NZXT H210 Mini iTX PC Build 2021 (ASMR Style PC Build)

[@markjosephescamillas4903]

Wow! I've been stressing out with my build for the past couple of days and this video hits it spot on! Thanks so much for your video! You solved all of my doubts and concerns. :) Just new into building by the way. :) I will subscribe now, please keep the videos coming! :)

[@chaztaylor76]

Where is the dust filter on the front ? I noticed you putt the front fans on the outside of the bracket but mine I put them before the bracket and put the dust filter back on? Reason…?

[@44Bigs]

Came here hoping for a tubes down installation and I was not disappointed. Glad to see it's possible!

[@HipocratesR]

How's the air going into that GPU ?? I love the case form factor and overall look but makes me concern if poor air flow.

[@JavierPadron]

Got my pc built, and love this set up so much. Gonna move my fans to front like you installed to get more room for graphics card and just run single fans and test temps.

[@bernardlegaspi1336]

i think there is something wrong about the AIO orientation :D

[@garnt02]

Poor flow to the pump

[@tmcbride9435]

I think that is fine. It’s long as the top of the tank is above the pump

[@nitehawk4067]

And doesn't installed front part, and cannot install dust filter with this type of installation.

[@wb_r9379]

congratulations for the video. I'm putting together a similar project. I saved your videos in favorites. i have a doubt. why did you use fans on both sides of the radiator? What is the direction of airflow from these radiator fans?

[@mikr0bi]

How did you remove the tempered glass? Mine is stucked

[@u2msnake]

bros gpu is gonna be on fire

[@song-uk9wo]

hi, love your build and i have some question. would it be possible to close front panel if fans are installed in front of the braket like your build?

[@DenisWojnar]

You can close it but you have only 1-2mm space between the front push fans and the case front. You doesn't have enough Air push for the radiator. For an optimal flow the case need to be open. I don't prefer the push pull config for a this case.

[@Matt-gz9nr]

What power supply is is that wonder if the a a usb port

[@DugiDevetCarabolium]

What about front panel and filter? Is this dust collector?

[@BuildsWithV]

Front panel didn’t fit so I had to modify it which I did in another video

[@cheesian123]

Hi bro …i just build a set with same motherboard…i encounter the board RGB fusion 2.0 cAnt sync my corsair vengeance RGB…do you facing this problem?

[@cbjewelz]

Beautiful build. About to start my h210. Interesting that you did push pull on the radiator. Apparently the case was designed for negative pressure so wonder if that setup disrupts that. But I’m sure the thermals are fine

[@BuildsWithV]

Thanks so much, yeah the thermals are great but the front panel doesn’t fit on the case yet so I haven’t been able to test temps with panel on. I will be modifying the case in my next video or so to make it better and to fit the panel.

[@ough8091]

Have you had any problems with this case yet? I want to build my first PC which will go to my 8 year old brother and I like this little case a lot. Lol

[@AndrewF321]

Hey this is kind of late but maybe you'll reply, Can this case support new rtx 3070 or 3080? i'm planning on getting one eventually but looks like theres only 2 slots and the gpu needs 3. I want to get a waterblock for it and i'm wondering if that will make it slimmer or if it still needs 3 slots for the bracket. Thanks and great video, keep it up.

[@BuildsWithV]

Making the GPU water cooled it should fit no issues. When they says it’s a 3 slot card 99% of time time that means the card is 3 slot thick but the card still only has 2 slots. Just make sure the card isn’t super long because this case isn’t very long

[@cheesian123]

Awesome Build bro ! but the lian li fan does you need extra controller to control the RGB? as i know the H210 didn't have any controller

[@BuildsWithV]

Thank you 🙏 Yeah I had to use the unihub to control the rgbs

[@cheesian123]

@@BuildsWithV are the unihub put on behind casing?

[@BuildsWithV]

@@cheesian123 yeah it’s behind the motherboard

[@cheesian123]

@@BuildsWithV thanks you :)

[@algokiddo]

Cool build! Do you have any references for the modding you're planning? Looking forward to it!

[@BuildsWithV]

I will be nodding the front of the case just a bit. Nothing crazy but it’ll make it look better and be more functional

[@BuildsWithV]

Thank you 🙏

[@algokiddo]

@@BuildsWithV that’s a nice idea. I’ve been thinking about adding another fan hole on the bottom, so there’s more air intake to the GPU, but I haven’t seen anyone that’s done that yet. Do you think it’s worth a shot?

