1/24 REVELL '70 DODGE CHALLENGER T/A FULL VIDEO BUILD

[@vincentmannelli2258]

WOW!!!!!!! NICE!!!!!!! This is the BEST model build I have ever seen!!!!!!!! If you did not know that it was A model you would think that it was A real car.

[@MRLINSSCALEMODELING]

thank you very much!!🙂

[@mikeamescreations]

Clean and simple without over-doing the after market stuff. This is the kind of model building I like. Good Job!!

[@MRLINSSCALEMODELING]

Thank you very much!!😄

[@microboticsanimations9542]

Very underrated channel you deserve a lot more support

[@MRLINSSCALEMODELING]

much appreciate!!😄your like and subs would be the most support for me!😊

[@NishenNaidoo-v9t]

What a brilliant build. I just love all Dodge. Clean looking model, fine lines. Brilliant color. I have a same kit and looking into your video, helps me to do a little modification, but to keep it simple and elegant like yours. Thank you for the clip. Looking forward to you next build.

[@MRLINSSCALEMODELING]

thank you very much 😊

[@kingranch1962]

All I can say is WOW! Beautiful

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@carlosballesteros4670]

Absolutely stunning! The build is great. Nevertheless, I must point out a defect that is noticeable, located on the front pillar between windshield and roof pillar itself. If you look carefully when the car is on turntable, almost at the end of the video, you will understand my point. Of course, it isn't a situation derived from construction but it is revell's faulty engineering. I've watched not only this, but a number of videos and the result is exactly the same. Can be corrected if lower end of pillar is carefully separated and shortened, to finally glue it again back in place. What I did was a radical different solution: I bought AMT's USPS series. To be honest, I should have taken revell's as AMT comes with roof, separated as the model is dual option as convertible or standard and believe me folks, fixing the thing was a nightmare and to be honest, finishing is distant to be perfect. Either way, it is still being a beauty once finished.

[@MRLINSSCALEMODELING]

thank you for the info!!😊 I didn't even notice that!!

[@carlosballesteros4670]

@MRLINSSCALEMODELING ok thanks for sharing 👍

[@daniellebcooper7160]

Another work of art. 👍

[@MRLINSSCALEMODELING]

thank you very much!!

[@skipperrine2168]

I love Mr. Lin’s attention to detail on his models, such a joy to watch!

[@MRLINSSCALEMODELING]

thank you very much!!🙂

[@johncater7861]

Wow! Love the music. I tried scribing once - best left to the professionals.

[@MRLINSSCALEMODELING]

thank you..the scribing needs practicing and patience..take your time,it will be fine. have a nice day!!😊

[@JohnHappelFullMastHap]

WOW!!!! Awesomesauce right there!!! Beautiful build, great care in detail. Makes me put more into my builds, ty!!!!

[@MRLINSSCALEMODELING]

thank you very much!!

[@resistenciaterrestre7330]

Amigo, es una belleza. Este auto y el GTO son los favoritos de mi padre. Cuando era niño me contaba de ellos y se le iluminaba la cara; ahora cuando lo recuerdo hasta me pongo a sollozar. Que cosas, hoy me sacaste una lágrimas. Sin tan solo tuviera tu habilidad haría uno para dárselo a mi padre. Gracias por hacernos tan felices. Saludos y sigue adelante.

[@SolamenteVees]

Almost a spot-on match to Chrysler FK5- Burnt Orange... Fantastic!

[@MRLINSSCALEMODELING]

thank you very much!!😄

[@shawn8003]

Mr Lin.s you sir are an ARTIST. I been watching others do this. Same model and some are very nice. You take it to another level. This is the COOLEST I HAVE EVER SEEN!!! and as I like to say………You keep building them and I will keep watching them. See you Brother of the Styrene.

[@MRLINSSCALEMODELING]

thank you very much !!😊

[@JackFlemingFan1]

Excellent video & job building your Revell '70 Dodge Challenger T/A model kit too!

[@MRLINSSCALEMODELING]

thank you very much!!😄

[@fixedit8689]

Great skills, techniques and craftsmanship.

[@MRLINSSCALEMODELING]

thank you very much!!😄

[@BenjaminTart]

Just started the hobby, hope to be half this good one day, great job!

[@MRLINSSCALEMODELING]

have fun and carry on!!cheers!!😊

[@gouyachannel1593]

Superbe réalisation.

