Build Review - Axial Capra - WATCH this before you Buy and Build!

[@tomandrews5392]

Not sue if your tired of hearing from me one other discovery was the idler gear to the slipper gear shows a shim being installed towards the trans side this left a misalignment of the idler to the spur ..I found placing the shim on the cover side corrected this misalignment issue...

[@TheRCNetwork]

Ah, good catch! Never tired of constructive comments!

[@andrewmurphy8724]

You pointed out my biggest problem with the Axial Capra at 5:58. They do not provide the complete servo saver but make you buy the recommended servo. What I did is bought a Savox servo and then got a servo saver for it that I used. Kinda annoying that Axial did this and some people will be put off about it.

[@TheRCNetwork]

Yes, I completely agree. Later, many of us found out that the Spektrum servo that is recommended is an Axial rebranded servo from the Yeti Jr, and Axial has a parts tree that will somewhat solve this. Simply adding that parts tree into the box would let other servos work easy. Hopefully Horizon/Axial figures this out.

[@andrewmurphy8724]

@@TheRCNetwork Looking online I found the parts tree at AMain Hobbies. The part number is AXI31009. But Amain has it on back order and on ebay it is part of the complete 2 speed transmission set. So the parts tree is available but at this moment its hard to get.

[@82394forrest]

I have the blue methods too. Many others as well but that blue would look excellent

[@TheRCNetwork]

Nice! Yes, it turned out great!

[@josh_rit8045]

Use the bronze proline rims. They look so much better

[@TheRCNetwork]

I hate it...blue won. I Painted the panels this weekend

[@anderson8361]

Great review!! I am immensely pleased that Axial has made the Capra a kit. Tires not included does not effect me...most people have a brand and style they like to go with. The blue Vanquish rims LOL. Over all it looks to be another solid kit from Axial. Thank you for the insightful review.

[@TheRCNetwork]

It is pretty solid! besides the few manual mistakes and dig servo issue, this is the RC to have in 2019

[@anderson8361]

@@TheRCNetwork I ordered one last night after watching your review LOL. I look forward to the build and have made notes on the issues you spoke of. Thank you again for a well done review.

[@TheRCNetwork]

Military Scale Workbench nice! Happy Building

[@tomandrews5392]

Starting build your tip to use Chap stick was great and got servo same day as delivery of kit...One thing o not over tighten ring of dig will not allow install of pin...

[@TheRCNetwork]

Back off the plastic loop - if you over tighten, it makes the pin hard to insert

[@woodland_rc4712]

Good to see you back Rich covering another Axial product. You always do some of the best explanations on the builds. I know you’re usually about the blue, but the bronze looks real good.

[@TheRCNetwork]

Glad to be back - especially when the RC world gives us cool rigs to cover!

[@davidspinney7344]

I'm fine with no tires, it's a darn good price for what you get. Thanks for all the info, very thoughtful!!

[@TheRCNetwork]

I can’t agree more. And, always glad to help!

[@CCxRC]

Thanks so much for this! Waiting on my Pre-order to arrive to get started on it. Glad you pointed out all the parts that would really slow me down since I don’t usually buy kits.

[@TheRCNetwork]

Hey Tony - glad to help out. 😃👍

[@garettbodel3002]

What's up with the icy conspiracy buddy. You've been sick that must suck. I hope you get better. Now what is it going to be every Tuesday night. The show with Matt last week was really awesome. Picked up a couple stickers. Keep up the good work. I hope you feel better soon

[@RTmadness1]

It sure would have been nice to see a top view in the size comparison but I understand your time constraints. There is a point after midnight when finishing is all that matters. Thanks for all the information and another great video. It's good to have you back. It's amazing Axial caused all the controversy over one tiny plastic part.

[@dschenk952]

Good video. I believe it should have come with tires, the DIG servo, and any other parts needed to complete the build. My local hobby shop only ordered the kits, and no other parts needed to complete the kit.

[@TheRCNetwork]

Very good point on that one - local hobby shops not being able to sell the entire job. Well hopefully you’ll get it all sorted out.

[@jeffsanden251]

I think more kits should come with out tires. Seems like everyone has there personal tire choice anyways and buys there specific tire right away. I also like the bronze rims

[@TheRCNetwork]

The only axial kit I ever ran the kit tires.......Yeti Kit. That’s it. I agree, do without tires, but include the dig servo?

[@jeffsanden251]

The RCNetwork yes, should have included that. Until watching your video, I didn’t know you needed a specific servo. I already bought a micro JX. I’ll have to go pick up the spectrum one now.

