Build this guitar stand for under $5 !!!

Have you ever wanted to build a guitar stand but didn't know how?
That's because you don't know Dick!
Watch this instructional video as Dick explains the process of how to build a collapsible guitar stand for less than $5!
Music by: DJ (Dick) Warkentin

[@johnsanchez5204]

Nice Guitar-Stand. But, Still, All your tools and What have yous is more than $5.

[@srt8speed]

Nice stand Dick! Simple easy to follow instructions..What’s not to love?? Need a bunch of these so I can photograph an extensive collection of about 60-70 guitars.. Best get busy.. Thank you!! Say goodnight Dick 😅

[@davidburr9316]

I built one. It cost me about $8:50 Aussie - it's perfect. Thank you Dick.

[@djsjukebox8711]

You’re most certainly welcome David! :)

[@tonycordell9205]

This is just awesome, so simple, fun and easy to make....directions were well thought out and planed....made two in one afternoon for gifts thanks so much for sharing. As a note, I used pocket holes to connect the back brace and foot...seems to work well...(I did put wood plugs in to cover the holes made by the jig)

[@jetronator]

$5... First I have to buy all the tools you used :D $5000

[@bobbuilder1499]

@Jetronaattori IDIOT..............................IDIOT.........!!!!!!

[@Its_REDD]

If you are going be like that, then just buy cheap tools, go to a hardware store and buy a cheap handsaw and a $20 drill, you can get the same results.

[@jetronator]

If I'm gonna buy 4500 € tools, why would I buy $25 tools?

[@willw5662]

At 9:20 minute mark, when it collapses.the wood isn't touching flat, likely because of the hinge. Maybe a felt in between would give it a together collapsed feel.

[@robford3211]

But the tools will cost me 1500 dollars!

[@fabiov973]

Hi Dick, nice work!! May i ask you the width of the initial piece of wood? Is the thickness 1 + 1/6" (or 3 cm)? Thanks and again great job!

[@RKK108]

Many thanks! Very good instruction video!

[@joekagerer]

Not only don't I know Dick, but I don't have a scrap of 1x6, and compound miter saw or a biscuit joiner... I guess I'm SOL...

[@rafaguilarsol101]

Best DIY Guitar Stand I've ever seen! Thank you.

[@eltole4766]

Totally love it!

[@amyholderness8142]

Great teaching. Will get on this project this weekend.

[@homemademusiccanada8842]

Let me know how it goes.:)

[@leftypenny1258]

Good Video. Well done. Already planning to make a few!

[@janetwarkentin-bosse3409]

This is awesome!!!

[@jornellthomas5082]

Great job with the instructions

[@skibitzky]

Great video Dick. I would love to make a stand like this for under $5 but I don't have a compound mitre saw. Any hints or tricks on how best to do this with a hand saw or jig saw? Also, I would like to make this stand to put my Larrivée acoustic on, but it has proven to be prone to cracking in situations with variable humidity, so I actually hesitate to display it on a stand like this. Would you have any tips in such a situation?

[@bobbuilder1499]

@Clinton Skibitzky Dont put it on a stand like this ! Use one more suitable to your Larrivée acoustic AS SIMPLE AS THAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@glendoggett9670]

I have seen a similar stand that has one step on the bottom support to hold a thinner solid body electric guitar, and the full width stop holds a thicker full sized acoustic.

[@glendoggett9670]

PS, nice to meet you. Now I do know Dick! :-)

[@owenchipcompany3486]

Great Video!! Thanks

[@Vanillablooos]

I'll be making one of these for my Martin Road Series. Great video!

[@adkinsmikkelsen4980]

Make it wooden with the help of the Woodglut instructions.

[@ojie285]

Big Thanks, from the UK!

[@tomjonezin8295]

Great video.

[@roqueligorria7048]

Megusta mucho la simpleza, de Argentina saludos.

[@MarkFromTaiwan]

nice done and looks ok for cello

[@jeffwickermusic134]

That is so cool! 😎👍🎸

[@hallofshame6112]

Hahaa

[@onlineshoppingstore1736]

Nice

[@jeffwickermusic134]

😎👍🎸