Build Your Own 4x3 Residential Chain Link Gate: A Complete DIY Installation Guide!

Join us as we demonstrate how to assemble a 4x3 residential chain link gate from a comprehensive gate kit. Perfect for DIY enthusiasts and homeowners looking to enhance their property's security and aesthetic. Please visit our website to get more information: wholesalevinyl...
This tutorial covers everything from the initial setup of uprights to the final adjustments ensuring a perfectly square gate. Follow our step-by-step instructions for a flawless installation.
We are showing you how to assemble a 4x3 residential gate kit. This gate kit is for a 4' chain link fence, they come in custom heights and widths. We use 1 3/8" .065 Pipe, it's much heavier than standard tubing. If you are a contractor or DIY looking for a heavy duty gate without welding skills, then you will love this. This framework idea came from our heavy vinyl gates.
We also offer a 1 5/8" frame for commercial use. Check out our other videos. @ / vinylwholesale
For questions on pricing please call 877-573-5561 Mon-Fri 8am-5pm MST
If you place a vinyl order or know of someone that's in the market, pass this discount code along. Use "10OFF" at checkout. @wholesalevinyl...
If Your in Pocatello Come say Hi @Buetts Fence In Pocatello
Do you want to Know About US?
We are known as Buetts, a family last name from my father. My Dad was a simple farm boy; he grew up mending fences and attending cattle after school and on weekends. My father grew up very poor; his parents lived through the Depression. They lived off the Land in Arkansas by farming and livestock. This is where he picked up fencing; he would do side jobs mending fences for farmers.
My father's first job was with Marshall Fence Company out of Marshall, Texas. He was trained by Joe Pepper and his father (who Dad still calls Dad and Grandpa on occasion). (Side rant: I remember building cedar fences by hand, no power tools; according to the Peppers, it was against the art.)
Dad took over Marshall Fence and ran it until 1996 when he packed us up and moved to Idaho. Buetts started in August 1996, consisting of my father, two brothers, uncle, cousins, and lots of other great hands.
@WholesaleVinylFencing started in 2010 and is operated by us with the addition of 42 distribution facilities nationwide. Those facilities store chain links, iron, and vinyl. 90% of those facilities is equipped with a vinyl router, which means fast turnarounds on vinyl materials and CHEAP PRICES on commercial grade material.
"Commercial Grade Material At Residential Prices"
This video is about Build Your Own 4x3 Residential Chain Link Gate: A Complete DIY Installation Guide. But It also covers the following topics:
Easy Fence Gate Setup
Custom Chain Link Gates
Fence Gate Installation
Video Title: Build Your Own 4x3 Residential Chain Link Gate: A Complete DIY Installation Guide!
🔔Ready to upgrade your yard? Hit subscribe for the best in vinyl fencing guides, how-to videos, and jaw-dropping savings with Wholesale Vinyl Fencing.
/ @wholesalevinylfencing
🔗Stay Connected With Us.
👉Facebook: / wholesalevinylfencing
👉Instagram: www.instagram....
👉LinkedIn: / wholesale-vinyl-fencing
👉Tiktok: / wholesalefencing.com
👉Website (Wholesale vinyl fencing): wholesalevinyl...
👉Website (Wholesale fencing): wholesalefenci...
✅ For Business Inquiries: [e-mail]
☎️ Leave us a call at 877-573-5561
================
✅ Other Videos You Might Be Interested In Watching:
👉 DIY Vinyl Fence Installation - Step-by-Step Tutorial for Beginners
• DIY Vinyl Fence Instal...
==================
✅ About Wholesale Vinyl Fencing.
Wholesale Vinyl Fencing
The fences you see lined up in front of your neighborhood Home Center serve a purpose-low price.
Wholesale Vinyl Fencing is designed, manufactured, and engineered to be one of the best values in fencing today. Our post measures .165 thick and comprises rigid polyvinyl chloride (PVC). Its UV inhibitors and additives make it impervious to the elements yet flexible enough to resist cracking.
Save Big!
Explore all your options to save on your new vinyl fence. Look through our selection of wholesale vinyl fencing to see that we have the best bargains. You can browse our vinyl and rail vinyl fencing to find the best option. We excel in providing superior-quality vinyl fencing to our customers.
Compare prices, explore our 'how to' videos, browse our gallery, and discover which wholesale vinyl fence is perfect for your yard, farm, or ranch.
For Collaboration and Business inquiries, please use the contact information below:
📩 Email: [e-mail]
===================
#chainlinkgate #diyfencing #residentialgate #homeimprovement #gateinstallation
© Wholesale Vinyl Fencing

[@ArmandoWasHere]

Looks like just what I need, unfortunately your website doesn't even mention a gate kit, or gates at all.

[@tysonschroeter9431]

This was great... thanks for making the video!

[@THEREALJBOOM]

🧂

[@billietribble3383]

if u have a good drill and an vice you can drill for the J bolts but a good center punch will help start the hole easy peezy

[@somjaisubaim1941]

ชุดประกอบประตู​แบบนี้​ ถ้ามีขายในไทยบ้างก็จะดีมาก..

[@lanettediaz8883]

Is the frame adjustable? I bought a gate and the width is 4ft 1 inch. I need it to be about 3ft 8 inches. Can the fame be cut to size?

[@Nepolean]

Thanks

[@Phatchurro]

This video 2 years old can you post a new link cuz when I go to the website says coming soon so do you guys have the kits on your website

[@Starkitty1]

Thank you so much for this video. I need to make a gate for my property to keep the asses from eating my flowers. I'm guessing I can just add some wheels to this and done?

