Building 1969 Dodge Charger R/T Part 2 Revell 1/25 Scale Model

레벨 1/25 스케일 69년형 닷지 차져 R/T 프라모델
1/25 scale plastic kit of 1969 Dodge Charger R/T
Part 1 • Building 1969 Dodge Ch...
Part 2 • Building 1969 Dodge Ch...
Part 3 • Building 1969 Dodge Ch...

[@ArdiOye]

Awesome bodypaint work! Very nice!!

[@mitchg64]

Great fantastic skills you have. I have so much to learn.

[@sbf109]

Thank you. :)

[@siw3770]

마스킹,,, 귀찮고 지루한 작업이지만, 떼어낼때의 그 쾌감은 말로 표현못하죠. 마치 보상받는기분^^

[@sbf109]

깔끔하게 잘 나온 마스킹 경계면이 들어날때면 그날 하루가 뿌듯해지죠. ^^

[@dannyburch4973]

Your attention to detail is off the charts Nice.

[@sbf109]

Thank you for watching..!

[@philippedefours6727]

hello, very successful. could you tell me what paint you used for the roof? Thanks for your answers

[@sbf109]

I used semi-gloss black Mr. Hobby lacquer paint.

[@kingranch1962]

Awesome

[@sbf109]

:) Thanks.

[@michaelk3085]

Have you tried using a 2K clear yet? I have been using it for about a year now and it greatly cuts down on the amount of sanding polishing I need to do. Not that there is anything wrong with your process obviously 😁

[@sbf109]

I don't know that. I wonder what kind of product it is. I'll find out if I can get it from where I am.🙂

[@EMP_modeler]

@@sbf109 2K lacquer has its advantages and disadvantages. Advantages: a high gloss finish that lasts for years, very resistant to handling, and easy to polish. Disadvantages: It is a product that when applied is very susceptible to the adherence of specks of dust, pet hair, etc. Despite this, it is an easy problem to solve with the usual sanding and polishing techniques. However, the main drawback of 2K lacquer is contamination by silicone particles, grease and dirt present in the environment, which react very negatively with the product and usually produce a very common problem such as the dreaded craters, which are small dimples. that appear on the lacquered surface and are contaminated areas that repel lacquer. There is no solution to this problem, it cannot be corrected, and you will have to unpaint the entire model and start all the painting work over again, and if decals have also been applied to the model, they will also be damaged. Therefore, the time that you can spend sanding and polishing the GSI Creos varnishes will be time that you will save in trouble with the 2K lacquer. After all, the end result of your work is very similar to that achieved using 2K lacquer. If you still want to try 2K lacquer, I recommend those from the manufacturer Gravity Colors, in addition to having a range of colors for cars that are wonderful. gravity-colors.com/

[@brianhurst3653]

How did you achieve your texture for the vinyl top

[@sbf109]

The vinyl top's texture is reproduced in the kit. It just needs a good coat of paint. 🙂

[@이헬로-i8y]

저도 한 번 만들어보고 싶네요 이런건 어디서 구매하죠??

[@sbf109]

프라모델 검색하시면 온라인에 많은 모형점들이 있습니다. ^^

[@jacktheripper_knife]

파트3도 기대 됩니다ㅎㅎ 작은 소원이지만 이니셜D팬이라 혹시 언젠가 기회가 되신다면 두부집 86도^^

[@sbf109]

파트3 부지런히 올리겠습니다. ^^ 이니셜D 86도 하나 사봐야겠네요. 봐주셔서 감사합니다~~!

[@rayyannoushad]

Hey man. Awesome build. Did the front end fit nicely first? It did you have to sand something. Ive heard that the grill fitment is not good on this kit.

[@sbf109]

You're right. There are a lot of places that don't fit well. I kept putting them together and sharpening and trimming them until they fit. The front grille was also sanded and trimmed. :)

[@rayyannoushad]

@@sbf109 oh. Thanks.

[@sangkeunlee2896]

센딩전에 마감재는 유광 2번하시고하시나요 아님 마감재는 몇번정도 올리시고 센딩작업을하시나요? 우렌탄은 안하시나요 마감재.. 참고좀할까했서요 ^^ 광이 너무 잘나와서요..ㅋ

[@sbf109]

유광 클리어를 상황에 따라 2~3회 올립니다. 데칼이 있을경우 3회를 올리는 경우가 많구요. 우레탄은 아직 안써봐서 나중에 한번 써볼 생각입니다. ^^

[@mickeykat92]

This is amazing! I bumped on your video and now I'm starting this as a hobby. I got a 68 Charger and waiting for the airbrush to arrive! Do you recommend Acrylic or Enamel paint?

[@sbf109]

Hi, welcome to the world of PlaModel. Lacquer paint is mainly used for body painting, enamel and acrylic paint are allowed for detailed painting. When your airbrush arrives, a new world will open up. :)

[@mickeykat92]

@@sbf109 Thank you for reply, I will look into Lacquer paint as an option, I'm very excited! Looking forward to more of your videos :)

[@dtgamedori]

1등

[@sbf109]

😃