[@TheRCNetwork]

I haven’t verified, but here’s the part that was mentioned on The Capra group on Facebook: www.axialracing.com/products/ax31009

[@steverc1986]

thank you for your effort and everything! this is awesome video. I am building the same car right now. All my issues are solved now after watching this video👍👍👍

[@TheRCNetwork]

Cool, glad to help! Happy RCing

[@BlackBirdFPV]

Im asking myself if this Carpa would can just do rock racing and bashi g around like a wraith or a bomber? It look pretty good 😍

[@TheRCNetwork]

I think it can....even better than the Wraith. The Wraith was quite fragile.

[@BlackBirdFPV]

@@TheRCNetwork can't wait to seenyour runing video 🙂

[@adamhudson6812]

I had no idea you were producing videos again! Great build and really enjoy the video!

[@TheRCNetwork]

Thanks for stopping by and checking! Yeah, I've put out content lately, just not as often as I used to

[@ekpauly]

Very informative, thanks for the first look. Would have been cool if you put a set of 1.9 wheels and tires on it for the comparison shots.

[@TheRCNetwork]

Thanks for stopping by. When I shot the video - I forgot I mentioned the comparison until late in the evening while editing. Went out and attempted to add some wheels/tires, but I’d have to switch out all my SLW’s. I was already spent....I finished up the edit and upload at 3:30am 😬

[@AgentChachi]

Do you think this would survive ripping around a U4 style course? Without a new Yeti around, it’d be sweet to see it as a go fast rig.

[@TheRCNetwork]

I think it can....but we will find out where the weak links are quick (as we always do in U4).

[@joshuagregg1026]

This isn’t designed as a U4 truck. I don’t think those axles will hold up.

[@TheRCNetwork]

Joshua Gregg we will see. Axial also put some seriously fast gear ratios in this....to where crawlers are having to put 1800-2100kv motors in it

[@joshuagregg1026]

The RCNetwork Josh said something very similar. It’s got a lot of wheel speed. It just doesn’t look like they’re quoted suited for the beating that U4 dishes out.

[@TheRCNetwork]

Joshua Gregg most people will use this for crawling....I have more U4 experience, so that’s the route I’m taking initially.

[@duder280z]

I run the same battery, it fits perfect with the tray ratcheted in a few notches. I didn't have to space it all the way out on mine...

[@TheRCNetwork]

Good to know! Thanks for stopping by!

[@craigwiekamp]

Great video. I would run the rc network blue wheels, and I have never run the factory kit tires or wheels for that manner. I order wheels and tires to go with each kit. Guess I'm used to 1/10th buggy racing.

[@TheRCNetwork]

Yep, ironically this build had many 1/10th scale racing traits - like turnbuckle style links.

[@el34superlead]

I'm just up to to installing the dig servo and was looking all over for the bottom part. I wish I knew I needed to buy the spectrum servo to use it.

[@TheRCNetwork]

Someone sourced a $7 part from Axial that would make it work on other servos (the spline adapter). This was never mentioned anywhere....even in the manual, which references a Spektrum model number. Check the FB group - it was posted there

[@el34superlead]

@@TheRCNetwork Thanks, I already ordered the spectrum servo. I just wish they made it more clear, I would have ordered the servo with the kit. Another thing is the shorty Lipo pack. I have 2 shorty packs but they are the kind with the banana plugs that connect to the top of the battery so they don't fit. Also I left out the bottom screw for the pinion gear cover so I don't have to disassemble most of the capra to change a pinion gear... I hope anyway.

[@TheRCNetwork]

Yeah, I'm having flash backs of working on the Bomber/Rock rey already! I think once finding a good set up, taking the cage off won't be needed too often

[@el34superlead]

@@TheRCNetwork The cage isn't too bad but that screw to the pinion cover is behind the suspension link mount. So the only way to get to it is to also remove the transmission. You are right once you have a good setup it should be al set for a while.

[@netcruzer]

Great well detailed build review Rich. Great to point out the manual errors, and needed components. Yes I wish it had hyrax or similar rock tires included, and for your beadlocks I'd choose the proline bronze. :)

[@TheRCNetwork]

Netcruzer RC TECH CARS always cool having you stop by! Overall a great build just a few hiccups, as expected from a first run buggy.

[@cl-audio322]

Can't wait to hear your thoughts on it after you run it!

[@TheRCNetwork]

Me too! Electronics arrive today!

[@blindj]

Just ordered this kit. I don't plan on using the dig and fully locking it out. Are you able to do this with the pieces included in the kit or do you need to get an appropriate sized spacer somewhere?

[@craigwise6]

Great video 👍👍👍. Im looking to buy one. They look awesome. Does the kit version with optional 4WS?

