Building The World's First MANUAL Dodge Demon! | PT 8

[@gd1996]

My only complaint is you guys need to upload more(I don't mean this as a negative, lbut like the channel so much I wish there was more)... definitely the best rebuild/salvage channel on youtube. It's all about the cars, not other bs I don't want to see.

[@swilleh_]

m539 restorations

[@whatyourname7748]

Yeah but half the time he’s waiting on parts

[@kolbykelley3445]

@gd1996 this is a good channel not the best goon squad is the original of this typa of content

[@BillyDaGoat1017]

Better quality than goonz squad though lmao

[@G8Xt]

This shit cost money and money takes time lmao I think it builds excitement for the next video

[@1980FordPinto]

This is going to be one of the coolest Dodge demons ever

[@mabny205]

No the COOLEST dodge demon EVER!

[@1970Dodgechallenger]

This will be great

[@shamanirichirdson8669]

​@@mabny205😊

[@MohamedMohamed-br1xv]

demon 170 lol

[@URDREAMZZZ]

I love where this has gone it’s a masterpiece

[@michaelmcclaine2431]

I have to say honestly, I admire you Scrap Life Lee for all that you do and the fact that you do it regardless just because you can. That alone is an inspiration to others to keep on moving and dreaming and thanks for all that you do!

[@ethandfortune]

1127 hp after a few runs on the dyno. Good luck with the wiring looking forward to hearing it and seeing it move. 🤘🏻👨‍🔧

[@derekp7230]

As bummed as I am we didn’t get to see it start this video was so satisfying to see it come this far . Thank you for great content can’t wait to see this baby purrr

[@shoptourhardcoredragracing1840]

Find the 5 volt in reference wire to the trans connector and jump it to the output wire to complete the circuit , find the clutch signal terminal to the pcm and give it what it needs, most likely a ground , so it thinks the clutch peddle is pressed down when starting . You need a scan tool to read data and if you trick the car by giving it what it needs it might start. This works for GM's.

[@kevinhahn2111]

1126 horsepower and 1060 torque. Loving this series as a mopar man myself! I have a 2019 charger rt and I have tons of ideas so this series has given me valuable insights into what I could run into. Thank you!

[@michaelrodriguez9325]

Couple of months ago in Phoenix AZ, I was at LKQ (32nd st and Southern ave, when you Google it), sat a rare, low mileage, manual hemi hellcat motor and transmission. I believe it had about 40k mileage. Looked clean. I believe the price was about $18k. It might still be sitting there. Thank me later if it still is.

[@armandovega4597]

This is freaking amazing, the Demon has come a long way. I can’t wait to watch it roar. But like everything amazing, there’s always that one bump or two or many that need to be overcome. I’m hoping to see it go through at least 1,200 whp!

[@TheBoyYourBoy]

I’m so invested into this project I need to see it to the very end ! You guys got this ! Revive the beast !

[@mattsmith3008]

You can have the sales codes changed to manual at a local dealer. Will just require the module reconfiguration routine by the dealer ship after the sales codes are altered. If you were close I’d offer to do it for you lol. Good luck!

[@ToasterCoasterAdventures]

Would he also have to loop the canbus from the auto module as they are a series connection?

[@BigDavoNorriwong]

@@ToasterCoasterAdventures If he fibre optic, yes

[@styleoverspeed]

with a clutch ?

[@Dracula00pium]

I can’t get enough of this series!! If you want to watch a similar series Tavarish is restoring a flooded McClaren P1

[@swilleh_]

the only difference is that Tavarish actually started working on the car while he was waiting on other parts and made it look good from outside BEFORE putting engine and stuff

[@Thy-corholio-of-beavis]

894 horsepower and 836 torque. Been loving the series and I'm hoping to see it run next episode

[@thetrentwins]

Best car channel on the tube fr

[@VinnyBecker-hc5yz]

What you guys have done is so cool and I'm happy to see your journey is coming to a end.

[@S2NAZ]

So fun! Can’t wait to see it running. Good luck on the ECM! 👍🏻

[@chribbitsch]

Don't know a darn thing about cars, but I still subscribed a while back to follow this build. You guys knowledge and experience is just insane!

