Building a Performance Setting on the Roland JUNO-DS (Part 1/2)

[@chrisjaros9802]

This is SOOOO helpful!!!! I bought this keyboard a while back and am still learning how to use all the functions properly. What makes it annoying is that the manual that comes with the keyboard gives nearly no info or step by step information for doing things like this, so me with nearly no experience in this genre of music and trying to learn it am finding that good KZbin tutorials like this are a billion times more helpful than the manual.

[@Subhranilmelody]

Actually I am an Indian, so I tried Hindi video first. But nothing is explained properly. Then I found you. Hats off to your efforts. I am just buying to go this keyboard which is sold as Roland XPS 30 in India.

[@robinmr15]

I wish I could give this a million likes! Awesome info and a well done video! thanks!!!!

[@fritskoster6739]

😀Hi Matt, thanks for your nice tutorial about Performance mode on the Juno DS it brings me back to play the Juno again and do a lot more with it. Thanks very much. Greetz Frits

[@nathanwahl9224]

Thank you, very well done, I learned a lot, it's especially nice to find information on use in a live setting! I just got my 61 yesterday.

[@nathanwahl9224]

Six months later and I'm back. Getting this thing sorted out, going live with it Wednesday at rehearsal for a gig Saturday night. Finally. Life happens. Not to mention that it's been very difficult finally getting to this point. But I'm back here as a last - step sanity check to make sure I'm on the right path, seemed like the best resource I've found. Thank you very much!

[@YC-musica]

Thank you! This video is extremely helpful. Well done!

[@YuiHisaishi]

This was sooo thorough! Thanks =D

[@luisarroyo666]

WHTA A GREAT AND DETAILED VIDEO!, this so great! thanks man!

[@denim_ak]

Very helpful, thank you. I’m trying to see if I can assign a separate voice to my Roland AX Synth Keytar that I have plugged in through midi to the Juno. If you have a video on that I’d love to see it.

[@ON_THE_NET2]

Thank you for your work Matt 😃! You made the best video🤩 I could find on the juno DS (and yet some KZbinR or thousands of subscribers..). Your video overlays are great, Work worthy of a professional!

[@mirkomontaldo]

good Demo mate. Is it possible to associate a Drum track in one of the part? So as Drum starts along with the other parts?

[@jaakkojokela-bergstrom8018]

awesome tutorial for power users!

[@davidkelly831]

Great video Matt, thanks.

[@wilcossbazile9704]

Question...does the basic tone editing capabilities have graphics types or just numbers ? exemple ...like the old juno g, you would have tone structure choices or filter cutoff in either a graphic style or just in some numerical values etc...I'm just curious I wasnt able to see any videos exploring the basic tone or patch editing capabilities on the DS! the only thing I suspected is that it seems to bear alot of similarities to the old JunoG!

[@DjMorningstartrancedj]

Thank you

[@uniquebeatsboutique]

Is it possible to use saved layered favorites in pattern record mode? Thanks

[@trint26]

can you loop the 3 layers on 1 pad? is this different from the pattern sequencer? Sony settings I've never messed with. love the video.

[@杨几沁]

very helpful !!!

[@lemarquisdean9254]

Is there a way you can control each sound with the faders almost equivalent to the Yamaha motif????

[@sbusisomasuku671]

Also interested in this. Don’t know if you ever found out..

[@basskidful]

I'm here wondering the same thing

[@lezginUral]

Прошу помочь с советом по этому инструменту. Мне надо тембр некоторых ударных сделать протяжнее, длиннее. Можно ли это сделать?

[@paolomozartpol8599]

Hi Matt, your video is beautiful, well done!! I would like to know if the patterns | can be saved on the juno ds sequencer on memory or pendrive? Can I load patterns saved with songs without problems or having to turn off the keyboard? Thank you

[@CollectiveVoice]

hi matt, need some help setting up performance mode. when doing a live show i use my daw to play my brass, strings, guitars on drifferent midi channels. how do i set the juno up do read patch changes, midi controls. example if channel 2 in my daw tell the juno use a piano patch but the next song i need channel 2 to change to strings and a lower volume how do i set that up.

[@turtlefeet7722]

thanks buddy

[@danmaduff8919]

Red Rocks Worship? Are you here in Denver, CO? Red Rocks Church has become massive here.

[@britesynth]

What if I dont turn the keyboard switch ON on the keyboard column and instead set all the part's ch to ch 1 and the performance mode tx/rx ch to ch 1 will it still make and play the sounds? I'm a bit confused of that keyboard switch coz on earlier synths layering is done by setting the all the parts ch you want to layer on the same ch no keyboard switch needed

[@seyanofficial4362]

Thank you..nice information

[@milespritzkat4979]

Have you done any videos on manipulating/adding effects to a particular patch? I know it has potential, but I haven't quite cracked it

[@taio.99_music]

Ciao, c'è un modo per passare da un suono all'altro senza smorzare il suono tenendo il pedale sustain?

[@djba]

Hi and thanks for a very clear video. Did you put the key in the title of the song just so you would remember what key you play it in? I guess what I am asking is that there was nothing in the patch that you created and saved that made it just for the key of Eb was there?

[@mattferree]

The key of the song matters because the split points will change for different keys. I made it so that the riffs fit perfectly on the sections of the keyboard

[@kiwictor3752]

thx! :)

[@fireblazer6661]

Stupid question. When naming the performance... how can I delete the already existing name? Anyone know? There seems to be no "delete" button to delete a letter, so I'm not sure how to rename things efficiently as opposed to spinning the wheel for each already existing letter... I'd like to just wipe the whole name, and start from scratch with some short basic naming schemes. Just got the board the other day for 500 CAD (only been played maybe 40 times). Steal of a deal. Just trying to figure out some basics while I wait for my friend to send me the manual in the mail (he forgot to bring it with him).

When you press "Menu", there's a pop-up where you can delete or insert characters.

[@fireblazer6661]

Hey thanks for the reply! Meant to pop on here and thank you sooner. This helped immensely. Such a simple thing, yet I couldn't figure it out.

[@markanthonyfornillos9002]

Hi Matt. Subscribing from Philippines. Mine is the xps30. I find it semilar to juno ds because i cannot find an english tutorial on my xps30. Hope you can help me mix ep sounds for worship and also good piano sound. Thanks. God bless you bro

[@ellenbacklin]

Checking on good hammond b3 sound in particular and good grand piano sound that's it! Just check my profile pic and you'll know what I'm talking about

[@dekzan]

🟥🟦 Thanks a lot. Do you take donations ? I don't see a " thanks $ " tab.

[@mattferree]

Thanks so much! I added a Donate button to my channel banner. Paypal.me/mattferree. I can't add the Thanks $ button yet, since I have

[@dekzan]

@@mattferree Do more reviews. It attracts viewers. Me particularly have tried several told to be superior stage keyboards, but I prefer my 🟥🟦 Juno DS. It's internal amplifier and Eq capabilities are awesome with rich mids and adjustments. But has to be played in stereo. I use Yamaha's HS 8. ✌️🤣✌️

[@mattferree]

@@dekzan Thank you! I may do some videos on Korg Kross in the future. That's my preferred synthesizer.

[@dekzan]

@@mattferree I've been watching the Roland RD88 also.