Building a Custom Board Games Workshop Wishes They Sold!

[@burrsd8276]

I love the Lasagne river flowing through the factory, perhaps Garfield runs the place.

[@radiumminis]

"I'm sorry Jon, but you will need to jump across the molten lasagna if you want to escape"

[@luclin92]

Oh that is just some chaos influence. Oh just adding a little chaos themed terrain and it's perfect

[@cupsofeagles1493]

Garfield as a tech-preist sounds horrific

[@carnut015]

@@cupsofeagles1493 Yes, but think of the lasagna-themed purity seals! Such fun could be had with an orange tabby cat deco, too. An Odie-themed army to oppose it would be a must, naturally, or perhaps a Nermal themed army, instead……. The possibilities are only limited by the player’s imagination.

[@bigceelos]

Zealot yellow speed paint over the lasagne would fix it

[@Tericho]

This is the silliest video I have seen on this channel. It made my whole day.

[@caveychip7]

Ay yo tericho that you?

[@tpmandy]

Still the most underrated 40k channel on KZbin. Great creativity, awesome on screen persona too. Wish you guys the best

[@RotomLandry]

I thought your paint job of the molten metal was amazing, but with the orange lighting during the glamour shots it was taken to the next level! Excellent job!

[@reca117]

I'm just imagining the molten liquid being a slow moving treadmill belt for ultimate immersion. Looks amazing guys! :D

[@andrewwrobel2786]

The narration/comments/drawing on this episode is pure gold...molten gold...

[@BigFrenchNose]

"Doing what I can with what I got." Was that a tremors reference? If so, I'll be taking my tremors miniature/diorama video to go, cheers!

[@derekbridgman176]

Can't belive they killed burt in the last one =[

[@ethaninch4707]

Me and my friends when we were younger would watch this movie once a week and then watched it like 8 times in one day.

[@demon1103]

@@derekbridgman176 they did WHAT!!!!!

[@darthdeadpool9802]

@@demon1103 yep he get eats by a grabiod in the last movie it really sucked

[@darthdeadpool9802]

God I love tremors

[@nidus8175]

Tremors is one of the most fun watches out there for a small group of friends on a Saturday night. Good memories of that film.

[@ViktorJ957]

Jay’s joke in the beginning and Nick’s face about it sent me into an asthma attack. Well done.

[@ViktorJ957]

I had to use a rescue inhaler. Now I have to back up to hear what Nick was saying, but since no permanent harm was done, no foul.

[@ViktorJ957]

I was also drinking when watching it too.

[@gigapuddi]

This is edited so incredibly well for the comedic effect. I love it

[@dominicsevilla1189]

4:06 Tremors 2 is probs my favorite of the franchise and that moment is probably the best moment from the movie!!!

[@capidano6248]

Killer board !! Looks like an amazing project! Lots of height variation ! Pieces of cover for interest , but nothing too crazy or cluttered ! Love to incorporate height like that into a fantasy board

[@Web-man_]

These are always my favourite videos I love watching jay and nick working together

[@rstarr14]

This is so well done, good Sir! And the way the catwalk goes off the board into the imagination, you can build a second one that connects, and a third, and such

[@Nigelius]

Middle Earth SBG has rules for leaping over gaps or climbing up vertical surfaces. You can only jump/climb a distance that is equal to or smaller than their move value. On a roll of 1 you fall and take damage equatable to one strength 2 hit for each inch of fall height that is higher than the mini is tall (stops minis killing themselves after falling off a small wall but can make falling off cliffs lethal). On a roll of 2-5 the leap/climb uses all the movement of the mini that turn. On a 6 you can use any remaking movement after making the leap. It allows for some pretty cinematic (and in some cases silly) gaming moments, there’s nothing like knocking an orc off a cliff!

[@elijahdprophet]

This video was great, nice concise editing showing the process without getting bogged down with the details too much, funny, and the finished product looks fantastic.

[@tubb9346]

“Doing what I can with what I got” -Burt Gummer, Tremors

[@nosywendigo592]

Excellent board. Funny sense of humor. And a great 3D printing design to go with!

[@eetennak966]

Love your videos. Seems like you are having fun, sharing a hobby, your love with us. One of the rarest types of KZbinrs! Keep it goiiiiiing

[@SalMi106]

This video is one of your best work so far! I love how it is cut together to create a nice narrative. Its always nice to see Nick in the videos!

[@mikewynne2127]

The board looks fantastic! Never been more convinced to buy a 3D printer!

