building a new 1967 mustang and how to register it and what you can expect to pay

[@Memesmadnesslab]

Dude Im 18 years old and have been into cars from the time I was 10. Good job explaining everything out most don’t take the time too. Specifically about how to actually put your project on the road ❤❤

[@anthonyhendricks7377]

Unbelievable video!! You make this look so easy. My son and I are both studying your build.

[@solutionsdassurance9972]

My mind just whent "pooff" I did not know that this could be purchase and built as a project. I have already started looking at your videos for a few hours now. Amazing and very well explaned. Good work. Now back to the video.

[@1194video]

@@solutionsdassurance9972 thank you for taking the time to watch my channel, enjoy!!!

[@billverine765]

Amazing work my friend, and thanks for sharing the entire process. You are a skilled craftsmen of the old school variety.

[@1194video]

Thank you very much!

[@johnny.d.1930]

​@1194video How many hours do you have into assembling the body? What suspension are you using?

[@Braveheart7914-idfl]

Fascinating brand new mustang no rust ! 🙏🏻👍🏻😉🇬🇧

[@ΑργυρηςΚαραπετσας]

Greetings from Greece, you have done a tremendous job on this project!

[@bahaalqedrah5777]

“Wow, I just discovered your fantastic KZbin channel about building a car, and I’m absolutely amazed by your work! It’s so inspiring and has me dreaming of starting my own project someday. Unfortunately, where I live, getting a VIN number for such a project is a challenge, but watching your videos gives me hope and ideas. Keep up the incredible work-you’ve gained a new fan!”

[@1194video]

@bahaalqedrah5777 glad to have you as a fan!

[@terryboehler5752]

Looking good. Check out 3M Weld Thru Coating. Spray can. Then weld. Stops the unreachable parts starting to rust after the welding

[@1194video]

i used 3m weld through primer from o Reilly

[@Gurn-xh5fg]

Many states have provisions for creating and assigning a VIN or serial number, for home-built cars.

[@lhkraut]

New subscriber here. I am still in shock watching you build this car! You really do make it look easy. I look forward to watching your other videos. Now I have to find a place to hide while I binge watch! Merry Christmas!

[@1194video]

@@lhkraut Merry Christmas to you and yours!!! Thank you for the sub!

[@AlexandrOakway]

Hello from Russia, you are so lucky it is possible to just register a new self build car in us like that, in Russia it's almost impossible

[@Gurn-xh5fg]

The applicable laws and policies vary from state to state, but there can be some MAJOR legal challenges to trying to register a home-built car like that.

[@shorty______]

​@@Gurn-xh5fgYeah, for sure. I'm from Argentina and over here it's impossible too. Or at least you need so much paperwork, engineering certificates, tests, and $ to be paid that's virtually impossible. Also, doing things like fabricating my own front suspension (either lowered or offroad) it's not easy to make it legal

[@jimbob8969]

Best way is buy a beat to shit 1967 and “restore” it. 😉

[@Gurn-xh5fg]

@@jimbob8969 Cloning a vehicle is a crime in all 50 states. It can land you in prison, and your Chinese "Mustang" kit car in the crusher.

[@ErikOlaf-g9y]

@@Gurn-xh5fg The DMV has entered the chat...

[@eligebrown8998]

This is a great video. That mustang already looks awsome. I'm definitely going this route.

[@danielktdoranie]

Awesome guide, I was wondering how that part was done

[@danielcadnum7214]

What nice lines that Mustang has on it. 😊

[@josemedeiros007]

Great job building your Mustang Fastback off Dynacorn body parts, and information on how to Title your car.

[@Must-StanginGarage]

I know I posted something on here the other day, I don't know what happened,.but really cool, like seeing the progress and your actual work instead of just progress keep it up

[@1194video]

@@Must-StanginGarage it’s been slow lately with my father n law and shop hand passing, I haven’t do t much work on any of my cars, even the chevelle is waiting for me to get back on it, but I’ve had a lot of questions about cost to build and how to register so I made this video giving more details to help everyone out

[@Must-StanginGarage]

