Building A Multi Use Farm ATV Trailer From Scratch || Making Life A Little Easier

In this video we attempt to build a ATV ( QUAD ) accessory that can do three things hopefully fairly well, anyone can do this and it's very worth while to give it a go. I've always enjoyed doing this kind of thing even if i get it wrong, which happens a lot!
Hope you enjoy and thanks for watching
IFarm WeFarm Merchandise check out our store right here
ifarmwefarm.store
Check out our Website ifarmwefarm.com
Follow us on
Instagram: / ifarmwefarm80
Facebook: / ifarm-wefarm-101507381...
For all the in between stuff
Check out our Amazon store front for a list of some of the things we use to make these videos and find generally useful.
Check it out here www.amazon.co....
If you'd like to Donate to the Channel you can do so here " Thank You ''
Paypal paypal.me/IFar...
License ID: Q6XO97gPl7v lickd.lnk.to/C...

[@Open2OpenUT]

You never cease to amaze me with your talent for making things. That’s a handy bit of kit you’re after making, Well done Adrian. 👏👏👏👏

[@CB-xr1eg]

Aye you're right, it's shocking handy and no mistake!😂

[@James_Smith715]

Anytime I watch farming videos on KZbin nowadays it’s usually people sitting on tractors talking for 20-30 mins about tractors! But this channel is a breath of fresh air, hands on approach where you never know what he’s going to do next. Your a credit to the farming world Adrian

[@patriciamccormack7626Teashee]

Fantastic job Adrian 👍🏆 I hope they show your videos in schools and colleges to teach young people how to improvise, recycle and still end up with a lovely piece of multi purpose equipment👍❤

[@johnnolan2222]

what is a Bait Point and why do you have 3 of them? (refer to 12:32 of todays video for clarification)....

[@ewilliams6839]

Well Adrian great job on the trailer well finished. What you should think of doing is make the boom brackets quick fit. Two bit of box on the back with smaller box frame slot in and out save opening them nuts on the boom every time. Then you could have other attachments with same idea of fitting on the back 👍

[@stephenkelly2067]

Your Sunday video are best content on KZbin fantastic trailer have notion building one but yours gas alot better ideas than what I was for doing. So thanks. Be very handy for bin collection out to road also

[@megafabltd]

Great stuff Adrian. Thanks for showing the storage box. Getting enquiries already for them 🙂👍 Michael

[@johnlydon533]

Great fabrication job Adrian. Well done, great multi use. Enjoyed watching. 👍🏼👍🏼

[@donalfinn4205]

Very well done to you. Is there anything you CANT do?😀Two things. That workshop bench can’t be real? No matter how I try, I cannot keep mine free! And Adrian, can you not do something about the gap on one side of the roller door🤷‍♂️? I have to look away every time I see it!😂

[@haggielady]

Might I give you some unasked for advice? Teach the girls! My Dad made me learn when I was young and all he taught me has stayed in my brain. Welding, carpentry, car mechanics, etc. It's saved me thousands of dollars and gotten me out of trouble many a time. I did not want to be doing those things at ten years old but now I've got all those precious memories of time with my Dad.

[@richardparkinson8651]

I could see other quad owners making multi purpose trailers like yours, do you have a patent pending for your design 😄

[@CyrilMorrin]

You should enter this into a Farmer's Journal/Farmers Weekly/Farmers Guardian machinery design/construction competition....

[@mandyrobinson8353]

So it’s not going to be a mobile Jacuzzi/Hot Tub then Adrain 😂😂😂

[@noahstewart4682]

If u push the welder torch instead of pulling it it will leave a nicer and stronger weld because your pushing away from the heat. But tidy job done👍

[@conorm2761]

Makes no sense

[@williecosgrove]

11,01 dont mind that rattle can shite 1 coat of black HAMMERITE paint with the brush .Job done

[@patdonnelly4803]

Grand job but 1 suggestion is to put a flap between the spraybar and wheels, becauuuuuse if there's drift coming towards the wheels you won't want spray on the wheels, happened me years ago with a ride on lawn mower and I destroyed the grounds I was cutting😂 there was tracks up and down the grass of dead grass, oops

[@goldenlabradorskye]

I would patent that machine .......will be copied by someone lol. Brilliant....Well done

[@Shane_O]

Nice work. I do enjoy the making part of your videos. I do a lot of similar work myself, so great to get a few ideas.

