BUILDING MY K20A DC5R SWAPPED ACURA RSX IN 10 MINUTES *AMAZING TRANSFORMATION*

[@HondaVlogs]

lemme get this track my mannnn haaha. Dude, what a freaking transformation

[@ShadesWade]

ayyy glad someone likes the music lol. "Omar Rodriguez-Lopez " Un Buitre Amable Me Pico & Poincare". crazy to think probably none of this would have gone down the way it did if i didn't come meet up with you and then coincidentally lose the car in a flash flood. NOW KSWAP THE DEL SOL ALREADY :) !!!

[@HondaVlogs]

@@ShadesWade hahahahah. it's hppening..shhh

[@Coda5610]

Dope build my dude! Nothing but legit ass parts!! Neighborhood Jesus!!

[@ShadesWade]

thanks Coda! looking forward to seeing where you go with the new turbo rsx build. definitely has some potential!

[@Coda5610]

Shades Wade thanks! Have you seen the new video? I redid the whole interior already

[@ShadesWade]

@@Coda5610 no! i'll have to peep that tmw

[@Coda5610]

Shades Wade bett!

[@donq3149]

The smoke break 😂

[@richrod4059]

You did in one year what will take me 10 years to do with my DC5!! I haven't even installed the Ktuned CMC/Slave cylinder kit yet!! Time and Money I don't have much of either. Super clean build bro! I love it! #DeadSpiritsD.C.

[@ShadesWade]

nothing wrong with going slower rich! you'll get it done. after i lost my car in the flood i literally was in a traumatic frenzy of trying to bounce back. thanks for all the support. DEAD SPIRITS just aint the same since Lachlan sold his DC2R BUT im going to keep it going. dead spirits will live on

[@markboza6215]

1st off id like to say what a great build with quality parts!i have a 2010 honda accord coupe EX-L2.4 and id like to wake it up a bit does the Druupe air intake make one for the accord??! any advise would be appreciated !

[@MellyP1]

Good stuff bro appreciate these type of videos

[@ShadesWade]

@clout_boi23 thanks bro glad you enjoyed the show. would have like to make it a little more slow pace but its tough to compile 12+ hours of footage into a 10 minute vid lol. lot of work done on the car!

[@cre8tivegarage157]

Nice video , keep pushing and building we look forward to more content

[@dc5justo103]

That red interior though sheesh 🔥🔥🔥🔥🔥🔥🔥

[@brenmizer123]

DC5 JUSTO - Actually I think the Superman Color Combo is Great....

[@skidsandscrewdrivers8329]

Don’t smoke in the caaaarrrrr 😩

[@ShadesWade]

all the interior was out. its going to affect the car lol

[@allmotordc5rallmotorfa575]

Hella legit part list. Very nice.

[@ShadesWade]

thanks bro. lotta time effort and loot lol

[@kalieburrows1427]

Shits beautiful

[@ShadesWade]

appreciate ya. its been a hell of a ride. so much more in store for this one.

[@kalieburrows1427]

@@ShadesWade I have gathered about 80% of the parts I need to turbo. Will hopefully start that project soon

[@chrismuniz8515]

Crazy amazing work 💪

[@jeancruz1044]

Amazing skills bro

[@extendedclips9562]

Had to like the video when u started smoking in the backseat 😂

[@ShadesWade]

tuff! lol

[@kaniijean-louis5259]

How did you do the ceiling red and where did you get the custom seats from

[@ShadesWade]

@Kanni Jean-Louis, unfortunately chances of finding that fabric are slim and none. its discontinued and i had to order it all the way from Australia. you can find something similar at a fabric store but it wont quite look the same. the custom seats were made in an Upholstery shop i used to work at by a guy that did upholstery work for his whole life.

[@lincolnls050505]

You happen to know where to find blue recaros?

[@themadoct]

Crazy transformation brother lots off hours days weeks months put in to it cleannnnnn.n. lol

[@ShadesWade]

thanks dude! all of the footage when i started editing was 10+hours. compiling it all down to 10 minutes was pretty mind blowing

[@cbparker44]

where did you get the red carpet from?