[@TheRCNetwork]

Thanks! This version was the first version and just had regular front axle steering. I believe it can be converted easily...but there is a 4 wheel steer version available as well, but it might only be an RTR version

[@pedrolahoz]

Excellent tips, specially the dig servo bit

[@TheRCNetwork]

Glad to help out!

[@La_motavation]

the build is going good! i just needed a break! no power tools suck haha

[@TheRCNetwork]

Yeah, I used power on the cage. Was like 150 screws 😬

[@La_motavation]

@@TheRCNetwork my wrist is sore after yesterday lol but finaly done im just waiting on electronics

[@brianorion9105]

Question - on page 15 of the instructions it calls for installing a gear number AXI234007 to the steering servo gear. There are two versions of this part, one labeled 23 and the other 25. What’s the difference and which one do we use?

[@TheRCNetwork]

The 23 and 25 refer to the tooth spline of the servo - many servos use 25t, but some still use 23, like Spektrum (Horizon Hobbies/Axial's house brand) Check your servo manufacturer and see which one you need

[@brianorion9105]

@@TheRCNetwork Thanks very much. That makes sense. I really appreciate it!

[@brianonthego]

Thank you for the clear footage and details of the build. I look forward to building a Capra one day.

[@TheRCNetwork]

Glad to help! Happy RCing!

[@pawelnowak5013]

Hey buddy. Any advice on rims that can be used with this build? Seems like diameter is smaller by a pinch so normal bead locks will have a bit of a play. I’m talking about a small piece of half axel between hex nut and thread itself. Try putting those that came with a kit and fit them on your trx for example. Please advise.

[@TheRCNetwork]

Most 1.9" rims (with SLW compatible hubs) will work...you just may need to adjust the SLW hub width to clear the portals. I was able to run 225's (which are the smallest) on mine with VP Method 105's

[@ThisIsDavesGarage]

Is that micro servo for the dig function waterproof? If not, HH is kinda shooting this rig down by making it all waterproof, except for the dig servo...that is proprietary designed to only fit the 1 spektrum servo available for it...

[@TheRCNetwork]

I couldn't find any specs that stated WP on the Spectrum SX107 servo....so, yeah. Since the release of the Capra, there have been other alternatives for micro servos and I even believe a mount for a full size servo.

[@tomandrews5392]

Cant wait ...thanks for the tip on the dig servo I am going to need to order one asap … I don't like taping down my ESC so I hope the RPM cage will help to hold the ESC...Looks good in your Blue with the bronze wheels...The blue Method will be nice also...Thanks again great info...

[@TheRCNetwork]

Thanks for stopping by. Yes, their dog servo is a must for day one. Maybe down the line we can sort out better options

[@jeromebach8448]

Great video 👍 What size of battery can we put? How many teeth does the motor pinion have? Thank you very much

[@TheRCNetwork]

It takes a standard “shorty”pack, or as I listed the ProTek 3s shorty - that’s the largest possible. 14t pinion is the included stock pinion

[@stompindakka3222]

very interesting. to watch was possibly going to buy a 1.9 wraith but i may swith my mind and go capra

[@TheRCNetwork]

This ones more unique IMO

[@spunkysandoval]

I'm not sure about this kit. Great overview! Very comprehensive and well shot. Thanks!

[@TheRCNetwork]

Glad to help. My only main gripe is the dig servo issue

[@RCGirl]

Loved all the details you shared! Can't wait to build mine!! 🤘

[@TheRCNetwork]

RC Girl thanks Haley. Make sure and DL the revised owners manual. They’ve fixed much of what I covered. 😃👍

[@oldgeezer3324]

I placed an order for the Capra and canceled it the next day. After seeing it was designed to use one specific servo for the DG and the servo comes with a special part so it will operate, No Thanks, they can keep it. I have RC's I bought in the 80's that still run (Remember the Grass Hopper?) If I buy an RC, it just doesn't work that it was designed so you absolutely have to obtain a specific part made by a servo company to keep it working. How long will it be before that servo is discontinued, then the owner is up the creek without a paddle.

[@robertturnip7850]

Even if its not discontinued, what if is breaks? Would you need to buy a whole new servo just to get that little plastic part?

[@TheRCNetwork]

Someone sourced a $7 part from Axial that would make it work on other servos (the spline adapter). This was never mentioned anywhere....even in the manual, which references a Spektrum model number.

[@TheRCNetwork]

Someone sourced a $7 part from Axial that would make it work on other servos (the spline adapter). This was never mentioned anywhere....even in the manual, which references a Spektrum model number.

[@stratobungle]

Even if Axial and Spektrum were to go out of business, it can be done...as we now have the ability to 3D-print that part in perpetuity!