@@1194video my Dad passed 12 years ago his birthday was on the 15th and my wife passed right after I lingered on not doing anything besides God and trying to help others but shutting off my life, I've always liked working with my hands and accomplishing things and your brother and you and your dad in the background have given me a new lease on life, average male life span is 75 and I'm almost 64 I can never get the prior years back they're gone so I've got 11 years left so use your years wisely everyday gone is a day gone,

[@Must-StanginGarage]

@@1194video hang in there my dad past 12 years ago then my wife right after that had 4 bypass died 3 times lost another brother since got cancer and fed so much steroids I got up to 450 pounds and I've hurt my back with arthritis throughout my body but everyone would want me to keep going, and time lost is time lost you can't go back in time sometimes you can get caught up but time lost is time lost, prayers for you, and as that famous philosopher said get er done

[@bbay1977]

Glad to hear that it wasn't too much of a pain to get it legal. I thought the state would push back a lot. Looks like I may have to build me a car now so I can enjoy her before I keep getting too old to do the work 😆😅

[@gsabic]

you are living the dream bro!

[@1194video]

@@gsabic sometimes seems like a nightmare

[@stevenoe6395]

Do they title it as a kit car or a ford? Great video and great work would love to build a 69 or 70 429 boss my favorite 2 mustang years first time i ever wrnt over 100 was in a 70 my uncle had think i was 5 or 6 loved it unfortunately was so excited i told everyone and got him in trouble lol

[@1194video]

@@stevenoe6395 it’s titled as a 1967 mustang, these are reproduction cars not fiberglass kits

[@MrMattDat]

That is just friggin' awesome!!

[@JohnDoe-fn7ml]

Great video!.. cool project!!🇺🇸

[@maristoldboys5466]

Amazing job putting this informative vid up!!! My dream project is a 68 Mustang coupè not fastback. I prefer the straight lines as I feel it shows off the immortal concave tail lights best. Best wishes from Fiji. God bless you all in Jesus' Name amen. ☦️✨🌴🇫🇯

[@1194video]

@@maristoldboys5466 amen!

[@francoisbedard7394]

I think JESUS loves MUSTANG too !! 😂😂😂🇨🇦

[@1194video]

@@francoisbedard7394 can’t argue with that

[@robertwright1084]

So, does the car title and registration read as a 1967 Mustang or as a 2024 kit car and how does smog work? I live in Commiefornia and the smog rules here are horrendous! Will it need to pass smog as a new car or a classic car?

[@1194video]

@@robertwright1084 it is titled as a 1967 and does not require smog depending on the year and of course states are all different, I can only speak for TN

[@jesse75]

I live in California. No smog for my 67.

[@johnny.d.1930]

​@@jesse75 What if you put a coyote motor in it? Will CA require smog testing?

[@ExileXCross]

​​@@johnny.d.1930 Yes, there a box on the form asking if the car has a Coyote motor in it.

[@markc1548]

My country the vehicle is registered as the chassis, whatever panels go on the chassis is just for looks

[@brettwallace1226]

That makes a lot more sense to build it yourself you get a lot better build. No surprises or rust . I could care less if it's real . I would rather it be solid and rust free I want to drive it not look at it . Thanks for the information.

[@TheAverageTinkerer]

Very nice! I remember when crate Mustangs and Camaros came out about 10-12yrs ago. Is this set up for late model suspension? I think the OG ‘Stangs were. Camaro for sure was, you needed a 4th gen as a donor car. Awesome this is available though. Ohhh CFO! Where are you?!?! 😂

[@thomaswarner3060]

Look... It's so easy, ANYONE can do it. GREAT VIDEO.!!

[@AndreasAndersson-ve4jx]

In Sweden, if you replace the body on a unibody vehicle (or build a new vehicle, e.g. a street rod) and you do it yourself for your own use, it is classifed as an "Amateur built vehicle". In that case the SFRO handbook applies (from the Swedish organization for Vehicle builders), with rules/advices for the build. Your build will be inspected by SFRO & MOT & if approved, receive a new chassis number. It will not be a Mustang -67, but an "amateur built vehicle" -24. You e.g. need to apply the same emission control system as your engine originally used; if you have a -67 spare parts car and restore that driveline, you can use it as is. If you take a newer engine, you also need to transplant ECU, cats, Oxygen sensors, etc, all that stuff. An SFRO man will inspect your build, e.g. the welds before ground/painted, that steering & front end is properly built, there is a maximum allowed hp/weight ratio & other stuff.... Shortly, that the car is properly built & safe.