[@radiumminis]

Do it!! You will have a cooler looking table then ever before.

[@MrSteelface96]

EoB, one of a few youtube channels i actually watch and not just use as background noice while painting.

[@stuartperry3761]

Absolutely brilliant work, it looks proper grim dark. Please do a Tau city diorama next.

[@leelinkman]

That is one of the coolest boards I've ever seen. Big props.

[@thedominator8093]

I would love to see a battle report on this board, it's so good !!

[@andrewpavone5429]

I only found your channel yesterday but I’m hooked! Every video has been informative and fun to watch - thank you very much!

[@timunderbakke8756]

This board is amazing. I’d be worried about the lack of LoS blocking with some armies but if it’s all for kill team I suppose that works. I’m definitely wishing I had the time to learn 3d printing because I know it’s more than plug and play. Maybe someday I’ll get to making a board but I tend to travel to friends places rather than host

[@Lyinginwait3]

We need a battle report on this board.

[@Mr-Man]

I think to tidy the board up you could you a bit of a sand and some filler, finishing that off with black paint. Board looks amazing with that terrain.

[@fallstar7013]

''Pizza protector'' looks just like the matting we use in pubs to stop the glasses being in direct contact with the shelves

[@treebongos4765]

I absolutely love this board! I'm not sure if anyone said this but if you wanted the molten metal to look a tad bit more realistic (in my opinion) you could add a gloss coat over the molten metal parts

[@MSnell]

That board came out amazing. It kinda makes me want to tackle something similar as a Sullust or Mustafar board for SW Legion.

[@maskedgymnast]

I'm a big fan of a long set up for a silly punchline! Good job, guys!

[@wilhelmnordenskjold6792]

This channel is growing fast! And it’s not a surprise this channel is one of the best!

[@saiancantin7667]

I would love to see a video on your ork killteam!😎

[@petermartin9224]

That is an epic board 😎 fantastic work. Also looks something right out of a first person shooter (and with a little bit more lava, Doom 2016) Your next game board challenge should be a full on 3D space Hulk type board 😈

[@40kpunk45]

Absolutely awesome… would LOVE to play KT on something like this. Epic.

[@paulthompson7361]

So, this is the first of a new series of these videos, right? A new Kill Team battle board for us all to drool over every week. I can’t wait 🤤. Keep up the excellent work

[@leafy126.5]

That transition is the best, new favourite wargaming youtuber

[@SacredRatchet]

That's an amazing board, now I need to see it get played on!

[@radiumminis]

Ya I can't wait to see a battle report with this setup!!

[@kiesarisunny13]

Imagine watching this channel from the start to now

[@fulcifan6946]

Looks great, however, I would use layers of tinted resin for the molten metal. You can use a hair dryer to create ripples or a resin brush. Use a torch or lighter to pop air bubbles. OSU 👊

[@thewizardmf175]

Great board! honestly been meaning to try my hand at a board myself a new project really let loose that creativity 👏 this is inspiring to want to finally take the plung

[@radiumminis]

Thankfully kill team boards are so much easier to approach then a full 40k table.

[@ono1381]

Loving Nick's haircut btw, very dapper

[@evaninski89]

Tremors truly is the greatest monster movie.

[@lawrencefurbish9167]

Great job Nick and Jay! Also one of the funniest videos you’ve made…thanks for all the fantastic content and inspiration from a quality team!! -Furb-

[@PelinalDidNothingWrong]

I would buy this in a heartbeat!

[@aerouge4492]

This video was an inspiration! Thank you guys!

[@FloppyOri]

When hot glueing foam together don’t touch the tip of the glue gun to the foam because that will melt it It should be okay if the glue gets on it because the glue itself is not hot enough to burn the foam

[@f0rth3l0v30fchr15t]

5:58 doing that when cooking is called "mis en place" (if you're that kind of nerd too), or just "being prepared".

[@sanguinius1284]

Blender is resourceful when you have many polygons.Meaning the more you feel the scene the more resources it needs to render ( not counting textures, motion or anytbing else) otherwise it's overall light to use.

[@radiumminis]

I do tend to cram a ton of detail into the pieces so blender can chug a bit if your setting up a whole tables worth of models at once. Good for printing though :)

[@RunningScaredMotionPictures]

I don't even play Warhammer but your videos are great and super entertaining!

[@marshallephisto6449]

Keep it up guys! This looks amazing! I know your channel is my favorite one because I keep watching and rewatching your videos 👌🏾

[@liqerise]

Beautiful board boys, can't wait to see the other 3D printable goodies you have in store for us

[@Mr_Pongo]

Awesome. Would love to see a battle report on this board!

