Building a Subaru 22B; Total Chassis Tear Down

[@ProjectSageMedia]

Tanner is unhinged lmao. 2 years ago we were watching him build Subarus. Now we’re frame up restoring cars every few months. I know it’s a popular thing on KZbin for people to do but it’s much cooler watching you do it. Typically the paint and other aspects of the car are done by shops or the channels employees. You’re restoring these things at such a professional level.

[@Smeedia]

I’m all for the DIY aspect on things 💪 we also don’t have the. Budget to pay other shops so that’s just more experience for us 😂😅

[@hjm552]

Awesome community you have bro ❤

[@Smeedia]

Everyone’s the best 🥳

[@tridyo43]

15:32 - Us future RSTI/full restoration people would hugely benefit from a "master list" for suspension/transmission/drivetrain restoration.

[@Smeedia]

I’ll put something together as I go through mine. 🫡

[@tridyo43]

@@Smeedia 🐐🐐🐐🐐

[@Fackler91]

It's much better to watch this than the debate

[@Smeedia]

There’s a debate? 😂

[@Fackler91]

@@Smeedia yeah every 4 years 😄 🤣

[@Smeedia]

@@Fackler91oh yeah 😂

[@zach.avenarius]

Thats the vibe tbh😂​@@Smeedia

[@HarrodsGarage]

Haha we even have it in Australia. Don’t know why

[@sam-ch7ft]

I actually enjoyed watching the stripping .. definitely better than watching the debate!

[@Smeedia]

Sometimes we gotta just strip 😅

[@steb3n]

Man so good to see this build! Can't wait too see more keep it up!

[@Smeedia]

Excited to see it start to take shape soon 🥳

[@cascadianrallyteam9023]

I think this video has the most stripping of any video that still meets KZbin community standards

[@Smeedia]

Try to keep it PG 😂

[@notlad0807]

Stripping and grinding lol

[@andrewharris7868]

I'm more excited to see this build than anything previously, and that's saying something!

[@johnnyquest8333]

Just found your channel and really enjoying it. Picked up my first project car, 94 Civic Hatch, and have had a blast learning and doing stuff on it.

[@followtheornghat]

This work may be hard, and tedious. But its actually quite satisfying seeing the transformation. 💪💪

[@Smeedia]

That it is and your help has been greatly appreciated!

[@Lustr0us_Ma3str0]

With pearl paints you want to paint as much as you can all at once, especially exterior panels. Spray preasure, booth preasure, temp, etc. Depending on the brand of paint and the base color/candy, small changes can make a big enough difference to see when its all dried

[@Smeedia]

I’ll do the entire exterior all at once then, the engine bay and interior I’ll do together. I figured I want to try to do it all at once 😅

[@JamesBond-ip6pl]

Bro brought in the cavalry 💪💪

[@Smeedia]

All the help we can get 😅

[@norbelarchilla5578]

I respect you a shit ton Tanner, you're doing stuff the right way and learning as you go. If that's not motivation Idk what is

[@Smeedia]

Best way to learn is getting right into it 💪

[@adamweintraub6274]

YOU need to come to Texas. You will love it here.

[@juanticimo]

Really loving this content so far !

[@Smeedia]

Excited to see how this thing comes out 🎉

[@da9pauly]

Good progress gotta be happy to get thru this step!!!

[@Smeedia]

This is the worse part. Everything from here is the fun part 👌

[@Laborchet]

Tanner, you should rock the no hat look. Looks good on you bro not even kidding. Great work on this video, I used to work at a euro car restoration shop and I’m familiar with stripping down to bare metal, on 60 year old cars. That stuff is no joke!

[@Smeedia]

The older the car the worse they are to strip it feels like 😅

[@omialmanza1900]

Gc8's and 22b's are the best 👌🏼!

[@Smeedia]

Can’t go wrong with a first gen 🫣

[@dble5896]

Food for thought, next time welding out empty holes, grab some sticks of stick on cermics that stick on the bottom side allows you to weld the holes without making a mess. Also, possibly look into a small dustless blast company in your area if there is for the next car? Going to be a sweet build, keep up the hard work

[@Smeedia]

None locally that could do an entire chassis, called around a couple times. Definitely will try the title trick! I was using some flat aluminum bar as backing 😅

[@SonikJesus]

Been waiting for this build for years!

[@Smeedia]

The time has comeeeee 💪💪

[@do_italldayeveryday820]

The best part off working on projects is having friends the share love for things the you love make it faster and more fun 10x!!

