Building a Ducati Scrambler in 10 Minutes

[@torrez2000]

Might you be able to share the make & model of the license plate mount you installed? I love it!

[@ChaosCarClub]

@@torrez2000 absolutely! Thanks for checking out the video. It’s a NRC piece… newragecycles.com/collections/ducati-scrambler-800-parts-accessories

[@CGCEifel]

Wow, that's exactly the look i would try to achieve for that bike too. Cops in germany would put me behind bars for the pipes alone. But hey, totally worth it.

[@ChaosCarClub]

CGCEifel hahahahaha definitely worth it!! Thanks so much for checking out the video

[@iainmatheson8989]

Great work on that bike guys!

[@ChaosCarClub]

Thank you so much! Always a fun process personalizing the bike to make it your own.

[@joaomunoz183]

Well, I prefer the bike the way it was before the transformation. The team work was the best. Thanks for sharing.

[@ChaosCarClub]

Appreciate you checking out the video! It has definitely been fun working on the bike together.

[@alejandrofernandez3235]

Greetings, excellent video, I have a 2016 Ducati Scrambler Pro and I want to eliminate the activated carbon deposit which you eliminate at minute 7:25 of the video, my question is. What should I do with the hoses? Thanks in advance, I'm from Caracas, Venezuela.

[@ChaosCarClub]

Thanks so much for watching! So cool you found the video from half way across the world 😎 I capped off the 1 hose and tucked them together on the side of the bike. Here is the original video giving more detail. Hopefully this helps… kzbin.info/www/bejne/moGkn4aHgsarnq8si=YaY6y0CENn5PPUcL

[@alejandrofernandez3235]

@@ChaosCarClub Thank you for your answer, it helps me, in my country that model was not sold and there are very few, in fact I only know of the existence of 3 so sometimes getting information is difficult, I'll watch the other video

[@ChaosCarClub]

@@alejandrofernandez3235 that’s really rare! I don’t see too many around my area but definitely more than 3. I bet you get a lot of attention riding around. People are probably so excited to see a scrambler!

[@Colsonsmusic151]

Hey what was the rubber you installed 9 min into the vid. I would like to do the same one mine. I also did most of what you guys did to my 2016 scrambler. Heated grips and a windscreen were the best bang for my buck making the bike a little more suited for longer rides.

[@ChaosCarClub]

Thanks for checking out the video! Heated grips is a great idea! That’s the worst part about riding in the winter. Even with insulated gloves it doesn’t take long to start losing feeling in your hands. We actually used a rubber U channel automotive trim around the tank edge to fill that gap. Picked it up at the local auto parts store.

[@richardflorentin9881]

Hello I am from france and I just watched your video on the transformation of the ducati scrambler, can you tell what type of joint you ask at the reserve level thanks for your help Beautiful realization

[@ChaosCarClub]

Thanks for checking out the video. I apologize but I’m not sure what you are asking. Would love to help but just not sure.

[@richardflorentin9881]

​@@ChaosCarClub Hello I would like the reference of the black seal that you used on the tank of the motorcycle sorry for my English Thank you Bonjour Je voudrai la référence du joint noir que vous utilisé sur le réservoir de la moto Désolé pour mon anglais Merci

[@ChaosCarClub]

@@richardflorentin9881 got it! I used an automotive black trim. Here is a link. I picked it up from the local auto parts store... cowlesproducts.com/store/EDGE-TRIM-c36935666

[@richardflorentin9881]

@@ChaosCarClub Great thanks a lot

[@LukeZegel-k3y]

Would really like black pipes and a nicer looking muffler. Was thinking it may be possible to ceramic paint the pipes

[@ChaosCarClub]

100% you can. That is exactly what we did. Bought the Dan Moto exhaust and had it coated. Bonus when having it ceramic coated is it helps with lowering temperatures too!

[@wilswood8137]

Nice exhaust, was there any remapping required? My Mrs has just bought this bike 👍🏼

[@ChaosCarClub]

@@wilswood8137 thanks! Yup it required a remap. We went with Rexxer Tuning. Mailed them the stock ECU and they map it and mail it back. Benefit is it takes some of the twitchy throttle away too. They are gonna love the bike. It’s so fun!! Congrats to them!