[@oldgeezer3324]

@@stratobungle and the license to do so?

[@marccyberwiz]

Sweet build nice work can’t wait to see complete. Might get this soon. I built out my Rock Rey and my TRX 4 which was fun but I’ve been wanting something like Bomber or Wraith just for crawling this looks better. What servo will you use for steering? I already have Mamba X ESC and motor combo for this. I hope 2400Kv sensored does the trick think it’s 3.2mm shaft.

[@TheRCNetwork]

You should be fine on the 2400kv (540 size, I hope) on 3s

[@ianmoughton8370]

Excellent review. I’ve just noticed you have fitted a light bar to your Traxxas trx4 to your scalerfab front bumper. What light bar did you use and how did you fit it please? As I would like to get one for mine please.

[@TheRCNetwork]

It's the 1" Rigid Industries light bar from Vanquish - I just had ton drill 2 holes in the SF bumper top plate

[@mikeinvegas1]

I was into this until u showed your spawn at yhe end.. beautiful. I'll see if u have a video on that?, lol. . Is the spawn much of a crawler?

[@TheRCNetwork]

Yeah, the Spawn is a completely different beast! The Spawn was meant to go fast....but with the lockers it can crawl great

[@kevinklein1806]

Thank you for making this as, I am waiting for the Capra to arrive at my LHS.

[@TheRCNetwork]

Yeah, I wanted to get some info out there. There’s been a ton of questions on FB and hopefully this video helps. Have fun on that build!

[@zzBloodzz]

Did you go to school in Oregon? MBA? Sorry if not same name lol.

[@TheRCNetwork]

Ryan Boucher no, sorry. Went to school in SoCal

[@kevinklein1806]

I want to school in Idaho.

[@Firewlkre]

Great video! I think the machined gears and upgraded shocks were a good trade off for the tires.Like you i can't use those plastic wheels either.I like the bronze colored wheels.

[@TheRCNetwork]

Thanks jo jo. I didn find out later that the portal box gears are sintered gears (pot metal)

[@boldrbangr9834]

Great review; thanks! Love the shock caps with the bleeder hole, as assembling shocks is my very least fav operation. Any idea if these shock caps will retro fit to other aluminum Axial shocks?

[@TheRCNetwork]

Hey Boldr - yes, super easy to build these and get them right. I can’t tell you how many times I flipped the bladder in old axial shocks due to too much oil pressure.

[@michaelhoyle2665]

Thanks for the build vid. I like the blue methods for rims, but it depends on what paint scheme you go with.

[@TheRCNetwork]

I think the methods won....thanks for stopping by!

[@yvandesgagne4967]

Excellent video. 👍 The battery tray is really not wide. Really happy, it did not include tires. 😊 I prefer Pro-Line tires. 👍 Yvan

[@TheRCNetwork]

It's meant for shorty width lipos - which are gaining popularity.

[@rcjoe406]

Just got my kit on the back of the instruction it say updated 10 / 19 any chance they fixed the errors in my book thanks Joe...update watch your vid they fixed the errors cool beans...I like choosing my tires for the look of the rig I bought aluminum beadlock and some rcfwd 1.9 irok

[@TheRCNetwork]

Yeah, I'm sure they updated it....you can always check their website and check any up to the minute updates on their manual

[@ThAsocialypseNow]

Can fit the junfac rsd piggyback 100mm instead the normal shocks?

[@TheRCNetwork]

I'm sure they'll fit - shocks are usually pretty universal, but not sure you'd want to put longer shocks on it though

[@ThAsocialypseNow]

@@TheRCNetwork Thanks for answer .. are only 3mm hole to hole and with a super soft setup i think can be interessant

[@MarcoAurelio-vi2wd]

Can't decide wich beadlock, both beautiful!!!

[@TheRCNetwork]

Thanks Marco! Yeah, it’s a tough one!

[@WasNiksIsNiksWordtNiks]

So the light bar leds are included? My box says that they’re not 🤷🏼‍♂️

[@TheRCNetwork]

The lighter including LED's are included. The cage does have "headlight" buckets and LED's are not included for that

[@joshgraziosi8159]

Commenting half way through... The links are beautiful!!

[@TheRCNetwork]

Yeah, best Axial links ever.

[@medievalpossum6504]

How did your transmission go together? My top shaft is not seating so the case won’t seal

[@TheRCNetwork]

MEDIEVAL POSSUM it took me a few to get everything seated in correctly. The manual was incorrect....put the top shaft through the outside of the case....not the inside like the manual shows

[@medievalpossum6504]

The RCNetwork thanks man. Helped na alot

[@garymurphy5133]

What a great looking model. Can this model be used for "rock racing" style? I live in a city so have more rough flat terrain to use.This is the best looking model I have seen.

