Building a top end PC with AIO cooling in the Phanteks Evolv Matx tempered glass case.

In this PC I build my father in-law a top end gaming PC with AIO cooling. The results are amazing!
************************
Please help support my channel by using my amazon shopping links.
amzn.to/2woKFiD
As an Amazon Associate I earn from qualifying purchases but this does not change your cost.
************************
Parts in the build.
Phanteks Enthoo Evolv Matx Tempered Glass case - amzn.to/2o89NXl
EVGA GeForce GTX 1080 Ti SC2 Hybrid - amzn.to/2BMutha
EVGA SuperNOVA 750 G3 Power supply - amzn.to/2PERQMK
Team T-Force Vulcan 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3000 - amzn.to/2P5vkeB
ASUS ROG STRIX Z270G GAMING LGA1151 DDR4 DP HDMI M.2 mATX Motherboard with onboard AC Wifi and USB 3.1 - amzn.to/2BNZzoR
Intel Core i7-7700K Kaby Lake Quad-Core 4.2 GHz LGA 1151 91W - amzn.to/2P7cns8
NZXT Kraken X62 RL-KRX62-02 280mm All-In-One Water / Liquid CPU Cooling - amzn.to/2P6C7EP
SAMSUNG 960 EVO M.2 1TB NVMe PCI-Express 3.0 x4 Internal Solid State Drive (SSD) - amzn.to/2LpJEMN
Music played during the video.
Furious Freak Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
If you found this video helpful please consider donating.
BTC - 1A5UnTttgpTLeoqbaeXXhw98qsWV2S4Hqw
ETH - 0xf12B72De1af23aFe090bBFa343CB5a3Ad701318e
LTC - LcAgEbCnLDwtkpX9reUN6wGRQpCnxq8HRm
Paypal - paypal.me/PCGoblin

[@troysgarage]

Amazing to see your Superpowers in action! (either that or you did a time lapse, either way that was cool!)

[@PCGoblin]

Lol! Im glad you liked it.

[@Polowik]

Nice Build

[@fedepcfix]

Excellent video! Im going for the same motherboard, ssd and case!

[@PCGoblin]

That's a great combo. Thank you!

[@PCGoblin]

I had so much fun building this. I cant wait to build another.

[@williamrapien6071]

Did he add anything later?

[@PCGoblin]

Yeah. Funny you should ask. He just added a 2 second graphics card to it.

[@r.maj.7065]

Wooow. My pc is here. What do you think this? Everything is same as your - just with 6700K + Noctua NH-U12S + SSD 850 EVO 1TB. Noctua cooler is good with 6700K? With 4.4 GHZ.

[@PCGoblin]

Noctua should be fine depending on how far you want to push the overclock. Though at the 4.4ghz you should be fine. Sounds like a great system. :)

[@r.maj.7065]

Woow - thank you very much for quick answer! Many thanks PCGoblin! :º)

[@harshlens]

Damn, your father in law did not hold back on high end specs.

[@PCGoblin]

Not at all. Thanks for watching. :)

[@twinsonix6348]

damn nice build..!!!..plan to do the same..noticed you put in 1x nvme..base on my budget,what do you think if im gonna put a less expensive 256gb nvme as my boot drive and 1tb 2.5 ssd as my storage?..or just get the 2.5 ssd then makes couple of partitions?

[@PCGoblin]

I always recommend getting the largest SSD you can whether thats sata or nvme. Why would you want to make a couple partitions though?

[@ventsislavpopov6446]

Hi there Goblin! Im building pretty much the same system. How is your airflow with the kraken ontop? Is there enough space at the top panel for pushing out the 2 fans air?

[@PCGoblin]

Hello Ventsislav, I think the airflow is fine up top. I didnt find any issue with temps because of it. I talk about the temps I saw in my other video about the benchmarks of this system. kzbin.info/www/bejne/an2wo5WHqb9_eNk Let me know if I can help with anything else.

[@rlui5496]

Where did you plug the AIO Fan Pin in? And where the Central Fin Pin from the Case?

[@PCGoblin]

Theres a water pump header on the motherboard for the AIO. The case fan(s) are plugged into one of the CHA fan headers on the motherboard.

[@JonnyIndica]

You push HOT air thru your top radiator? It could be more efficient w cool air flowing thru it. peace

[@PCGoblin]

And only have the one exhaust fan pull hot air out?

[@andrewleclerc6796]

Shouldn't you have those radiator hoses on the bottom of that 120mm to reduce any bubbles in the system?

[@PCGoblin]

Thats what it recommended, but I couldnt get it done in way that felt like it wasnt going to snap the hoses.

[@PCGoblin]

Great question though. :D

[@andrewleclerc6796]

Ah, thanks. I've seen others doing it that way too, so I was a bit confused. I'm getting ready to build a similar spec. computer in that same case, so I may have to do the same thing. Are you getting any noise from the gpu pump?

[@PCGoblin]

I occasionally heard noise from it, but I chalk that up to it being the type of pump it is over the position that its in. AIO's are not the quietest pumps in the world. But they do work and they are easy. :D

[@rayrod9010]

Hi, How do you fit the kraken x62 radiator on top of the case when support up to 280mm and the kraken radiator is 315mm??

[@PCGoblin]

Ramon Rodriguez The Kraken is a 280 as well. The top has a bit more room than 280. There was no mods or anything that needed to be done to make it fit. I held it at the top and put the screws in. Generally when a case manufacturer says 280 rad support any 280 aio/rad will fit.

[@rayrod9010]

PCGoblin so I can ignore the 315mm size spec on the kraken website www.nzxt.com/products/kraken-x62

[@PCGoblin]

Ramon Rodriguez With this case you absolutely can. :)

[@rayrod9010]

PCGoblin all right then thanks a lot... that the same case and aio cooling I was looking at to my new build before looking at your video but I was going with the x52 now I sure that I can fit the x62 :)

[@PCGoblin]

Im glad I could help. I also want to point out that all rads are bigger than the size theyre classified as. The 280 in my custom loop is probably closer to 315 as well, since all rads have to have stuff at the ends for water to go in and out of. I hope your build goes smoothly.

[@maya-qs6zw]

How did you connect the power button cable to the mobo

[@PCGoblin]

I ran the cable to the headers that are on the bottom of the motherboard. theres a couple holes on the top of the PSU shroud/basement and plugged it in to the mobo. I hope that makes sense.

[@maya-qs6zw]

PCGoblin lol I already solved it but thx anyways.

[@PCGoblin]

Sorry I wasnt able to respond quicker. But Im glad you got it. :D

[@ShwackerSwag]

How the hell did you remove the top panel? I bought this case of a friend without the manual and can't find a video of anyone removing it, I only see a single screw on the back but the top isn't coming off

[@PCGoblin]

Its been awhile for me, but there should be one thumbscrew on the back of it that you undo. Once thats undone then you should be able to pull up on it. There are retention clips that hold it in place so those will cause some resistance.

[@PCGoblin]

Shwacker confirmed with my father in law and One thumbscrew and slide it back a little and lift it off.

[@ShwackerSwag]

Thank you so much!! I been pulling thinking retention clips too but never thought to slide it, that was it!

[@PCGoblin]

Shwacker glad i could help

[@devinwang2967]

u guys just came here for 5:36

[@PCGoblin]

ѕυиѕтσям The best part of the whole video!

[@andrewbat5124]

Nope. 4:38

[@namokoko2671]

If you don't mind me asking how much did it cost?

[@PCGoblin]

It was about $2500. But I dont know the exact cost.

[@namokoko2671]

PCGoblin thanks