[@RedHotBlueGlue]

I am so fired up about this build! I've been a Chevy guy all my life, but this has got me unbolted (For now). I would say you'll hit the 1000hp mark, so I'm guessing 1007.77hp. Good luck to you and all involved.

[@ShiftyKale]

I can’t wait for this project to be finished. Seeing where this came from to now is absolutely insane. My horse power guess is ≈1045. Love the videos and can’t wait to see this rip on the dyno

[@tygutierrez5275]

This has been an awesome series to keep up with. I want to guess when it is all said and done, that it will push roughly 1150 hp! Can't wait to see it fire up and get on the dyno

[@InitialEngineers]

THIS BUILD IS SOOO SWEET AND THESE VIDEOS ARE TOO DAMN GOOD!

[@datoneguy7945]

Love the videos. My estimate is the engine will put out 937HP. Good luck to everyone and let’s see who gets lucky to get that ROD 😝

[@ericbritton8146]

I agree. I is going to be absolutely awesome. A 1000 hp Dodge Demon with the 6-sp manual. Wow!

[@filipherrlin]

Absolutely love the series! I think that it will make 974hp on the dyno :)

[@jimmiepridemore9475]

I think you and I are the closest good luck on the rod rebound lol

[@thatsrtkid]

Hey guys, if that's a TR 6060 trans, id highly recommend getting a skip shift eliminator (if it's from a stock challenger) makes that 1-2-3 shift very slow for emissions and crap, the eliminator is like 20 bucks and will be worth it. You probably already know this, just thought I'd chime in! Cheers!

[@kyrujames]

Tunes usually delete skip shift these days.

[@thatsrtkid]

@@kyrujames if it's a trans tune then yeah probably. It's cheaper than a trans "tune" which just takes the baby monitors off the trans. It's a bit cheaper and accomplishes the same thing. But yeah you could be right! I just didnt ask my tuner to when he did my car on HP

[@Ross19kilo]

I’m gonna go with an even 1050 hp and 1000 torque. Hoping you get it all sorted out!

[@Andrew-s6j4k]

This has been a hell of a journey, keep up the momentum!

[@MisterLowrider]

I really dig the builds on this channel!! And I like the fact that you show it all step by step!!

[@Moh_1997]

I am from Saudi Arabia and have been following the Red Eye series since the beginning and I am eager to see the end of the series. Good luck

[@sergioguap]

This the only series on yt that i actually get excited for when i see a new video 😁

[@romanhughes1237]

You should also twin turbo it so it is a super charged twin turbo engine

[@GloomToon]

That’s a fast way for it to blow up

[@h-mangaming9766]

thats not physically possible bro 😭💀

[@angelcelis9090]

​@@h-mangaming9766it is

[@starboy3466]

@@h-mangaming9766 It’s called twin-charging, it’s very much possible, the Lancia Delta S4 is a good example.

[@gogreen392]

Go play forza

[@Brian-ec1jy]

Im Absolutely in love with this build series and the DEMON.. Can't wait for paint 😊😊😊

[@georko88]

Been loving the series and I'm hoping to see it run next episode. I’d bet it’ll have 1050 hp!!

[@mikew6135]

When you put the rear differential In you should also do the lock out kit and a diff brace. Also the stock sway bar end links are too weak. Use UPR heim jointed in the front and speedlogix heim jointed in the rear. Noticeable difference

[@fa5.brandon]

Honda bond is DEFINITELY the GOAT of RTVs.

[@expose.392]

my fav series of the channel mopar babyyyyyyy🔥🔥🔥🔥🔥

[@gigachu7692]

I think it’ll make 970 hp. I’m a new subscriber and only just starting following the build but I’m so excited to see it finally running, keep at it man I believe in you

[@Gfontenot]

One of the most detailed and informative videos I’ve seen! Love it

[@MiturBinEsderty]

As a kid I was obsessed with scrap yards metal cars aircraft. It’d very satisfying taking something from a crashed or burned car and using it for another car to function. I prefer low milage factory parts over new aftermarket or rebuilt any day. I collect parts for a car I drive. Because within 5 years my cars from new have 100k miles. Most cars things start going 110-150.