[@Pedro123-s6v]

The best review I have seen for a long time !! A like and a new subscriber! 👍 .. I loved the construction notes 👍 ... I was considering buying the rtr since I am in a zen phase .. 😬⌚🛠️ ... But in view of the fact that you have to disassemble half a car to change the engine, I think I'll buy the kit ... What I don't know is whether to leave the Dig without a servo, because in the GOM I have, I hardly ever use it😳 ... And seeing what the owners say about how hard the springs are, I plan to try the gmade transition ... Congratulations on the channel, good job 👏

[@TheRCNetwork]

Glad to help out! The dig is cool, but like you said, I rarely use it

[@Thedudeabides803]

I wish I bought the kit. I just bought a 4ws rtr and a quarter of the screws are stripped. Frustrating that when they assemble these things they strip so many screws. Last time I get an rtr.

[@TheRCNetwork]

Yeah, they likely power drove those things in.

[@dwaynekaye2000]

Depending on colour of your rig. I like the blue rims they kinda pop(stand out) a little more.👍nice rig so far.

[@TheRCNetwork]

I agree 😃

[@levynatan]

Do you only build and show your cars? all are new never run or please how do you clean them ?

[@TheRCNetwork]

When I started my channel, my goal was to help people that bought these RC's. Although I do run my cars, I keep them very clean and maintained....but as you can imagine, with so many RC's, it's hard to drive them all as if I only had one. I much more enjoy making videos that show someone how to do something vs. just how it drives

[@levynatan]

@@TheRCNetwork Thak you for your videos very helpfull also for answer

[@Waltkat]

Thanks for your very thorough build review and especially the warning about SPMSSX107. Luckily I have a 3D printer so I can make this part to fit any servo I chose. Take that Horizon! And this is coming from a former Horizon products dealer, lol. For the price, I think this should have come with tires. I'll bet leaving them out was a Horizon idea to milk more money out of people. I'm beginning to think the Traxxas TRX-4 sport kit is a much better value (US$50 cheaper and includes tires!). Heck, the TRX-4 chassis kit (includes tires and all of the electronics) is a much better value, even though it costs US$40 more than the Capra.

[@TheRCNetwork]

Yeah, I'm sure there was a some serious pricing talk about the Capra. Just from building this and comparing it to my TRX-4 - they're two totally different beasts

[@CORINKERSTEN]

Did yours come with a spring for the dig servo saver, because i couldn't find mine or maybe it didn't have one.. Great video mate!!!! i had to use the plastic wheels because mine was for a product video ;(

[@TheRCNetwork]

Yep, no issues there. My only flub was the 12mm hex pin not being threaded.

[@mondospeedy3089]

Yes most definitely tires should be included, along with the dig servo.

[@TheRCNetwork]

I personally agree with you!

[@davidaarons2488]

Reminds me of the Twin Hammers it too came with Losi bits. I like the blue ones but I would get some bead locks on Amazon ($40) and they are just as nice and very good quality, but that's just me. so far looks nice. Hope the quality is better that the Wraith Spawn that I built (was a bit sloppy in the fitment area). God Bless Ya Dave

[@TheRCNetwork]

I agree on the wraith...especially if you ever ran brushless.

[@trentgalloway]

Blue methods! Great overview as always!

[@TheRCNetwork]

Thanks Trent! Yes, the Blue Methods won....I painted the panels this weekend

[@jasonshawaga3413]

Wonder if a roc412HD will fit in there

[@TheRCNetwork]

Jeff Shawaga it won’t. Only 540 sized - like the Roc412

[@SoleEpiphany]

Bronze for sure, that is awesome looking, goes with the shock bodies kind of nice too.

[@stratobungle]

The bronze appeal to me, too - but I'd never pay my own money for them, they are VERY pricey comparatively-speaking ($87.96 a PAIR, w/out hex adapters!) - even more than Vanquish...

[@jsmith-rn4tp]

If I choose to have full time 4wd with spacer, do I need to install a shifting servo?

[@TheRCNetwork]

Nope. The spacer keeps the arm all the way to the full time 4wd side.

[@Zachcamaj]

Where does the dig servo plug in on the receiver?

[@TheRCNetwork]

Any open port that's programmable with your 3 channel radio system

[@renobob7781]

Morning Rich, I prefer to get my own tires. The bronze wheels look nice, but the blue ones might match the blue in the included decals if you're going to use them. Sucks about the dig servo I think there's better ones out there. Your Trx4 needs to be driven. Later 🤠🇺🇸☝️

[@TheRCNetwork]

Good eye on the decals...not sure of the decals will make it on my rig....I like to be different than box art....we will see

[@braddahdussifyoumuss596]

You’re awesome dude keep it up 400!🤙🏽

[@TheRCNetwork]

I saw that last night when you commented! Thanks for the 400th 👍

[@jkmayhem]

My scx102 kit did not have rims or tires included.