[@1194video]

@@AndreasAndersson-ve4jx they have to be inspected here too but only one time after built.

[@chuckles3265]

This seems like it would be great fun if I had a team of people to do the work and someone else's money paying for it.

[@cyberthug62]

What about the front crossmember.

[@tomking3942]

As you put the cowl together are you not installing the wiper linkage in there?

[@1194video]

@@tomking3942 the wiper linkage all mounts inside the car under the dash

[@jerrybyrum56]

Great video and inspiration for those of us that have wanted to build one but didn't have the confidence to do it. You mentioned a couple sources for your panels, Dynacorn and Classic Industries. Do you have a list of where you got the panels and is there a reason why you chose at least two sources?

[@1194video]

@@jerrybyrum56 dynacorn is the part, I ordered dynacorn parts through classic industries

[@oiygfdxssfgg]

Great video

[@truetech4158]

Nice project. You do really want to swap out the lighting in the shop from strobing epilepsy on demand ones that match the video camera you have now, to a proper pink floyd laser light show!

[@bjsteg79]

TBH the more I see of these videos, the more and more I want to do this versus restoring/rebuilding/modifying an original car

[@1194video]

@@bjsteg79 well Iv built many of these, with an Origional you have surprises where with this you can build to suite all new as you go rather than have to spend weeks repairing and cleaning dirt and rust

[@anthonyhendricks7377]

Hi bud I've been thinking about your build. I've owned several Mustangs over the years. Actually my first car was a 65', 6 cylinder, auto. I'm guessing you already know this but... repairing back quarters in a early Mustang the cars should have came with a drain hole in front, and behind the wheel openings. They were notorious for retaining moisture in the places. This would rust the quarters out. Early 59' through 61' wide bed Ford pickups had the same problem under the taillights. Just a thought from a old man that lived it.

[@dominiccase6846]

So the video started with the whole kit shown on the grass from dynacorn but you said the but later in the video you said the floor pan was from classic industries. Can you explain for me please?

[@1194video]

@@dominiccase6846 you can’t buy direct from dynacorn unless you are a dealer, so I ordered all my parts through classic industries which sells dynacorn

[@dominiccase6846]

@1194video thank you for getting back to me I appreciate the information. I have a 1969 and a 1970 429 I want to build a Boss 429 so I'm looking for a new body. I'm not going to bother buying a bunch of junkyard bodies to fit one together.

[@DaveConrad-c6h]

How many hours does the assembly take ?? Excellent video..

[@1194video]

@@DaveConrad-c6h 10-16

[@leotherocker94]

Man, i wish i could something like that here in Brazil.. getting title for something like this? Good luck with that.

[@1194video]

@@leotherocker94 it’s easy here in the states, I’m not sure on your laws there

[@leotherocker94]

@1194video man, here is not car project friendly.. i want to build a traditional '32 ford and the biggest issue is getting it registered.

[@markschroth5700]

Great information to share, thanks.

[@Json.-]

Awesome video

[@PaganWizard]

AWESOME PROJECT!!!!!! Can you add links to the companies you sourced the parts for this build?? Do you know if similar panels are available for a 71-73 Mustang fastback??

[@1194video]

@@PaganWizard www.classicindustries.com/

[@frankhassett2496]

I enjoyed your video. Does the state issue a dashboard VIN plate also, or there just isn't one? Thanx.

[@1194video]

@@frankhassett2496 it just requires one core the door but you can have one made for the dash and install it yourself

[@frankhassett2496]

@1194video I appreciate it. I will continue to follow your progress. Thanx.

[@1194video]

@ the inspector from the state told me to stamp the vin in different places on the frame too, just to give it more security

[@frankhassett2496]

@1194video That's sound advise! Good deal.

[@jasoncrandall]

Can someone explain the reason for punching holes in the panel edges? The holes don’t seem to be measured out or lined up with anything. He’s just boom boom boom hole hole hole.

[@uncleronny6748]

It's so you can make plug welds. Watch the 9:00 mark in the video where the rear floor section is installed. Basically each hole is filled with MiG weld for better penetration and strength.

