Building the Ultimate Station Wagon | Charger Magnum Hellcat | 1000HP Hellwagon | Pt 100

[@AlanSjolseth]

I still can't get enough of this car. I hope that next episode is right around the corner

[@Junkyard_Dave]

Shouldn't be too long

[@montay160]

This is the baddest man on you tube!!! He single handily created a car any car love would buy. The craftsmanship is flawless. Thank you brotha for taking on a job that dodge wouldn’t.

[@Junkyard_Dave]

Thanks

[@ambergarcia8352]

ILL SAY IT AGAIN......BEST BUILD ON KZbin......NEW MEXICO LOVE.......CANT WAIT FOR THE FIRST FULL SEND!!!!!

[@TheWinterSoldier22]

You’re my hero!…I enjoy just watching how meticulous you are with this thing. One thing on my bucket list is to rebuild a junkyard car. I don’t have not even 5% of the skill you have, but you give me hope. Thanks for sharing your journey with this cool build!

[@denniscoughlin7437]

Dave this is the coolest build i have seen in years. Thank you for months of great content.

[@jetrat1589]

I am so stoked to see her roll on her own power. I have not missed an episode and have watched every minute including the wire harness ones as painful as they were they all had purpose and that my friend is why you are on #100. Attention to detail does that. See ya on the next one Dave.

[@Junkyard_Dave]

Thanks for sticking around

[@justingiese6544]

Glad you got it all together and it wasn’t rushed for SEMA clout.

[@Junkyard_Dave]

Yeah the 75% finished sema builds

[@heembuck2157]

I’m emotionally invested into this car lol. I can’t wait until it’s done!

[@n155m0]

same here

[@Korruptionen]

Been watching you for years, Dave! Love this build and also can't believe it's been 100 episodes!! That drive shaft, while chonky, it's a beautiful unit.

[@Junkyard_Dave]

Thanks and it should hold up I think the revision will look better

[@trentdawg2832]

That wagon turnt out awesome MR.DAVE!!! You kilt it……id honestly rather have that than any hellcat/demon/challenger whatnot……this thing is truly one of a kind and definitely diffrent

[@Junkyard_Dave]

Thanks

[@robsdeviceunknown]

I love this build. Just love it. At first I thought how much I would love to buy that from you when it was done. But now, I don't think so. It's SO CUSTOM that repairing it or getting parts for it will be beyond my skillset. I can only envision a nightmare trying to repair anything. But I still love it.

[@anthony2816]

Yeah, I changed my mind about buying it for the same reason.

[@rayers1000]

On the other hand there's 100 episodes, soon more, of documentation essentially which is a lot more than you typically get when buying something second hand. If any of the cars I bought used over the years had anywhere near this level of documentation, or even a fraction, I would be ecstatic and it would've made life much easier. That said, skill sets required on this build are..... Wow.

[@brentcornish6107]

Glad to see you're back working on the Hellcat Wagon. Can't wait to see it down and running since the starting of you making it. I loved watching you do the roof skin and AWD swap. Keep it up.

[@Junkyard_Dave]

Thanks and I have had a few episodes my guess is that they weren't recommended to my subscribers

[@brentcornish6107]

@@Junkyard_Dave I haven't seen you working on it in a while but glad to see you're back at it. Keep up the great content.

[@robertbalsley3232]

100 episodes and what a build looks great

[@Junkyard_Dave]

Thanks

[@ryansbigideas]

We've had one hell of a warm entry to winter here.. Glad to see you're making headway. It takes everything I have to work on my junk.. We'll have to meet up sometime.

[@JOHNABLANK]

Nice to see you back on the wagon Dave! A lot was done today. Looking forward to the startup next video.

[@DanzigDemento]

I’ve been following since the beginning! 🙏🏻 Hope it runs as good as she looks!!

[@ballzy008]

Also waiting for the interior install. Ever since the Dash scans were done i've been curious to see how they turn out!

[@Junkyard_Dave]

It will be last

[@jeroldmcgee308]

Can't wait to hear it , one of the best channels on youtube

[@Junkyard_Dave]

Me too and thanks

[@twoguysandatruck4811]

I'm on the edge of my seat still! I dig how thorough this is going

[@DavidQuayle-og8vj]

I don't know man all that work on the sub frame to not use it, Great to see the wagon so close to driving finally. Great job real happy for you.

[@Junkyard_Dave]

Sometimes you have to step back and redesign something that could cause issues down the road

[@davidbell4626]

WOW look who decided to show up! LET'S GO...............

