Build Series 4: Mobile MFT Cart Build: EP 6

  Рет қаралды 15,039

Festool USA

Festool USA

Күн бұрын

Пікірлер: 29
@mobilow
@mobilow Жыл бұрын
super clear set of videos, fun watching it !
@frankginocchi1044
@frankginocchi1044 3 жыл бұрын
Nice project Brent and well done. Great use and explanation of all the Festool products as well.
@festoolusa
@festoolusa 3 жыл бұрын
Thanks 👍 Brent
@ronh9384
@ronh9384 3 жыл бұрын
I enjoyed this video build series as well, and the others also. More please. Nicely done and I learned more about some of the tools. Thank you. Ron
@WelshRabbit
@WelshRabbit 3 жыл бұрын
Thanks, Brent. Excellent! Please do more -- MANY MORE. Your build series is both enjoyable and educational.
@jamescermak3630
@jamescermak3630 3 жыл бұрын
Thanks Brent, awesome build, that was a great demonstration of how everything with Festool works together as a system. Keep the videos coming.
@festoolusa
@festoolusa 3 жыл бұрын
Thanks, will do! Brent
@BenMarshallDesigns
@BenMarshallDesigns 3 жыл бұрын
Great series, Brent!
@festoolusa
@festoolusa 3 жыл бұрын
Thanks, Ben!
@AngieWilliamsDesigns
@AngieWilliamsDesigns 8 ай бұрын
I definitely learned a lot with this. And I’m sure I will even more when I build one. I don’t have a sys vac. So I’m not sure if I need that side assembly. But… I also don’t want to redesign it. LOL. Maybe I’ll add something else there. What is that tool called that you used on the 1010 to clean up the edge banding? I love that!!!! And will it work with the OF1400? Also love the sanding guide for the edges.
@Wood_Slice
@Wood_Slice 3 жыл бұрын
Loving the inspiration from Timothy Wilmots about the mortises for vertical holding. I also built myself a slightly different MFT cart but the overall idea is same.
@chrisr8996
@chrisr8996 3 жыл бұрын
This! 8 years down the line and it's still one of the most inspirational designs for workshop cabinetry and carts ever. Credit where credit is due!
@dennismacwilliams196
@dennismacwilliams196 Жыл бұрын
What A great idea of a work center...
@adrianhelwig
@adrianhelwig 2 жыл бұрын
Thanks Brent! very nice series. Question: could You still fit the clamp (either fast fix or standard) under the table to clamp from below? Thanks
@johnmccracken6497
@johnmccracken6497 2 жыл бұрын
I really learned from that. Thanks.
@jasonm.7358
@jasonm.7358 3 жыл бұрын
Love the project, love the videos, love the plans… buuuut y’all might want to fix the typos at the top of page 03 (5th page of the PDF). Demnsions and cultist?
@bigmonkey999888
@bigmonkey999888 3 жыл бұрын
Hi Brent, great video series! Intrigued by your cut list software, what is the design and cut list programme called please? Steve
@festoolusa
@festoolusa 3 жыл бұрын
Hi Steve, The design software is Skethup Pro and the cut list software is Cut List Plus FX Brent
@Barakabkk
@Barakabkk 3 жыл бұрын
This is one of the project I would like to do + table for TKS-80, and Festool Router table.
@peacekeeper5119
@peacekeeper5119 3 жыл бұрын
Be aware, the Festool Rails are only available in US/CAN . So when you try to rebuild it in EU, you need to buy them in US
@jtlong8383
@jtlong8383 3 жыл бұрын
Brent, when you were cutting on the Kapex, you were using imperial measurements, yet the rest of your build was in metric. Just wondering why your Kapex fences are not metric too? Great series, by the way!
@festoolusa
@festoolusa 3 жыл бұрын
JT, Good catch. No excuses here. I just grabbed the wrong extensions from the shop that day. I typically only work in Metric. Brent
@MichelBreure
@MichelBreure 2 жыл бұрын
Hoi Brent, do you have a making list of this project Mobile MFT Cart?
@microdoulo2250
@microdoulo2250 11 ай бұрын
what is the high caster wheel?
@dsdragoon
@dsdragoon 3 жыл бұрын
Very nice MFT Cart Build. Wish I had that nice set of Festool tools you use about $15K worth.
@witox4
@witox4 3 жыл бұрын
What model or make of wheels you used?
@jwar2163
@jwar2163 3 жыл бұрын
What is the possibility of joining two of these carts together? What if you have more than one mft and you want to lock them together for larger builds?
@ronh9384
@ronh9384 3 жыл бұрын
Yes you could make it using two MFT tables. But on at least one maybe add some leveling feet in case your floor surface isn’t perfectly level. The link below is to Jason Bent’s KZbin channel and I believe he has three Mft tables on his MFT cart/assembly table. kzbin.info/www/bejne/pnqtcqGIqqt-qtU
Build Series 4: Mobile MFT Cart Build: EP 5
15:12
Festool USA
Рет қаралды 12 М.
Most expensive assembly table
16:34
Bent's Woodworking
Рет қаралды 133 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
chế dụng cụ tiện puly tròn siêu dễ
8:07
khám phá và sáng tạo
Рет қаралды 7 М.
This is the way to store Festool Systainers!
7:07
fultonfinewoodworks
Рет қаралды 25 М.
Build Series 5: Doors & Drawers: EP1
6:05
Festool USA
Рет қаралды 14 М.
Festool FEST!!!  - Systainer3 S76 TRA - Episode 1
9:32
OnoTech
Рет қаралды 499
I Make an MFT top with the LR32 rail [video 424][gifted/ad**]
13:05
Peter Millard
Рет қаралды 184 М.
Build Series 5: Doors & Drawers: EP 6
8:02
Festool USA
Рет қаралды 8 М.
Build Series 6: Bedside Table: EP1
5:59
Festool USA
Рет қаралды 24 М.
Mobile Tool Cart/Assembly Table With Torsion Box Top
16:07
Guys Shop
Рет қаралды 100 М.