Building the Hasegawa Mitsubishi Ki 46 Type 100 Dinah 1/72 Scale Model Aircraft

ScaleAton presents Building the Hasegawa Mitsubishi Ki 46 Type 100 Dinah in 1/72 scale
Support Scale-a-ton!
/ scaleaton
Facebook
/ scaleatonscalemodeling
Follow me on Instagram!
/ scale.a.ton
For high-res pictures
scaleaton.blogs...

[@Scaleaton]

I am very sorry for the disaster that all my Greek friends are experiencing. I wish they would get back to normal as soon as possible and and to be well.

[@matgof03]

Scale-a-ton what's happening i just woke up

[@Scaleaton]

They are fighting with wildfires.

[@ΚώσταςΔαλιάνης]

Thank you very much dear friend!

[@jamescreswell9037]

Kudos for achieving such a fine result in 1/72. I have this in Tamiya's 1/48 version and couldn't imagine me even attempting to build it in 1/72. Yes, older eyes and fingers.

[@simonwaite5815]

Thank you for the excellent tutorial. The black basing technique is very effective and the blending of colors created great tonal variation.....and who would have thought flat flesh! Best wishes from Australia!

[@cyberpunkrocker]

Strange. Although there's the 37mm gun barrel on the roof, I didn't notice from the video whether you built the gun parts within the rear cockpit. Instead there seemed to be a camera on the floor. Correct me if I'm wrong. but it seems that instead of building the correct Ki-46-III-KAI nightfighter (the only armed Dinah version) rear cockpit you used the parts for the Ki-46-II reconnaissance version.

[@VonRammsteyn]

Awesome! Japanese models are rarely shown, but the have a good amount of charm. I love them. Amazing work!!! U r the best!

[@simonetrovati4962]

Great video as always! i like the fact that you show japanese aircraft other than the classic Zero. I build mainly japanese aircraft, but you don't see them too much around.. i'm starting a triple build of the three "cousins", theKi-61, MC 202 and Bf 109 E, but i will mix them up: the 202 in japanese markings, the 61 in german and the 109 in italian ones. Your videos will be a great help!

[@grownjohnboy]

I really enjoyed building Tamiya's KI61 Hein. It has this amazing and difficult camo that took me 4 summer nights to complete all the green squiggles. It is part of my growing collection of Japanese aeroplanes and I want to build this one next.

[@FineKits]

That looks amazing. Hope I can achieve a finish like that some day. I just finished the Tamiya 1/48 Dinah a week ago.

[@T3mpestwulf617]

I've taken to using the white sqiggle/fill method on my models and it gives such an excellent depth. My 1/72 Airfix P-40B in desert scheme came out a real gem because of it. I might've been model building 20 years, but learning a new method to enhance the finish is always a win win outcome.

[@japaokawa]

Love your videos! Greetings from Brazil!

[@hiromirodriguez7192]

Sukhoi Su-25 Please :D

[@theblytonian3906]

Beautiful job, but just watching you work with 1/72 cockpit PE give me nightmares. = ] Eyes and fingers too old to even contemplate 1/72 these days. Great subject, and you have done it proud.

[@matgof03]

I was so excited to watch it when i saw the thumbnail😀. Awsome job👏👌 continue like this. Could you do an f16C in 1/48 scale please🙏?

[@Scaleaton]

I will build a Turkish F-16C after the new Tamiya F-14D. I have the kinetic kit and some resin sets.

[@brianc1701]

Another breathtaking build, especially considering the small scale. I very much like your take on the upper camouflage color...no differences in option on WWII Japanese colors! ;)

[@grownjohnboy]

After watching this I finally got it. Shading is light layers.

[@Gunsandscience]

I really recommend to watch fine kits

[@SmallSoldier]

Cool. Certainly a different looking camo scheme.

[@narce160th]

was so excited when I saw this pop up :) Would love to see a 1:48 model, anyway keep them coming love this stuff!!

[@Scaleaton]

How about the new Tamiya F-14D ;)

[@narce160th]

I can not wait!!

[@DannyBoy777777]

Good job. Nice and interesting aircraft

[@Gunsandscience]

Even though he has one build video

[@Gunsandscience]

And watch his results with a brush

[@TheModelGuy]

The pitchfork subtitle made me laugh. Fantastic work Scale, I've been closely following your videos and they are really helping improve my abilities.

[@ludoviclonchamp2685]

superbe réalisation sensei !!!!! and BANZAI !!!

