Building Fiber Optic Star Ceiling

[@markmiller6402]

Good job mate

[@CLivetv]

Great job! I would have blocked off the light shining towards the front where the screen is 👍🏾

[@kevinolsen73]

We actually did. It was the first thing I noticed when we tested it. 😅 I ended up putting a strip of wood across the front to block the light and straighten up that edge :)

[@kurtsimmons2833]

My equipment contains the AMKI model #QJ-L032 LED Light Engine. Please tell me how you mount this type of device in your project? What do you suggest I use? Thank You!

[@kamalpb3978]

What is the size (dia) of endglow fiber optic wire used

[@rocky8us]

Did you repaint the board after installing the lights? Thanks.

[@YumiiMawneeProjects]

No we did not

[@babysiddique118]

That was cool enough🖤

[@godbound]

Did u guys pull the wire back in for that effct

[@Mawnee]

Once everything is set we simply cut them off flush.

[@simpleasianmatandeverythin1359]

🤩🤟

[@lordrusellejunsay4794]

did you cut the excess strings or just pulled it backwards?

[@YumiiMawneeProjects]

Yes we pulled it out tighter and we cut the excess :)

[@lordrusellejunsay4794]

@@YumiiMawneeProjects thank you very helpful indeed

[@gamingofthelegend3907]

What size of wood did you get?

[@kevinolsen73]

I used 3 4'x8' sheets of paneling. Which gave us a ceiling of 8'x12'. :)

[@gamingofthelegend3907]

Kevin Olsen thank you very much how did you hang it? I’ve got a concrete ceiling so I was thinking of hanging it using the boxing hook thing but I’m not sure if I should use chains to hold it in place

[@kevinolsen73]

@@gamingofthelegend3907 I screwed long eye bolts into the the joists(studs) and used chains :) It was great because I could assemble the whole thing on the ground and just clip the chains on to hang it.

[@gamingofthelegend3907]

Kevin Olsen thank you soooooo much I was struggling with how to put it up you are a life saver salute to u my friend

[@gamingofthelegend3907]

Kevin Olsen if you don’t mind could you tell me what chain you used and if you bought it online could you give me the link thank you very much and sorry if I am bothering you

[@gennmiller9279]

What did ya’ll use to drill the holes? Love it!

[@cplcabs]

A drill

[@TangoAFC]

@@cplcabs 🤣

[@gennmiller9279]

That did sound like a dumb question...Well, I made mine with 4’x8’ foam board insulation. I found it too time consuming to drill all the holes...so I used the screwdrivers from one of those mini-kits for jewelry/battery changes. It worked great, and made it so kids could help out. I didn’t know if you used a drill or punch method. :)

[@kitchentimeinc]

@@gennmiller9279 what thickness rigid foam board did you use?

[@EVILAKUMA]

How many hours job bro?

[@kevinolsen73]

Maybe 10-15 hours. I did this over the course of several days after work. It could probably be done in a weekend. :)

[@alphiome]

How many light engines you used in total for this setup?

[@YumiiMawneeProjects]

Just one with 410 lights. If we could do it again I would use two smaller engines so we could have multiple colors.

[@ekorbajingbonsai3271]

Lampu apa itu bos nama nya

[@Candy-uo8sv]

too even spread