Building a skin-on-frame canoe

  Рет қаралды 34,432

Jaap Bolt

Jaap Bolt

Күн бұрын

Пікірлер: 43
@capefalconkayak
@capefalconkayak 6 жыл бұрын
I really like the creativity of the final shot!
@stevehisey389
@stevehisey389 6 жыл бұрын
Nice build on your sof, looks like a Platt Monfort arrow 14. I REALLY enjoyed your time lapse of the build, best vid of the whole process on utube. I built his snowshoe 16 with modifications and enjoyed the process and the end result. Great job!
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
You have a keen eye! It is based on the arrow 14, with some modifications! glad you enjoyed, thanks! Jaap
@gregory1778
@gregory1778 6 жыл бұрын
Very beautiful. Didn't you use floorboards? What was the final weight? What modifications did you make and are you happy with them? Do you usually paddle it single blade? I am ready to start building also arrow 14 and love to read your feedback.
@OldWhitebelly
@OldWhitebelly 6 жыл бұрын
Handy little boat, and a beautiful video as well. Very nice :)
@drewporter33
@drewporter33 6 жыл бұрын
Beautiful boat. Good job.
@stevin6234
@stevin6234 2 жыл бұрын
I really enjoy watching your video and would like to build this model could you please let me know where I can get the plan/pattern I would much appreciate it. You did an AWESOME JOB!!!
@DrChrisBiomed
@DrChrisBiomed 2 жыл бұрын
Geodesic Airolite Boats
@spottycat22
@spottycat22 3 жыл бұрын
Nice work. Thanks for the video. I wondered if you knew the weight of the finished canoe? I assume it is just a one man canoe?
@jaapbolt8780
@jaapbolt8780 3 жыл бұрын
I weighed it quite a while ago, I believe it was around 12kg. It easily fits two persons!
@spottycat22
@spottycat22 3 жыл бұрын
@@jaapbolt8780 Ok. Many thanks
@mheermance
@mheermance 6 жыл бұрын
Nice looking canoe. I imagine it is much easier to portage than fiberglass or royalex
@jbutzi
@jbutzi 4 жыл бұрын
Great job!! How much does it weigh? I am trying to decide between the Arrow 14 and Cape Falcon designs. Any thoughts? I like Cape Falcon but don't have the tools to make a laminated mortised gunnel.
@XDawnie
@XDawnie 6 жыл бұрын
Nice Jaap! Fijne muziek ook, ik heb Roo Panes vorig jaar live gezien :)
@วีระพงษ์ภิมาลย์
@วีระพงษ์ภิมาลย์ 3 жыл бұрын
1. What is the length of the whole hull? 2. What is the width? 3. How tall is it? I need the size and plan used to build the boat as yours because it's good.
@DrChrisBiomed
@DrChrisBiomed 2 жыл бұрын
Geodesic Airolite Boats
@masimeel
@masimeel 4 жыл бұрын
Did you steam the ribs, or just cold-bent them?
@jaapbolt8780
@jaapbolt8780 4 жыл бұрын
They are steam bent.
@bluewondercanoe
@bluewondercanoe 6 жыл бұрын
Good job - looks great!
@MrUltralove
@MrUltralove 6 жыл бұрын
nice build. I wanted to make myself one aswell but I don't have the advanced tools like other videos. your build style seems to fit my workshop. did you use steam bending or not?
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
Thank you! Yeah you need only very basic tools if you're a bit handy with them. I did do some steam bending for the ribs, which are only 5mm thick. I bet you could also bend them with a heatgun, especially when kept under water for an hour or two prior to bending. Good luck!
@MrUltralove
@MrUltralove 6 жыл бұрын
@@jaapbolt8780 thank you for the reply. I think will build a steam chamber out of plastic pipe. what shape or mold did you bent the ribs on? just freestyle or is there any templates for them aswell?
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
@@MrUltralove No problem! I also just used a pvc pipe with an old kettle underneath and an old towel on top, works absolutely fine. I bent them inside the frame which I already build on the mold, as you can see from 1:00. On the left is the pvc pipe and I quickly bend the ribs while securing them in place with tiewraps.
@MrUltralove
@MrUltralove 6 жыл бұрын
@@jaapbolt8780 Got you. Nicely humidated pieces adapt the form inside the frame I guess. I can't wait to start! I will only be using chestnut material for the frame because that is what I have in hand, but it has a nice grain. Won't be a huge problem I guess...
@MrUltralove
@MrUltralove 6 жыл бұрын
@@jaapbolt8780 So you are saying they take the shape of the frame when you well-moisturize them. I am going to use chestnut for this project because it is what I have in hand now. It has a nice straight grain but what would you think about bending ability of chestnut?
@avit719
@avit719 6 жыл бұрын
Where d'ya get the plans?
@Saguache
@Saguache 6 жыл бұрын
Did you mortise the stringers into the gunnels? It's a nice shape
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
Hi Matthew, do you mean the ribs in the gunnels? In that case no, they are just glued between an inner and outer gunnel.
@jasonsytsma9367
@jasonsytsma9367 6 жыл бұрын
Whats it weigh?
@TRIPONTHIS
@TRIPONTHIS 6 жыл бұрын
Nice, What did you use as a skin, what was the coating, and did you use tape to attach the skin to the canoe at he rim. I'm rebuilding a single person canoe with a canvas skin painted green.
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
The materials are added to the description! I used a regular contact glue, which I'll not bother to do again. I found out tape is much more efficient. Good luck, sounds cool!
@carlospuce1739
@carlospuce1739 3 жыл бұрын
Great video. What material did you apply to the Superflite?
@matdowdall
@matdowdall 7 жыл бұрын
Very cool build what was the wood you used and how long did the complete build take
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
Thanks Mat! I added the materials & time it took to build in the description. Cheers, Jaap
@杨超-b3u
@杨超-b3u 6 жыл бұрын
这艘船重量多少?
@coffeelover5358
@coffeelover5358 6 жыл бұрын
Hi , what kind of wood did you use?
@jaapbolt8780
@jaapbolt8780 6 жыл бұрын
Hi there I mainly used Douglas fir, ash and some black locust.
@domeniconastasi7151
@domeniconastasi7151 4 жыл бұрын
Good job... fantastico!! :-)
@killerskincanoe
@killerskincanoe 3 жыл бұрын
this is KILLERSKINCANOE
@joshuawilson326
@joshuawilson326 6 жыл бұрын
Looks like a Notus
Steam bending Skin-on-Frame Canoe ribs
29:07
Cape Falcon Kayak
Рет қаралды 50 М.
Skin on Frame Canoe build - skinning with nylon fabric - skinboat
16:40
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Tandem and Solo Skin-on-Frame Canoes
17:23
Cape Falcon Kayak
Рет қаралды 64 М.
'FlyPly' - How to build a 'tortured ply' canoe in 6 minutes!
6:06
Peter Robinson
Рет қаралды 813 М.
Building a skin-on-frame Canoe.  Part 3:  Assembling the frame
12:10
Cape Falcon Kayak
Рет қаралды 35 М.
Lashing a kayak
7:01
Kudzu Craft skin boats
Рет қаралды 51 М.
Building a SOF Wee Lassie canoe
3:01
alias1719
Рет қаралды 82 М.
Building Skin on Frame Nesting Canoes
10:04
Cape Falcon Kayak
Рет қаралды 150 М.
Building a skin-on-frame Canoe.  Part 2:  Prototyping
10:52
Cape Falcon Kayak
Рет қаралды 45 М.