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@phoenixblack1220]

Sir, you do some of the best work I have ever seen!

[@MRLINSSCALEMODELING]

Thank you very much!!😊

[@peterc6547]

Fantastic build Mr Lin. The paint job and clear was very good and you achieved a great result. A great colour that suited the car very well. To clarify for myself when you say 1:2 ratio you mean 1 part paint and 2 part thinner? For example 10ml paint and 20ml thinner? The aftermarket parts added great additional detail also as well as the modifications you did to the gauges and grill for example. I also think 60's and 70's muscle cars have so much character and their own individual appeal. I look forward to your next build and thank you for sharing your skills.

[@MRLINSSCALEMODELING]

HI,thank you very much😊yes,the 1:2 ratio means one part paint and 2 part thinner,I am glad you like my video,cheers!!😄

[@dominiqueviari5261]

Thank you Mr. Lin for sharing your outstanding skills, you are very talented!

[@MRLINSSCALEMODELING]

Thank you very much!!😊

[@devinminar3089]

It's a great looking car but just a word of advice back in those days on the 70 Challenger ta and on most muscle cars those graphics were vinyl and put on after the car was painted there would be no clear coat over them so they would remain a matte finish.

[@MRLINSSCALEMODELING]

thank you for watching and thank you for your advice!!😊

[@AngelosWorkbench]

Thank you for your excellent videos. I enjoy watching them very much. They are very inspirational and full of great tips and tricks.

[@MRLINSSCALEMODELING]

hi,I am glad my videos are useful,than you for watching!😊

[@vtsibinog]

Angelo, you are great as well. I found your videoes when I entered to scale modeling these helped me a lot. thx bud!

[@ScaleAutoGarage]

Not an American muscle fan but I can always appreciate amazing work. Beautiful build as always. Turned out stunning and your small modifications make it even better. Great work sir.

[@MRLINSSCALEMODELING]

thank you my friend!!😄

[@bigchef2112]

You do amazing work. A master craftsman.👏🏻👏🏻👏🏻

[@MRLINSSCALEMODELING]

Thank you for your supporting!!😊

[@mikegiroux4612]

Very well done..👍

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@c.d.scalemodels9198]

Mr Lin, I can't wait 2 build my kit now..........it turned out stunning!!!!!!!!!! I ALWAYS enjoy your builds & learn a lot along the way, thanks so much & I'll speak 2 U soon!!!!!!!!!!!!

[@MRLINSSCALEMODELING]

Thank you my friend!!I am glad my video is useful,happy modelling!!;-)

[@lukesanders8258]

I have always worried about doing indicator lights. I will now use Bare Metal Foil - great idea! I think I will mask them first just to be safe!

[@MRLINSSCALEMODELING]

thank you very much!😄

[@MrGardman]

Beautiful!

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@Maty-fisherman]

wow this is one of the best videos of a model build I've seen, I love your ideas and your great work I was memorised watching this very cool and professional work, great job mate excellent video I'll be saving this for ideas on my builds.

[@MRLINSSCALEMODELING]

thank you very much!😄

[@spankyham9607]

I will have to try this chrome paint you use because it really turns out nice.

[@MRLINSSCALEMODELING]

The finisher's formula chrome is a very useful color...enjoy it!!😊

[@oscarferrusquilla]

Beautiful built, just a question, where can i get a template for tire letters?

[@kinumike]

Nice work . Sure did come out beautiful. You show me some nice tricks . Thank you can't wait for the next build.

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@cristianci00]

Awesome work

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@garyakins5392]

Beautiful build! I love to see the muscle car builds done with this kind of quality. I'm planning a '69 Chevelle SS and would love to know where you got the Goodyear Polyglass GT Stencils. Awesome job!!

[@MRLINSSCALEMODELING]

thank you!! I got this stencil couple years ago.I forget where I got it...😂 try search"studio 27" "hobby design" products..maybe you will find something you want. cheers!!😊

[@ozstrider]

Another fantastic work. All the little details really make it look authentic.

[@MRLINSSCALEMODELING]

Thank you my friend!:-)

[@1955mouse]

you do an awesome job on these builds👍....take any requests? looking to see many more!!