[@Xx__1]

Did you spray the exhaust? If so which kinda paint did you use?

[@ChaosCarClub]

@@Xx__1 thanks for watching! The exhaust is actually Jet Hot coated so not only looks good but reduces temps a little bit too

[@dahonu85]

I wouldn’t have removed the fork protectors. Might want to put those back on.

[@ChaosCarClub]

Yeah didn’t realize until recent what damage could be done without them. Thanks for the tip!

[@B3TOBETANZO]

Great video guys!!! Thanks for sharing!!! I’m picking up my scrambler too and already watching what to do with it... 👌🏼👌🏼👌🏼

[@ChaosCarClub]

You are going to love it! It’s a blast to ride and so much aftermarket support so customization is infinite.

[@flavioduarte7838]

Hi there !! Would you have a more detailed video of this job removing the EVAP? Min 7:15 - I would like to make the same with mine!!

[@ChaosCarClub]

I do! Check it out here... kzbin.info/www/bejne/moGkn4aHgsarnq8

[@baronbristow8764]

What did you use to seal the gap between tank panels and tank?

[@ChaosCarClub]

Thanks for checking out the video. We used rubber automotive trim. Hopefully this link works. We found it at the local auto parts store though... cowlesproducts.com/edge-trim-official/Cowles®-T5602-Black-U-Channel-Edge-Trim-18-Feet-p147363405/?amp

[@luisescarraman589]

I really enjoyed this video especially husband and wife working on the bike 🏍 awesomeness .

[@ChaosCarClub]

Thanks so much! It’s been so much fun getting to share the hobby.

[@SammyL0k]

thing is sick, what exhaust is that

[@ChaosCarClub]

thanks for showing some love! the exhaust is made by Dan Moto. we had it jet hot coated black to really set it apart

[@jeffgiles5297]

Loved watching your video. My last Duc was a S4R and now I'm considering a Scrambler for a more tame bike to enjoy since I'm older now. You really transformed the looks of the bike. I look forward to watching your other videos or inspiration!

[@ChaosCarClub]

Jeff Giles thank you so much for checking out the video. You will love the scrambler. It is so much fun and perfect for the street and light trails. Puts a smile on every ride!

[@damienkieran8905]

instablaster...

[@arthur4818]

I like the bike but you should put the fork tube protectors back on they protect the tubes from rocks damage also bugs will stick to your forks and when the fork slides up and down over the bugs it will cause your seals to leak and they don’t look to bad

[@ChaosCarClub]

Arthur thanks for the tip! I had thought about rocks before but never realized bugs could do just as much damage. I appreciate the good advice!

[@agencyarms2916]

Hi bro, how did the black exhaust come from?

[@ChaosCarClub]

Thanks for checking out the video. The exhaust is from Dan Moto and we actually had it Jet Hot coated (ceramic coating) the black color. Helps reduce heat and looks good too!

[@michalczajkowski8798]

hi, where did you buy these tank covers ?

[@ChaosCarClub]

Thanks for checking out the video. The tank covers are actually wrapped. We had a local shop take the stock ones and vinyl wrap them in a brushed black look.

[@michalczajkowski8798]

@@ChaosCarClub very clever

[@dwcubatch83]

you want it black, why didn’t you just get the icon dark model?

[@ChaosCarClub]

Unfortunately the only color choices for the 2016 were red or yellow. We have had the bike since launch.

[@AlbertoLopez-uz2mt]

Great video !! What’s the name of the seat ??

[@ChaosCarClub]

thank you so much for checking out the video. We used Ducati’s own version of the lowered seat. It looked good and provided just a little better fitting for a 5’6” rider. Here is a link... store.ducatiusa.com/c/scrambler_accessories_lowered-seat-scr

[@myriammercury]

Was the tank color change good after after a couple years? I’m also thinking of changing my yellow for black but wondered how it last. The bike looks great like that!

[@ChaosCarClub]

Yup we still have the black wrap on the bike and it has held up well. We go easy when washing the bike as to not lift any seams. Still looks just as good today as when we brought it home from the wrap shop 😎

[@mariakinsky]

Awesome!!!