[@DEEREMAN]

Great video Adrian 👍🏻, just curious where u got those magnetic clamps from

[@WhataTry]

Well done, great video, go raibh maith agat!

[@alanlanghorn9528]

Good job but hope you re pack your wheel bearings as the hubs would got hot from the welding .

[@IFarmWeFarm]

That’s a good point, I had a little sprayer with me full of water that I sprayed onto the hub every few seconds. You can see it in the background around 1.00 or so. Otherwise yes could could burn out the outer seals for sure

[@davidlittle256]

Great video as always, always learn so much.

[@CiaraWhite-n6s]

Wow what a great pare of hands you have…. Great video keep up the good work

[@gregphillips24]

This is not a criticism just a concern and maybe I have missed something and it's not a concern at all.When you are using the sprayer and you have connected the electrical cable from the right hand side of the quad to rhe sprayer and you turn left isn't the cable going to be over stretched in it's present fitment.

[@IFarmWeFarm]

Your 100% Greg, with that wire the first thing I did was put it in a full left side lock to see there was enough wire. A good point though and can be easily over looked like I did several times in the past 😉

[@gerryoconnor8751]

Brilliant job Adrian, give up the cows and start up an Engerining firm. You could make a Fortune.

[@Joe-ud2hb]

A few reusable cable ties are handy for tying up the Sprayer hose - great video

[@scootytamra]

Adrian, you are a talented man! I'm always amazed at the things you build and think up! ❤❤❤❤

[@dieselbushcraft1299]

There’s a saying that I have heard and I think it fits nicely for this. “Necessity is the mother of invention”. It’s a brilliant bit of kit.

[@CB-xr1eg]

I think it's the mother "OF" invention tbh.

[@dieselbushcraft1299]

@@CB-xr1eg well spotted buddy, autocorrect or fat fingers. Cheers

[@martinwalsh5209]

Nice job Adrian, simple idea, well executed, another great video 👍

[@Jeff-bg7pt]

Can you build a go-cart with a honda engine please next..

[@IFarmWeFarm]

I built one last year but didn’t film it, thinking of starting a new channel to build stuff that’s not farming related. We’ll see how it goes 👍

[@simonbuggles431]

Cheers Adrian, wife has just watched this with me, more jobs on my to do list 🤦

[@banjoboy8802]

You never fail to amaze me Adrian. What a cleaver man you are what with splashing paint on black plastic to scare off the crows, restoring a hedge trimmer, old Fergie tractor this multi purpose trailer platform and all the other projects you have in hand. The good Lord blessed you with many talents. The question I have is why does it seem you never complete a project before starting a new one? Not that I am criticizing or complaining just observing.

[@noelwalsh4205]

Brillant job and always thinking outside d box lad

[@garethbryson]

great wee article. I think I'd try and get some sort of mud guard on it. it'll get serious dirty.

[@KiwiJim13]

👀🙄🐾👍The trailer looks very handy Adrian

[@karloarsch1579]

I have a similar problem with my glasses, but I've learned something now. Before I search my whole house, I check my forehead.

[@mathewdavies1931]

Brilliant bit of kit will you be putting mudguards on it

[@jimmy.....9446]

Very tasty work 👏👏👏

[@tedcrilly8990]

This is why I subscribe, love your wee projects! So down to earth, reusing bits of steel like the real world. That’s a great multi purpose sprayer, well done on a tidy job :)

[@ParadiseBlue1866]

My father, a retired farmer, always said country folk think differently from city folk. It’s great to see it applies across the globe. You make do with what you’ve got and improvise if you haven’t.

[@paulmccabe9117]

The wee trailer definitely looks the part, just like yourself Adrian she’s a multi jobing, I think the yellow & green paint 🎨 job would of looked well…😎

[@everestyeti]

Brilliant little multi purpose trailer, your welding skills are par excellence! Pity you don't have an electric powered spreader, something you could also use the trailer for, you wouldn't have to worry about a geared rear axle. I have seen them but not sure if they are worth the money or indeed the effort as the bin size appear to be limited. However with your skills however, might be something you could build yourself. 👍

[@sandymcghee3328]

Great video it is a nice bit of kit there Adrian 👍👍👍

[@cheekymonkey666]

something else id do to that trailer... ADD a small vice... the times ive needed a vice when something breaks in middle of no where this would be a good addition.