[@suno_grimm1264]

I like how it looks like a junker plane

[@darwinci]

what's the name of the first song??

[@Gunsandscience]

To me this is one of the most bueatiful plane great job although I would have painted it in the green but still great job

[@МаксимСазонов-р1ф]

Доброго дня. Я бы хотел попросить разрешения у вас, поделится ссылкой на это видео, на сайте scalemodels.ru/modules/forum/viewtopic.php?t=75740&postdays=0&postorder=asc&start=0 ( Good day. I would like to ask permission from you, share a link to this video on the site ) с уважением Максим.

[@Scaleaton]

Hello, thanks for asking. This is a public KZbin video you can share where you can. Cheers!

[@МаксимСазонов-р1ф]

Спасибо!

[@boblanigan2988]

Excuse my ignorance, but I've noticed on a lot of your videos you use MLT or IPA when thinning different colours. Is this because the produce a different sheen or some other reason?

[@Scaleaton]

With IPA, you can apply more translucent layers. MLT is more suitable for sharp-edged lines. Also IPA for all acrylics, MIT for glossy acrylics and all lacquers.

[@boblanigan2988]

@@Scaleaton Thank You

[@natedrawsthings]

I'm sure this will sound weird, but I find these videos very soothing. Especially with the music at the end. My mom died a week ago today, so I'm kind of messed up. I've been focusing on my models as a bit of a distraction, as well as watching build videos like this. I'm amazed at the detail you're able to give 72nd scale planes. I'm hoping I can apply these techniques on my 32nd scale Dauntless, successfully. Keep up the great work.

[@JedenSiedemDwa]

Perfect done. Looks very well. Black basing is great technique! ;) All the best for You! ;)

[@craigwest8386]

Top notch...as always

[@FastandAgile701]

Just perfect! Belki modellerinizi ileride mermi izleriyle, hasar almış parçalarla donatırsanız yani savaştan çıktığı belli olan bir kuş yaparsanız sizin elinizde etkileyici olabileceğini düşünüyorum. Diğer model kanallarında bugüne kadar yapanı görmedim :) hem yeni bir içerik üretirsiniz hem de değişiklik olur. Tabi ki sizin kararınız abi modelleriniz her türlü güzel :)

[@Scaleaton]

Merhaba, evet görmemeniz normal zira referansınız yoksa veya canlandırma yapmıyorsanız pek tercih edilen bir durum değil. Yapılmış olanların da çok başarılı olduğunu söyleyemem. Zira plastik çok kalın ve o etkiyi vermiyor. Ancak o paneli kazıyıp, yerine metal bir levha koyup, onun üzerinde başarılı bir efekt yakalamak mümkün. Kanalın ulaşmasını beklediğim bir nokta var. Oraya ulaştığında yapacağım çılgın şeyler var ve dolapta hazırda bekliyor. Bu kadarını diyeyim ;)

[@arturbaluyev2873]

A wonderful plane you've made! Very beautiful. Btw, what did Japanese aviation fans say after all? Did you match the colours? :)

[@lexas1]

That's some advanced sorcery going on here. Well done. Why the brown camouflage I wonder.

[@kazualfa1310]

that's great! you can clean and ues the parts of the runner of clear parts by scraing the identification light of the reft light and right rear,itis beautful,and it is not so diffiault to cut by little by protecting the fuselage part with tape.itnis a very popular methad in japan!

[@ziyorge1280]

Здравствуйте, очень красиво получилось)👍😊

[@isaacnickel]

NAME OF THE SONG?

[@KillBoxScalemodelling]

Great build and video, the end result looks fantastic! Keep up the good work :D

[@samuelhobbs3107]

Hey, awesome build, I’ve seen you use Lighter fluid for your washes recently, does this have any advantages over using white spirit or turpentine?

[@Scaleaton]

Yes it's way better than anything ever used. Fast drying, high viscosity etc.

[@richjameswade]

Just don’t have a cigarette anywhere near it afterwards or kaboom!!!

[@samuelhobbs3107]

Scale-a-ton okay thank you very much for the reply.

[@brianseward9099]

Really love what you did with the paint job- excellent work!

[@Ettoredipugnar]

Great job !

[@kjaesp]

Interesting subject, great execution. I love seeing more and more marble coats over hard pre- and postshading which looks way less convincing and isn't really an easier way of doing things either.