[@Smeedia]

Makes things go by so much quicker and the company is definitely nice 😅

[@Cmfrs503]

Solid progress tanner🔥🔥

[@Smeedia]

Massive strides to get this thing ready for paint 💪

[@chrislancaster6986]

Dude Tanner. Good work man. Love watching this build continue

[@Smeedia]

Thank you Chris! 💪

[@sddrew24]

Great work, keep it up! Just a suggestion...you may want to invest in a car rotisserie to make life easier for future projects that are going to this extent. All of the grinding, stripping, preping, painting etc. will be much easier.

[@Smeedia]

My neighbors have one they said I could use. I declined like a dummy 😂 next time that rotisserie is getting used 😅

[@Nick_Spencer]

I appreciate you continuing to make videos Tanner. KZbin full time isn't easy and I just wanted to thank you for the entertainment and knowledge learned! Like automotive PBS!

[@Smeedia]

Thank you Nick and the support is always appreciated my man 🫶

[@R1Armadill0]

Cheers to having friends to help! Excited for this!

[@Smeedia]

Definitely made things go by way smoother 🥳

[@jakez_garage]

Favorite time of the week 🙌🏼

[@Smeedia]

🫶🫶🫶

[@ShocksBocks]

It looks like its probbably a nightmare when youre doing it yourself, but honestly every time I see the transformation on the coupe I wanna get one. Total transformation of a beatup old shitbox into something awesome. The temptation is real

[@Smeedia]

Taking a shit box and making them great is such a cool thing to see happen. Plus some deserve it 😅

[@ShocksBocks]

@Smeedia seriously, my first wrx was one of those kind and I miss repairing the thing lol

[@ItzCodeRed]

ive never clicked sooo quickly! Now youre making me want to tear down my Impreza OBSwrx and do a full restore!!!! XD

[@Smeedia]

Ton of work but you know all the issues will be fixed by the end of it 😅

[@taylorprice5813]

@@Smeedia I'm a software engineer by trade. I can tell you that coming into a project to help fix or extend it feels exactly like this sentiment. @ItzCodeRed, if you do yours take video and post it even if it takes a long time!

[@getnanoed]

Great video on progress 👏🏼 we cheering for you!!!

[@Smeedia]

always appreciate the support 🫶

[@rjruelas6740]

Shout out to awesome friends!

[@Smeedia]

Coming in clutch 🥳

[@arltvrs8485]

I'm here reporting to watch my favorite content 🫡

[@Smeedia]

🫡🫡🫡

[@Wolfwood0011]

Maybe invest in one of the wet sand blaster kits for a pressure washer. Have not used one myself but supposed to work pretty good.

[@Smeedia]

We have one but no where to be able to use it without clogging the facilities in ground water filters with media

[@kimthomsen1109]

Great stuff mate make yourself a rotisserie your body will thank you when you get old take my word for it 😂

[@Smeedia]

The funny part is I have access to one but I declined using it like a dummy 😂😅

[@scottjewhurst]

That's awesome that you have good friends like them to help! Can't wait to see this little baby come to life!

[@Smeedia]

They definitely made things go by quicker and the company was much appreciated 🥳

[@sethjeglum5294]

Sweet cars and strippers, nice! Thanks for the video. Totally awesome! Thanks for sharing! 💯😎👍

[@Smeedia]

Thanks for the support 🥳💪

[@DGMWRX87]

Literally just came here to look for this 😂

[@Smeedia]

Oh this has been so much fun 😂😅

[@cd5sircoupe]

The time lapse is pretty satisfying when there's a visible change happening, like when big chunks of the undercoat become bare metal. It's not quite as interesting when it's just everybody moving around and you don't see much progress. Might I suggest another song to add to the rotation? _91nova - What Color Is The Sky? I'm pretty sure it's royalty free, heard it in other videos in the past. Great for b-roll and time lapse. Home - Resonance is another great one people use often.

