Building A FOLDING VAN TABLE With STORAGE, Part 1 | Ep 22 | Nissan NV200 Camper Van Build

[@traceyhamston9418]

Having watched so many van conversion videos, this is far and away the best with really useful detail and great carpentry -truly inspiring. I'm hoping to adapt to my much smaller berlingo!

[@LensOfJames]

Thanks! Good luck with your Berlingo conversion 🚐

[@traceyhamston9418]

@@LensOfJames thanks. Have done the pull out bed but love your cupboard and table. Just looking for a suitable portable battery pack as we found we need this after testing the van on a recent trip to Spain.

[@ethanesmith]

Nice build. The use of that 90-degree angle-iron as a straight edge is brilliant!

[@LensOfJames]

Thanks Ethan!

[@jimsmith3971]

Like a gift from the universe, KZbin recommended your channel. Thank you for the content. It's given me the support I've needed. Just finished insulating and plying my Vauxhall Vivaro swb high top. Made the unit for the fridge and wood burner. Walnut veneer ordered. Next job is designing the sofa bed.

[@cathysupp9493]

I work the same way- Do Re-do 3 times a charm!

[@koenverscheure6153]

Its a piece of art!! Well done sir!

[@LensOfJames]

Thank you! 🙏

[@andrewmcphee8965]

Brilliant channel mate! Giving the lots of ideas for my dream van build. Cheers from Australia!

[@hopeheavenonplanetearth1417]

I am sooooo impressed on your work. I found you a few days ago. I look forward to catching up on your series on the NV200. I love mine and may redesign it after watching your videos! Thanks 🙏

[@100bodhi]

This is really helpful, thanks and great channel. I had quite literally finished my bed build, very similar to yours but just double. I was thinking about how to make a pull down table and here it is 🤙🏻I'm also a surfer but the board lives above me at night time. By the way, I've only had my van about 5 weeks and found out I had to change my insurance when I added the bed to a motorcaravan. Glad I checked.

[@mark.e.p]

Smart, exactly my idea to get maximum bed width. Thank you.

[@LensOfJames]

Thanks Mark!

[@graya44]

.. what 👀👏👏👏 outstanding James 💪👍🤙🏄🏻‍♂️

[@LensOfJames]

Thanks Gray! 😀

[@LensOfJames]

Check out part 2 of this folding can table build here: kzbin.info/www/bejne/oKLVY6Zjmd6hkLM 🚐 🔥 Want to see more from my *Nissan NV200 Micro Camper Van Conversion Series* ? Check out the entire build here: kzbin.info/www/bejne/inesnIRtmNGqjas 🔥

[@lindsayyoung8879]

As always, your Videos are so clear and easy to follow. Gives me great ideas for my own build!

[@mingueyox]

great idea💡 , superb job 👍

[@EdTurner.]

Someone is getting proficient on the tools ? Super job, i think you will start using the router for more and more tasks once you gather many cutters, i.e cutting the table out and sinking the hinge, the space between new shelf and back doors is bigger than you think it will be perfect for a spice rack shelf or 2 with 3mm bungee cord strung a few times on the front you could even screw jar lids to the bottom for hanging jars. I went out early this morning for a couple of hours with the dog and cooked breakfast and coffee once back to the NV. Ed

[@LensOfJames]

Thanks Ed, great ideas! Glad you're getting out in your NV!

[@andyh126]

Excellent work and attention to detail is admirable. Can only echo the positive comments of others. Having used this for a year now - are there any changes you would make or features you would add?

[@BradAnkenman]

Exactly what I’m looking for. I would love to have plans for this build. Any thoughts on publishing plans and templates?

[@LensOfJames]

Hi Brad, I don't really have any plans other than what's in the video (the rest is in my head) but I will be doing a written blog post on it in the future. My blog can be found here: nv200vanconversion.wordpress.com/. Cheers, James

[@blownnugget]

Now we are talking !

[@mikaili3188]

Very cool, the caport look multi functional. What you have down under there?

[@EM_LY304]

I've watched all your videos, and have been really digging into the design of my NV200 camper build. I have a plan mocked up in CAD and sketchup. I'm so impressed with the cabinet design. The part that intimidates me the most is building cabinets to fit the shape of the van. Would you be willing to share or sell your sketchup file of the cabinet? Thanks for considering!

[@LensOfJames]

Hi Emily, thanks! My SketchUp design was mainly for the dimensions of the cabinet and the side parts which fit the shape of the van were more of an estimation. The fit of the cabinet in my van is by no means perfect, but making a cardboard template was definitely the way to go!

[@EM_LY304]

@@LensOfJames I just got some big boxes from a friend: ) thanks!

[@trucnuch92]

Hi James, I probably something but could you detail where do you srew your M6 screw to hold the table against the wall. Does the the thread hole where already in the van or did add some anchorage ? Thanks in advance Later add: I found the answer in your old table video ! thanks

[@Thorsten89342]

Brilliant work, thank you. Can you tell me what portable charger you are using please, I really like the look of it.

[@LensOfJames]

Thanks! It's a Novoo portable battery power pack, link to it in the description

[@rayc1503]

Hi thanks for putting in the time to make these videos. I wanted to know if there's anyway of putting 3 metre bundles of copper pipe flat into this can without having to put them onto the dashboard itself. My colleague has a bulkhead in his but would be willing to cut it. The Pipe tube was stolen off the top of his van along with about £200 worth of pipe. Thanks

[@LensOfJames]

Hi Ray, thanks and sorry to hear about the theft. I've got a dimensions video here: kzbin.info/www/bejne/eXvIaaOddrCqrtk. I'm not sure you'll get 3 metres inside the van without it going on the dash. My surfboard is 9'5" and there's only about an inch to spare, though it's a lot bulkier than pipe so you may be able to find a few extra inches by moving them around. Sorry I can't be more definitive with an answer, but hope it helps!

[@rayc1503]

@@LensOfJames thank's for that, I'll watch it now 👍.

[@carlosprietojimenez3629]

hi you focus quite a lot on the design but i wonder since i have the same van, where do you screw the whole structure to the van? do you screw on the metal of the van?

[@LensOfJames]

Hi, there are 5 built-in screw threads in the walls of the van which I used - I go into it in more details in this video: kzbin.info/www/bejne/mXuqi4CjjpWmrK8

[@carlosprietojimenez3629]

@@LensOfJames thank you so much really helpful ! :)

[@igorschmidlapp6987]

Wasted time/effort/material on the table when a single piece of birch plywood cut to size does the job.

[@LensOfJames]

Not really, because a sheet of ply is difficult to transport in a small van, the pineboard can be bought in a number of sizes that suits your project (meaning less cuts to make and less wastage), is lighter than quality plywood (important for a van build), is easy to source for me (unlike quality ply). I've done a 'single piece of ply table' (see my earlier video) and it looked basic. I'm very pleased with my new table build - no regrets with this upgrade!

[@vasquez1024]

Hey nice build. Are you selling the wall table unit or can you make me one?

[@LensOfJames]

Thanks, unfortunately I don't sell and I only made this one around my full time job, sorry!