[@ShadesWade]

was made by a local upholstery shop. i have been working there recently for the past few weeks. kinda cool job but im not a big fan of the management lol

[@rockefellertv9363]

Post more often my dude!

[@ShadesWade]

for sure. getting back into it. been kinda slacking on content through the winter offseason. just posted up a new video last night on the fuel system im starting. check it out!

[@batman106]

Looks clean especially in that color! Why no cold air intake for more power?

[@ShadesWade]

thanks dude glad you like it! as for the intake question...the Gruppe M Ram Air System is about the best intake you can get on any level. its a ram air system with a duct that receives air from the hood cowling scoop and rams the air into the intake box and it has a heatshield that protects it from heatsoaking. i've had other cold air intakes like the injen or aem and hands down this gruppe m system takes the cake. very well made and very effective

[@StarlingT5]

Awesome 😎

[@ShadesWade]

thanks dude!

[@chuggiepwum3429]

Is it worth it putting a catback from front to back with a magnaflow exhaust on a automatic Rsx?

[@ShadesWade]

nah not really. the k20a3 in the base rsx isn't exactly a powerhouse. save up for a k20a2/k20a/k24a2 swap.

[@caymanbacon7235]

What headlight bulbs are those? Are you using the stock reflector housing?

[@ShadesWade]

using the jdm type r black housings. oem honda no aftermarket. as for bulbs the stock hid bulbs are still intact and working lol.

[@ShadesWade]

also thanks for subscribing dude! if you like gaming content i also have a secondary gaming channel (Haunted Hills Gaming)

[@jeffersonbagain8358]

are you still on stock fuel pump when you did the k20a motor swap or you upgrade the pump to 255LPH

[@ShadesWade]

initially yes i was just on stock injectors and pump. then i completely rebuilt the entire fuel system from scratch on my garage floor. have a whole video series on the return style fuel system build. grams 750cc injectors grams 320lph pump amg dual pump hanger aeroflow fittings and e85 hose. flex fuel sensor. the works

[@jeffersonbagain8358]

so heres my quick question is it ok to run 255LPH on stock k20a withouy tuning

[@ShadesWade]

@@jeffersonbagain8358 theres no need to upgrade the injectors or pump unless you are going to tune it. its going to run like shit untuned and run way too rich.

[@apeugo]

Where did you get the Red Rear Seats? I can't find them online

[@ShadesWade]

lol you can't find them because they aren't something you just buy. they are custom made seats...had them made from scratch by a great upholsterer. not cheap thats for sure

[@jairpalomar6748]

Where did you get the back seats

[@ShadesWade]

custom made by an upholstery shop. original Recaro material imported from an Australia Recaro seat specialty shop

[@zappiing6151]

Where you get your parts ? I have a Rsx but don’t want cheap parts when I upgrade it

[@ShadesWade]

not just one place. i outsource my parts from many different sites and vendors. kseriesparts / jhpusa / nengun / rhdjapan / k-tuned / skunk 2 / etc. to name a few of the vital companies. hope this helps. good luck with your build!

[@nishy111]

Hey Bro love your Car! I have a question about the k20a engine. I Drive an Australian Delivered Honda Integra Type R it has the k20a2 motor. My question is.. is it worth getting the k20a? Thanks man!

[@ShadesWade]

hey SINISA thanks for the support bro! a lot of people say "whats the point of getting a k20a, it only makes like 20hp more then a k20a2 type-s motor"...WELL it aint just 20hp. when you k20a swap you are getting higher compression, a stronger engine capable of high rpms without having to touch anything, y2m3 transmission with LSD, etc. the short story...the driving experience is nothing like a k20a2. it will make you forget all about your k20a2 engine . hope this helps!

[@nishy111]

@@ShadesWade Thank you Brother 👍🏻

[@ShadesWade]

@@nishy111 no problem! for the 4500$ the k20a and trans cost you could save up some more money and buy a 4PISTON crate engine. they are right around 10,000$ to get in the door BUT 340whp right out the crate guaranteed?! YES PLEASE!