[@Smeedia]

I’ll see if it’s in the royalty free category! Finding good or decent audio that is not copy righted is so difficult 😅

[@chrislancaster6986]

Quick question. Is a media blaster just too much of a mess to deal with? Seems like it would be a lot faster even with the additional cleanup

[@Smeedia]

Unfortunately yes, it would wreck the shop with dust. And with engine builds happening I can’t have a ton of aluminum oxide dust floating around the shop 🙏

[@joshanderson1122]

Def the least fun version of "stripping " and tons of it. Hats off to you for pushing thru. But at least you stay in shape and its almost over with. So looking forward to the end result of all that effort 👌

[@Smeedia]

I’m just hyped the end is in sight for stripping 😅

[@georgenaranjo8852]

did you consider stitch welding/reinforcing the chassis at all? or are they already rigind enough from factory? Love the content!

[@Smeedia]

I have, before primer I’m going to stick weld it in some areas just to help with some rigidity and strength. I did not on the FD but figure this time why not 👌

[@MikeHynes.]

great video once again , but at 10 minutes all i could think of was a craig david song 😂😂

[@Smeedia]

Craig David song? 😅

[@MikeHynes.]

@@Smeedia kzbin.info/www/bejne/hmbPnpVrYtmhg5Isi=ekc5V2F5efvnejqJ. 🤣🤣

[@alfozinsavage4875]

Was it Levi first date on da wheel grinding 2 😂 so excited bring it on

[@Smeedia]

Him and that grinder got some beef 😂

[@penguwan_9515]

Before you get too far into reassembly tanner, you should snag an Ascent gas tank and see if it will fit the RS as its like 3 or so gallons bigger than an 05 sti tank

[@Smeedia]

I don’t foresee it fitting especially with the changes from GDs to newer models. Would be nice but the GD fuel tank should be plenty big 💪

[@albegt98]

good job guys 👍💪

[@Smeedia]

Thanks buddy 🎉

[@OGWhiskeyWrenchin]

If you decide to do your next “small project” try checking out a soda blasting set up. They sell them at HFT, your compressor should be plenty to handle it, and you have a paint booth if you want to recycle and keep dust down. Might buy a second booth for blasting, but it would be a hell of a lot faster lol

[@Smeedia]

I debated buying another booth for it, with the blowup booths I was a little concerned that the media might accidents blade though the material and ruin the booth 😅

[@OGWhiskeyWrenchin]

@@Smeedia In THEORY, as long as you aren’t blasting it directly it should be fine. Again, in THEORY lol

[@MERGATROYDER]

LET’S EFFIN GOOOOOOOOO!!!

[@Smeedia]

💪💪💪

[@camber_courtney5250]

Man, I'd say you had a full blown honeymoon with this car haha. First dates don't usually last a whole week 😂😂

[@Smeedia]

Lmao spending some real quality time with this one 😂

[@Fa5Ryan]

I would recommend if you continue to do full chassis restorations to invest into a car rositairy they will make tasks like stripping and reapplying the undercoat much easier to do

[@Smeedia]

We have one, next time it’s definitely getting pulled out and used for this 😅 my shoulders cNt take another car 😂

[@nickojan585]

Not boring lol I love it!!💪🏼💪🏼

[@steeveamedee5021]

Wow bros nice job teacher keep going tanner a order beauty on is way man❤❤

[@Smeedia]

🫶🫶🫶

[@jlumba81]

Next time consider using the rotisserie and have someone wet sand/soda blast the whole thing. There might be someone with a mobile set up in your area. Also a pressure washer with a sandblasting kit works too.

[@Smeedia]

My neighbors have one but we’re a little past that now 😅

[@chrisschuster6451]

I ended up finding two of the catted Cobb dp's because 2 builds.

[@Smeedia]

They be gold now 🏴‍☠️

[@Pr0j3ctSTI]

You can paint pearl separate. But if you are off by a little with the pearl when mixing then yea it might show

[@Smeedia]

I’ll try to do it all at once where I can 😅

[@WLFT-McNoob]

I now own Levi’s Haltech setup lmao. 702whp on Cobb Green Speed was a great feat, but looking to switch after having some issues with Cobbs restrictions

[@Smeedia]

Dude you’ll love the haltech, the swap to a Stand alone gives you so much more freedom

[@theinternationalhobo001]

Dude fantastic amount of work, and my shoulders would have exploded a tenth into that job so good on you. Your a better man than I. Could you have thrown a couple chain on the front end, put a couple dollys under the back end and yanked the sucker up with the hoist so the car was standing up on its ass to help you not have to do so much over head or do you think the chassis wouldn't take it?

[@Smeedia]

Tbh that’s not a bad idea but I don’t think it would be the safest 😅 would definitely save my back and shoulders some abuse 😂

[@Zaakro]

Make sure you are using a spot weld hole saw next time. They are pretty expensive, but you won't need to weld the holes afterward.

