Building a $100 chopper

[@dogpaw775]

watch at 1 3/4 x speed, you can really see how really competent and productive our hero's are.

[@Thunder_Bear_mg]

I am jealous of this troll comment. Wish I had thought of it myself. Good job.

[@LizakDominik1988]

I can’t believe it works. Lol

[@paulsilson2148]

Its like watching OCC , all over again.

[@TheEazyCo]

With less money and more billet aluminum

[@redneckwithajeep5001]

Why would you insult these guys like that? It’s way better than OCC

[@norego6237]

1000's of hours cant deny that it would have taken that long to make the mess in that shop . there's got a be a million bucks worth of chopper parts on the floor . livin the dream

[@t.s.racing]

Jon and Craig, actually quite a bit of Engineering in the top motor mount. The engine grows taller and shrinks back down with each heat and cooling cycle. One of the MANY reasons for aluminum heads and especially cylinders with a aluminum engine case. Everything grows at a similar expansion rate. That being said, the top mount needs shouldered studs, and a thick flat washer between each head and the top mount. T.S. RACING 🏁

[@neodutch]

Put your hand in a sammich bag. Grab a handful of grease. Put the bearing in the grease and pull the bag inside out. Twist the bag until the grease is forced through the bearing.

[@Seaniesean111]

Always love it when you guys sing a song together. You are the Simon and Garfunkel of motorcycle builders.

[@joshyoung1281]

That pterodactyl edit was badazz

[@03roadking]

where's Paul? I can't see Paul, where's he at? Are you guys hiding them? Are you supposed to be touching bikes without Paul there?😂😂

[@TheEazyCo]

He’s on vacation

[@edwardvanvalkenburg3254]

Howdy Easy Company John Craig, thank you for the video and especially what you do. Keep it up please. Still reminds me of church. Escribité.

[@03roadking]

There should always be an old man in the background somewhere for quality control.😂

[@williamanthony5021]

I will be Right down there. I am from duck dynasty lol

[@ARGONONYA-ye6wl]

Post production Andy is on point adding context to the madness. Best part of Thursdays is New Eazy Co Vid. Scratching Ass n Building Choppers.

[@salisburysteve3104]

Thank god for Paul

[@TheEazyCo]

We are paul

[@thatsmrharley2u2]

Thank gawd for Paul.

[@countryrider8150]

Every week when I watch your guys videos I'm like man you guys need more room for activities

[@TheEazyCo]

More room would be nice

[@finemessugotmein]

Jeeeeeesus ! 14:03 …. I thought the bike fell over ! 😂

[@pjh5337]

Paul appreciation post ❤

[@Thunder_Bear_mg]

Eazy Company is the epitome of failing upwards.

[@juanbrito-nina2877]

GREAT editing!!!😂❤ Love it!

[@twocupstwodrams7535]

Loctite? Hell no! And miss out on the road side repair bit between frustrating kickstart segments. Thanks for sharing, Ride Free

[@blazebrady3659]

Those deep dish slot mags are 🔥🔥

[@mikebenoit6648]

Cool 😎 build Brothers

[@ghosteh6503]

I’d love to buy that tank you guys painted.

[@TheEazyCo]

Sure send us a email

[@veteran234]

you cant look bad, hahahaha i dont mind a little disorganized shop, but your place OMG!!!!

[@hippieschoppercorner]

Ohh wee, I bet that crack smells like GARLIC 😂😂😂😂😂😂

[@SlickHeadCustomCycles]

Or parmesan cheese!!!!

[@hippieschoppercorner]

@@SlickHeadCustomCycles booty lol

[@benderbender1233]

😂

[@chopperguy6661]

Mount coil first then the bracket

[@unchained20000000]

Craig, why can't we get anything done, Because we perpetually take parts off of other completed bikes, which makes us always working on these bikes and never completing any of them. We call it the chopper shuffle!

[@unchained20000000]

No Craig, we can't contemplate progress, it just leads to depression.

