All the people talking shit about this project don't know the first thing about anything. To begin with, this is the first DIY 4001 copy I've seen being made with the proper neck-through setup. The PJ configuration is a bit eccentric, but those EMGs are very solid pickups; on the count of the bass being ugly, the whole point of making custom instruments, or really any custom thing, is that you're building something to your own taste and your own taste only. The only things I find were something of missed opportunities are the fact that you didn't include double trussrods and that you didn't wire it up to mimic ric-o-sound. But hey, to each their own!
@MrGeoffreySmith Жыл бұрын
Thanks for your positivity Sandro.
@OlafFichtner3 жыл бұрын
Wow! Most builds I've seen here were by people with a really large machine park, including full-blown CNCs etc. You were using almost exclusively handtools, some even manual. That brings it a little more into the range of mere mortals. Thanks for sharing!
@MrGeoffreySmith3 жыл бұрын
Thanks!! This was my first attempt at a bass build and a proper learning curve. I'm currently trying to build an acoustic 6 string bass, all with scrapwood like before. Some videos are already up. Same tools. Your message was really positive! 😀
@gregoftheyoyo3 жыл бұрын
No way! My first attempt at a bass build was a rick style bass with those Geezer Butler pickups! Great work man!
@MrGeoffreySmith3 жыл бұрын
Cheers Greg! Yep, this was my first attempt and a proper learning curve. That's probably why theres so many videos in the play list for it 😂
@GrahamDallas4 жыл бұрын
It's been a great series, can't wait to hear it.
@MrGeoffreySmith4 жыл бұрын
Sound is on the way!! 😀
@cafeine Жыл бұрын
such a beautiful bass! well done
@MrGeoffreySmith Жыл бұрын
Cheers! It was the first time I'd made one. I'm going to try another one next year 😃
@CMRWoodworks3 жыл бұрын
Cool build! I‘ve always liked the look of the Rickenbacker bass.
@MrGeoffreySmith3 жыл бұрын
Me too, Chris. I had to make one 😀
@voleraabriganov5503 жыл бұрын
@@MrGeoffreySmith fuck yeah.just have finished one.
@omg_wtf2 жыл бұрын
Well done bro, you should be well proud of that work.
@MrGeoffreySmith2 жыл бұрын
Thanks 😀
@NiallLeechphoto3 жыл бұрын
Great job on the build! I'm halfway through my first ever guitar build and started with the same plans. Very detailed and accurate which is helping a lot. I went by the letter and ended up ordering the twin truss rods which need to be routed and then covered.. don't know why I didn't go with a standard single rod like you.. would've saved a lot of hassle and cash! Anyway. Well done on a great build!
@MrGeoffreySmith3 жыл бұрын
Hey! All the wood was hard wood, so all that was needed was a single rod. Please show me the results of your build 😀😀😀
@seph2x5383 жыл бұрын
Well done my guy, You can charge any amount you see fit for this amazing work. Bravo.
@MrGeoffreySmith3 жыл бұрын
Thanks Joe! I'm part way through making a 6 string acoustic bass at the moment. Some of the vids are on my channel 😀
@izzysantiago9782 жыл бұрын
Even though I never like the style and feel of the Rics, you constructed a bass to your own very desire which some may criticize but I'm pretty sure they can't glue 2 popsicles sticks together to make a thicker one. Good Job!
@MrGeoffreySmith2 жыл бұрын
Thanks a lot Izzy! Positivity is always a preference 😁
@rossrichards59364 жыл бұрын
You did a beautiful job. Even more so using scrap materials. Amazing! Would've liked to have heard what it sounds like.
@MrGeoffreySmith4 жыл бұрын
Thanks Ross! I put out a video last weekend of playing it and explaining electrical problems I had. Here's the link kzbin.info/www/bejne/jqaoapx5n8iprZo
@rossrichards59364 жыл бұрын
Since November I have built four rickenbacker style basses (one from a kit and three from scratch). They all have different pickups and electronics. But the beauty of the build is the Roger Rossmeisel designed body. You took it even farther! Great job...btw...I overbuilt the neck on my first scratch bass too. Still sounds great and plays okay. 😁
@MrGeoffreySmith4 жыл бұрын
@@rossrichards5936 over engineering the neck is typical me. I've learnt a lot for the next one.
@rossrichards59364 жыл бұрын
@@MrGeoffreySmith It's really fun and you may want to experiment with the electronics and pickups.
@Conveop Жыл бұрын
I really want to build one and this is a very good video to start research
@MrGeoffreySmith Жыл бұрын
Great to hear. This was the first one I built and its additive. I hope you enjoy building yours. On my channel there are other videos of different parts of the build, showing more detail.
@josephkunath41732 жыл бұрын
I'm impressed. Very nice bro.
