Building Insane Headlights!

[@thewulf7]

Can we quickly calrify... 200 Degrees Farenheit!! Heard horror stories of people in countries who use celsius melting headlights into goop! :)

[@phalanx3803]

come to the metric side water freezes at 0 and boils at 100 its all logical here.

[@thezombino6119]

check your demon eyes link in description

[@thongvu4281]

I've taken apart several headlights, The best way i think is to use a heatgun, go all around frame. Then do one side and use a flathead or something plastic to wedge in there. Continually heat and it'll SLOWLY come out (just twist the flathead to help it).

[@Kaan93DK]

@@thongvu4281 I did it with a heatgun and an old cardboard box. i placed the box on its end, and cut a hole in the bottom, and then stuck a oven thermometer in the middle of the box. then just waited about 20 minutes. and keept an eye on the temp. about 80-90 celsius. if it gets hotter, you can just move the heatgun a bit away. :D (taped of all lifting holes in the box too btw)

[@nickdelong3537]

In countries who use celsius.... THE WHOLE WORLD used Celsius. Everyone besides murica lmao

[@CaptTwo6]

Honestly man I love your vids. I want to get an Evo 8/9 when I get back from Japan and keep my 4 as a show car. You are giving me so many ideas and the level of detail and quality of your vids are top notch. Keep it up and I see you hitting that 100k mark real soon 💪🏼

[@realtywithseankemp9704]

Yes!! Doing the headlights on my w204 c63 amg. Matte black housing and some other stuff not figured out yet but I really like the black spyder e60 m5 headlights design. A clear but black theme

[@sta8ise]

-Honey, where is my headlight? -It's in the oven, right under the beef stew. -Oh ok...

[@Thenevisian]

Wife walks in the door:, babe where the hell is the oven. Husband: I'm JDMing babe

[@bradbozarth2680]

Michael Henville 🤣😂

[@jeremyaprid7008]

lpl

[@DiecastNZ]

2:13 Soapy Wooder*

[@blackjackal2156]

Ah Chris

[@DiecastNZ]

@@blackjackal2156 Dead right!

[@patrickwhitehead7584]

now I want scrapple

[@bigbee4774]

DiecastNZ Chris Fix!

[@AzMarineGhillie]

Thanks for the video, you showed how to do each of the steps and followed up with how much better the lights look after your work on them. Just my opinion but I really like the combo of the paint and lights in each different phase. Very well done!

[@Cobrastarzz1]

@Devin good tip, just get amber translucent film, and cut it and stick it over the indicator area, it works amazing, did it on mine, and it's held up 2 years now

[@thehayze]

They look really good and fit the rest of the car. If you did some black wire loom to cover the extra wire it could almost look factory.

[@davidgriggs3967]

Looks good but i don't think that black coat is going to hold up too well with a bit heat , i would have rubbed them down with 2000 grit or steel wool . Have to give the paint the best chance of adhesion or after a while it will just flake off into the bottom of the light.

[@marcruales8050]

Those lights are dope as hell 🔥

[@Armmani2000]

That's a beautiful car. Black and blue light go very well together.

[@RazoE]

You can always paint that clear piece amber with stained glass paint. On my old IS300, I painted the highbeams yellow, the bezels black, and then the clear signal piece amber and it looked absolutely beautiful 👌🏼

[@ibrarmohammed1679]

You should offer this as a service to people bro, you done an amazing job im sure theres people out there whod want to change their headlights but are afraid to do so/dont like the look of a lot of thr aftermarket options

[@shaunnit]

I think you're the Rain Man of modifications new to the channel but loving it👌🇦🇺

[@corytryon6374]

DAAAAMN!!! LOOKING SICK!! Those headlights really set off your 8!! You have serious talent! Love your videos!! Always looking forward to seeing what's next!! Keep up the grind!! Thanks!!

[@quiet4859]

I like how devin does all the stuff by himself and not from any shops, the real definition of built not bought! 👌🏻🔥

[@brianyazzie6257]

You a genius wit the headlight it looks so dope luv it keep it coming

[@danstough9265]

While I’m not a huge fan of the blue, I think overall you did a killer job of refurbishing and customizing the headlight!

[@woah954]

Wow Bro......They look sick. Excellent work!!!

[@bighoss1592]

Looks badass. I want to do white with annodized red and blue on my 3rd gen dodge

[@AimlessMoto]

blue = cop magnet

[@robertking1032]

haha..you so right, it look like they own it, why?

[@xenthia]

in most states, blue or red in front of any vehicle is reserved for state agency/emergency response vehicles

[@michaelsanders5815]

Very very sick my friend. Well done.