[@Smeedia]

That’s what we were using but I got a little carried away with it…. 😅

[@eliwilhoit8488]

Solid.

[@Smeedia]

🫡🫡🫡

[@85mmonroe]

Currently assembling my ej after the flexplate destroyed itself (same as matt). Would you install turbo or intake manifold first?

[@Smeedia]

Turbo first 💪 yours broke too?! Only two times I’ve ever seen that 😅

[@85mmonroe]

@@Smeedia Yea in the same fashion as Matt's. Sounded so much like rod knock I thought motor was done. No serious damage to the back of motor thankfully.

[@TP16Diecast]

Let's go boy's 🙌🔥

[@Smeedia]

💪💪💪

[@tommanning7337]

😎👍🏻👍🏻 Man, too bad you didn’t have an automotive rotisserie. That would make it way easier.

[@Smeedia]

Tommmmm 🙌🙌🙌 Definitely would have saved some arm muscle having one 😅

[@emansuela_real]

Did you consider using dry ice to remove the sound insulation?

[@Smeedia]

Tried it with the RX7 wouldn’t remove it, only cleaned it

[@emansuela_real]

@@Smeedia oh I meant putting the dry ice blocks in the chassis and letting it freeze the insulation. You should be able to break off the frozen insulation in chunks. Or take a small hammer to them and it breaks off

[@Smeedia]

@@emansuela_realohhhh I did that for sound detonating last time. Worked great! Most of the sound detonating in this kinda just peeled off. For the under coat it doesn’t work too well because it’s all rubber. Gets kinda gummy

[@Subeebles]

'97 2.5 GT mothballed. God, I wish I could do this same thing...

[@Smeedia]

It’s definitely a labor of love when you get to this point 😅

[@jacobstephens8447]

Hey it's David! I talk to him in Discord regularly. Poor dude's sti needs a rebuild

[@Smeedia]

Him and were working up a plan for his engine 💪

[@followtheornghat]

It will live again

[@yungcano9368]

Once u get to that point, I’d like to know what parts from a GD STi would bolt on besides the obvious things like drivetrain and powertrain, like steering rack, the U brace maybe? I heard that GD STi exhausts would fit into this chassis as long as you use the GD rear subframe. And also been wondering how far would 5x114 hubs stick out when put against the widebody fenders, maybe spacers would be required for certain wheels, or what would be best wheel fitment for the 22B widebody? Hopefully you can make a list of what things would fit from GD chassis and what things would require gc8 stuff only if it isn’t too much too ask. Appreciate the videos man💯

[@Smeedia]

I’ll make a list once it’s all done and together, tbh I’m not 100% sure yet what will and will not bolt up so should be a learning experience 😅

[@tridyo43]

Did you ever consider getting a chassis dolly so you could strip the undercoating with the chassis horizontal instead of using the lift? Just curious. If I ever did a project of this caliber I think that would be my plan but curious as to whether or not you think it's worth it.

[@Smeedia]

I have access to a rotisserie but it would take up the entire shop 😅 but I have considered pulling it out a few times 😅

[@lukebell2520]

What is a better option when building a 2014 wrx. Equal or unequal length headers?

[@Smeedia]

Equal length all day 👌

[@lukebell2520]

@@Smeedia okay, thank you. And I assume when stitch to equal length you should get a tune?

[@christopherthompson9642]

Are you going for the Prodrive set-up?

[@Smeedia]

Cross between pro-dive snd 22B

[@norbelarchilla5578]

Quick question, if you go the route of roller cage would it be easier to do it now?

[@Smeedia]

It would definitely be easier now 😅 might be worth doing

[@stevemartegani]

Man, I don't think I could handle that much wire wheel stripping again, I'm too old now lol Heck back in the day when I had the FF-1 stripped, I just took it to a local place and it wasn't that expensive. They also did a weldable primer coat that worked great too.

[@Smeedia]

I wish we had a shop over here that would do it for an affordable price. That stripping is such tedious work 😅

[@stevemartegani]

@@Smeedia I have no idea how much it costs today, but I paid like $1800 when I had it done back around 2009 lol

[@Smeedia]

I wish, I got quoted $5500 😢

[@stevemartegani]

@Smeedia WOW I didn't expect it went up that much! Thats more than Maaco quoted to paint my whole Impreza lol

[@Weidjeep]

Probably a dumb question but is there a roof scoop involved with this kit? For some reason my memory says at one point the WRC car had a roof scoop at some point?