[@TheRCNetwork]

You mean the raw builders kit?

[@jkmayhem]

@@TheRCNetwork Indeed.

[@RevolutionX]

Nice job Rich! Maybe one day I'll meet you crawling out at cdm.

[@TheRCNetwork]

Thanks Rev! Yeah, I need to hit CDM - haven’t been there in a while

[@strykerll562]

im a method wheel man for sure but the bronze looks goods also but i would go with blue method wheels

[@TheRCNetwork]

They one....I painted the panels this weekend

[@odomandr]

Xr10 have tires?

[@hoodratrc]

The scx10.2 builders kit didn't come with wheels or tires

[@TheRCNetwork]

Nailed it! I was thinking back to the actual “kit” versions, like Bomber, Yeti, Wraith Spawn, SCX10ii, etc

[@davidspinney7344]

And really the majority of axials kit tires arent worth mentioning. I have pikes of them still unused lol

[@TheRCNetwork]

I did like the Yeti Kit tires....they did well, but not better than Hyrax's

[@johngarry7098]

The axial xr10 did not come with tires as well.

[@TheRCNetwork]

That's going way back!😃

[@NikkiNexo777]

I'm glad it doesn't come with tires so I can choose my own. Kit tires usually suck anyway. As far as wheel Choice, you're probably going to paint the panels blue, so go with the blue Methods, although personally, I do like the bronze Wheels better.

[@TheRCNetwork]

Yeah, the bronze is speaking to me....thanks for watching!

[@danielkonrad1444]

Take the blue wheels. They Look awesome.

[@TheRCNetwork]

They one....I painted the panels this weekend

[@hortonsweeping]

I really have missed you 👍🏻

[@TheRCNetwork]

Thanks Horton....always cool to see long time subscribers in the comments!

[@Warwick3511]

A new manual is now out fixing the errors and not clear sections

[@TheRCNetwork]

Warwick Campbell yep, I saw that. I’m glad they fixed it...especially for the newer hobbyists

[@frankiedelaparra9530]

Now I really might have to head to the LHS and pick one up! Go broonnnzzzee....

[@TheRCNetwork]

It’s worth it. Thanks for stopping by!

[@skipro3]

So what ESC and motor did you end up using? I watched the whole video to get that info, then you got all secret about it.

[@TheRCNetwork]

The following video shows everything that went into the build - electronics, tires, paint, etc

[@skipro3]

@@TheRCNetwork What following video? Was your reply supposed to contain a link perhaps?

[@skipro3]

@@TheRCNetwork What following video are you referring to?

[@TheRCNetwork]

skipro3 my channel has that handy “search” button. Simply type in “Capra” and every video pertaining will pop up. But I’ll help you out: kzbin.info/www/bejne/jJq6lqOpd86ei7c

[@nj2033]

Great video! Thank you so much!

[@TheRCNetwork]

Glad to help!

[@krashkingrc9715]

Nice video excellent job I don’t like the fact they show the tires and wheels but not in the kit. Normally add my own tires and wheels but kinda deceiving

[@TheRCNetwork]

Yeah, the standard has been to include tires with scaler/crawler kits in the past.....but I'm like you, I probably wouldn't have run the stockers

[@joebltz]

The axial xr10 kit did not come with tires.

[@TheRCNetwork]

Dang, that goes way back!

[@stpbasss3773]

I sold all my RCs a couple months ago and I'm glad I did lol, now I have money lmao.

[@TheRCNetwork]

Amen to that! However, you’re still watching RC videos.....”the addiction is strong with this one” 😃👍

[@stpbasss3773]

@@TheRCNetwork no I actually don't anymore I clicked on this to see what it was and I didn't watch lol. I didn't unsub to anyone because I like you guys but I don't watch or do anything RC related anymore, the hobby was way too expensive for me lol. I just sold my last RC the other day, my little scx24 it was my last one 😥. I've had a trx4 sport, two scx10ii, 1/10 yeti, redcat gen 8 and Everest 10, a slash, rustler 4x4, 2 losi tenacity, an arrma senton 3s and granite, 2 ecx barrages and my little scx24. I still support the RC guys I just can't buy them anymore lol I was addicted 😂.

[@powcar91]

@@stpbasss3773 I had 15 rcs at one point in time.