[@MRLINSSCALEMODELING]

thank you my friend!!😊I am not available for commission now..maybe sometime in future I will sell my finished works due to my limited space..😉

[@Motomini12]

Excellent build video!. The steps are very well explained, outstanding camera works and editing. Musics are also beautiful. Now you make me want to build cars 😆 Definitely subscribing 👍looking forward for your next video

[@MRLINSSCALEMODELING]

thank you very much!!😄I am glad you like my video😄and by the way, your bike models are great!cheers!👍

[@Motomini12]

@@MRLINSSCALEMODELING thanks! currently I'm focusing on building and collecting 1/12 bikes. But after seeing your video I start thinking about cars 😆 Stay safe and happy modeling my friend 😊

[@dynaflow666]

PERFECT!

[@MRLINSSCALEMODELING]

thank you very much!!🙂

[@claudineioliveira1183]

Parabéns ficou show. Comprei um modelo desse vou pintar da mesma cor

[@rickypollock9100]

Excellent work!!

[@MRLINSSCALEMODELING]

thank you very much!!😄

[@FEC1968]

Great build 💯

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@rsmad9406]

Awesome build ; love it 😊

[@MRLINSSCALEMODELING]

Thank you very much!!

[@jeffreysandrone3710]

Sweet build (love the Wisconsin plates). I'm a rattle can baby so this is way above my skill level. Tell me, what is that sticky pen you use to place small components? I use dental sticky applicators but they leave a residue. Thanks.

[@MRLINSSCALEMODELING]

thank you very much!!the sticky pen is just a wax pencil usually used on nail painting art..easy to clean. cheers!!😊

[@madhatterstudios966]

As always Mr Lin, you have produced a fantastic and inspirational model. I'm new to black CA, and was wondering how long you let it cure for nefore sanding? Some CA glues require only 20 minutes or so. Does it have to be rock hard or relatively soft? I have learnt so much about car modelling from your videos. Keep up the amazing work

[@MRLINSSCALEMODELING]

thank you! I am glad my videos are useful for you😊 when I use black C.A glue, I oftenI use the C.A accelerator(you can get it on web),that will reduces the hardening time to within seconds,than I work on that...be sure the glue is totaly dried and harden,otherwise it might be a mess..cheers!😊

[@davidhinkson8856]

Just a few choice mods and you've made an already good kit stand out even more!

[@MRLINSSCALEMODELING]

thank you very much!!😊

[@bromhead100]

fantastic,glad i subscribed. where did you get the tyre stencil from?

[@MRLINSSCALEMODELING]

hi, the PE template for the wheel was from hobby design PE set for '70 hemi cuda,you can choose different kinds of template by aftermarket PE set,they are easy to get on internet.cheers!!😊

[@alexandernickerson8733]

Where about do you get your aftermarket parts? This turned out amazing!

[@MRLINSSCALEMODELING]

hi, I bought them in several shop on the internet....some of them are just spare parts I used to keep..

[@robmckee4011]

I really admire your work Mr. Lin. Where do you find the tiny rivets for door locks etc?

[@MRLINSSCALEMODELING]

thank you, you can try searching:"hobby design rivet"..I got them on internet, very convenience item..

[@lilypondgarage2968]

Unbelievable

[@MRLINSSCALEMODELING]

Thank you very much!!😊

[@lanceeggermann9300]

What is your ratio to thinning paint 2 parts paint 1 part thinner?

[@kurtahrens]

Mr. Lin, would you mind linking where you got the PE template for lettering the tires?

[@kurtahrens]

Thank you for viewing my comment Mr. Lin. I have honestly been searching for this template on the internet since seeing it in your video and can't find it anywhere. I was hoping you might be able to point me in the right direction.

[@dampfwolle3597]

WOW

[@turbodrive182]

Perfection

[@MRLINSSCALEMODELING]

thank you 😊

[@nivramporter4714]

my father had this exact car and my mother ran it into a tree, beautiful build....

[@MRLINSSCALEMODELING]

oh...what a pity...😱

[@danielbeckett5947]

great finish as always! what did you use for the wood finish on the doors and center console? where did you get the PE template for the wheel writing?