[@stevetuck7684]

I forgot to ask ,when you use leveling thinner , is that the same as IPA ? , and why do you thin it so much , what does that do ?

[@Lotnik102]

Thank you for masking pattern :) Very helpfull !

[@zaphod70ITA]

Fantastic job! following your videos I learn a lot of things!

[@lapinjaune7691]

Woooh. That's disgusting how the final result is awesome! Great, as usual!

[@МаксимСазонов-р1ф]

Доброго дня. Как всегда, получился маленький шедевр. Поздравляю! Видео у вас получается, очень информативным.

[@Tasmanialupo]

Lovely❤

[@michaelnaven213]

Outstanding piece of art,well done.

[@RaduB.]

Hi! The Japanese phase! 🙂 (I noticed an error in the color description: "Flat Brown" from Tamiya should be XF-10... Anyway interesting choice because it has nothing to do with yellow+green that Hasegawa is suggesting.)

[@Scaleaton]

Hi Radu! Thanks for the feedback :) I made that mixture for the F-15DJ and realize that this is what I am looking for Dinah :)

[@danjohnson7170]

Excellent work once again. Thanks for sharing.

[@paolovulpiani7630]

Very nice .... compliments are due... you did a great job

[@piotrstrzelczyk5013]

Polish Khaki?

[@6988kid]

I remember building this when I was a kid. Thanks for the memories, sir!

[@mandm1642]

Can you please tell me where you got your airbrush from

[@oyku.akbulut]

Perfect Build! Flawless. Kanalı ilk gördüğümde PLASMO'nun bile yorumda tebrik ettiğini gördüm o kadar başarılı ki modeller. Bu kadar iyi bir boyama ve detaylandırmayı hemen hemen hiçbir kanalda görmedim. Sorum şu hocam, bu boya/alkol/yapıştırıcı/dolgu/decal sıvıları vs. malzemeleri Türkiyede temin etmek zor mu? Bu modelleme işine bende girmek istiyorum 18 yaşında öğrenciyim ama ne eğitimi alabileceğim bir yer var ne başka bir şey duydum bu işle ilgili. Çalışmak için uygun bir atölye var ama ne malzemeler alarak başlamam gerek hiç bilmiyorum.

[@Scaleaton]

Merhaba Öykü, yorumun için teşekkürler. Malzeme temini hiç zor değil ancak ben başladığımda bir dolar, bugünki altı sıfır atılmış paramız ile yaklaşık 0.97 kuruşa denkti ve küçük bir bütçe ile her şeyi alabiliyordunuz. Şimdi ise tam bir atölye kurmak için küçük bir servet harcamak gerekli neredeyse. Bir öğrenci için önereceğim şey Revell marka ve Kore kalıp maketlerini yaparak başlaman. Mesela 1/72 Tornado ve F-4F Phantom gibi. Quick Kits kanalı fırça ve basit malzemelerle güzel modeller yapıyor. Başlangıç için o seviyede devam etmeni tavsiye ederim. Baktın sıkılmadan devam ediyorsun ve beş, on model bitirdin, o zaman sonrasını konuşuruz ;) Malzeme temini içinse Hobbytime ve Hobbymodels sitelerini tavsiye ederim. Boya olarak Vallejo fırça serisi, kırtasiyeden çeşitli fırçalar, Tamiya yapıştırıcı, sprey parlak ve mat vernik yeterli olacaktır. Eğitim için KZbin yeterlidir ve hatta mükemmel bir kaynaktır, Başarılar!

[@oyku.akbulut]

Çok teşekkürler hocam. Fırça konusunda şu sorum var benim model deneyen bir arkadaşım modeli fırçayla boyasında boyanın homojen dağılmadığını gördüm. Fırçanın çekiliş yönüne göre ve bazı noktalarda kalın/damla boya izleri çıkıyor. Bunlar ustalıkla atlatılabilir mi yoksa airbrush şart mı ?

[@Scaleaton]

Öncelikle bu bir hobi, hiç bir şey şart değil. Dilediğiniz gibi yapabilirsiniz. İleri seviye modeller yapmak istiyorsanız ki size hobiye giriş için asgari şartları önerdim. Daha sonrasını bir kaç model bitirdikten sonra düşünürsünüz. İlk modelde takılacağınız konu fırça boyasının homojen olması değil, tesviye ve montajı düzgün yapmanız olmalıdır. Önerdiğim boyalar, tecrübe edinildiğinde fırça izi bırakmayan boyalardır. Kolay gelsin.

