your awesome George, thanks for all the insight. beautiful work
@CharlesStruble12 жыл бұрын
These are absolutely beautiful. Thanks George.
@89747311 жыл бұрын
Robert, I use a Sharpie (felt marker). Yes, the line does melt away. This is a good question. Thinking about it I can see where it is a problem. I have done so many maple leaves that they line is more of a guide than a pattern. Plus, I I go rather fast so it the line is still slightly visible. An alternative might be to scribe the line into the copper. The copper will still darken but I've found a scribed line to always be visible. Thanks for the comment.
@meanbean989 жыл бұрын
soooo cool cant wait to do this ..wow your videos get right to the point thanks :)
@8974739 жыл бұрын
Thanks. Yes, I like to start, enjoy the process and get it done.
@hugawolf50749 жыл бұрын
Great video! Love the colors!
@8974739 жыл бұрын
Hugawolf: You need to do some KZbin videos. You've got lots of techniques.
@89747312 жыл бұрын
I use an "0" tip for cutting out maple leaves. However, it is not exactly "cutting" but more like severing. The edges are rough. But this is good because it adds to the maple leaf design.
@j2cool212 жыл бұрын
sorry, I had trouble with my tablet. I will ask the question again. What size tip did you use for doing the flame cut out of the Maple leaf?
@nsopceo11 жыл бұрын
I love all your videos, thanks. My question is what do you use to mark out the torch cutting pattern without it melting away?
@Jsoli12311 жыл бұрын
Hey, how do you clean the copper after the cuting off? With acid? King regards from Switzerland.
@halfsilver12 жыл бұрын
great preview! love your vids!
@johnackroyd740712 жыл бұрын
Hi, I want to make a copper water fountain in the shape of a tree, about 6' tall, water is to be pumped up the trunk using 28mm tube for the trunk, 12mm for the branches, using thinner tube as the branches extend to the twig. the water will trickle out and onto the leaves. My question is, should I solder or silver solder?
@NMranchhand3 жыл бұрын
Wow, those are gorgeous. May I ask what model of handle are you using behind that “0” tip?
@8974733 жыл бұрын
That's an off brand torch. Can't remember the name. Will check it out tomorrow.
@8974733 жыл бұрын
That's an Uniweld torch. I haven't used that in a while. Any mid sized oxy/ace torch can do the same job. Just cut out 50 maple leaves last week and used a Victor Performer. Uniweld torch: uniweld.com/product/oxyacetylene-welding-handle/
@NMranchhand3 жыл бұрын
@@897473 Thanks very much, I have the idea now. Where can I see your complete DVD instructions for sale?
@8974733 жыл бұрын
@@NMranchhand Thanks for your query. I've been neglecting that web site and your question got me off ground zero and I reorganized it this morning. Any questions, let me know. www.gsegmedia.com
@grahamclements-turner886810 жыл бұрын
Hi George, your work is masterful. Can I ask what gauge copper you normally work with.
@89747310 жыл бұрын
Graham, I use 16 oz. copper, Which is about 25 gauge or .0216. Sometimes I will use 20 oz, but 95% of what I do with copper is with the 16 oz. The ounce - means that it weights 16 oz. per square foot. So the 20 oz. would be a bit heavier. Let me know what you are working on. George
@traceyklotz12 жыл бұрын
Beautiful!!! Would really like to learn how to do this type of art.
@5809AUJG11 жыл бұрын
Are those welding metal rods you're using for the branches? And do you really cut out the leaves with a cutting torch? If so, how can you get such precision? Amazing! And beautiful.
@89747311 жыл бұрын
RG 45 is a gas welding rod that you can buy at your welding supplier. Same place you will get your oxygen & acetylene. RG 45 is mild steel with a very thin copper sheath. This video offers more explanation: kzbin.info/www/bejne/rabVan99nq92aLc I cut out the copper Maple Leaves with the oxygen acetylene oxidizing flame. (takes a little practice) kzbin.info/www/bejne/novPlIawhriFoa8
@5809AUJG11 жыл бұрын
Thank you, Sir! As you said, what I needed to know about the rods were explained in your video. Sorry for my premature question. And, yes, cutting out those leaves with the torch will take me a LOT of practice...but I'm used to doing things over until I get them right. This is an expected thing for painters like me. But I'm patient, have excellent hand-eye coordination developed as a painter, and I love the details of things. And the joy is in the work, always, for me. I can barely wait to get started in this amazing medium. Much appreciated!
@geneblinick71653 жыл бұрын
I'd like to know how to clean one of these maple leaf sculptures after it has been hanging outdoors for a couple of years. thanks
@8974733 жыл бұрын
Email me a photo of it and I can give you a "best guess". ggoehl@gmail.com
@j2cool212 жыл бұрын
It wasn't text, I had trouble with my tablet and I had thought I re-ask the question while explaining the first question was not meant to typed that way; something must have still gone wrong. I was asking what size tip you use for the flame cutting on the Maple leaf. Sorry again for the mixed up. I made have made another mistake and did not realize it.
@89747311 жыл бұрын
I use a wire brush on a motor. Cleaning the metal till it is all a copper color and then flame coloring. Check out my KZbin video on flame coloring, I think there is a video shot of wire brushing.
@89747312 жыл бұрын
I know next to nothing about solder and very little about silver solder. For fountains I've always used Sil-Fos. It's cheaper than silver solder. Sorry that I can't be of much help as this is not in my area of experience.
@geodezix4 жыл бұрын
how'd u attach stem to leaf....jesus, that's the most important part and u left it out!
@8974734 жыл бұрын
That was just a preview of a full length video. You'll find those videos here: gsegmedia.com/?page_id=4218
@89747312 жыл бұрын
I don't text, so I have no idea of what you are asking.