[@MRLINSSCALEMODELING]

hi,thank you for watching my friend!!😊 the wood finish on the doors and center console was brush painted with vallejo model color light brown.. the PE template for the wheel was from hobby design PE set for '70 hemi cuda,you can choose different kinds of template by aftermarket PE set,they are easy to get on internet.cheers!!😊

[@c.d.scalemodels9198]

Hey Mr Lin, Chris here……. I’m about 2 build this kit & in the comment about the photo etch part regarding the wheel writing…… I’m not quite sure what this person means….. can U explain 2 me what U 2 are referring to please???? I didn’t notice any photo etch on the wheel so I’m confused. If there’s something I’m missing, please let me know so I can perhaps look into this photo etch part. Thanks much

[@MRLINSSCALEMODELING]

hi,we are talking about the template which I used to spray letters on tires... there is no letters on the kit's tire, so I use template to paint the letters on tire,you can check about 19:34 in this video..it shows how I use the P.E template..cheers!! 😄

[@c.d.scalemodels9198]

@@MRLINSSCALEMODELING thanks much Mr. Lin…….I appreciate that very much….. be well

[@larryshade6993]

Are those enamel paints? Thanks

[@MRLINSSCALEMODELING]

hi, the paint is lacquar base paint😊

[@ast-og-losta]

Im building a 69 from pro modeler now. I need to up my game. Thanks!

[@MRLINSSCALEMODELING]

thank you!!😊wish my video is useful..😊

[@BAHDK]

How do the decals not come off when soap and water after sanding?

[@MRLINSSCALEMODELING]

hi,after the decal is dried, I put couple clear coat to protect decal from later sanding process..

[@philhull29]

What tool were you using to install the fog light lenses

[@MRLINSSCALEMODELING]

hi,just a wax pencil..a very handy tool

[@T96-g7j]

このタイヤテンプレートはどこのものですか？

[@giuseppebo8995]

Fantastic

[@MRLINSSCALEMODELING]

Thank you very much!!:-)

[@c.d.scalemodels9198]

Mr Lin, Chris here….. would U happen 3 know the size of the magnets U use for the car hood? I don’t want 2 get 2 small or 2 big a size….. thanks much!!!!

[@MRLINSSCALEMODELING]

hi,the diameter of the magnet is 2mm,and the thickness of it is 1mm. about gluing , my suggestion is epoxy glue,it works fine with metal and plastic.. have fun!! cheers!😊

[@c.d.scalemodels9198]

@@MRLINSSCALEMODELING thanks so much Mr Lin!!!!!

[@MRLINSSCALEMODELING]

you are welcome!!this kit is easy to build,wish this video is useful for you!!

[@c.d.scalemodels9198]

@@MRLINSSCALEMODELING so far it is an easy build. I’m pretty much following just about all of your techniques that I never thought of before in this build & I will use these tricks in my other builds as well if they apply….. a million thanks!!!!!

[@chauffeurmarco]

Where can I get the Goodyear metal thing?

[@MRLINSSCALEMODELING]

hi,it from a P.E set made by hobby design long ago... there are many product like this recently, or you can just search decal for wheels,they are nice too.. cheers!!

[@PhilipBetenbaugh]

im kind of new in the scale modeling, but what is a wet coat?

[@PhilipBetenbaugh]

also what airbrush do you use

[@MRLINSSCALEMODELING]

hi, the "wet coat" means when you spray paint to the model, make sure the surface is moist but not flooding... for normal situation,I usually use 0.3 mm airbrush,in this case ,I use Mr.hobby PS-289 airbrush...for clear coat, I use H&S Infinity CR Plus 0.4mm airbrush..

[@PhilipBetenbaugh]

@@MRLINSSCALEMODELING Thank you for telling me, and I love watching your videos!

[@MRLINSSCALEMODELING]

Thank you for watching!!😊wish my video is useful for you..

[@willylanters1133]

where did you buy the p.e template for the tires

[@MRLINSSCALEMODELING]

hi,I got this P.E long time ago..forgot where I find it..you can try "studio 27" or"crazy modeler" products😊

[@willylanters1133]

@@MRLINSSCALEMODELING thank jou MR. Lin

[@augustopalomino2337]

Más parece un r/t

[@m.e.9974]

Nice content...Would you see and comment on another you tube channel? His is mad dog merv.....he is all into models,and tell him Mark sent you. Tnxs in advance.

[@skipperrine2168]

Where can I get one of those templates for the tires?

[@MRLINSSCALEMODELING]

I got this stencil couple years ago.I forget where I got it...😂 try search"studio 27" "hobby design" products..maybe you will find something you want. cheers!!😊