[@RanjitKeshwala]

Hi what type of seat did you get ? Looks nice. I have the stock and it’s not too comfy

[@ChaosCarClub]

Thanks for checking out the video! It is the lowered seat offered by Ducati. Part #96880171A It helps my girlfriend out who rides as it allows her to reach the ground a bit better. So it retains a close look of the stock seat just a bit lower.

[@peterbarton2444]

Hi man, I’m in Australia and like what you did. What exhaust did you swap to

[@ChaosCarClub]

Thanks so much for checking out the video! Appreciate the kinds words too. The exhaust is from Dan Moto. Searching the internet I can’t seem to find anyone that carries this particular exhaust anymore. Forums say the pipe is universal so you could buy it for another model bike but I can’t personally vouch for that. I got mine directly from the Dan Moto website. My thought would be to contact them directly and see what they say.

[@Jonathan-Sund]

Get a TERMIGNONI, I got one on mine and it sounds absolutely awesome, like an old 900SS

[@dhavalmistry4570]

where did you find black exhaust ?

[@ChaosCarClub]

So we actually bought a Dan Moto slip-on which comes standard in just the raw metal silver and took it to Jet-Hot Coatings to have it ceramic coated black.

[@altimet123]

So you dont have to map the ECU after removing the entire original exhaust?

[@chevsovanrith]

Wow I really like this modification

[@ChaosCarClub]

Thanks so much!! 🙂

[@dillonrobinson8468]

Great job

[@ChaosCarClub]

Appreciate it!! 😎 thanks for checking out the video too

[@projectr5932]

Where did you get the gasket/rubber seal for the tank??

[@ChaosCarClub]

Thanks for checking out the video. We got the rubber automotive trim from the local auto parts store. It was similar to this… cowlesproducts.com/edge-trim-official/Cowles®-T5602-Black-U-Channel-Edge-Trim-18-Feet-p147363405/?amp

[@MrAriza08]

Nice Job!! Can you help me where you bought all the parts? I have an scrambler and I really like your work

[@ChaosCarClub]

Thanks!! Good choice. The scrambler is so much fun! Look into New Rage Cycles. They sell the light kit for both front and rear as well as make a nice fender eliminator kit which exposes the rear tire and relocates your license plate. If you end up putting exhaust on the bike I recommend Rexxer Tuning for the ECU reflash. Will help the bike run better after a more free flowing exhaust is added.

[@Dedicatedtoallhumanbeings]

How much to get the tank painted?

[@ChaosCarClub]

Thanks for watching! We actually had the bike wrapped black for a few hundred dollars. Didn't actually fully commit to painting it just yet.

[@imakegetsugatenshou]

What are you removing at 7:22? :)

[@kopatich100]

Топливный фильтр

[@ChaosCarClub]

Thanks for checking out the video. We are removing the Evap/Carbon Canister. It captures fuel vapors and returns them to the fuel tank instead of the atmosphere. It is an EPA regulatory thing. To us it was an eye sore :)

[@roel1962]

Hi, what type of buddyseat is that on your bike? Nice work!👍

[@ChaosCarClub]

Roel Kieft thank you for checking out the video. We used Ducati’s own version of the lowered seat. It looked good and provided just a little better fitting for a 5’6” rider. Here is a link. store.ducatiusa.com/c/scrambler_accessories_lowered-seat-scr

[@vagifkhamdoulaev9480]

Hi again! Please where you found the underseat plate holder? Thanks

[@ChaosCarClub]

Vagif Khamdoulaev got it from New Rage Cycles. The install was a bit of a pain. We have an install video on the channel to hopefully help if you end up purchasing. Here is the link for the kit... www.newragecycles.com/Ducati_Scrambler_Fender_Eliminator_Kit_p/icurb-wfe.htm

[@ulyelbori]

Question. Any issues after installing the exhaust? Like the engine stalling during during downshifting? I'm having that issue with mine. Thinking it might need to be tuned or mapped.

