Building a B20 Vtec Honda CRV in 31 Minutes! (Complete Transformation) Mod My CRV

  Рет қаралды 17,218

Donny The Late Model Tech

Donny The Late Model Tech

Күн бұрын

Пікірлер: 75
@robertdiehl9003
@robertdiehl9003 10 ай бұрын
This man is an Ace Master mechanic. Glad I found the channel.
@swanginfleet
@swanginfleet 11 ай бұрын
Just seen this on my local marketplace. Awesome build for a good price. I have a boosted, b20v, awd, 5spd. I made 267whp on 14psi on the greddy kit. Finally going with a built b18 but my clutch got sent to my neighbor and they kept it so im fighting with fedex😢.
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Nice 👍
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Sorry about the clutch.
@swanginfleet
@swanginfleet 11 ай бұрын
@@Donnythelatemodeltech Yeah, I appreciate it. I bought it (CC stage 4) from Humble Performance because I've been watching their channel for years. I was not pleased with how they initially handled the situation but am giving them time to resolve it before I drag their name through the dirt.
@9krpmsrotationsperminute971
@9krpmsrotationsperminute971 10 ай бұрын
Wtf 260hp that's kinda weak, my turbo GSR makes 412whp with only 13psi?
@swanginfleet
@swanginfleet 9 ай бұрын
@9krpmsrotationsperminute971 Well psi is not a great way to look at it. Your turbo may be larger and moving alot more volume. I had a greddy 18g which is fairly small but spools quick. Also, the b20 I had was very limited on what I could do.
@Sciondom
@Sciondom 11 ай бұрын
Didn’t know it was you at 1st.. loving the recap episode ✌🏽
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Thanks Brother. Happy New Year!
@Jason-nk4yr
@Jason-nk4yr 11 ай бұрын
Awesome documentary of a rd1
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
lol thanks man!
@cartelbeaux7040
@cartelbeaux7040 11 ай бұрын
🔥Amazing content! Kept my attention from start to finish. I have a 07 Crv, definitely love this build.
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Most appreciated! Happy New Year!
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
Ypu haveone lead off the oil one for the car you can put a connector that goes in the wire and run it in from the pressure sensor to that you have 26:18
@hkk3656
@hkk3656 8 ай бұрын
I found you on your garage door spring replacement. Big help. I'm a car guy too, so I just subscribed.
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
You need to adjust the timing or put a set of valves and port polish intake manifold and put a piece of foam in that intake pipe you have so no water sucks up in it 27:13
@MstrB0ss
@MstrB0ss 10 ай бұрын
Bro, the progress is super dope to see. Been subbed for a decent while. Btw, i have a black 98 awd manual that I'd let go for $1500. Moving to the Philippines for a few years at least. Has two codes, one is tps the other is iacv I believe. Trans shifts damned good and other than the idle issue the engine is crazy strong. Previous owner said its a jdm b20. Otherwise have $4500 in receipts over the last 3 years for new cat clutch full tune up and all fluids including Trans and different, new master and slave cylinder. Most the major maintenance is done. Interior is very decent. title appears clean on title however it when searching records it was stolen from the previous owner. Again, title has zero indicated of salvage and is in my name. Only have about a month left till I have to go. Im San diego. I would love to see you start a new project with it. Let me know.
@Donnythelatemodeltech
@Donnythelatemodeltech 10 ай бұрын
Wow , that’s a great offer and really do appreciate it. But, sadly my CRV days might be over, currently this car is for sale. I’ve got some health issues I’m dealing this currently and heavy wrenching I currently can’t handle.