[@BuildsWithV]

@@algokiddo I’ll definitely be taking a look at that as well. Pretty cool idea. Not sure if there’s enough space with all the cables and stuff but definitely worth a look

[@ivanwill]

Nice little build. Loving the NZXT case, too. It would be nice to see how you setup the fans in the BIOS, on the ASUS B550 motherboard. Even more so, if you have case fans connected to the USB connector on the motherboard. Something tells me those fans have to be configured via a software, versus the BIOS.

[@BuildsWithV]

Thanks so much! I like the nzxt cases but my favorite from them is this one here. Just love the overall design and how it literally just looks like a normal case and yet shrunk down. Typically I just set the fans in bios to silent mode but on my main pc I did do a custom fan curve to avoid them ramping up and down for no real reason ( I have 12 fans in it so it can definitely make some noise 😅). The lian li uni fans and the nzxt fans for the aio both have separate softwares to control their rgbs and speed and I also just set them to their silent mode. Definitely wish rgbs and speeds and all that good stuff would be simpler. Maybe a “one app does all” kinda thing. Maybe some day (I hope 😒).

[@timelyraccoon8878]

Beautiful

[@jesrieldiaz3581]

can you fit Matx Motherboard in that case?

[@mariav.carvalho4230]

what about the gpu temp? i want to build in themis case but im afraid with this specific point

[@Gearsandco]

do you think my Cugar gx 1050w power supply fit in that case ? I have unnecessary huge pc case and I want to reuse as much component as possible it has an i7 10700k with a 1080ti so I'm not sure if all this will fit soon to get a 3080.

[@BuildsWithV]

Not sure if I’d recommend this case with a 3080 honestly. Maybe 3060. 3080 may not even fit unless it’s a smaller card. Temps will just be overall high in this case, even with a modified front panel.

[@Gearsandco]

@@BuildsWithV yeah i see but i love the case and i like to make a small but super powerful case i would probably get a 3070ti

[@tmcbride9435]

How is the GPU length affected by having the push/pul configuration if at all?

[@BuildsWithV]

With more fans and/or rads in the front of the case, there’s less space for longer GPU

[@MsKillerBee]

Hi, I also got the same case and motherboard, I would like to ask if how did managed to connect all the fans because I am also planning to do a push pull aio liquid cooler. but the fan connections on this case only allows up to 5 connections. I’m curious where’d u connect the 6th fan? if it’s a separate splitter, may I ask for the link. thanks!

[@BuildsWithV]

So the nzxt fans plug into their own hub, the lian li fans also plug into their own hub and then the other 2 fans use a separate hub. But if you do need to plug several fans in you can get a sata powered hub for your specific fans. What fans do you have?

[@MsKillerBee]

@@BuildsWithV ty for answering! I got the id cooling zf-12025 pink .. so you are saying I should get hubs for idcooling too? I am thinking of using these fans for exhaust at the back and top of the case, also for the other side of the radiator.. but can I sync them still even if they are using different hubs?

[@BuildsWithV]

@@MsKillerBee so with those fans since they use the standard 4-pin pwm and 3-pin ARGB connectors I’d recommend just getting this fan/ARGB hub: amzn.to/3MnI7ax It’ll still use your motherboard software to control the rgb effects. Plus is really easy to connect, sata power from your psu and the other two cables plug into your motherboard instead of your fan and then you plug all the fans into it and done ✅

[@MsKillerBee]

@@BuildsWithV thanks a bunch!!

[@MsKillerBee]

@@BuildsWithV follow up question, did u use the type c connection on the case? if so how did u connect it to the motherboard? if u used a hub which did u use? thanks! :D

[@Bonobo85]

Very nice work. I wanted to match those exact same case & motherboard, but then I noticed that this board doesn't have an internal USB 3.2 gen 2 connector for the front panel. How did you manage to connect the front USB-C port? Thanks!

[@BuildsWithV]

Thank you 🙏 Yeah it’s unfortunate that more motherboards done have the usb c header, I actually didn’t connect it on mine. Wish I could have but didn’t want to go with a different motherboard.