[@lilnoot2942]

Shouldn’t you spray clear coat on headlight after buffing to prevent oxidation again?

[@paulinhofagundes12]

No. You should apply something like Meguiars headlight coating, which is specifically made to protect acrylic headlight lenses from yellowing.

[@lilnoot2942]

Paulo Fagundes Oh ok- thank you!

[@joshuamitch22]

You can spray clear coat but it will eventually fade and peel. Some people ceramic coat them don’t know if that would be better.

[@lilnoot2942]

Joshua Mitch yea I’ve heard stories about the clear coat cracking headlights... didn’t realize there were products out there designed for coating them

[@oriondurdaller3349]

Paulo Fagundes cool

[@NWGarage]

Very cool finished product

[@JaysEvo8]

I did this exact headlight mod except in anodized red and I jdm'd the turn signal in amber came out awesome

[@Soysauce337766]

Good job man . Very detailed. Thx 👍

[@marketwarriorfx]

Hell yea ! headlights turned out noice! Im going to do mine right now.

[@rosenrusev8656]

Simply sick, mate!

[@MrFearless84]

not bad at all. Hope that blue paint doesn't burn from the hi-beams heat!

[@travisallen6299]

They look awesome dude! Thanks for the ideas.

[@lowerstandards1740]

*painting & adding leds to my stock headlights!*

[@someoneWhoSpeaksAbout]

apply the film on the headlight. that film prevents headlights plastic from getting blurry

[@slythemongoose9138]

Awesome video dude! Appreciate how thorough you explained each step and why you were doing everything. Super dope results too... question though: after the buffing the lenses, what do you use to seal them so they don't oxidize/yellow real quick again after?

[@transtubular]

I used Dupli-color Acrylic Lacquer protective clearcoat on mine. 2-3 coats and a year later you couldn't see any sign of yellowing on the lenses.

[@slythemongoose9138]

@@transtubular nice! Thank you sir, that helps

[@paulraper1]

There's got to be an easier way to get a citation

[@KuyaJahred]

Are these mods not legal?

[@joelbravo2690]

@@KuyaJahred not necessarily illegal but you are required to have an amber light.

[@NWGarage]

I have bright white led turn signals front and rear I’ve never been pulled for it

[@daraung8979]

Wow! This is a great video! Very well put together and the headlights came out great too!

[@TejasToolMan]

Looks really good, nice work man!

[@kavneelgounder7881]

Love the build

[@advancednutritioninc908]

Excellent work! Great end product! Liked !! good video!!

[@muhammadibrarjahanbahader3446]

Hey dude, can you demonstrate how to install a rear windshield motor and wiperarm for it, i know this is something off this video but no one will better explain how you does, thanks in advance and by the way i don't have it on my evo 9 GSR by default and willing to add into it

[@saulsierra8431]

Awesome video great content and thanks for sharing what you use for your creations

[@voongnz]

Great mod! Looks awesome.

[@joshgreaves9934]

Looks awesome dude!!!

[@pg1171]

Use ammonia to remove the chrome. It works. Just let it soak for about 12-24 hours, and it will be gone. You still have a gloss finish to deal with, but no more chrome. Just use a little fine grit sand to get rid of the gloss, and you are ready to go.

[@midwill80]

Awesome stuff man! The headlights look great.

[@Fractal_CZ]

How about sealing the headlight back? This method has to result in moisture inside.

[@iustinianmotac3257]

doing great! that ionized blue is dope

[@basictechinformationservic6559]

Cool, I have a 95 Cadillac Eldorado Coup, Metallic Polo green, and I have been wanting to do something with the headlights, but I cannot even find an updated version, any ideas?

[@anarchonireland]

Hi, can you tell me if the lenses are glass or plastic? Many thanks 👊 great work btw 👏👏👏

[@nasimwehbe8410]

Absolutely sick! They look amazing. Awesome work bro.

[@5murf495]

looks great i wonder how it would look with black housng

[@jasonstewart8926]

Great job brother

[@sarge27271]

I love the cinematography. So well edited. Kudos young man. Wow! 30 miles an hour on "Your" backroads sure looks alot faster than in my neck of the woods!! ;) Nice ride. Be safe. Cheers

[@mat24ist]

head lights looks mint

[@kevinz1418]

You're going with the blue scheme i want! love it broski

[@cgazzolo]

Thanks for the video, looks awesome. Did the headlights leak? Did you apply anything to the headlights to help them seal better before baking them back together?