@MrGeoffreySmith2 жыл бұрын
Thanks Joseph! I'm improving 😃
@lomaloma746 Жыл бұрын
oh jesus, the bass looks like dr. Frankenstein and Steavie Wonder built an instrument together
@MrGeoffreySmith Жыл бұрын
Nice one! 🤣🤣
@Adventuresfromtheshedofdreams4 жыл бұрын
Great reuse of timber. You must be chuffed with it 😀
@MrGeoffreySmith4 жыл бұрын
Thanks! This build was a real learning curve and I loved every bit of it. 😀
@javicampins8547 Жыл бұрын
Tio, eres un Maestro !!!!
@MrGeoffreySmith Жыл бұрын
Wow Javi! Muchas gracias! Maestro es un poco demasiado, pero gracias 😎😀
@FulcrumsEdge2 жыл бұрын
Active EMG pickups do not need shielding tape or conductive paint to reduce noise from RF interference, one part of the overall premise of active pickups is to send a balanced/self powered, IE "noiseless" signal to your amplifier.
@MrGeoffreySmith2 жыл бұрын
Yep, true, but these pickups are passive.
@michaelvaldes481025 күн бұрын
Great Build! I was trying to build a Rickenbacker myself and have had a hard time finding a good plan. Could you help me in finding where you got your plans or point me in the direction of a good resource? Thanks!
@jeanmidu133 жыл бұрын
wouha elle est juste magnifique en plus avec les micros EMG qui vont bien , quel beau travail
@MrGeoffreySmith3 жыл бұрын
Thanks! Yes, the EMGs sound great 😀
@dubjedi3108 Жыл бұрын
Great job
@MrGeoffreySmith Жыл бұрын
Thanks a lot 😀
@dubjedi3108 Жыл бұрын
@MrGeoffreySmith I've never been a fan of Rickenbackers but you might just have turned me with this one
@MrGeoffreySmith Жыл бұрын
@@dubjedi3108 for me, its the shape. Ive always loved it.
@unamericano Жыл бұрын
Absolutely gorgeous. Is there a sound test? I have those same black flats on my fretless and I'd love to hear them on this beauty.
@MrGeoffreySmith Жыл бұрын
Thanks. Yes, on my channel. Thanks for watching. 😀
@marcelopose2 жыл бұрын
Excelente trabajo!! Yo tambien soy Luthier aficionado, es mi hobby preferido. Hace 6 años hice para mi hijo mayor un bajo modelo Gibson Thunderbird. Utilicé un marco de cedro de 2 pulgadas de espesor de una puerta antigua. Quedó perfecto y con muy buen sustain debido a la antigüedad de la madera y su densidad.
@MrGeoffreySmith2 жыл бұрын
Muchas gracias Marcelo! Tango unas ideas para mi aproximo bajo. 😃
@marcelopose2 жыл бұрын
@@MrGeoffreySmith en qué país vives?
@marcelopose2 жыл бұрын
@@MrGeoffreySmith yo soy de Uruguay
@MrGeoffreySmith2 жыл бұрын
Soy del UK. Hablo un bien nevel de Español por que vivo en España para casi vente años.
@scaccu3 жыл бұрын
Rick & Decker
@fonz4relli2 жыл бұрын
Where did you get the plans for this? I can't find them anywhere.
@guzzis3 Жыл бұрын
I found them in many places. I bought a left handed version download pdf from etse I think it was. There are other suppliers, possibly not in USA as rickenbacker are aggressive at suing people..
@Isaiah-ft5nx3 жыл бұрын
Wow! Fantastic! I read that you were having electrical hiccups, but how does the bass feel overall? How's the bass holding up 6 months later?
@MrGeoffreySmith3 жыл бұрын
EMG were great helping me out with the electrics. The bass is holding up a treat. The only thing I'd do differently is not have the the fretboard as thick. That's a lesson learnt and I am now making a 6 string fretless acoustic bass with that in mind. I released vid #3 for that last night. Thanks for watching!
@urbannpa2 жыл бұрын
I need to make a left handed version. What is the blue you used for the neck makers? Is it paint or poly mixed with paint?
@MrGeoffreySmith2 жыл бұрын
Hi Pete. It's a product called Milliput. It comes in two parts. Once you've molded the two together you have about 20 minutes working time. It drys as hard as iron.
@Mephistotheles3 жыл бұрын
Nice work considering what you had to work with. However there seems to be gaps between the body , top and also the neck joint. It could become a problem in the long run. Still very impressive craftsmanship nonetheless.
@MrGeoffreySmith3 жыл бұрын
Thanks! The gaps are just cosmetic. It still plays great a year later 😀
@albertlarroca12712 жыл бұрын
LOVE IT !!!