@MstrB0ss
@MstrB0ss 10 ай бұрын
@@Donnythelatemodeltech sorry to hear. Well wishes upon well wishes! Probably going to do an awd 2nd gen oddessy in the Philippines. Probably have another 1st gen crv as well. Ok, well take care! Thanks!
@robertdiehl9003
@robertdiehl9003 10 ай бұрын
Great video. I bought a 98 crv I bought recently. Definitely a love/ have relationship for me. Such a p.i.t.a. to work on because of North East rust in my state...
@Donnythelatemodeltech
@Donnythelatemodeltech 10 ай бұрын
Right on!👍
@AdamNZ
@AdamNZ 6 ай бұрын
Same dude. I got to fix mine but it ain't rusty.
@NagaMotorsports
@NagaMotorsports 11 ай бұрын
W mans, I got a 2000 crv I’m messing with and don’t know where to start hah
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
👍
@gregovolsung8769
@gregovolsung8769 11 ай бұрын
Always well spoken and quality material. Awesome; Thank you
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Very appreciated.
@Gorillaforce1
@Gorillaforce1 10 ай бұрын
the left front mount can you share where you find it? BTW Your crv look sick
@ramgabe1027
@ramgabe1027 11 ай бұрын
22:28 To block guard or to not block guard. That is the question. I’m going with using block guard my B20. Thoughts?
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Yeah, I thought about it. Wouldn’t hurt.
@jonathancruz3939
@jonathancruz3939 10 ай бұрын
Hi Donny, I’ve been trying to mod my 2021 Honda crv and came across this video, you inspired me to do what you do. Did you go to school for this or how did you learn how to basically build a car?
@Donnythelatemodeltech
@Donnythelatemodeltech 10 ай бұрын
20 years as an Automotive technician
@ronaldvallesteros7890
@ronaldvallesteros7890 2 ай бұрын
awsome videos! BTW where did you get the creeper?
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
Were did you get the boots for the axles 7:12
@miguelgutirrrez1385
@miguelgutirrrez1385 3 ай бұрын
Hi there brother I got a crv same is yours I'm going to lowered and Im going to need the same extenders where do you get them if you can share the link or part number o really appreciate it ..thanks by the way nice crv !!
@andrewloves1993
@andrewloves1993 11 ай бұрын
I have a 5 speed rd1 and want to do a VTEC build. How much in total would you say the VTEC part of this build cost you?
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
I spent at least 1500. Machined head, ecu , injectors, gasket , VTEC oil kit, arp head studs, aem afr , had to source cams and VTEC solenoid.
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Power steering was something I didn’t really show in the videos, bracket and pump from a 99 si .
@andrewloves1993
@andrewloves1993 11 ай бұрын
@@Donnythelatemodeltech Thanks for the extra info, how much of a power increase would you say you have gained over stock b20 power? My crv is my family car and I'm trying to push some good decent power but nothing to absurd. I have a turbo Sentra ser spec v and it's to much for my kid 😅, but he also likes my fast cars haha.
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
@@andrewloves1993 not really sure, it’s way faster than it was. Not faster than a gsr integra.
@andrewloves1993
@andrewloves1993 11 ай бұрын
@@Donnythelatemodeltech that range sound about right haha, thanks for documenting this whole process, b20 VTEC is awesome
@LevelUpMechanics
@LevelUpMechanics 11 ай бұрын
Great video! So awesome ❤😁
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Thank you!! 😁
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
Feels great to make free videos. lol.
@luisochoa495
@luisochoa495 4 ай бұрын
Hopefully we get more Crv content soon!
@brandonreynoso4563