[@andrewthehedgehog911]

Usually color lights make JDM cars look ricey but the black on that EVO is flawless....Nice car, Devin! :)

[@erminofreeman2632]

nice.. props on the custom!!

[@Thunderbyrd.]

That is one of the coolest light mods I've seen!

[@k.a.d.msrt8326]

Probably gonna do my chrysler 300 headlights the same way. Thanks man!

[@fredriclebon5611]

After that work. what about the beam patern this headlight isn't mad for led so the beam pattern was correct? Can you make a video?

[@TheRazorJDM]

Great look! Definitely doing it on my car(s)!

[@genesssisss]

Looks sick! I like it, mad respect

[@aaronrogers7178]

The after effects of the light looks amazing good 👌👍

[@jonahwarner664]

Looks great! Hoping to blackout the headlights for my e92.

[@ernielflores6070]

This is the first video I've seen of yours and I really appreciate the great camera work and attention to detail! Great stuff man 🤙🏼

[@madjoemak]

It looks great!

[@mikechurch1444]

Really cool idea be cool to customize the headlights and taillights for the 2015-2018 focus

[@Genevo9]

Amazing job on those headlights bro! Will definitely try those on my prelude head lights, but i'll keep my evo's stock haha and restoration! Awesome vid!

[@dakotapoppenhagen9048]

Your videos are super dope probably one of the most genuine youtubers!!!

[@ZERODSF]

Thanks for sharing brother

[@anirudhmallikarjun7067]

as long as you don't have to drain out the rain from the lights its cool

[@DimZin]

How's the evo 9? Didn't it have an issue? Btw as for the headlights and looks i'd say keep it simple and it'll be beautiful.

[@scottbeaumont8651]

Amazing work, great video

[@Bluewillicars]

You did fine job. I wanting to do my head lights on my bmw335i.

[@arieljavier1430]

Maybe we can use heat gun instead... what is the spray paint you used?

[@joez.9932]

Always very detailed, congrats on the on the growth of your channel I remember when you had around 7000 subs!! Been watching ever since then✌️

[@CarsOverdose]

That looks so 🔥🔥🔥😍👌

[@saltymotorworks4496]

Dang Devin, great job on the headlights! We are impressed.

[@skratchinator]

Looks great, suprised that you didn't put a sequential turn LED strip in the housing. Many people are too chicken to even bake & open their headlights to put in the LED strip.

[@pbittencourt]

Awesome job!

[@MrShadyss]

Looks great, should make the other housing blue also

[@chadcooperider7912]

Makes it look better

[@SleepyThaDragon420]

When you turn on your high beams does the blue from paint reflect into the headlights beam?

[@SleepyThaDragon420]

Thinking on buying red but don’t want too much to the shine with headlights on

[@luisjosetirado6071]

gracias por los links de los productos

[@jok3yjesu339]

What would have looked good is if you extended the blue onto the lip of the little valance plastic piece but still had the edge of the valance piece black

[@sttm1283]

thats one achient owen :D dont really get that demon light. does it project ambient light to the whole projector or what? installation looks sick though. thumbs up

[@los_87]

Do you have any vids or pics of the evo with the headlights on?

[@aprilparkins9338]

looks amazing

[@skillz101989]

How about an update if condensation builds up or if it's still holding up

[@saby8765]

This duplicolor metalcast is pretty damn reflective!

[@matthewtrumbore2483]

Great video. My buddy is doing his we keep having trouble with the dupli color paint. It keeps cracking in the bowls. We tryed sanding chrome a little then the primer then adhesive promoter then matt black. Seems cut & dry but cracks up every time. Even had new bowls sent & they are doing it also. Does duplicolor have a special trick to it? I'm ready to looe my shit on them idk what were doing wrong. Been painting them for 2 weeks & I'm over it any advice would be awesome. Thank u.

[@janderstefanato4300]

Parabéns pelo seu trabalho...

[@cristianostasu]

what kind of battery is that ? a scooter one ? the headlights are insane!

[@jordynhixson655]

Good shit man. Love what you do with every project build.

[@DENS973]

Nice work devin.👍

[@classyy9532]

Was waiting for this

[@jpwittheheat4446]

Can’t wait to see this car in person. It’s come a long way and still has many more things to come. Dope content Devin keep it up bro!!! Let us so-cal enthusiasts know when ur coming down but only if u bring the Evo8 tho lol. #FULLSNED

[@ivanberra113]

What kind of glue do you used to glued the headlights

[@k.a.d.msrt8326]

Broo sick I want my 300 to have some bad ass looking lights. Ima build some soon. Your headlights are headlights to be proud of building. Sickkkkkkkkk