[@jasoncrandall]

@ I understand that part. I’m more confused at the hap hazard punching of holes instead of them being numbered or measured. Does that not matter?

[@journeyquest1]

1985 i had a chance to get a solid 67 390 GT in black primer for $2k.

[@1194video]

@@journeyquest1 back in that time though these cars were not as desirable so I could see that. Be nice to k ow back then what they would be worth today

[@Maple_Gaming]

Could this be done with the 66 or 65 model

[@1194video]

@@Maple_Gaming it can

[@Maple_Gaming]

@1194video I might build one myself then

[@mrglasecki]

Extremely 😎 Kool build

[@bruceyoung1343]

That is amazing you can purchase a car of your dreams and assemble it. Providing you have the skills. Did you assemble cars for a company and that’s where you gained knowledge on part names and how they fit together??? This is very interesting to watch. THANK YOU 🙏

[@1194video]

@@bruceyoung1343 no this was just me wanting to build a mustang all new

[@bruceyoung1343]

@@1194video but where did you get the knowledge to do that

[@1194video]

@@bruceyoung1343 I’ve been building cars since I can remember, it started with my dad, I would help at his shop and slowly learned the skill

[@bruceyoung1343]

@@1194videowas he in a body shop ?

[@1194video]

@@bruceyoung1343 the skill was learned over the years just tinkering, nothing more than that

[@motomarcel1]

GREAT CHANNEL!! I need a full door for my 1970 mustang mach1. Dynacorn or Scott Drake?

[@1194video]

Dunacorn, scott drake has low quality primer on theirs that needs taken down the the metal and sealed

[@jamiemoore3359]

Great video and I will be following this build, maybe you mentioned this and I missed it, when you receive the title is it listed as a 1967 Mustang or a 2024 home built car?

[@1194video]

@@jamiemoore3359 it is a 67 mustang title just as it was back in 67 only difference is the numbers will start with your state abbreviation and number

[@Baralis]

How does the quality of the panels compare to a Ford factory built 1967 Mustang?

[@1194video]

@@Baralis the video I just put out last week shows the one with paint on it, none of the panels have had any body work, direct welded and painted, perfect fit

[@zeomarmob]

Are you using weld through primer?

[@1194video]

@@zeomarmob I am. Masterpro brand

[@zeomarmob]

@@1194video 👍 alright.. I just didn’t see it on the video. Thought to my self “it’s going to rust in few years.

[@1194video]

@@zeomarmob there are a lot I left out because it was taking so long g to film and having camera issues

[@yusifmeherremov9626]

it is the most beautiful car in the world😍😍😍😢😢😢

[@blade000007]

Amazing man!

[@frankmeszaros1357]

When you say you paid taxes on every part of the car you are refering to the sales tax on puchase?

[@1194video]

@@frankmeszaros1357 that is correct, each part has sales tax and once completed the state calculates that tax paid when filing the paperwork. Rather if you buy from an individual for say 20,000, you have to pay taxes on that purchase price when registering it

[@2OO_OK]

Is the manufacturing date on the title 1967 or 2024? If it is 2024, are you emissions testing exempt? You did great with this.

[@1194video]

@@2OO_OK since this is a reproduction it went off the body so my title says 1967 mustang and it does not require emissions

[@2OO_OK]

@@1194video Sweet!!!

[@OVHabitats]

I would love to have a 65/66 fastback. Can you do the new build with those as well?

[@1194video]

@@OVHabitats they do have 65-66 as well as 69-70

[@OVHabitats]

Would you be willing to build a body for me?

[@raymondbredin8936]

How much did it cost ?

[@1194video]

@@raymondbredin8936 watch the video and I tell you exactly how much it cost in a full breakdown

[@kevinlewis9151]

Looking sharp, but just curious if you have the spare $, why not order enough carbon fiber and duplicate every piece, using this kit to make the molds, and have a secondary super car that's modeled after a classic?

[@1194video]

@@kevinlewis9151 thats a ton of $ that I don’t have, this is just fun for me

[@JACB006]

Will it be registered as a 1967 Mustang or a 2024 Mustang?

[@1194video]

@@JACB006 67

[@Petequinn741]

Great work. She's a beauty early already

[@Mustang65898]

Where in Tennessee?

