Building the Simpson Strong-Tie Workbench Kit

A workbench is a necessity in a garage or workshop. And when I discovered this workbench kit, I decided to give it a try so you can know in advance if it is worth it.
There are definitely a few things you need to know about this kit before buying one, so check it out.
Amazon Link (affiliate):
Simpson Strong-Tie Workbench Kit:
amzn.to/45AD5jE
To help support our channel, please use our affiliate page on Amazon (paid link), we list a bunch of suggested items.
Amazon Suggestions:
www.amazon.com/shop/influence...
(There is NO extra cost to you.)
Use of video content for personal projects is at your own risk.
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
#workbench #workbenchkit #workshop
Matthew 17:20-21

[@scottleppard288]

Great vid, brother. Bought this kit yesterday at Lowe's. Looking forward to assembling this weekend, just subscribed!

[@simplesimon755]

A great video. I've been using Simpson Strong-Tie parts for over a decade. I agree with everything you said in your instructions, right down to the "oops" and especially the use of clamps to help things along. In my case I bought the parts individually at Home Depot. I assembled lots of shelves and platforms for my photo studio but also to build a couple of dog houses and other things. The braces can be pretty versatile once you get the hang of it and as you showed the results are rock solid so long as you take your time to get the job done right. Again, this was a great tutorial video, as usual.

[@gregmize01]

This is awesome! I could see making the pegboard panel taller and adding a shelf above it!

[@V8SKULLS]

Great video, you could also make your own / longer bench with those kits.

[@reub360]

Is it cheaper to buy parts individually?

[@Wisskey8t9]

Fun project, nice to do during the winter.

[@richardmann2960]

Great video. I've been using those for the last 20+ years or so and have built at least 12 work benches (many at 8ft) and probaby 8 -10 shelving units. I even used them to build a table for my CNC.

[@baxterboy23]

I have two older kits I bought of Facebook Marketplace, there's no QR code but there is a website address which unfortunately is no longer available. But it does have all the screws needed, even to secure the plywood sheets, so no need to buy extra. Also as you mentioned there's no instructions so your video is most welcome 👍👍

[@HW-75]

I would of modified the top part so there is a lip on the top countertop for clamping down the work pieces.

[@RPamela]

Another great build. 👍🏾 Kreg Rip Cut and Cross Cut jigs (no table saw yet) and I still can’t seem to cut completely square. Improving with each project though. Thanks for the suggestions in your Amazon Affiliate page, will definitely pick up a few items, especially the lighting.

[@SpecificLove7]

Thank you very much. When cutting plywood with a circular saw, I found the best way to keep a straight edge is to use a 4-ft level that is clamped down on both ends. The one I have is not perfect but does much better than other stuff I've used. I hope that helps.

[@Dlutheran]

You should make a part two to this video where you show off some upgrades that you would make to this workbench. Maybe you could add a shelf above the workbench and a light underneath the shelf.

[@SpecificLove7]

I will keep that in mind thank you

[@Dlutheran]

@@SpecificLove7 👍

[@AB_thingsDFW]

Great video. I have 2 2x6x8 sitting around in my garage taking up space and would like to know if I could use them somewhere on this kit?

[@To-Lo77]

As always, great video. 👍 on the video, info, time, effort, ect .... 👎 to Simpsons for the misleading information. It may not be life changing info to most, but as you stated, if you're new to the craft, a teen without guidance, no experience with tools, ect., I can see how that would would be very disappointing & discouraging! 👏 Thank you for the build video rather than infomercials like most others YT'rs nowadays!

[@hankfoto]

It would be useful for close-up , macro and still life photography. I deal for small studio.

[@DH-ku6qg]

Thanks for the honest breakdown on this product. Good job. Have you ever made a convertible bench/ table/picnic table build? And do you ever build projects using only metal?

[@SpecificLove7]

A few years ago I built a bench that turned into a picnic table. Most of the time we just leave it as a picnic table. As for metal only, I used to work on cars as a hobby, but nothing like that lately. Wood is a lot more accessible for most people, so I try to stick with that in my videos.

[@philquinn6375]

Good video and well explained, could you add a vice ?

[@SpecificLove7]

Maybe a light duty one

[@quietspacearts]

one can add strong heavy duty wheels with breaks

[@spasticmuse4262]

9:45 Rule # (?) Always read the instructions, even if you don't follow them.

[@cabman86]

My own workbench kit is glue and screws.

[@cabman86]

Instructions are kindling for the fireplace.

[@thumbwiz]

Looks like a very good product for a beginner. However, there are so many awesome videos on your channel, and on KZbin that the money spent on the kit could be better spent on a tool.

[@johndoe6032]

It’s not a good product. The brackets look solid, but literally everything else about it is very subpar. This is far from rocket science but they still manage to screw it up in many ways.

[@johndoe6032]

Kind of BS they can’t be bothered to include instructions, correct info on the box, and a few extra screws. I would give them a dime.

[@johndoe6032]

Regarding your comment about the extra screws not costing anything, this is common flawed thinking. If you originally paid for them, they did cost you. Not saying this to be mean, just a matter of fact. I just hear that cost much in DIY videos and it’s rarely true. People should always consider off of their costs, even time.

[@MarkATrombley]

So the box lies and the instructions are wrong. Sounds like a crap product.