[@nishy111]

@@ShadesWade Time to Start Saving lol Personally I'm a Original type of guy. So I'm most likely going for the OEM K20a! Another Question.. Fuel! How does the k20a Run with 93 octane? In Australia We have 98 Ron.. If I put anything less my car doesn't like it. Thanks again bro!

[@ShadesWade]

@@nishy111 i totally feel you. my dc5r clone was so satisfying to put together. the ultimate puzzle. as for the fuel question i have thought about this before as well. the car came from japan just like australia that premium for you guys is 98ron. here premium is either 91/93 depending on state. my state has 93 and honestly it seems to do very well with 93. i've been entertaining the idea of buying 110 octane race gas and mixing a few gallons in with my 93 to see how the car will perform. only problem is 110 is super expensive for what it is

[@purekush2536]

Is that intake similar to the js racing carbon intake

[@ShadesWade]

in concept yes, but in design...no they are just both carbon fiber. mine is a ram air system. gets air from the top of the hood as where the j's has a long duct that it has to travel through. the gruppe m is about the best you can get next to the mugen one

[@dc5_enice835]

@@ShadesWade how did you get that grippe M intake to fit? I thought that do to the cmc it wouldn't fit. Please tell me how and beautiful car and set up, mine is a work in progress, hope you can pass threw my channel and check it out, everything has been done by my self except parts I have bought lol. Please tell me how you got that intake to fit?

[@entro2envy142]

Do you still have the factory ecu

[@ShadesWade]

no its been chipped with Hondata KPRO Version 4

[@ShadesWade]

there a segment in the video called "Calibrating KPROV4"... ... ...

[@martinguzman7686]

Where did u get the recaro material at?

[@ShadesWade]

imported it from an Recaro Specialty Upholstery shop in Australia. very rare and pretty damn pricey with shipping and i bought the whole 5 meter roll. they said they wont be getting any more of the red :(

[@martinguzman7686]

Damnnn.thank u.did u have to do anything special to get ur k20a to work on ur car?what happen to emerald tunning channel?

[@ShadesWade]

@@martinguzman7686 nah if you have kpro and a type-s the k20a is 100% plug and play. everything should be all good to go. i made it even more good to go buy converting the suspension/brembos/hubs/wheels/etc. this thing is literally a dc5r thats just not RHD. i could have done the RHD conversion but honestly its not worth the time and effort. im left handed and i like to have my dominant hand in control of the steering wheel. shifting with your left hand is strangely odd feeling to me lol.

[@martinguzman7686]

Can u do a video walk around of ur car it really looks amazing.

[@ShadesWade]

@@martinguzman7686 yeah for sure. been meaning to do an updated walkthrough video. trying to get a better camera setup first

[@natewhippin2188]

How much did all this cost ?

[@ShadesWade]

a few bucks lol

[@ItsTheFry]

#SHADES

[@ShadesWade]

#FRYBOIZ

[@fabioatwelve]

nothing like smoking in your car and making it smell like shit

[@Podracerr]

TOO FUCKING FAST! GREAT BUILD BUT I GOT LIKE 4 HEADACHES! LET IT BE 15 MINUTES

[@ShadesWade]

hey when you have 15+ hours of build footage theres really no way around it...don't know what to tell you lol

[@maurdyy3209]

Bruh why do people buy Rsxs and make them look uglier than when they got it blue and red like wtf is that shit looks terrible

[@ShadesWade]

i bet you spank it to cambergang 🤣

[@cnovalles73]

WAY too fast on the speed. Not enough time to actually see (and appreciate) the car and work before risk of a seizure. 😵‍💫

[@ShadesWade]

kinda hard to take 15hrs of raw build footage and compile it into 10 minutes. let me know when you drop your build video and ill make sure to critique yours and take some notes. bet it will be epic

[@cnovalles73]

@@ShadesWade dude if you're gonna get butt-hurt with constructive criticism then stay the hell OFF KZbin! And don't gimme any bull that so many hours can't be condensed at a slower speed yet KZbin is FULL of them. It's not like you created something new.

[@ShadesWade]

great content! keep it up!