[@Smeedia]

We could definitely add one, I’m not sure if I wanna toss one on or not yet though 😅

[@johnschumacher7307]

I’m not sure if you have discussed this or someone brought this up prior but are you putting a roll cage in the vehicle. Since that vehicle is a unibody, the roof is part of the structure and safety of the body. I know the roof is being replaced with carbon fiber but unsure how it will affect the overall durability. Safety first! Keep up the great work!

[@Smeedia]

I’ve been in the fence in if I wanna toss a cage in it. If so now is the time to do it 😅

[@Orichalcum_69]

This was the least exciting stripping video I've ever seen. I mean really who taught you how to strip? On a serious note its cool to see how hard you're working at this. I'm excited to see how the build goes! Keep up the good work =).

[@jetreaper8]

Loving this series!! 🔥

[@Smeedia]

I can’t wait to finally see it start taking shape 💪

[@jacobstephens8447]

You look like my boss without your hat 😅

[@Smeedia]

I got a BALD HEAD 😂

[@ASHINE001]

Question : why not get the car sandblast

[@Smeedia]

No one has a big enough booth locally

[@MannyRodriguez555]

There are sandblast guys that come to you as long as you find a field you can do it in. I got an fd rx7 done for $1200 and a week just sucks getting all the sand out.

[@Davorox1]

Checking on the 22b mid Gremlin hunt 😂🫡

[@Smeedia]

Gremlin hunt? Getting close to finding it? 😂😅

[@Davorox1]

@@Smeedia I found 1 busted vacuum hose and 1 loose coil pack so far 💀

[@Smeedia]

@@Davorox1less gremlins is always good though 😅

[@Pillers4Momoms]

What color you thinking? I may have missed it if mentioned in another video. Midnight purple would be clean. Edit : Actually remember you mentioned rally blue last video.

[@Smeedia]

Yessir 😅 WRB for this one. 🫡 keeping it classic

[@Pillers4Momoms]

@@Smeedia that’s right. Can’t go wrong with that.

[@chuckcribbs3398]

What about dry ice? Would that have worked better?

[@Smeedia]

Not so much from what I’ve seen in the past, it really just cleans and doesn’t remove

[@FarDrizz]

Hey smeedia , I threw a rod in my 2006 Impreza EJ25. What is the best option for an engine replacement? Any good reputable jdm engine depots

[@FarDrizz]

Im in Washington state, I was going to go with Sunwest Auto based in medical lake and buy a new block for 2995$ But I seen on JDM ENGINE DEPOTS their blocks were complete for $2,399 any recommendations appreciate you brotha

[@Smeedia]

@@FarDrizzis JDM engine depot new or used engines from Japan? Is the car a non turbo Impreza?

[@TrippleThreat03]

This is something I would do but I don’t have the money or time, lol I’m currently prepping my Subaru for paint

[@Smeedia]

Paint prep is such a tedious process. How much left do you have to go? 👀

[@TrippleThreat03]

@@Smeedia I’m just about done sanding, and pulling everything I need off the car, really only thing is stopping me is I don’t have a 250v outlet at my house so I can’t use my compressor unless I have a generator.

[@erickther3d387]

Aircraft stripper lost a chemical and that’s why it doesn’t work gotta find the right one! Also what color pearl you thinking? I hate being that negative Nancy but white pearl is a different monster us painters even struggle with it and it’s a paint match nightmare. Now are we speaking pearl in a 2 stage paint or 3 stage pearl

[@Smeedia]

It is WRB, tbh I’m not sure if it’s two or three stage. I have my primer, under coat, top coat and clear coat 👀

[@erickther3d387]

@@Smeedia wrb is a 2 stage base coat and clear three stage would be like a base color so let’s use a pearl white so it’ll be a base coat white with a “translucent” coat or mid coat that has the pearl and what not in it and then clear

[@erickther3d387]

@@Smeedia with you being new to sanding and paint work you’ll want the primer to sink back also get sprayable guide coat as soon as you finish your last coat of primer dust a coat on the wet primer

[@blacksongaming4819]

Hey bro was going to do a respray in white like you how much cfm does my compressor need. Trying to buy one

[@Smeedia]

Tbh it really depends on your gun. The bigger the compressor the better imo as it will keep run time down and moisture down. If you get a smaller compressor make sure you have some good water traps in line on the air feed

[@ThatGuy-yj3lu]

How about the body nuts? I've seen even good condition cars have body nuts break loose. Maybe reinforce/replace some common body nut failure points before paint?