[@1194video]

@@Mustang65898 middle TN

[@lawrencehalpin6611]

Thank you. God bless.

[@silentknight9509]

Are there other cars that this can be done with

[@1194video]

@@silentknight9509 65-70 mustangs, Camaros and chevelle and some trucks

[@silentknight9509]

@@1194video would a 70 to 73 camaro be possible ?

[@1194video]

@@silentknight9509 idk if I’ve seen one, they might make them but personally I’ve not seen one myself

[@silentknight9509]

@@1194video can I ask where you purchased yours from

[@arthurgay5746]

You can buy a complete shell already built on a frame jig. Guaranteed to be straight ...

[@1194video]

@@arthurgay5746 the only way I can guarantee something is done right is to do it myself, I watched those videos of guys who ordered the or assemble body with horrible gaps

[@ssuuhhdduuddee7354]

Where would you buy that at

[@1194video]

@ classic industries

[@ssuuhhdduuddee7354]

@1194video man I looked on classic industries but I can't find already built kits only on dynacon do I see them already assembled

[@1194video]

@ www.classicindustries.com/product/fbs67.html

[@cooldog60]

Big mark up on the body parts.

[@1194video]

On everything right now, and lots are back ordered

[@Dwlukinbill]

My Dad bought his assembled back in 1967 😜

[@1194video]

@@Dwlukinbill lol yeah, I was a little late on mine

[@johnmanasco7809]

Where in Tennessee are you? Im in far east tn

[@1194video]

@@johnmanasco7809 south Cookeville

[@roberthoffman4587]

I'm Amazed

[@1194video]

@@roberthoffman4587 glad you enjoyed it

[@OVHabitats]

BTW this is a great video.

[@markroderick3300]

I wish somebody would do a new body for International Scout 2

[@jeffalvich9434]

Well spoken!

[@crazydriver88934]

Would any auto insurance companies insure that?

[@1194video]

@@crazydriver88934 I haven’t had issues myself

[@anthonymosiejczuk8945]

Dynacorn does sell them.

[@1194video]

@@anthonymosiejczuk8945 they do but you have to go though a vendor. Classic industries has them

[@anthonymosiejczuk8945]

@1194video I went to their site and they have the prices on assembled bodies but no mention that you have to go through a middle man.

[@Superflight777ge]

Beautiful to own a brand new 67 fastback but I don't like the idea of trying to sell it will a state ( or province ) given vin number it will not bring in the same value as a actual 67 fastback on its original vin.

[@1194video]

@@Superflight777ge it will bring more

[@draggerlane04090]

But what is it registered as. I know the car is a 67 shelby mustang but in reality it isn't. would it be consider a clone? What does the title say it is. I'm curious

[@1194video]

@@draggerlane04090 it says 1967 mustang on title

[@draggerlane04090]

@@1194video So there is nothing indicating that the car is basically a home built car besides the VIN#? I'm sorry for the questions I honestly don't know these things.

[@1194video]

@@draggerlane04090 pretty much, most ppl use the vin off an Origional car so in that case nobody would know but for me that’s what makes it so much better is the fact it’s a brand new car with no rust

[@greentonythetig]

Amazing :)

[@yusifmeherremov9626]

My dream car😢😢😢😢😢😢😢

[@camojoe83]

"All original, price firm. I know what I got."

[@1194video]

@@camojoe83 forgot rust free

[@sandyhanson6082]

Here in California it is a nightmare!

[@1194video]

@@sandyhanson6082 that’s what I’ve heard, be easier to have it done in another state then reregister it in California

[@Daytonaman675]

You from georgia?

[@1194video]

@@Daytonaman675 Tennessee

[@Stunthangar]

There is no tax unless you live in Missouri. I have been through this, and on top of that, you will pay high personal property tax every year on.

[@1194video]

@@Stunthangar sounds like a reason to not live in Missouri

[@jamesb2291]

Depends on the County

[@1194video]

@ and each state has different laws within the country

[@jamesb2291]

@1194video I was saying in missouri it depends on the County. Some have pretty low property taxes, and there's been talk of eliminating it entirely

[@1194video]

@ wouldn’t that be great everywhere if property tax was eliminated

[@TimeVault1]

Awesome

[@dilligaf2818]

thats great

[@mchristr]

The bottom line question is this: How much are you willing to pay for a clean, original title? When you buy a 50 or more year old car, you are actually buying the VIN plate and the title. Then you can expect to pay tens of thousands of dollars to make the body rust and Bondo free. That is the reality of owning an older classic. Or learn to do body work and paint.