[@shawnedwards2227]

Respect to you dave take your time nobody not doing this. building a car from ground up ppl talking about the time but the question is can you do it

[@Tarimearkansas]

What a masterpiece! Best hellcat magnum I’ve seen. I keep seeing that Deon guy saying your build will never work properly on the fb magnum groups, he wishes he could do a build like this lololol

[@HdzpViz]

Let’s go can’t wait for this project to be finished & driving but enjoying these videos

[@Junkyard_Dave]

Thanks

[@BrucePierson]

It's good that you are on episode 100, it means that you've got a lot done towards completing your project. My project is still on episode zero, which means that I haven't started it yet. Too many other things to do before I can get to it.

[@Junkyard_Dave]

Yeah they take a lot of time and money that's for sure

[@JWink118]

Glad to see that you're working on this project again. Good call on the red calipers.

[@Junkyard_Dave]

I have had quite a few episodes my guess is people weren't recommended them

[@trekenner1924]

I hope the episode is not in 4 months

[@nathanthomson777]

Defo will be

[@heyyouthere39]

Lmaooo facts

[@IISTAGII]

Yall don't understand how hard it is to source parts right now, and on top of that, get all the mismatched parts to work together. He's doing it all by himself, so if you guys think you can do it faster you should start your own channel. Clowns.

[@trekenner1924]

@@IISTAGII yu made a long ass paragraph for something that we all know 🤣💀 already it was a joke relax brother man

[@tonyanderson6493]

​@@IISTAGIIfr bunch of crying ass little girls

[@ttggcc]

This dude is a mechanical and electrical engineer…..such a genius 😭🔥

[@John-vs1nq]

Great to see you back on the wagon Dave! Thanks for sharing all the amazing work that you do with us!

[@Junkyard_Dave]

Thanks for watching and I have had quite a few episodes I don't think were shown to my subscribers

[@edwardsheets926]

Hey man love what you been doing all over the years I've been following you most of the build for the station wagon I have to say I always wanted one now I have to say I would love one you're doing great keep it up

[@Junkyard_Dave]

thanks for watching

[@FnaAuto]

This has gotta be one of the best builds I’be come across on KZbin 👍 keep up the hard work man!

[@Junkyard_Dave]

Thanks

[@resdawgs]

Go check out the 1 of 1 awd chrysler 300 trackhawk build @khal_srt

[@k.k.hickey279]

Definitely one of the longest builds. Ridler cars have been built from scratch since the roof was finished. 😂

[@FnaAuto]

@@k.k.hickey279 they also have a team of full time employees who spend 40+ hours a day dedicated to one car.. most of those show cars you see have cookie cutter parts that bolt on anyways that’s not very impressive beside their bodywork. You must not have built a car from the ground up it takes some time especially when you’re building something that hasn’t been done before

[@Batakai]

I can't wait to see you doing car shows in it. Truly one of the most beautiful builds live right now.

[@johncampbell6263]

Fantastic work as always been following this project from the start.

[@DavyOordijk]

This thing is such a masterpiece, cant wait for the next episode!

[@Snarfelle]

i ahve been watching you on tt for nearly 2 years , never knew you had a long form of content... yay

[@patrickmoodabe9728]

Part 100!! 🥳🥳🥳🥳🥳 I’ll still be here if you need part 200! 👏👏👏🤘🤘

[@Junkyard_Dave]

That's good to hear Im glad you enjoy the videos still

[@SplizziePIC]

I recommend your videos to everybody I see do a little front end swap and claim hellcat magnum. I crown you the king of it.

[@punkinsgarageandpaint8299]

I can't wait to hear it start up but...I'm really looking forward to seeing you drive it around.

[@Junkyard_Dave]

I cant wait to drive it

[@jeffreychapman6287]

This so awesome, can’t wait to see and hear this cat running. You have done an incredible and amazing job.

[@mhayes1979]

I've been following this build since you started...... I'm getting anxious, can't wait to see it running and driving. Hope it's really soon.

[@darksidemajor6780]

Finally!!!YES we get to the good content!!!

[@shiftkings1028]

super sick, this has been one of my favorite build series, keep up the good work

[@Junkyard_Dave]

Thanks

[@geoffdowney9295]

Thanks for taking us on this ride. Super excited to hear the first start-up. Got to say the driveshafts and control arms are SWEET! Keep the content rolling on the Mopars. 💪

[@Junkyard_Dave]

Thanks for watching

[@johnnycarr9935]

Dave thank you for letting take the journey with you. I have a 1 owner 07 Magnum.

[@Junkyard_Dave]

Thanks for sticking around

[@americanpatriot2.06]

Dave is quite the fabricator and designer, but it's good to see he is willing to try other fabricators and designer's products. That driveshaft is a game changer! SEMA 2024 is looking good, but we know how detail-oriented Dave is and how the world works, so I'm going to say SEMA 2025 will be the moment the Rampage is 100% completed to Dave's plan and will shine for the world to see! We are along for the ride to the very end!