[@JohnBallJohn]

You are a great artist and a great teacher!!! Thank you so much for your uploads. BTW as I spend hours waching your videos and trying to improve myself a lot of questions appear : 1. You almost never use surfacer. Do you think Tamiya or Gunze colors bond on plastic as strong as surfacer ? 2.Do you wash the plastic before painting ? and if yes with what ? 3.Your 1st layer of paint usually is thinned with ISO do you think if diluted with ISO it bonds better than if diluted with Mr.Leveling thinner? Whats the difenance in properties of paint if thinned with ISO or Mr.Leveling Thinner ? 4. After using Aclad metallics do you seal them before painting acrilics on top ? or before spaying hairspray for chipping ( Corsair video) 5. Do you use decal softeners? 6. What varnish do you use before panel lining? 7.How do you stick painted parts on painted surfaces with Tamiya glue ??? Do you scratch the are to be glued ? OK ...ok I have 100s of questions and i am getting stupid . 1000 thanks for the uploads again. Looking Forward for your next project

[@Scaleaton]

Hi Giannis, Thank you very much! 1. No they are not strong as a primer. I recommend using Mr Surfacer primers before painting but it's not necessary if you can handle to complete model without damage to painted surface. 2. I don't wash new or modern kits. I only wash short run or resin kits with PBW but any oil remover would be great which you use in kitchen. 3. I use IPA beacuse it's cheap. That's the only advantage over hobby thinners. 4. nope 5. Yes, Tamiya Stron and Microsol is my favorite. 6. I always use X-22 7. It's MEK in the Tamiya bottle ;)

[@gerdhennig6461]

Perfect !!#!! I like it, thank you !!##!! *****

[@MLaskun]

As usual awesome video and beautifull work on model :)

[@msuluk]

Her zamanki gibi harika bir model ve video olmuş. Tebrikler. Iwata klonu olarak tanımladığınız iki farkli airbrush gördüm. Birinin arka kısmı siyah diğerinin linkini rica edebilirmiyim?

[@Scaleaton]

Teşekkürler! İkisi de aynı, sadece eski olan zaman içinde ölen bir airbrush parçalarıyla modifiye edildi. Orjinal halleri birebir aynı yani. Yurtiçinde kendi markasını bastırıp satan bir mağaza var. Ben acelem olduğu için üç beş fazlasına bakmadım oradan aldım. Videoda kullanılan siyah saplı olan bu www.turkeyairbrush.com/DUAL-ACT-AIRBRUSH-BADSECTOR-136-020mm,PR-672.html

[@msuluk]

Çok teşekkürler. Yıllardır airbrush kullanmama rağmen halen sorunlar yaşıyorum. Memnun iseniz sizin kullandığınız modelden bir denme yapayım.. Yeni videolarınızın devamını sabırsızlıkla bekliyorum.... Başarılar .

[@blacknass1943]

😘🤩🤩🤩🤩

[@AirbrusherStudio]

Supper ! your painting is amazing !

[@bebetodosantos8131]

Excelente video y los sviones muy bien elaborados felicidades.

[@sebastianariasduval1458]

Awesome work as usual. One quick question. Is there a rule for choosing leveling thinners vs alcohol as the thinning medium?

[@Scaleaton]

I prefer alcohol for thinning Tamiya and Gunze acrylics. It's cheap and I don't like the smell lacquer thinners. I always use highly protective masks but room smells a few hours long :) I use lacquer for thinning enamel and lacquer based paints

[@TiberiusCat]

Do you have a list of the tools you use posted somewhere? I'm interested in the straight tweezers you use. Your work is beautiful!

[@Scaleaton]

I use Proskit Tweezers. It's 1PK 105T

[@vitalsilva922]

Espetáculo parabéns.

[@briandiehl6184]

love the color, very cool looking plane

[@BaidakAV]

СУПЕР!! СУПЕР!! СУПЕР!! СУПЕР!! СУПЕР!! СУПЕР!! Отличная работа!!

[@chrisblancodioramas9296]

hello im a big fan of your work, are you planning to build a BLACK WORN AIRCRAFT SOON? those WWII black planes are my goal i believe those would be great maden in your practice. tks alot

[@Scaleaton]

Thank you Chris. Direct hit! I am working on the ICM Do 215 night fighter in "black worn" paint scheme. Stay tuned!

