Good, straightforward video - thank you for making it (all your vids too!). I love the Velcro as tape - ingenious!
@sengsational Жыл бұрын
Thanks for the tip that "K Type" meant "Kenwood Type" at dinner the other day. I took the radio-side of the SCU-42 adapter that came with the Yaeso radio and paired it with a torn-apart CT-44 (which wasn't the right adapter), and made a Frankensteinish adapter that allows the aviation radio to work with the MicroAvionics PM-100.
@AveryFlies Жыл бұрын
Very cool, glad you got it working!
@ParamotorNC Жыл бұрын
Nice build. It is pretty easy to pull off those gel cups and route the wire behind (just need a small channel with Dremel).
@AveryFlies Жыл бұрын
I know, and I'm sure a lot do, but it's never bothered me 🤷
@lobbyrobby Жыл бұрын
Simple and straight forward. Thanks
@flierbill Жыл бұрын
Okay! Time to build my second helmet. Thanks for the tips.
@ParamotorJunkie Жыл бұрын
Finally, this is the video I have been looking for
@AveryFlies Жыл бұрын
Happy to help
@ParamotorJunkie Жыл бұрын
Did you hook up the push to talk button ?
@AveryFlies Жыл бұрын
@@ParamotorJunkie I built several of these helmets for use as student loaners, so I did not install the ptt button for simplicity's sake. But they do work fine with the ptt button if you want to use it on your build. I would plug it in and run it down a sleeve to your hand so you can press it while flying
@ParamotorJunkie Жыл бұрын
@@AveryFlies gotcha thanks man !!!
@lawrencebeckner1097 Жыл бұрын
@@AveryFlies PTT button on the side of the helmet works fine too.
@redconfetti Жыл бұрын
I ordered the screw hardware kit you suggested, and it came with the nuts and washers needed, but the bolts were only 20mm long, not 25mm or more.
@AveryFlies Жыл бұрын
Sorry to hear that, this video is pretty old, the item listing might have changed by now.
@redconfetti Жыл бұрын
I’ll see if I can find a new link. Might be nice to add locktite to your shopping list also. I’ll get back to you
@mochamon Жыл бұрын
Nice vid! Is this the same setup you use to communicate with aircraft?
@AveryFlies Жыл бұрын
This is a super simple helmet, mostly for paramotor school and talking with other paramotors. If you wanted aircraft to hear you, you'd want an aviation band radio. (AM, not FM) but with adapters this could hook up to one of those as well
@AveryFlies Жыл бұрын
Here's a video I did with parts needed to integrate an aviation band and 2-way FM radio into your helmet: kzbin.info/www/bejne/mp2Vgn2pltKhbbM
@mochamon Жыл бұрын
Thank you! I have heard you communicating with aircraft in your videos. I have been trying but there is too much noise interference on my current setup. I will watch your other video as well. Thanks again.
@futurecaptain84035 ай бұрын
How to make the aviation radio work with this?
@AveryFlies4 ай бұрын
The cheapest way would be a second wired headset specifically for that radio type. The more expensive way would be a Bluetooth system
@raymondbrammer1072 Жыл бұрын
Good video.
@mikes6216 Жыл бұрын
Do you need the earcups at all? You said -31dB. I found some article saying the "Dobuds ONE" are great, under $50 and they claim -30dB active noise cancelling. Why use the cups at all?
@AveryFlies Жыл бұрын
I guess you don't, earplugs or quality noise canceling headphones can also be effective. The ear cups do double as a side-of-the-face protection and keep my ears warm in colder conditions though!
@AveryFlies Жыл бұрын
In the air, the higher powered UV 8 series doesn't get you any more range than the uv5. And technically I believe you need a ham radio license for the high-powered stuff. It was just a cost-saving measure because I didn't need the extra wattage. Also, I picked mine up on Amazon. If you're not keen to wait the uv5 was about $25 if I remembered correctly
@AveryFlies Жыл бұрын
So once you have no obstructions, according to my ham radio friend, 1 watt will reach to the horizon. If you're talking from the ground, more power will get more range around obstructions, but there are none in the sky. Antenna and power upgrades might help with low flying, but at that point I've never needed more power with the UV-5rs I use. If you want the latest and greatest though, that uv-82 definitely is an upgrade. Also, the UV82 is an FM 2-way radio. Aircraft radios are AM. This will not talk to air traffic control towers. I think you can dive into the programming and listen to am though, not sure, I'm no radio pro. You need a dedicated airband radio to talk back though, something like an Icom IC-A16.
@AveryFlies Жыл бұрын
Not sure on how to add a mic to earbuds. That's why the sena setup rocks, it comes with the mic and everything as it's meant to mount to a motorcycle helmet. I've asked my ham radio friend to check it out, but I can't confirm or deny that your radio in question does airband, which is VHF AM 108-137 mHz.
@AveryFlies Жыл бұрын
Actually, just looking at the radio you mentioned, it can receive AM VHF, but it does not list transmitting capabilities on AM. You'll need both to talk to towers and airplanes, not just listen.
@taylorgardarian Жыл бұрын
I think the funny parts of your videos are great. But not to say that you're videos are a joke, it was a cool build. I once tried to add a mic and headphones, I couldn't hear anything and there was no one to talk to anyway. I might attempt again if I get access to the Eagle County Regional Airport
@AveryFlies Жыл бұрын
Gotta keep it light!
@pittsjohn57 Жыл бұрын
I’m pretty sure that any pilot can use the radio without a license.
@AveryFlies Жыл бұрын
Airband (AM aircraft radios) yes, but as it's explained to me the baofeng FM 2-way radio has 3 caveats: too high transmission power, removable antenna, and precision tunable frequencies. A license is only needed to transmit though, you can use it to receive legally with no license. FRS or GMRS licences are needed depending on frequencies.
@rule1dontgosplat Жыл бұрын
baofeng uc-5r doesn’t transmit on the aviation band. If you’re using the amateur radio frequencies you need a technician license or better… anyone can use FRS but if you’re on the GMRS frequencies you have to pass a test as well.
@lunatech9516 Жыл бұрын
@@rule1dontgosplat you don't have to pass a test for GMRS, just buy the license for $35 (that what it cost when I got mine). I also hold a general ham license btw.
@rule1dontgosplat Жыл бұрын
@@lunatech9516 Oh nice... I knew there was something about the GMRS license. I remember having one of those little family walkie talkies years ago. They said if you used the lower half of the channels, that was FRS and it was available to anyone, but to use the upper half, it used more power and you needed a license. I didn't know you just paid a fee. Interesting.
@jkgoet01 Жыл бұрын
"mounting the muff is pretty easy" 🤣🤣🤣 you have been labeled not safe for work... I never grew up
@AveryFlies Жыл бұрын
Oh my gosh 😅😅
@elp7526 Жыл бұрын
Just built it! Came out just amazing. I did use M8 flanged stainless bolts and I think that made the earmuffs extra nice and solid. you can check out my build here: kzbin.info/www/bejne/j4bSpmmtlsSmqqssi=OXzSWFggt4Uzf2-h