙏

[@lanvinpierre]

anong max clearance nito sa 650b? 48c?

[@hepebikes]

Hello sir sorry for my late reply Ang tire max clearang lang po ng GR02 pag 650b sir nasa 40c to 43c lang po sir

[@paolopolicarpio3990]

magkano po inabot na price nitong build para may idea lang po.

[@hepebikes]

Hello sir ,yong frameset po sir nasa 27.8k at yong inabot po lahat ng components nasa 36k sir

[@bikepink4768]

Sir hindi po ba 17k lang ang frameset po?

[@bradd3016]

Chief tanong ko lang po, di ba kaya ang 160mm na rotor sa gr02?

[@hepebikes]

Hello sir sorry for my late reply Sa front sir pwede po ang 160mm,and rear naman sir medyo alanganin yong 160,gawa ng pag nag 160mm ka na rotor itataas mo yong caliper,pero parang sasabit yong pinakacaliper sa seatstay ,pinaka safe parin yong 140mm na rotor sa gr02 sir sa rear

[@bradd3016]

@@hepebikes salamat sir! Buti 140mm na ung na order ko na rotors! :)

[@warpampee]

Ano po size ng frame?

[@hepebikes]

Hello sir sorry for my late reply,ang size po ng frame na ginamit namin sir is 47cm seattube center to top/50cm toptube center to center(small)

[@renzodelacruz8924]

ano po size ng gulong?

[@hepebikes]

Hello sir ang size po ng gulong sir is 650x35c

[@renzcasas875]

Anong frame size nito sir? 47 or 50?

[@hepebikes]

Hello sir ,size 47 po sir

[@renzcasas875]

@@hepebikes ayun thanks po sir, planning to build din.

[@harys7439]

Boss magkano inabot ng full build niyang bike mo?

[@hepebikes]

Hello sir, ang inqbot po almost nasa 50k + sir

[@pikachumoonrabbitcookie2365]

hm ganyan assemble

[@hepebikes]

Hello sir sorry for my late reply, magandang araw po, ang inabot po ng buong buil sir 50k sir

[@mattewis5789]

The welds look very bad.