[@ChaosCarClub]

Ulises Lopez yeah highly recommend getting it tuned. We sent the ECU off to Rexxer Tuning as apparently the bike runs way too lean after putting any type of exhaust on. That should definitely fix your issue. Helps with the jerky throttle too.

[@millsguy121]

What seat is that?!

[@ChaosCarClub]

Thanks for watching! It’s the lowered seat offered by Ducati. Part number 96880171A

[@junjie2525]

I love this! Where did you get your front and rear signal lights from?

[@ChaosCarClub]

Appreciate you watching! Both front and rear signal lights came from New Rage Cycles newragecycles.com

[@junjie2525]

Thank you, now I'm itching to get my hands dirty with my Icon 800

[@ChaosCarClub]

@@junjie2525 luckily easy to work on and such a fun bike!!

[@vagifkhamdoulaev9480]

Hi! Nice video! Does the full throttle version seat fits on this bike? Thanks

[@ChaosCarClub]

Vagif Khamdoulaev thank you for checking out the video! Yeah all the different variants are interchangeable. Makes for nice customization!

[@mehh9578]

Great video

[@ChaosCarClub]

Thanks so much!!

[@christophermichael.w.7577]

I have thought about getting a sixty two and upgrading it with desert sled parts.I like the high front fender on the sled.If I had the money I'd buy a new silver and blue sled but 12 GA is not affordable for me right now.

[@ChaosCarClub]

Yeah unfortunately it’s a big gap price wise from 62 to desert sled. That’s why I went with base model myself. Definitely like your idea of starting with the 62 and adding features from sled. More unique that way too!

[@xmrxromeo8879]

What’s year is the bike?

[@ChaosCarClub]

xMRx Romeo it’s a 2016 model.

[@bundunett3212]

should put a little chrome shorty mudguard up front :)

[@ChaosCarClub]

Iike the idea of a shorty guard but maybe carbon to match the darker look

[@bundunett3212]

@@ChaosCarClub gotta have some bling :) ... nice job all round. I just like chrome LOL - angle grinder on the original :)

[@ChaosCarClub]

@@bundunett3212 hahahahaha ain’t nothing wrong with that! Especially when it’s nice and clean. Can’t beat the shine!

[@riclozano2784]

I love the transformation 🤙😍😎🇺🇸

[@ChaosCarClub]

Much appreciated!! 😎

[@dwcubatch83]

what’s her height? my wife is scared she might not flat foot the icon..

[@ChaosCarClub]

She is 5’6”. We got the lower seat and that has really helped her feel more comfortable on the bike

[@KNAutoCare]

Great to see this video,to me it will be more perfect if u change another handling bar by a lower one

[@ChaosCarClub]

thanks for checking out the video! agree 100% I think the lower bars like the ones on the full throttle version would look amazing. just haven't got around to it yet.

[@Tym0nn]

Where did you get all the parts?

[@ChaosCarClub]

Tymon Roest thanks for checking out the video. I got most of the parts from the manufacturers respective websites. Some of the products used were Dan Moto exhaust, CRG arrow bar end mirrors, New Rage Cycles front and rear lights and tail tidy/fender eliminator.

[@DannyLe808]

Whoa. Nice transformation. How tall is your wife? Mine is about 5’5 looking to buy a cafe racer but can she flat foot? Thanks

[@ChaosCarClub]

Thanks so much for checking out the video. She is 5’6 and we swapped the seat to help her touch the ground. She isn’t quite able to flat foot but is stable enough on the balls of her feet.

[@jaewardtattoo]

Should paint the bars, I got good results with rattle can primer and satin black

[@ChaosCarClub]

jaewardtattoo hmm never thought about that. Would definitely look better black vs silver. Thanks!!

[@lorenzovivaldi7036]

Hi, good job! Could you please tell me how many hours it took to tune it and how much it cost?

[@ChaosCarClub]

Lorenzo Vivaldi thank you! We mailed the stock ECU to Rexxer Tuning for $320 and it took around 2 weeks total between us mailing it to Rexxer and them tuning it and sending it back.