[@unchained20000000]

kzbin.info/www/bejne/n6ipiWihpq6mr9ksi=eDBMwvayMNBhLuDX

[@beausimmons1091]

You guys should really wait for Paul before you touch any bikes. Just sayin'. For real though, great content as always.

[@TheEazyCo]

Never

[@mikebenoit6648]

Cool 😎 Bike

[@jasonadams5187]

Awesome video and awesome content can’t wait for the next video Thank’s

[@TheEazyCo]

Hey are you local to us?

[@walterfechter8080]

I cringed a little at 2:12. I remember, back in the early 1970s, how I scored "show chromed" fork tubes from Barney's and from Forking by Frank as I pushed those fork tubes through the bottom triple clamp. Yeah, I used screwdrivers and other jerry-rigged wedges to open up the slots in bottom clamps. Still, I screwed up the chrome on the fork tubes. It's an imperfect world. Besides, I built bikes to be ridden, not garage queens. Thanks, John, Craig, Paul, and Andrew.

[@mikebenoit6648]

Lol you guys are a trip ❤😂😂😂

[@yungBitta291]

Decent day

[@HangtownTactical]

I want a $100 chopper damn..

[@pastorbobncc365]

What camera's do you use? Always love stopping by the shop, I see you have construction going on in the background, wuzup with that?

[@Tr3smass]

These 2 are hilarious great content... Craig didn't put any points in finger dexterity he put all in pitiful strength, lol oh and John don't buy new drill bits just learn to sharpen the ones you have it'll save you tons of cash and it's not hard to learn

[@expiredwarranty8085]

Can we please get an Eazy Company shirt with all the things John is known as?

[@ghosteh6503]

Could be called the Alias shirt

[@alva8818]

Conteúdo bacana irmão! Saudações 🇧🇷

[@DaveWhite1979]

🤘🏻🤘🏻🤘🏻🤙🏼🤙🏼🤙🏼

[@Evans_cycle]

Drop one in there for Bill 😂😂 that's fuckin great love you guys that shit made my day.😂

[@papawpaul]

Bro!? I want you guys to fuckin ride in Phoenix!!!!! East Coasters are seasonal gangsters Phoenix is 365 babay😂🎉❤

[@TheEazyCo]

We are down

[@jeremywilson4326]

You have a grease packer in the palms of your hands .

[@Mahi-ux1ne]

40:10

[@spidervision3532]

🧃🐒 lynchtime...☠️

[@бориссоколов-м9р]

Вы Крутые))you are cool

[@TheEazyCo]

You are cool

[@бориссоколов-м9р]

@@TheEazyCo you are coolest😁

[@IronheadNBMA]

Easy company also know ass the billet boys. Are a local oi band. Anti Palestine ironhead build with a FAT tire babyyyy

[@Killer_Kovacs]

Just pretend you're on a competition reality tv show

[@D0CT0RD00M]

Dude the tism would go so crazy cleaning your shop. It would take me 2 weeks to do it but it would be a mental orgasm the whole time.

[@TheEazyCo]

Anytime you are ready open invite

[@jerrybigrig9475]

👍😎👍

[@jimmyjambon9206]

Get the tether-bike in a safer place please.

[@cintroberts6614]

Maybe 50 years ago you could do it for $100 but no way is that happening today.

[@benderbender1233]

🤘😎🤘

[@spidervision3532]

🥠 A horse with suspensions is not a bad ride.. ☠️☠️☠️☠️💥°°°°°°🔫

[@87cigs]

whos the thumbnail? cant be either of our portly heroes... i love the return of craig cam. hes so much more natural filming. always seems awkward when someone else films.

[@TheEazyCo]

That’s our buddy Dave Mann we went to high school with him

[@benderbender1233]

same

[@DEATHMETALCYCLE]

I also, refuse to buy good drill bits

[@TheEazyCo]

No need

[@DEATHMETALCYCLE]

@@TheEazyCo i buy large sets of wood bits

[@shortcut-stylz2560]

The gum chewing is driving me crazy.

[@cooperfranco]

Consistently the most click-bait titles with the most boring content.

[@TheEazyCo]

You’re welcome