[@bevanfoster6422]

Luv that energy Brother I'm staying tuned, your making this interesting as hell. Big up

[@rpturbo]

I love the rebuild! Ive always enjoyed having or rebuilding something that looks like it's been through hell and back, and is just faster than its return trip! Ive rebuilt a gew cars in my day, but never anything nearly this cool, and im not even a Dodge guy. I hope you get it running soon, they are very overly complicated.

[@ShawnMoore-q5g]

873 HP 918 TQ. Great vids and amazing work cant wait to hear her go "wooooop" as yall said in last few vids lol

[@austineller2017]

To fix your no start issue you will want to rewire the start stop switch and run a wire from pcm to the switch then down to the starter. That will disable the bcm from shutting you down. You should also be able to reprogram bcm to shut off warning lights.

[@MAG-nify]

1062 hp and 998 torque. Love this series!

[@robertcollins4534]

Can't wait to see it run. And I think it will Dyno at around 956hp. Waiting patiently to see this run. Great work guys...

[@juliansaldana5647]

looks soo amn goo cant wait for it to finish thanks for the vis bro keep it up

[@turboyster]

Insane work, underrated channel, thumbs up no brainer

[@laserdad]

I love watching upgrade videos that run into real life problems, like I always encounter. That's how we can learn, without making the mistakes ourselves. What most viewers don't realize is how much time is wasted trying to video and edit the process. I find that some of my mistakes are caused by video distractions.

[@thomaseicher2594]

Dude you will not regret the Barton shifter one bit. Absolutely game changing

[@muhammadfurqan7415]

This came a long way man the best car related KZbin channel ever 🎉🎉❤❤

[@JourneyIsanExploiter]

Honestly. My friend just introduced me to this since he’s been following religiously and I think this is awesome. Personally I think it’ll make 1,043 Horsepower and probably around 954 lb-ft of torque

[@race-ist5point0]

That clutch package is dope

[@eastrosecollection7544]

You gained a new supporter with this series🔥🔥🔥

[@TheRyanweyh]

1026hp can’t wait to see it running !!

[@gregmcguyer9270]

Its been fun on this end watching. Cant wait to see it finished. predict horsepower at 1025

[@ratmfan4442]

Keep em coming son!! I’ve been anxiously waiting for episode 8😎🙃🙂

[@jacobjohnston3829]

Those transmission discs are so aesthetically pleasing :O

[@Kraxt0n]

a small but EXTREMLY useful tip, that carrier bearing install. well, 90% of all installs call for you to push them towards the transmission when tightening down to "preload" them. otherwise you get noise, shakes, etc. make sure both are at the same spots however. In the video, it looks like you just sent it in. not knockin your work or "being that dude" just dont wanna see you have to redo this again within 6 months of premature failure.

[@emmanuelnagel4978]

BEST KZbin CHANNEL EVER. IVE SHARED YOUR CHANNEL TO EVERYBODY I KNOW AND CANT WAIT FOR THE MANUEL DEMON TO RISE FROM THE ASHES LIKE A TRUE PHOENIX

[@haljordan2197]

I could definitely be friends with this guy, we have the exact same sense of humor.

[@jayb4398]

Those rods are nice. 1126 hp on those new rods!❤

[@antonyapudo8954]

Awesome content. Lovely execution.

[@Forbidden-Sloth]

1111 hp 1080 torque Keep it going dude I love the series!

[@LeakyCoolant]

986 HP/ 890 TQ Good luck with it i’m sure you’ll find a way💯

[@PuddingPeep-fs1kw]

Really enjoying this build, Especially the way you have left the exterior of the car. Here in the u.k we never really see these cars - I wish we did !

[@caponecruz6259]

Nice rebuild! Gotta love that demon motor! Better have a good security on your car because thieves will steal it! My brother had his stolen, repainted & crashed! He has anther one, but he added security to it!

[@dannythompson1948]

Any other youtuber would have made this into 10 videos released over a 6 month period. You guys are G's.. thank you

[@c.lightning6815]

FIPG absolutely is the best.

[@connordooley]

I’m excited to see this history being made

[@johnkelly1386]

Brrrrrrruuuuuhhhhhh I need to see the final product. I really want to see when the paint job is happening and the first start

[@jakelopz3400]

1125 hrsp 1045 torque love the series fw what ur doing man!