[@TheRCNetwork]

Pancouver venguins I hear ya....beginning of last year, I had over 70....it was just ridiculous. There was cars I didn’t know I had. I cut it down to about 15 by mid year, and now, I only have about 10. I sometimes don’t even touch them for 2-3 months, but Instill get the itch....and I like to think it’s better than just watching Netflix or something. We will always be there if you decide to head back.

[@stpbasss3773]

@@TheRCNetwork I feel ya, I skateboard a lot so I can get out of the house on my days off and hang out with everyone. I only had one friend who did RCs so I never had anyone to drive with lol. I wouldn't mind having a crawler again but I'd have to keep myself from buying tons of stuff for it 😂.

[@RCsRCCars]

This video made me not want to buy the Capra until there’s a servo alternative. Why didn’t they just include the servo in the kit?

[@TheRCNetwork]

Someone sourced a $7 part from Axial that would make it work on other servos (the spline adapter). This was never mentioned anywhere....even in the manual, which references a Spektrum model number.

[@RCsRCCars]

Would you happen to know the part number? I know the Spektrum SX107 servo is only $15 but it’s just annoying why they don’t just include the servo or the adapter in the kit. Besides greed of course.

[@TheRCNetwork]

RC's RC Cars I haven’t verified, but here’s the part that was mentioned on The Capra group on Facebook: www.axialracing.com/products/ax31009

[@Boss-dr2zk]

I love bronze wheels!

[@powcar91]

It doesn't need tires included, I would chose the blue. Since you like blue a lot.

[@TheRCNetwork]

Thanks PC - always cool to see you in the comments! Blue always wins for some reason.

[@savagess69turbo79]

Use reverse rotation motor?

[@TheRCNetwork]

Gosh, totally lost track if I did or not...I had some issues calibrating the RX4, which was my fault 😬

[@kjhan4428]

What size motor do you use? 550 /540

[@TheRCNetwork]

The Capra will only fit a 540 or smaller length motor

[@M3ak22]

looks great! Awesome video!

[@TheRCNetwork]

Thanks Buddy!

[@charliebrown238]

Great video cheers! Also, I think you set the new world record for how many times you can say the word "Capra" in 17 mins! Capra word count = 37 Times HaHa!

[@TheRCNetwork]

I was trying for 50....

[@rubiken06]

I'd go with the blue methods.

[@TheRCNetwork]

Thanks Ken, the methods are always a favorite.

[@operation11charlieinc]

Awesome job brother like Always 🙏👍🤙✌

[@TheRCNetwork]

Thanks Charlie for stopping by this Saturday morning!

[@operation11charlieinc]

@@TheRCNetwork Always brother

[@robbryan3044]

First, regarding the translation, yes, "capra" translates to "goat" (in quite a few languages - Basque, Catalan, Corsican, Galician, Haitian, Italian, Latin & Romanian) ...but there were two laanguages which 'threw me for a loop', so to speak. In Urdu, the word translates to "clothes", and in Bangla, it translates to "in clothes". Anyway, enough 'absurd trivia'. Before I continue, I have a question - What is the maximum length allowed for a motor (since not all 540 cans are the same length...and maybe, just maybe, there's enough room for a 550)? That having been said, Axial's "integration" into the Horizon Hobby family is quite pronounced. Axial 'claims' the Capra is a "completely new, from the ground up, vehicle", but this is NOT the truth (although, in regards to what the truth is, Axial's 'claim" is not a bad thing). For example, Axial part AXI232009 is, in reality, Losi part LOS232009 (notice the only difference in the part numbers is the 'AXI' vs 'LOS'). Another example would be AXI235014, which is actually TLR235014 (for those unfamiliar, TLR is the racing side of Losi, ie. Team Losi Racing, both of which are owned by Horizon Hobby). Another would be AXI237009, which is actually VTR237009 (Vaterra is another Horizon Hobby-owned company). If those reading this are starting to get the picture that Axial "created" a considerable portion of the Capra by utilizing parts already in existence from other Horizon Hobby-owned companies, you will have hit the nail "smack-dab in the middle of the head". Again, this is NOT a bad thing, as Losi/TLR is very-well known for producing incredibly high-quality parts & kits. Axial has already stated that many of the parts are made in the Losi factory, so we shouldn't be surprised that many of the Capra's parts are Losi/TLR parts. Heck, Traxxas has been doing this for years, and with great success. Regarding build tips, such as building & filling the shocks (I usually fill to 3/4 before working out air bubbles), there are countless videos on KZbin...quite a few of them from RCN. The manual is typical TLR, meaning it's well-written, well-illustrated, well-organized...and, with a few minor "errors" (such as an incorrect screw length being mentioned). I can say that, when I was looking to get a 1/10 2WD buggy, I narrowed down my choices to four possibilities, and, after comparing the build manuals, the Losi/TLR manual was, by far, the best. As such, with Axial now a fully-integrated part of the Horizon Hobby family, Axial's build manuals (from this point, forward) are also bound to be great. Lastly, regarding the DIG piece that's included with the SX107, it actually looks like a piece from another kit's servo-saver...although I can't figure out which kit is. Now, if only UPS would deliver my Capra. I just checked the tracking, and it shows (as of 5:43am this morning), "Loaded on Delivery Vehicle"...but not "Out For Delivery" :-(