[@chrisblancodioramas9296]

WHEN DO YOU ESTIMATE BE UPLOADED?? JUST ASKING.... THANK YOU SO MUCH FOR YOUR TIME AND FOR WHAT YOU ARE DOING , SHARING FROM SOMEONE WHO KNOWS IS A GENTLEMANS THING ... GREETINGS MY FRIEND

[@Scaleaton]

It will be uploaded in 2 weeks (I hope) Cheers!

[@TheTechima]

Hello, I would love a behind the scenes video because I am trying to find out here do you position your camera... it is in front of your chest? Best regards!

[@Scaleaton]

Hi, I converted a Ikea lamp to camera mount. You can find some videos on KZbin how to do that.

[@TheTechima]

Thanks for the tip! Best regards!

[@stevetuck7684]

I echo your sediment's about greece mate , lovely build as usual too .

[@deanaldi933]

"sentiments?"

[@georges.8269]

When applying X-22 Gloss do you mist it on in several light coats or do you try to go for the (for lack of better wording) 'wet coat'? Thanks heaps and keep up the awesome videos!

[@Scaleaton]

Thank you! First few light coats mist then few heavy wet coats would be better.

[@georges.8269]

Thanks for the quick reply :) The annotations explaining mixing ratios are incredibly helpful as I pretty much exclusively use what you use. Cheers!

[@hensleyshobbies-doug7761]

Looks like the real deal! Nice 👍!

[@michelecatozzi6856]

Sei un Top Player!!!💙💚

[@jerryvolpini7987]

I don't know about those angry Japanese modellers with pitchforks but looks pretty damn good to me - lol 😉 Very tricky canopy - like the masking tip. You do manage to get a lot out of these small-scale kits. Keep up the excellent work!

[@Scaleaton]

Thank you! Actually that's Japanese Aircraft Fans :D Japanese modelers are very kind people and one of my favorite modeling society.

[@jerryvolpini7987]

Yes, Japanese Aircraft Fans 😉

[@richjameswade]

Stunning build as always mate

[@fenbeiduo]

How old is that decal? White turns to a yellowish tone

[@Scaleaton]

I guess it's older than 5 years. the first version was much yellower. It hanged on a window glass that saw the sun for a few weeks. Nevertheless, I think that it is white at the level compatible with the weathering.

[@MightyWiggus]

Is there a danger of MEK fogging the clear parts?

[@Scaleaton]

I have never experienced.

[@TheBodi91]

Nice job again! :)

[@quantumplastic]

Muito bom! Obrigado pela partilha ;)

[@nodnodnod2063]

Oh, new intro. Like it!

[@OgrabliatorKorovanov]

well... pilots make it look less realistic imho

[@Scaleaton]

Idd. This one built for a project and I have to add figures and rivets.

[@edmachado22]

Fantastic job :)

[@martinhightower9801]

Fantastic!👍🏻👍🏻👍🏻👍🏻👍🏻

[@rocksteel44]

...VERY NICE!!!!

[@flaviosoares4254]

Verdadeira obra de arte. Parabéns.

[@maxshow7949]

Nice building...

[@paulhargreaves1497]

Very nice!

[@alonsiu]

excelente!

[@fabinhominiaturas6746]

bom;

[@rapscallion3506]

"Budget" What's a Budget?

[@chelseaK11]

A saving of money.

[@brunolopes9900]

Hi, quick question, sometimes you use MLT others you use IPA, why?

[@Scaleaton]

It depends on what paint I am using lacquer based or water based. by the way lacquer thinner works on both.

[@brunolopes9900]

So if you use Gunze (Aqueous) you use IPA/Lacquer Thinner, and for Tamiya MLT? But you use IPA also with tamiya on blackbasing stage!

[@Scaleaton]

No, I use IPA for both. I have Tamiya acrylics, they are water soluble too. I only use lacquer thinner with Tamiya X-22. Because it's must for a perfect finish.

[@brunolopes9900]

ah ok. Tamiya/Gunze (Aqueous) With IPA Mr Color (Lacquer) and Mr Surfacer with MLT Tamiya X22 with MLT

[@brunolopes9900]

I've seen others using ethyl alcohol, what's your thoughts about it?

[@TheGuitarmanrh]

I wish you wouldn't speed the film up when you are modifing pieces as we can not see what you are doing. These videos are not what you would call instruction videos, as there is no instruction at all .more like "look at me ,look what I can do!!!👎