[@1194video]

@@mchristr go to a car show and tell me which one is Origional and which one is new. Bet you won’t be able to tell, that’s the main thing you

[@buttsexandbananapeels]

I would rather build new. I don’t own enough pairs of jorts to chortle on and on about “my classic.” These cars were meant to drive and too many boomers ruin them with garage rot because they treat them like sneakerheads would a pair of Jordan 1s. If it has wheels, send it.

[@JoeKyser]

Why did I have to find this video? Im doing it

[@1194video]

@@JoeKyser it’s a lot of fun for sure

[@JoeKyser]

@@1194video your videos are just way way too helpful. I can't get over how detailed it is

[@bbay1977]

Just started thia video but I aee you only saved around 7k by building it yourself. I think I would have just paid the extra 7k and had more of a head start on the build. I understand that you did it more for the channel to show the work being done though. I have thought about this before with other cars as well and cant wait to hear about the registration part of this. Thanks for this upload here.

[@1194video]

@@bbay1977 kzbin.info/www/bejne/oWitno19pq9liMUsi=X2Xsza-3RSPottOf

[@JoeKyser]

18:54 thats where lack of expereince and reference is going to kill me

[@1194video]

@@JoeKyser it can really be in a mess at that stage

[@newmobile1455]

and to think it was $2,100 in 1969 for the moc 1

[@Ben-o4x]

IF AND ONLY "IF" you are going this route take it to the Next absolute Best Level Fabricate your Turbo Coyote engine in Back of the Fast Back!!! Let's be Real and say it should've came like that. (Plus it will give you a a nice opening for glass in back to see the engine!) Gosh I wish I could've designed these cars back then. Also I'm a GM man.

[@yusifmeherremov9626]

I want this car😢😢😢

[@nater6604]

Why wouldn't you invest in a pannel spot weld machine and do it the right way. Not knocking your work. I would love to do the same build. I think using a pro spot machine would be much stronger/safer in a accident.

[@1194video]

@@nater6604 not in the budget

[@xphiles2345]

probably better built than anything Ford could do these days, or most other dealers for that matter

[@1194video]

@@xphiles2345 thank you for that!

[@casualcarver4887]

I WOULD RATHER BUILD A IH SCOUT 2

[@1194video]

Build one and send me a link to the video, I’d enjoy watching a scout build.

[@danstory4286]

One should check into the legalities before ever starting this process.

[@nightrunner1456]

Most young people can't afford to buy a used car or find a job! like I could do in HS. To succeed they have to think out of the box.

[@1194video]

@@nightrunner1456 you have to want it, now days they make it too easy to be lazy

[@1194video]

@@glock22357 you need to find better things to do with your time

[@Rickster621]

You have to name the car Gavin

[@jeffturner6300]

CANT DO THAT IN CALIFORNIA IT WO,ULD HAVE TO PASS SMOG AND CHP INSPECTION

[@1194video]

@@jeffturner6300 we don’t count California

[@mattbergseid9196]

I don't think you guys know what you're talking about, the car culture in California is alive and healthy,

[@1194video]

@ i think you misunderstood, we are referring to how much harder it is to legalize hand builds

[@John-rf4sv]

✊✊

[@jeffgatien5815]

God I hate when people say vin number it’s just vin that’s it vin it’s not vehicle identification number number

[@1194video]

@@jeffgatien5815 it’s actually called a body number if you want to get technical.

[@johnbriggs3916]

A vehicle VIN number? 😉

[@1194video]

@@johnbriggs3916 lol

[@1967mercurycougar]

Next, she’ll be criticizing me for going to the ATM machine

[@1194video]

@@1967mercurycougar lol 😆 or the DMV

[@Lorac_Miko-rv9xe]

My question is ... does it come in right hand drive 😂

[@1194video]

@@Lorac_Miko-rv9xe yes it does if you choose that option