[@Canningfarms]

Absolutely brilliant idea takes the weight off the quad completely great job 👏

[@ciaranconeely8579]

The Concorde had a maximum cruising speed of 2,179 km (1,354 miles) per hour, or Mach 2.04 (more than twice the speed of sound) after getting a pull start from a Massey Ferguson 135. I recon we're on track to reach Mach 3 with this baby on the Quad when the button is pressed 😂😂😂😂😂😂.

[@johnlee3734]

What is your welder Adrian good our bad .I wonder did you make it harder for spot spraying having the tank that far back from the quad 😊

[@traceyhacking7109]

You're an Irish Mc Guyver!!

[@AD-hs2bq]

You love building stuff, obviously. Lucky for you to have those opportunities. Great work!

[@michaelstaunton1632]

That’s a mighty job altogether so so handy fair play to ya 💪💪💪

[@pauliinndaly3586]

Adrian,your one man for some man,that is some peace of kit great job 👏 👏👏

[@johnmcgookin4141]

Just a suggestion I made a modification to my quad sprayer put a 12 solenoid valve on pipe out to boom and wired it to the tail light so when you switch lights on boom starts to spray the switch is on your thumb dead handy for turning etc also you can leave the pump on and system pressurised so you can use the lance with out having to manually close a valve to the boom

[@conorlangford3588]

The reason quads dont have a trailer plug is most quads arent registered so arent legal to be used on the roads. I made up an adapter for mine for the trailer to give lights only. 3 pin to female 7 pin trailer

[@kateyilmaz1536]

Adrian you need a few more brackets on the front and then you have somewhere to hold your plastic posts / pigtails horizontally. Great job, you’ll be dying to get out and do a bit of fencing and try her out 👍🏼👏🏼👏🏼👏🏼

[@lindaarmstrongjackman9788]

Wow. Great job of that little trailer. 👏🏼👏🏼👏🏼 I am sure you will find even more uses for it. You are craftsman and so creative. Cheers! 😊👍👍

[@robertdonnelly385]

green with yellow wheels would of looked the part adrian 👌😂

[@moodogtizer5884]

Try and stand to the left of what you are welding as you can see better. Weld in straight lines as that will give better penetration than weaving the lance about like a amateur

[@cheekymonkey666]

get one of them small car jacks and use that to keep the hitch off the ground... come in handy does small car jacks

[@errolgregory422]

Great work Adrian. I wondered at the time when you installed your workshop roller door, what you were going to do about the gap where the door meets the concrete floor?

[@errolgregory422]

And just wondering how you are going to keep it from getting absolutely covered in muck from the quad wheels? Mud flaps right to the ground perhaps? See them quite often on dairy farm quads.

[@phil6465]

Could you move the uprights to the corners? Then they could be braced from the axle direction. And leave better access to lift on the big box.🤔

[@robdixon945]

Thanks for the show Adrian

[@davidhutchinson5973]

Great job! If you're adjusting the sprayer brackets again could you do them that when you take the boom off they come off with it? Just thinking you'd be less likely to catch on them when using it for other jobs.

[@IFarmWeFarm]

Yes I think that would be a better job, maybe a bit of box iron with bolts welded to it so you can slide it in and just tighten the bolts if you get me

[@davidhutchinson5973]

@@IFarmWeFarm yeah be perfect that!

[@Silvermoonhomestead]

You blow me away with almost every video.

[@robertrenwick4951]

You're a good engineer as well as a good farmer Adrian. Well done, I always look forward to your videos.

[@Gearoid35]

Nice tasty job don't forget the mud guards

[@richardparkinson8651]

Fair play to you on making that mighty trailer, the way you have for welding angle iron makes strong joints.

