Building a Camera Stand

Building a Camera Stand - E01

Рет қаралды 7,928

Күн бұрын

Пікірлер: 35

@handycrowd 2 жыл бұрын

Nice work! Going to be great. I know what you mean about the pro. rigs, some of those cost as much as a small car! Funny, I had to make a kind of overhead handle for my daughters camera today. Just a 'C' shape in flat aluminium with rubber for the handle and the screw in the bottom so she can shoot video near the floor.

@kihestad 2 жыл бұрын

That was quite a coincidence, it sounds like a smart solution! 👍 I just recently saw a review of a heavy duty professional tripod that cost more than $10 000 - and that was still just a tripod! Thanks a lot for having faith in my project 😊 I hope it will be decent!

@RyansGarageUK 2 жыл бұрын

Excellent Video, I can really appreciate the effort you put into the production values of this. Well done. Ryan.

@kihestad 2 жыл бұрын

Thank's Ryan 😊I really hope it will be easier to record videos when I am done with this one 🤞

@tshansen 2 жыл бұрын

Hahaha.... well it is safe to say, you impressed me a lot. The 3D model and putting it all together with all those angles and explanations. Amazingly done mr. Hestad 👏🏻

@kihestad 2 жыл бұрын

Thanks mister, trying my best to make the video engaging. It makes the recording more fun as well 😊

@komoru Жыл бұрын

Really cool build!

@kihestad Жыл бұрын

Thanks, I have been using it now for quite a while and it works well 😊

@helder4u 2 жыл бұрын

generally all you bracing material seems to thin or weak compared to the main tubes. i think You would save much work and time making havier solid brackets in the bottom, and upper sides too; the bolt size seems already appropriate though :)

@kihestad 2 жыл бұрын

Yes, I can confirm that, I cannot fully tighten the bolts - the bracing just bends. The three vertical pipes are quite sturdy, but it makes the sliding mechanism a bit hard to move up and down (that's shown in the next video) when the pipes are flexing a bit, and of course I need to wait until the stand is stable after moving it - and it's a bit annoying. I have used it now for some months, and gained a bit experience. It is a fantastic tool compared to my old tripod, but it can be improved. Thanks a lot for you thoughts! 😊

@puravjaswal4075 2 жыл бұрын

Amazing video! Keep up the good work. you are a genius.

@kihestad 2 жыл бұрын

Thanks a lot 🙂

@Flea-Flicker 2 жыл бұрын

That's a great video, I planned to make whatever you said in the title, then realize I can't cut steel channel or use a welder, even own a welder. So I was thinking, maybe down the street I can rent a power hacksaw go to the local steel place and pick up an eight footer, then off to rent a welder. That was easy, thank you.

@kihestad 2 жыл бұрын

What? I thought everyone had these kinds of tools 😳🤣

@hsjawanda Жыл бұрын

Great build!

@kihestad Жыл бұрын

Thanks 🙏 I have a couple of follow up videos about it, it gets even better 😊

@hsjawanda Жыл бұрын

@@kihestad Yeah, I watched those too.

@i_cant_be_racist_im_a_pand5626 2 жыл бұрын

umm... could u make stops on the rolls so it would stay in place and not move?

@kihestad 2 жыл бұрын

Hi, did you check out part 2? I have made a stop / lock nut for some of the moving parts.

@helder4u 2 жыл бұрын

@@kihestad nice to find your channel. I am eager to see part 2

@kihestad 2 жыл бұрын

Thanks you, part two is up and running, I hope you find it interesting 🙂

@perhennung 2 жыл бұрын

Very clever guy!

@kihestad 2 жыл бұрын

Well, if Lofoten says so it has to be true (btw: visited Svolvær this summer, had some great days) 😁

@yay4this Жыл бұрын

is that a video editing keyboard with the round knob/dial at 2:59 ?

@kihestad Жыл бұрын

Hi, yes it is. I have been using Davinci Resolve for editing all my videos for years now. The keyboard is the Davinci Resolve Speed Editor, it was bundled with the DR Studio version some years ago (i more or less got it for free 😁)