[@JaysRandomnessChannel]

It's dope! I have mad love for wagons and hatchbacks so this is right up my alley!👍🏿

[@ritchieaponte417]

I'm dieing to find out how awesome that one of a kind does looking really really good

[@MidwestMotor]

So exciting to follow this build! Great work! 🏁🏁🏁🏁

[@Junkyard_Dave]

Thanks

[@GHXST3D_R3J3CT]

Puts everything together so gently 😂

[@stephen135th]

Rocking with you. Been following since day one

[@charlesxavier9978]

happy 100th! Doing a custom job there is always something that doesnt go 100% as plan

[@Junkyard_Dave]

That is the joy of building anything you never know if it will work unless you try it lol

[@keithmason9342]

Great work Dave! It's really taking shape. Too bad about the rear subframe, but I'm sure that you can work things out. At least you can use it in your Durango. Can't wait to hear the first start up. Thanks and we'll see you next time.

[@Junkyard_Dave]

thanks

[@BEVO_vs_The_World]

Looking good Dave… The finish line is getting closer, keep pushing forward.

[@neilbrown612]

hell yeah Dave! Can't wait for this beast to run and drive

[@Junkyard_Dave]

Me too

[@5hyr15]

hell yeah Dave! Been looking at your instagram for new updates and bam! Was a bit sad that you decided to ditch the custom rear subframe but all good. Can't wait to hear the car roar! Keep it up!

[@Fall2Caine]

Im sure it will be back eventually, knowing how dave is he will find a reason to be not happy with that rear and tweak the design of the custom subframe in order to work

[@danstewart8218]

Hey Dave, We were all wondering why you had stepped away for a while...now we know...After custom building a rear subframe that incorporated the durango e diff and all the other bits and then finding out it wasn't going to work after ceracoating everything etc etc etc.... Is such a gut punch...Wow...You needed to clear your head...Don't think of it as 'giving up' (I don't think you do anyways!) tho if any one in the comments plays the bottom lip, Just ignore them. The scope of this build is absolutely beyond, and it not having a custom tubular rear subframe as well as front and and and...Yes. Just get her running, enjoy it...and I'm sure you'll be ticking away all the time this thing is Incredible already and will keep evolving. Yay on seeing the finish line!!

[@Junkyard_Dave]

Thanks and I didn't step away I just think that people weren't getting my videos notifications.

[@whatsoutthere6822]

It's been a long time coming. I think it will still make SEMA next year and not be outdated.

[@Melodic_Maverick]

Cool build. Can't relate at all. Gg doggie, you'll go far

[@MattBara]

Wow love the videos bro keep up the great work

[@Junkyard_Dave]

Thanks

[@joelschuder6545]

The fruits of your labor.

[@Junkyard_Dave]

Hopefully lol

[@_Haris1904]

Can't wait for this beast to run and drive .

[@nichodgeman940]

Hell yea, I'm excited to see the next video. The magnum is si close to being on the road. I bet if ya brought that yo Sema you will have lots of attention.

[@Junkyard_Dave]

I guess we will find out next year

[@phatheraugust9795]

thank God waiting for a min for her

[@cannednolan8194]

Smart plan to keep it as close to stock to test it out. Then you can decide what you would like to change. After working out any bugs.

[@its.venchy43]

It’s no way I got my 300 RedEye finished b4 u bro. U started on this build b4 I even thought of even doing my swap (thts a problem)

[@dezolgaming]

damn that’s nice af! looks like a small darango and dodge should probably get you in on the next project!

[@johncourtneyscott2757]

Great job Dave

[@Junkyard_Dave]

Thanks

[@dodgeguyz]

On that rear knuckle/control arm sliding sleeve. Mopar has a kit that you tap the sleeve and use a puller to remove it. The kit comes with new sleeves to replace it with. They are a one time use sleeve. Although I personally have reused them, that’s how they were designed.

[@Junkyard_Dave]

Yeah its just not needed I have never seen a sleeve like that in an aluminum knuckle the only thing it it for is slop

[@dodgeguyz]

@@Junkyard_Dave Yep. I think it’s for tolerance differences. However everything is machined you would think it would all be the same.

[@Junkyard_Dave]

@dodgeguyz yeah nissan n3ver had anything like that in their aluminum knuckles plus it makes the lower arm sit on a super small face on one side

[@josephcentola8991]

Much love and support from Boston 🙏🏻 ❤

[@1Choom]

Yes 90% there!