[@jarulraj123]

Bought this.

[@carriekauzlarich2071]

Your website has NO references to chain link fences or these kits. How in the world do I go about purchasing one?!

[@hersheyhealth2039]

Google fence company near you, just order what they have

[@bradshaver105]

I need a 60 in tall by 40 in wide

[@snorttroll4379]

How does one unravel entangled chain link fence rolls?

[@WholesaleVinylFencing]

Very carefully.

[@hikerJohn]

The web site only has VINYL fences

[@alienproductions9948]

Call. They have chain link.

[@dreamingcode]

Went to your site. You only have Vinyl

[@bradshaver105]

Can I order a 60 in tall x 40 in wide?

[@mpalmer78]

I don't see a link to these kits.

[@615taz]

I need one 5ftx12ft W

[@benl5182]

Are you guys able to make a 10’x8’ kit?

[@hersheyhealth2039]

Too long, it would sag, order a stronger fully welded gate from a fence company

[@lentmain]

Sirs..., I measured three chain link section (30 feet 4 inches...) I need to convert over to a WIDE gate for a class A motor home to enter and leave the property... Do you make gates this long... ?????? (left and right side....) I could use a double high gate hinge post with an opposing reinforced wire creating a strong post for a gate to hang on to... Let me know and please include your phone number for describing this gate/hinge piece Looking forward to building a usable gate.... Thank you sir.....

[@sissytma3325]

I need a gate. How can i contact you

[@user-dj1md5tc2j]

Hey. tell me what metal the pipes are made of?

[@NordicDan]

Galvanized steel

[@tamaratamrot2681]

I did it with Woodglut.

[@z3phyrdok]

Why not just weld it instead of the 8 screws?

[@hersheyhealth2039]

Screws are faster and with the pressure of the chain link from one side to the other it's plenty sturdy

[@sklingenberg86]

Do you need an impact drill to drill the self tap screws?

[@WholesaleVinylFencing]

I assume there are other tools but the impact is a great tool for the job.

[@hersheyhealth2039]

A regular drill works great

[@sissytma3325]

How can I order a gate

[@WholesaleVinylFencing]

Call the number on our website. Monday - Friday 8-2. Or you can submit a quote request. 877-573-5561

[@Shyylo12]

I need to buy a kit for a section that is 6’ tall and 10’ wide or two at 6’ tall and 5’ wide. How do I find a price?

[@josephlatourette8329]

Don't buy one of these kits contact a real fence company give them your gate measurements and they will make you a custom gate with welded corners much higher quality then that cheap stuff

[@A2ZGeek]

yikes! The bowing in the middle is terrible!

[@josephlatourette8329]

I'm a welder for fence company and this is an insult to everything I stand for

[@hersheyhealth2039]

Lol why

[@RobHTech]

you don't need a drill press to drill a hole into the frame. you just need a good metal bit and good drill with torque and some patience. I wouldn't ever buy that POS gate. the gate looks disgusting

[@bobburnitt5389]

All you have to do is MARK the post with a Wrap Around Template at the location where the J-Bolt Hinge goes. Scribe a LINE around the post with a felt marker, Crayon, or pencil. Take a Center PUNCH and make a Punch Mark on the line of the post where it faces the GATE. Then measure from this punch mark around to ONE HALF of the circumference for the OTHER SIDE, make a punch mark there. I have done this so many times I can EYEBALL IT, actually anyone can eyeball it by simply taking a close look at it. But I ALWAYS scribe a LINE for "level" then eyeball the punch mark. After marking the two punch Marks, drill a 3/16 or 1/4 or even a 5/16 or 3/8 pilot hole at each punch mark. Any of those will work for a Pilot. I like to use a 1/4 inch drill for the pilot, but you can use what ever you have amongst or close to those I noted Then take a 5/8 drill and drill the finished hole. You can do this at the SHOP, but I PREFER to do it on site AFTER setting the post and allowing the concrete to CURE. By doing it at the SITE you can get the holes EXACTLY where you want them. In some locations you might NOT be able to drill the holes as they might be close to a WALL or some other obstruction, then of course it might be BETTER to drill it BEFORE SETTING THE POST. You can drill the POST at the site BEFORE SETTING but you can still "DRY FIT IT" to see if it will WORK. Or use a wrap around Pintle Hinge. This above gate I would try to NEVER SELL. But it is probably a decent seller for those trying to "do it themselves" for cheap. It is too unprofessioinal looking for a "FENCE COMPANY" in my opinion. They Make Cast Pot Metal fittings for the corners, I would use THOSE before I would do it like this as the finish product looks better. However the pot metal corners have been known to break or crack, but most of the time they are fine, I PREFER WELDED THOUGH. My gates of this size are WELDED and I use TENSION BARS with Tension Bands. I would use 1 3/8 OD .095 wall thickness and weld it with Shielded Metal Arc Welding or MIG. I use 11 Gauge galvanized after weaving fabric and STEEL Tie Wire. I realize not everyone has that capability, and need something done quick and cheap as their budget might not allow calling a "Fence Company" to do it. But "Drilling" if you have a portable drill motor with a Half Inch Chuck that is AC POWERED and a 5/8 Necked down Twist Drill that is all you need, no drill press required. I have several Drill Presses, as a RULE I like to drill my Posts ON SITE to get them just like I want them. On non-Galvanized Posts I use a CUTTING torch to blow the holes. BB 0ver 60 years building fence and gates.

[@Grggeorge]

Very slow method don’t make a video if you don’t know what your doing

[@tomekapompey563]

I will try to do it with Woodbex plans.