[@Hobbyrepubliken]

More terrainbuilding and kitbashing please!

[@miniaturestash]

Amazing board guys great work! Looks like many epic battles will fought over your factory

[@BenjaminHillier]

What an epic build! Well done!

[@padfoot1178]

I really like this board if I was to make it myself the only diffrences I would make is adding a few more cover pieces and making the molten metal river out of apoxie resin and put a light under neath to give it a glow

[@tysonking7596]

I love how in this scene 2:51 The Third biggest ram gobbling App is Chrome

[@colbzdolbz7017]

Watching this with the after the salvation box terrain come out and playing on it a bit, that hazardous leap is quite similar to the jumping across terrain rule on that board.

[@Tmaxxnc]

gotta love that tremors quote

[@dr.sommercamp3435]

Yeah, Burt Gummer - Tremors 2!❤

[@scottcary9260]

Well played, for the algorithm

[@domoarigatomrrobot-oh6647]

Entertaining video and an amazing result! Bravo!

[@janviggoneubergjohansen]

Ok...The editing is AMASEBAWLS!!! Thank you for the best 3:29 minutes i've had i n a long time. You guys are awesome!!

[@tokiiiiz]

Nick man your slaying it with the humor 😆

[@user-kr8yh1lq5j]

awesome stuff guys. great inspo for my terrain painting

[@CrimsonMerchant155]

Love the videos keep it up! I also love your grand army of the republic logos on your apron

[@ZodiusXx]

I'd love for you to come back to this with some neon resin lava and LEDs, just in case you're looking for a relatively easy video idea Revisiting & Updating older projects is fun

[@mortisangelica]

Hope the pink panther keeps popping up

[@kingodacheez3416]

"Do the best you can, with what you got!" Burt Gummer from the 'Tremors' franchise.

[@tylerpeck9754]

wow! awesome job Jay! and Nick!!

[@CJFC]

I couldn't tell you the last time a youtube hobby video made me genuinely laugh out loud. Oh, wait, it was this one, right now.

[@janrei7292]

2:09 Hah a Classic. Well done.

[@JakeDogg-RIP]

This great video! I love digs at GW with 3D printing goodness! 😂🥰🐶❤️

[@paulofreire7520]

Awesome board, my man! 👍🏻

[@ono1381]

Love the molten mozzarella river

[@saucynaut]

Saucy painting!?

[@KabinMiniatures]

Woah. I would *love* to play on a board like that!

[@JohnnyRootbeer]

“Doing what I can with what I got” that’s Burt Gummer baby.

[@absolutelyloyalspacemarine1684]

I am hungry, I only see a huge pizza making furnace, but great work i really like it

[@DarthBoion]

Please yourself all you want James, that isht is hilarious!!!

[@matthewoconnor3196]

fantastic work! you make some top tier content, and I'm always excited when you post

[@MGC-XIII]

The editing in this video is on point! The penile joke really hit home xD

[@DtB171]

I enjoyed that video mate good work 👏

[@Chuckn0rris5555]

Ayyy that's a Tremors quote. I believe it's from Tremors 2 to be exact. (Tremors is my favorite movie/series)

[@Therealblacktux]

4:04 man really quoted Theodore Roosevelt

[@frogonket]

The buckets remind me of the droid factory in Star Wars episode 2

[@TylerProvick]

Where I'm from they just use a sheet of cardboard with the corrugating exposed for air circulation. Does the job without adding more plastic to the waste stream.

[@zipcc]

Please do more table ideas. I feel there is a lack of full tables out there to use for inspiration

[@ComicFreakification]

Love this board man awesome work as always

[@serse8455]

This video is so good, chapeau guys! (I feel bad for my cardboard terrain lol)

[@BurnsidesAP]

Nick! Thought I'd drop a comment to say the new hairstyle really suits you!

[@scottbeale1825]

that looks awesome!

[@alluraambrose2978]

Really need to get myself a printer, might inhale toxic fumes cause of lack of room, but worth it.

[@richardfriedli]

Pizza protector is great for mini chain link fence as well

[@EpicParsnips]

Honestly so bloody cool

[@Pyre001]

Be honest, how intentional was Pink Panther peeking from behind the second layer of foam?

[@Fernando-nd1hx]

aaah i want so much to make boards like this instead of the typical "4 ruined buildings and a couple of crates". Also, would you try to use resin for the molten lava river on that board or would you prefer to leave like it is right now?