@brandonreynoso4563 6 ай бұрын
What’s better suspension for wanting to keep the car long term lifting it or coil overs?
@ridebiking
@ridebiking 4 ай бұрын
Stock height good suspension components
@redxbell1373
@redxbell1373 10 ай бұрын
Was the front lip a 97 Cherokee?
@anthonybryant7390
@anthonybryant7390 9 ай бұрын
Wish has your skills and patience. Luv this car momz had same year. Looking to buy some day.
@anthonybryant7390
@anthonybryant7390 9 ай бұрын
Ever want to sell it ;) . Really nice work
@AdamNZ
@AdamNZ 6 ай бұрын
Hope to do similar things to my 98 CRV RVI
@12dan-t1i
@12dan-t1i 5 ай бұрын
ive actually messaged you on facebook interested in buying the crv, really cool build, is it perhaps still for sale?
@quickspoolgarage
@quickspoolgarage 11 ай бұрын
Dump Clutch Test!! Those are always fun 🤣
@Donnythelatemodeltech
@Donnythelatemodeltech 11 ай бұрын
They are!
@nastyy_mk4
@nastyy_mk4 10 ай бұрын
what are the specs on those Vs wheels?
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
Mine was urban camo red grey and black 8:20
@dannymiller5648
@dannymiller5648 3 ай бұрын
How much for the crv?
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
Who are those deom the hologans 10:06
@thesonofalivinggod6782
@thesonofalivinggod6782 10 ай бұрын
Hey boss where did you buy your vinyl wrap?
@Donnythelatemodeltech
@Donnythelatemodeltech 10 ай бұрын
Sponsored by Vvivid.
@thesonofalivinggod6782
@thesonofalivinggod6782 10 ай бұрын
@@Donnythelatemodeltech how much vinyl wrap did you need how big was the role they sent you... thanks
@AS-zg8gv
@AS-zg8gv 6 ай бұрын
I wish I was either mechanically inclined or had money
@vipcress
@vipcress 6 ай бұрын
You, or a future version of you are both.
@AdamNZ
@AdamNZ 6 ай бұрын
You can be if you try and apply yourself
@robertdiehl9003
@robertdiehl9003 10 ай бұрын
4:05- looks like typical driving in New Jersey....
@user-55555-i
@user-55555-i 11 ай бұрын
@Lucavalentine1776
@Lucavalentine1776 10 ай бұрын
Why are you selling the CRV?
@9krpmsrotationsperminute971
@9krpmsrotationsperminute971 10 ай бұрын
Cause modified B20s are time bombs, go looks up b20 jointed sleeves😂 you won't be disappointed🤣
@victoremanuelish
@victoremanuelish 8 ай бұрын
I just want to be one of them
@mryang3644
@mryang3644 7 ай бұрын
U tryin to flip that crv ? 😂
@Donnythelatemodeltech
@Donnythelatemodeltech 7 ай бұрын
Sold it three month ago.
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
Cams dauk valve springs and retainers 27:13
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
How much and where do i get one i nesd one i have gsr one 26:27
@9krpmsrotationsperminute971
@9krpmsrotationsperminute971 10 ай бұрын
Eww Jointed sleeve B20 Weakk!! I Hope it last you longer than the majority😂
@АрГолд
@АрГолд 6 ай бұрын
CR -V ,1pok sovrimeh klasik 👍👍👍👍👍.xohda⚡. , no akkord 3 ca2 ca4 ca5
@THEGHOST-p7q
@THEGHOST-p7q 3 ай бұрын
I can eye ball them and then i bet people at a shop that its straight for stuff 20:52
400,000KM Honda CRV REFRESH Gets MESSY!
19:43
Speed Academy
Рет қаралды 121 М.
B20Vtec Build Timelapse
17:10
H FAB
Рет қаралды 200 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
97-01 Honda CR-V B20 AWD Jackspania Header Unboxing and Install
17:27
The Honda Resource
Рет қаралды 10 М.
CRV G1 #MeetingCRV2022
5:53
Jack Scooter Channel
Рет қаралды 24 М.
B20 VTEC Build Guide : B16 Cylinder Head = 8k Rpm Screaming Honda / Mod My CRV RD1
10:40
A BIG TURBO Honda CR-V is Hilariously Dumb
13:19
ThatDudeinBlue
Рет қаралды 169 М.
Building a $2000 K-Swap Honda Civic In 29 Minutes
29:00
Speed Academy
Рет қаралды 490 М.
Simple Car Camping Setup | 2000 Honda CR-V
7:54
Elijahdon
Рет қаралды 13 М.
How To Manual Transmission Swap Your Car & Ebay Clutch Test /Mod My Honda CRV  RD1
13:00