@MrGeoffreySmith2 жыл бұрын
Thanks! It's been a year and it still plays well. 😀
@kylestuart27225 ай бұрын
Shoulda named it the Stickenbacker
@MrGeoffreySmith5 ай бұрын
There's something in the works I've called exactly that 🤣
@anttipulkkinen61962 жыл бұрын
Quite nice, but aren't you using any protective devices for hearing (e.g. plugs) when using routers and other electric tools?
@MrGeoffreySmith2 жыл бұрын
Usually not.
@malmaclachlan30882 жыл бұрын
need protective hearing devices to protect from the bloody awful music in the video
@MrGeoffreySmith2 жыл бұрын
Turning the volume down normally does the trick.
@obamagamer55313 жыл бұрын
where did you get the bridge and tuners?
@MrGeoffreySmith3 жыл бұрын
Amazon. Typed it in a browsed. There's loads on offer, in all price ranges.
@barbaraepsaro27182 жыл бұрын
The best ric ever
@MrGeoffreySmith2 жыл бұрын
Thank you very much Barbara! 😊 😀
@MrGeoffreySmith2 жыл бұрын
Cheers Thom! The bridge I used is just a no brand sort of thing but its chunky. I'm really happy with the Geezer emgs. The only thing I have to improve is the neck. Because it was the first one I made, I made the neck too fat. I'm going to redo it soon.
@Everythings_Adjustable4 жыл бұрын
Great video! I really liked all the talking bits 👍 😁 When are we going to hear it Mate?
@MrGeoffreySmith4 жыл бұрын
As soon as I've sussed out how to record sound properly with an audio interface. It's coming! 😀
@Everythings_Adjustable4 жыл бұрын
I have enough trouble trying to talk on mine so I can't help 😂😂😂
@MrGeoffreySmith4 жыл бұрын
@@Everythings_Adjustable your channel is one of my UK favourites, so you don't have to fix anything. 😀
@Everythings_Adjustable4 жыл бұрын
@@MrGeoffreySmith What do you mean ONE of them???! 🙄 😁
@MrGeoffreySmith4 жыл бұрын
@@Everythings_Adjustable The! Only! (Shit, am I in trouble now....) 😂
@blackcatsabretooth88523 жыл бұрын
Ditambah check sound lbh mantap dan meyakinkan 👍
@MrGeoffreySmith3 жыл бұрын
Thanks 😊
@MG-vo7is2 жыл бұрын
Nice.
@MrGeoffreySmith2 жыл бұрын
Thanks MG 😀
@ejmusicofficial3 жыл бұрын
Is the wood varnish a good substitute for lacquer?
@MrGeoffreySmith3 жыл бұрын
Hi Emilio. It's been on for over a year now and looks just as good. I'm happy with it.
@SixStingsDarko3 жыл бұрын
Excellent work! Where can I find the Rick drawings you have there?
@MrGeoffreySmith3 жыл бұрын
Thanks! I found these online.
@voleraabriganov5503 жыл бұрын
Great!like d-bass.
@MrGeoffreySmith3 жыл бұрын
Thanks! 😀
@voleraabriganov5503 жыл бұрын
@@MrGeoffreySmith building one too.from ash and maple xD right now
If you go to my channel and then to playlists you'll find all the videos involving building the bass. There's a video just about the frets. 😀
@nostalgia_junkie11 ай бұрын
@@MrGeoffreySmith thank you!
@MrGeoffreySmith11 ай бұрын
My pleasure 😀
@danyo3 жыл бұрын
great job man.I was looking for the plan paper but it´s spensive to bu it ( I´m from Chile)
@MrGeoffreySmith3 жыл бұрын
Thanks! Shame you cant get the plans. The plans I used were from the UK, so they weren't expensive. Do you know someone who has a Rickenbacker you could make a template from?
@danyo3 жыл бұрын
@@MrGeoffreySmith I found looking for a lot of place but I get one in dwg (autocad) and make a little adjustes and thats all
@MrGeoffreySmith3 жыл бұрын
@@danyo great. Have fun with it! 😀
@diegoq84173 жыл бұрын
@@danyo ¿Me los pasas?
@danyo3 жыл бұрын
@@diegoq8417 dame tu correo o agregame en facebook nelson_araya@live.cl
@MateusSouza-tb2ts4 жыл бұрын
hey friend, could you give me the measurements of the body of this bass or in pdf file? if not comfortable
@MrGeoffreySmith4 жыл бұрын
I dont have a pdf, only the paper plans. Which measurements do you need?
@MateusSouza-tb2ts4 жыл бұрын
@@MrGeoffreySmith I only need the length of the body and the total width of the body. I looked for these plants everywhere and I couldn't find them and thank you very much for your help
@sandarumadushan67483 жыл бұрын
Can you give a plane of bass guitar ❤️
@fredtaylor33224 жыл бұрын
Loved it so far, But, Does it work
@MrGeoffreySmith4 жыл бұрын
It works, dont worry. I'm sussing out how to record sound properly. 😀
@donpasqudo38313 жыл бұрын
...the sleep of reason breeds monsters, sorry, bro ...