[@reggeckmann3993]

only 3 years 🤑 lol glad it may get done!!!

[@maxst2]

Use that space for the front driveshaft for loops to contain the shaft if it breaks.

[@bigsquatchsasfoot1964]

Stella work Dave I don’t profess to knowing what your on about half the time but I love the engineering and building stuff ! That tube frame suspension you designed was amazing 👌it’s looking cool dude sometimes stuff takes time it’ll be done when it’s finished 😜👍

[@joeythekid5042]

Right now I’m working on my 5th gen Camaro and doing an AWD conversion to it

[@larryhall6416]

I can't wait for you to be daily this one love your vision on what you wanted it to be. I hope you get. Dodge engineering will look at this and love what they see. There's many of us are on the edge of our seats can't wait for it to be done. One thing I have to ask. Will you please stop second guessing yourself. Great channel. God bless

[@Junkyard_Dave]

Thanks

[@nissanv6TT]

I completely forgot you made your own rear subframe for this thing. top notch stuff.

[@Whenindoubtthottleout]

Very awesome build

[@NaviBhatia]

Good stuff man just the amount of work you put in this car just amazing

[@Junkyard_Dave]

Thanks

[@alopez2006]

dang someone got access to the new lower rear bucket 🔥

[@darksidemajor6780]

Dave I hope you took pictures to put on display when you take this thing to sema next year so allllllllll your hard detail work doesn't get overlooked

[@Junkyard_Dave]

I think I have some

[@darksidemajor6780]

@@Junkyard_Dave good!!! Well I will be there..

[@ingresswizard9044]

Heck yeah Dave. Cant wait for next video

[@LuckyQuadrifoglio]

ALL HAIL, KING “THE SPEEDWGN”

[@CC-by6rz]

Cant wait to see this thing tear it up 💨

[@think1stproductions]

Hell yeah brother..SUPA DAVE DOING THE DO... can't wait to see it moving on all 4s doing the AWD BURN OUTS.. JUST SAYING LOL. DA SHAGGIN WAGON 😈😈😈🚙☁️🎬 .🤔🚫🧢💯💪🏼🥶🚙☁️😈⚜️🙏📸🎬

[@Junkyard_Dave]

Well see about the 4x4 burnouts

[@gattsudon]

fuck yea man, amazing progress its so wild to have watched this build from the start. I'm excited to see u fire it up.

[@bobbycraig7940]

Can't Wait!

[@ballzy008]

Been Waiting for this!!!

[@n155m0]

I hope the hire ups from dodge is watching and taking notes, I would love to see a new version of the Hellcat Magnum 🙂😁

[@Junkyard_Dave]

They are defiantly not watching they are building evs lol

[@the_cammed_beast6027]

Man once this beauty is finished i hope to see it one day! cause its absolutely stunning and i dont know why dodge never did this there selves! if they would i would buy one right away cause it just looks absolutely sick! Ill trade you my 23 last call rt Charger 🤣🤣🤣

[@IntegraDIY]

18:27 i don’t see how those splines can hold up to 1000hp with slicks on a track.. FWD CV shafts are similar designs, but weight distribution and torque is different.. torque and weight is much more aggressive on those dodges.. but would be cool to see how they hold up

[@texaswildcat2000]

Front driveshaft will most likely get a longer shaft so you have more spline contact, looks like only half or less inserted... I've been looking at that brand, and others, of suspension components for greater adjustability, looking good there....

[@robertpinedajr4846]

Great project

[@LifeWithOG1]

I remember when you started the build

[@TrustNRuss]

So close good job Dave

[@Junkyard_Dave]

Thanks

[@scarface-39]

She’s coming together nicely I like the way everything is turning out! Just wondering what keeps the front driveshaft from sliding back-and-forth on the splines on each end of the yokes?

[@Junkyard_Dave]

For now those black stops I guess that's what a lot of 3000hp tractor pull trucks use they just double them up but I think it will change some after I get the revision

[@3pedaljay231]

The Hellcat Diff, is typically used in Manuals.... It helps bring the torque multiplier closer in line with the A8 Auto trans combination

[@bantheundead4162]

Dodge needs to take notes this charnum😅 is really cool ❤

[@simscoordinator]

Great work! That's going to be a beast 💪😎 God bless

[@Junkyard_Dave]

Thanks

[@frankrichards1709]

Can’t wait to see it drive 💯 percent ❤

[@Junkyard_Dave]

Thanks

[@tannerelliott6570]

Super smart to run it baseline I don't know what the cumputer will do with the drivetrain as is..

[@johnwootton9031]

It’s taking a long time but man it’s going to be a bad ass !!