[@stratobungle]

a Horizon Hobby Product Developer was quoted as saying a 550 will not fit without modification - he included a pic and you could see that even a 540 is somewhat shoehorned in there - the motor ends up very close to the link mounts. BTW, this thing only weighs 4.0lbs w/out electronics, so a 550 isn't needed to make it flat scoot...

[@robbryan3044]

@@stratobungle Thank you for the info. I'm sure others considering (or having already ordered) the Capra will also appreciate the info. Anyway, I've already eliminated the idea of a 550. At this point, I'm just trying to decide between a ROC412, HH PP Standard, or HH PP Stubby. While you say even a 540 "comes close', that would depend on the 540, as not all 540s are the same length. For example, the ROC412 is 52.5mm, the Puller Pro is 53mm, and the PP stubby is 44mm. In comparison, a Hobbywing AXE is 48.8mm, and a CC Slate is 49.5mm. Between the shortest, and longest, that's a variance of 9mm (interestingly, the two HH motors are both the shortest, and the longest). When dealing with vehicles with a very small motor and/or ESC space, this is an excellent reason why manufacturers should provide "maximum sizing" info. If the ESC tray can only hold an ESC up to a certain length and/or width, they need to disclose this. Likewise, if only motors up to a certain length can be used, they need to disclose this.

[@stratobungle]

@@robbryan3044 Jumpin' Jiminy Cricket...that was kinda long-winded. Yeah, I've seen many a subtle variation in can sizes. IIRC, the motor in the pic I am referring to was a Tekin ROC412. Personally, I think a CC Mamba Micro X Crawler Ed. and a Stubby PP 2700 would be the perfect combo for the little "cabrito"... But your personal pref. may vary. Enjoy!

[@robbryan3044]

@@stratobungle The Mamba Micro X would be good, except for two "problems". First, its BEC is only 2A, whereas the Mamba X has an 8A BEC. Second, if using a digital and/or high torque/speed servo, you need to install an external BEC. Honestly, I was starting to consider the micro X...but, them I thought about the vehicle weight. The Capra is 4lbs w/o tires or electronics. Once tires & electronics are factored in, it's now closer to 5-6lbs...possibility even 7lbs. If a person is only going to use the Capra for rock/trail crawling, then the micro X will serve perfectly well. Since I plan do do a bit of rock racing with mine, I'm not certain the micro X would work, thus I'm back to the "standard" X.

[@stratobungle]

@@robbryan3044 HH SHV500 servo is the answer, no BEC required - tap into main LiPo for full 3S power - works great in my Bomber. BTW - it's awfully small to run in U4, and only time will tell as to how it holds up to impacts at speed with those plastic portal housings - new and improved TLR plastics or not. IMHO, the Capra is first and foremost a crawler - especially with its included dig function. However, that's just my opinion of course! Enjoy it, however you want to ;)

[@fernsolo]

I don't think tires are necessary, for the most part people already have their favorite brand, also the Axial raw builders kit didn't come with tires.

[@TheRCNetwork]

Fern Solo I agree - I have a couple of favorites...RBK - I knew there was at least one.

[@duder280z]

They were correct to not include tires on this one.

[@HL-OOI]

Surprisingly you didn’t do a review on ELEMENT RC KIT..😁

[@TheRCNetwork]

No surprise there... 😳

[@ronnieterryjr4485]

Go with the blue ones i thank they look better

[@TheRCNetwork]

They one....I painted the panels this weekend

[@richardfazio2417]

Xr10 didn't come with tires,n it also had metal link balls.

[@TheRCNetwork]

you're going way back! Thanks for stopping by!

[@rcsnapon2132]

Awesome channel and cool video i also subscribed

[@TheRCNetwork]

Thanks RCSnapOn! Glad to have you aboard!

[@rcsnapon2132]

Anytime brotha thanks

[@jessie38supercharged]

if they came with proline hyrax predators and the micro servo horn part they could have sold it for $399

[@TheRCNetwork]

I get that they were trying to hit a pricepoint....but the dig servo issue and tires were a negative in my book

[@rcclover6434]

name song?