[@mikew6135]

108mm TB has a small oring to seal. Really should use the 108mm on the ported Kong. Greg does great work!

[@yavuzsarikaya1696]

794hp , it always seems impossible until it's done. Can't wait for the next video

[@mramosmix]

This channel should have a million followers

[@dennisbixby5505]

I can appreciate what you were doing and I can't wait to see the outcome I'm saying 920 HP. I just wondered why you didn't paint the before putting engine in

[@jamiel3504]

Literally the “demon from hell “ lol, I love the hoshposh of parts, it makes it that much more unique. The ROD- MUNCH DEMON 925HP

[@aXentOG]

906 HP 855 TQ Good luck getting this bih up and running- can't believe this project has been going for a year already!

[@bladesofglorylawnmaintenan6354]

My guess is 438hp !! You got this brother!! Stay blessed

[@hobbeekid]

One thing you guys are overlooking is the fact that the pcm that came with it has to see all the components that came were with the car from the factory to even have a remote chance of starting. That includes the air conditioning that you eliminated, the U connect, and all the applicable computers,wiring and even lighting systems that the car was assembled with. That’s a whole can of worms in itself. Gas monkey had those same issues with their shardcat dart a few years back,as well as roadkill with their General mayhem swap…

[@jamesj5469]

22:06 best part of the video. 1100

[@ElDemon_Ll]

Finally 🎉🎉 I start following you the day you got the demon 😈

[@Tyytyythatguy]

For the ecu, there’s currently two challenger hellcats newer than 2018 with a manual. If you bid on those you should get the ecu.

[@max8231997]

1000 hp it’ll be sick to see it run

[@Alllaneracerss]

Before tune 650whp After tune and revisions and all that’s calibrated for the bigger injectors and ported blower, 915whp

[@Cth3boss]

There's 2 manual dodge hell cats on Copart now. Really excited to see you finish this project

[@glennsessajr2470]

This is a amazing awesome build I just did a 2.2 to a 4.3 swap on my 2001 chevy s10 extreme and it is a nightmare on the wiring it is amazing , though on how much you accomplished on that car amd I'm thinking atheist 800 to 1100 hp

[@effigy42]

Black with orange trim is great

[@d_dawg05]

Why would you delete the a/c? Not a good performance mod as it only increases performance by 10-40hp

[@Jae_in_the_88]

Grab a Body control module from a manual car vin match to the pcm and your should have the car happier also could turn the car to the ACC MODE and jump the starter ive done this on a dodge journey that wouldnt start after a accident 2014

[@7seriesmax]

I wonder if you could bypass the fuel pump controls at the body module with a toggle switch and put a start button on it. Will it fire up? It works for Chevy’s anti-theft no start because of the body module/chip key issue.

[@johnblanton650]

Put a 392 Hemi and let it scream and put 25s rims and and put skirts on the truck

[@realmaindrianpace]

Man, that's gonna be a thrill ride in more ways than one. My Fox Mustang makes right at 600 wheel and has a Tremec TKO five speed with 3.27 gears, and even with 295 tires it goes sideways in third stupid easy. Fun, but annoying after a while, I'd like to be able to feel what full acceleration feels like with actual traction. I would imagine that several hundred more HP in that beastie won't make things any easier. BUT, there's only one way to find out.

[@tommel1969]

1085 HP SICK looking car!!

[@jsmall5297]

Amazing. Keep them coming.

[@sad_skittlezzz06]

i’m guessing if you get it on the dyno it’ll make around 946hp but more after tuning and stuff probably close to 1000hp, love this build man keep it up 💯

[@userplayer5605]

CANT WAIT TO SEE THIS DEMONYO RUN

[@naichestube]

I love long videos and it don’t matter how long it is.

[@race-ist5point0]

I wasn't going to say anything but I just wanted to know why you chose to delete the A/C compressor?

[@6speedcat]

Hay have you tried using Alpha OBD to change the BCM settings? I have used it on both my Durango and Challenger Hellcat Widebody to fix the speedometer when I put 315mm tires

[@rockyrodriguezcelis8908]

I think it’ll make 1160 horsepower btw I love this series man. Every other day I start thinking about it, waiting for the next part to come out. I hope all goes well with the rest of the build. Hoping I get that rod🤞.