[@Smeedia]

If any need some additional tack welds we can definitely knock those out too 🙌

[@ThatGuy-yj3lu]

@@Smeedia I'm talking the ones inside the body, like for the rear subframe. You have to cut open the rear frame rails to get to those.

[@chrisschuster6451]

No seam welding?

[@Smeedia]

Once it’s all down to metal we will do some 👌

[@notasgoodas8619]

You listen to music or podcasts while you're doing tedious stuff like this? Any recommendations?

[@thadboles2007]

This may be a dumb question, but wouldn’t sandblasting the whole car be much faster to get rid of all the undercoating? If not I’d love to know why it wouldn’t work. Love the content like always

[@thadboles2007]

Never I got to the part where you explained why you didn’t sandblast 😂 my bad b.

[@Smeedia]

@@thadboles2007haha all good! I wish we could just send it out for blasting 😅

[@kevind_53]

🥳Gaved the 1K like 🚗💥💨🔥

[@Indykeebler]

Is this method just for cost management? Seems like it would be so much easier to have it chemical dipped.

[@Smeedia]

For the most part yes, quoted $5,000 for chemical dipping

[@Indykeebler]

@@Smeedia I commented too soon because you are talking about that now in the video. 😂😂

[@uknterror508]

(OG TopGear Intro) On this episode of TopSubaru: Tanner gets to stripping, brings along his friends for a strip-off and things are getting hot and light

[@Smeedia]

Lmao 😂😂😂 I need to hire Jeremy Clarkson for voiceovers 😂

[@bertrugin]

Sorry I don't know if this was asked, but was chemically dipping the chassis not an option? Just curious.

[@Smeedia]

Too exspensive, roughly 5K and no real lead time. Plus they’re 5 hours away 💀

[@bertrugin]

You literally answered my question in video. Should have waited one minute before posting. 😬😬

[@Smeedia]

@@bertruginno worries at all 😅🫡

[@professorlife1619]

Faster to media blast with dry ice, or baking soda

[@professorlife1619]

Also can honey seal it

[@Smeedia]

Tried dry ice last time and the results were very lackluster, media blasting would work great but we don’t have anyone local who could do an entire car

[@professorlife1619]

@@Smeedia maybe higher pressure, I seen dry ice blast done on speed academy Integra with honey seal

[@professorlife1619]

@@Smeedia also I believe you have the ability to do yourself

[@Smeedia]

@@professorlife1619I don’t have the proper equipment for dry ice blasting. I can media blast it but it would wreck the shop with dust for months lol The price last time for dry ice blasting and the results I got just don’t make the cost worth it for something that may or may not work 😅 I know the wire wheel will work and it’s only $40 for that 😅

[@lanezandell7987]

Quick question. After completely taking everying off, why didn’t you get it sandblasted, or even acid dipped?

[@lanezandell7987]

There is an acid dipper in the portland area.

[@Smeedia]

@@lanezandell7987last time I called them I was told 5K for a dip. I’m not paying that lol

[@juanluisfernandezfolgueira7700]

Hola,me molan mucho tus videos aun que tengo que poner el traductor pero me vale jejej, cuando haces cambios de aceite en el subaru usa par de apriete del tornillo del carter??

[@WTFFISHIN]

Where are you located man? Id love to sit down with you and see if you could build my 06 legacy

[@mayaboylan5414]

You can buy a blaster And you could put black beauty in it Probably take you two days to do the whole car They're not that pricey You should should have looked into it

[@Smeedia]

I have, I need a Booth. It will make an absolute mess doing that inside the shop 😅

[@eis-zj4qq]

Imagine this thing with a built n/a eg33 in the rear "22B RS"

[@Smeedia]

Thing would sound so good 😍

[@Christosan88]

This is your foundation for a 500k car lol. I do restoration myself and the wire wheel is great for knuckles and stuff. But large areas that must be painful. I was watching wondering if you could have set up a sand booth under the lift.

[@Smeedia]

The pain I feel wire wheeling an entire car is unmatched to anything else 😂

[@peonthruster3061]

Best stripping video I've ever seen where no clothes come off

[@Smeedia]

We like to get weird but gotta curb it somewhere 😂