[@cheekymonkey666]

you getting better at welding nice job on the trailer... the reason they dont come standard with indicators is because it increases the cost... also most quad bikes cannot be used on the road because they do not meet road safety standards. so from a £12,000 quad it could go up as far as £2,000 more to get it road legal. but i do like the 3 pin plug i might do the same to ours when they get here, i just ordered 2 new king quad 750

[@justinglenn1844]

Great video Adrian ,what brand of trousers are you wearing,thanks

[@sarahjines7791]

You are amazing!

[@marcusd2380]

It could be that good u wished u had galvanised it

[@Robbiebob61]

That is so bloody clever!!! 👏👏👏

[@salmonhunter7414]

Fancy . Looks great!

[@danielcunningham5052]

Built not bought, your a dying breed aidrean, very well done.

[@scottsorby7966]

Adrian, all your other interesting videos aside, it's this kind of project that makes your channel so good.

[@TB-nh4dg]

Brilliant, love a bit of fabrication. Q the music!

[@Joses337]

Are ye going to the ploughing

[@emyrrees4100]

Brilliant video. Very handy piece of kit. Only thing I want to add would be is I think you’d need mud guards fitted so it doesn’t spray mud up and foul the outlets of the sprayer.

[@IFarmWeFarm]

Yes going to fit them this week. Badly needed

[@joepowdely]

Great video Adrian it's a handy little trailer you could fit a reeler for running out water pipe electric cable etc . Best of luck with the 50 B there was quite a few of them about this area I know of two of them still in use on two farms locally both in very good nick if you are ever around Ardee /Dunleer area I'm sure both lads would give you the short cuts on maintaining them

[@markphilpott9531]

Mighty stuff Adrian 👍

[@ianhaggart1438]

Now iv said it before and I'll say it again in Hannibal best line.. I love it when Plan For Scrap Comes together 😅... fair play to seeing potential in anything that might be useful... Mind you does that make you a Hoarder as well 🤪😆.. stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@shaneprior]

I have said it before, your some man for one man, mighty bit of work, keep at her Lad!

[@TrevorByrne-yh1fp]

Fantastic job Adrian well done

[@garymadden2656]

Great video Adrian 💪👌

[@philipgraham6980]

Very usefull trailer for the quad, think you should run the wire between the quad and trailer along the drawbar, that way it will not get stretched or broken when you turn.

[@seancasement2106]

How about the resin board for the floor?

[@paddy294]

Looks a fine job Adrian

[@MichaelFlynn-p9c]

Great video, Adrian .thanks

[@ronaldlucas5360]

You make different items and make it seem easy.

[@bertoltb1358]

A good job well done. Looking forward to seeing it in action in future videos.

[@DOGSARETHEBEST.]

I'm sure I've said this before, many times Adrian. You're an inspiration 😊. Great video. All I need now is a welder, some steel, paint, tyres, a boom, mud guards, nuts & bolts etc..... and an A.T.V. of course and I'm away 😂.

[@BestUserNameUK]

Have a look at 'Tractol' paint... Sold by Clarkes of Cavan. Just painted my metal garage door in Massey Ferguson red. Greetings from Co. Longford👍🏼

[@nigelmchugh5541]

You could make the boom "quick attach" using four tail-board catches..... Especially if you change the upright pieces to angle iron.

[@aaronlawler3491]

A tip for you if you are ever putting in a steel floor in any sort of a trailer wearer it’s a bale trailer or cattle trailer or anything on all the beams it will be sitting on tec7 it down and then weld it on top and it will stop all rattling or banging off the center beams we have done this on a bale trailer and there is no noise of it at all

[@aaronlawler3491]

And also be very generous with how much Tec7 you use

[@noodles8203]

Whats the stuff you're spraying?

[@user-lz8jx7vw3u]

Adrian build it one and do it Wright it will last a lifetime

[@BillCrawford-q9m]

Does the tipsy meal bin fit on it

[@shirleysousa1133]

The finish job looks amazing as if you bought it completed.

[@DeirdreHickey-nx8nt]

Well done Adrian, very good at making that frame. 👏🏼👏🏼👏🏼👏🏼🥰🥰🥰🥰

[@TheTorkerman]

That’s a proper smart little trailer👍🏼 here in Australia a good quality ATV utility trailer will run you about $3000. This is FAR better .

[@tessaelvan5149]

great idea, i did the same as you for the wire on a much smaller scale and very light duty. it was good seeing it all ready to be used. thank you