[@riclozano2784]

Cool 🤙😎🇺🇸

[@Wesleycreardon]

Loving the hurricanes shirt. I too want to get a scrambler and fix it up at some point

[@ChaosCarClub]

Go Canes! You will love the scrambler. Such a fun bike and easily customizable!

[@RiyanDinata]

Wow... 👍🏻👍🏻

[@ChaosCarClub]

Thanks for checking out the video and showing some love! Much appreciated!!

[@sneakerjoe23]

Wow crazy she started on an 800

[@ChaosCarClub]

sneakerjoe23 yeah she has done well with it. A starter bike really depends on the rider.

[@sneakerjoe23]

Chaos Car Club absolutely! If you ain’t trying to show off and you get taught good clutch control, you can start on nearly anything

[@alic1726]

Omg I love it!! Can you come to the UK and do that to mine please?! Lol

[@ChaosCarClub]

Ali C Bahahahahaha. Road trip!! 🙂 thank you so much for checking out the video!

[@alic1726]

Chaos Car Club you’re welcome!! Gave me inspiration... just wish I knew how to do this stuff!!

[@ChaosCarClub]

Ali C honestly we had no idea what we were doing either. Learning as we go. 🙂 I figure anything we mess up someone can always come in and fix after. Luckily we accomplished everything so far without too much headache.

[@antoninoglorioso3932]

A prescindere che è una bella moto, uguale alla mia, tu sei molto in gamba, ma in Italia non passerebbe la revisione!! Comunque complimenti e buona strada sempre 🤙🤙🤙🤙

[@ChaosCarClub]

Molto apprezzato! 😎

[@dunstanhawk7367]

Great video guys. Sweet looking bike and great sound! You’ve done a cracking job on it. I think I must go outside and take all the sticker off mine. I hadn’t really noticed them until I saw how much better yours looks without them!

[@ChaosCarClub]

Thanks so much for the kind words! It’s crazy how something so subtle, like the stickers, can make a big difference!

[@YA-ee9zf]

the beard needs customisation

[@mohammedag7645]

I really wanna get a sccrambler

[@ChaosCarClub]

Such a fun bike!! Guaranteed to make ya smile

[@mohammedag7645]

It makes me smile everytime I watch a vidoe of it, and the sound i really love it. its my dream bike man one day hopefully Ill be able to get it

[@PlagijatFalsifikata]

Congratulations! You have totally managed to ruin such a beautiful bike.

[@ChaosCarClub]

Thanks? 😂 to each their own. We love it! That’s what makes the world go round though. Everyone has different tastes. I appreciate you checking out the video. 😎

[@warmachinebodybuilding]

Beautiful channel, very nice video and super like.. Subscribed to your channel by Warmachine bodybuilding of garage Gym italy

[@ChaosCarClub]

WarMachine Bodybuilding thank you so much! Appreciate the support. Will check out your channel too. thanks again!

[@abhinavkumar5928]

Beauty bt i cant afford

[@ChaosCarClub]

Abhinav kumar thank you! Maybe not right now but set your goal and you will succeed!

[@Kiteholic]

handlebar bro

[@ChaosCarClub]

Playa Del Carmen Kiteboarding want to get the full throttle bars

[@katherineguarachi5875]

Me la regalas👌

[@ChaosCarClub]

Katherine Guarachi thank you for checking out the video 👍

[@stelapaya]

Sorry - but I think the original looked so much nicer!

[@ChaosCarClub]

@@stelapaya all good! Thanks for checking out the video. And that’s the beauty of modifying vehicles…. Everyone builds them to their taste. Variety is the spice of life!

[@leeandjancruise]

Totally pointless exercise, looked good as it was.

[@ChaosCarClub]

Variety is the spice of life 🙂 I appreciate you watching!

[@michaelwerner3376]

😢how awfull...

[@ChaosCarClub]

Awful? Different tastes make the world go round 🙂 thanks for watching even if you aren’t a fan of the outcome!

[@cmlee5577]

Where did you purchase the fuel tank molding?

[@ChaosCarClub]

Thanks for checking out the video. We grabbed some automotive rubber trim molding from the local auto parts store to line the fuel tank. They should have it in stock at any of the usual places: autozone, advanced, oreillys