@voleraabriganov5503 жыл бұрын
bass for Monster Thrash metal.
@Bunnytoes6663 жыл бұрын
Hey Gee-off! ( Did you get THAT growing up like I did? Probably not because the CORRECT spelling is forefront in Britain! ) Anyhoo - Geoffrey means "Godlike" in many baby name books - just so you know..... Watching this is making a certain body part of mine "Chuffed"..... I don't want a KIT, but to build one and throw it to Rickenbacker - why the fuck do they charge sooooo much nowdays? My first 4004 I bought in 1992 was $1200 CAD. Now the same goddamn thing goes for almost $4k CAD!!!!
@Bunnytoes6663 жыл бұрын
And to top it off, he's not using $10k worth of woodworking tools!
@MrGeoffreySmith3 жыл бұрын
The prices are insane, right! I loved every part of this build, so much so that theres a second one going on in the background. Yep our spelling of Geoffrey was the norm for my generation in the UK, but you do see the J version also now. 😂
@Bunnytoes6663 жыл бұрын
@@MrGeoffreySmith I believe the "J" version is Americuhnized ! Where in Hell did you get those pickups?
@MrGeoffreySmith3 жыл бұрын
@@Bunnytoes666 I typed 'Geezer Butler EMGs' into Amazon and there they were! 😀
@Bunnytoes6663 жыл бұрын
I suppose it's only what 927am there? Hahaha! It's 1:28am here!
@stealingtomorrowband Жыл бұрын
Where did you find the plans at? Great job by the way
@MrGeoffreySmith Жыл бұрын
Thanks! I searched Rickenbacker bass plans online and eventually found a company who sold them.
@stealingtomorrowband Жыл бұрын
@@MrGeoffreySmith thats cool man. I've been working on saving up to buy a Warwick myself but i have always wanted to try and build my own. With technology today anything is possible. In my area about 45 minutes away is a wood company that supplies wood to Gibson and PRS guitars and i probably could get some really nice wood from them... Thanks again for the info and video
@MrGeoffreySmith Жыл бұрын
That's great. See if the company have an offcut bin. Who knows what you could find. Enjoy it! 😀😀
@guzzis3 Жыл бұрын
I found a supplier on etse I think it was and downloaded them for I think it was $15AU. When you have an electronic copy you can print as many as you want so for example cut up a set to make templates. Just another option....
@jeancaballero38132 жыл бұрын
Lastima y no comparte el plano de fabricacion jejeje
@MrGeoffreySmith2 жыл бұрын
Lo siento Jean. Buscar por internet. 😀
@TheDead13sky3 жыл бұрын
Что это за наркомания? Ты ж не палеты строгаешь. Ну чувак старался, конечно...но некоторые моменты очень странны
@voleraabriganov5503 жыл бұрын
ага.но всё равно он жжет.напоминает эксплорер который я сделал в 98 ом году ))
@groovernator2 жыл бұрын
Thank you, I threw up because of what I saw.
@MrGeoffreySmith2 жыл бұрын
Best comment yet! 😂
@patricklink85272 жыл бұрын
I'm being a bit of a smart ass here but the quality of your luthier work aside. Which is excellent by the way. Still leaves you building a Bass that looks like a Rickenbacker. But in fact is not. A more appropriate name would be I built my own Bass that looks like a Rickenbacker.
@MrGeoffreySmith2 жыл бұрын
Or I could call it a Notenbacker 😀🤣
@7070Raneri2 жыл бұрын
You did great, but sorry: there is no Rickenbacker bass than a Rickenbacker bass ..
@MrGeoffreySmith2 жыл бұрын
Thanks! Yes, you are right, which is why this is a Smithenbacker 😀
@user-sk7bm9zo1g6 ай бұрын
Absolutely disgusting design 😢😢😢👎👎
@MrGeoffreySmith6 ай бұрын
Cheers! 😀
@js32172 жыл бұрын
Sorry, but that is the ugliest fake Ric I've ever had the displeasure of seeing.
@MrGeoffreySmith2 жыл бұрын
Now that's a shame. What's done is done.
@MrGeoffreySmith2 жыл бұрын
@@liamhohertz4807 Cheers Liam. Our tastes are all different and variety makes the world go round. Last night I played it through a big muff fuzz pedal and a Dunlop wah. Sounded great 😀
@kurtrichardson59642 жыл бұрын
Go ahead and do better or shut up
@js32172 жыл бұрын
@@liamhohertz4807 Yeah, I'm jealous of a guy who built the ugliest fake Rickenbacker I've ever seen, when I have a real Ric 4003W hanging on my wall.
@js32172 жыл бұрын
@@kurtrichardson5964 I've never built a guitar in my life, and I already know I could build a better Fakenbacker than that one.