[@nickmiller9910]

I know this is an old video so you might not see this comment, but if you do, where did you get that screwdriver set that you used to open the motherboard

[@BuildsWithV]

I got it from Walmart. I believe they changed the color to red but they should still have the same kit. Hyper Tough Tech Repair Tool Kit www.walmart.com/ip/909383908

[@nickmiller9910]

@@BuildsWithV thank you

[@hectorjrr1]

Great video! finally someone thinking "out of the box"! im going with this config as well.. one thought.... would you think it will fit well an 280mm Kraken z63 push and pull fan as well..? I´m not sure if the radiator will fit with 6800 xt reference model card.. or maybe just go with 240mm.will be fine as well. (i´m running 5800x3d undervolted at 1v, it works really good) and also in nzxt h1, but it´s quite hot in there...it . what do you think?, thanks for sharing your videos! really cool :)

[@klvpts3322]

The z63 will fit but very tightly so you can go with either of the options

[@HubOfWealth]

Nice and I have a question should I use 32gb ram 2666mhz or 16gb 3200mhz

[@u2msnake]

16gb

[@Larry_The_Berry2900]

I have a pretty similar build with a msi rtx 3060 to inside but when I game my gpu temp is like 90. That seems a little high. Does anyone know why

[@TheC0smicGoose]

Barely any space for air to get in since that gap between the case and GPU is small and it might also be the card, msi cards have alot of protruding edges

[@carlosvergara8421]

how is the complete power consumption?

[@mervin3x]

How is the airflow

[@pipikakachu]

Does rtx 3090 fe fit in there ?

[@vampanthem9766]

would this build work with a 12400f and a 3060 ti?

[@BuildsWithV]

Yeah it would work with a 3060ti as long as it’s only 2 slot. You’d need a different motherboard as well for the 12400

[@MrVesical]

Hi! Very nice video and build! I am thinking about doing the same setup for myself because I have a rig with an old I7-4790 paired with an rtx 3060 12gb. One of my friend would give me the b550 aorus pro ax for 40 euros. What do you think? Should I go for it or is it better to wait with the new Gen processors? Thanks in advance!

[@BuildsWithV]

Thank you 🙏 Honestly it’s a solid deal and it really depends if you want to wait for next Gen. Also, if you don’t mind spending the extra money. Personally I think I’d wait but only cause I like having the newest and I don’t mind spending a bit more for it

[@BuildsWithV]

Thank you 🙏 Honestly it’s a solid deal and it really depends if you want to wait for next Gen. Also, if you don’t mind spending the extra money. Personally I think I’d wait but only cause I like having the newest and I don’t mind spending a bit more for it

[@MrVesical]

@@BuildsWithV I agree with you but I could sell the components and switch to ddr5 in the near future if its needed. I like to have the newest generation too but I don't use the computer a lot, a little bit of gaming and nothing incredibly demanding. What was the price of the b550i pro ax? Is it a good mobo? BTW I like this case very much, it seems an incredible form factor! Thanks for the help man!

[@MrVesical]

I have company discount on new components. So ryzen 5 5600x + mobo + 16gb Ddr4 3600mhz will it costs me 300€/$. Plus I can sell my actual platform with the I7 and I could make 100/150€/$ from it. So maybe it's a good deal. I think new platform will cost me a lot more.

[@BuildsWithV]

@@MrVesical oh okay. Yeah the motherboard is great and I personally love it. Never had an issue with it. Definitely solid deal and you’re right, can always upgrade in the future if you need to. I always need lots of performance for video production but even a Ryzen 3600 works for me most of the time. Now I have a Ryzen 9 but that’s just cause I got it on a deal 😅

[@mainly_dyutish9]

Plz show this case fan aerocool mirage 12 pro argb in your personal build plz plz plz plz

[@andysaqr1248]

Amazing video! I have a question : can I build Motherboard ASUS ROG Strix B550-E Gaming with AMD Ryzen 9 5950X 16-core and ram 64 and EVGA GeForce RTX 3060 XC Gaming?

[@Taboo1323]

You can if its a mini itx

[@TheStruggleFest]

man this aged like milk

[@kyriealarin7951]

ur cooler position bro wtf, are you a fan of the verge?

[@BuildsWithV]

Seems to me that everyone who references the verge really don’t know how to build a pc probably. It’s a simple search, thanks for watching 🙏

[@abdulkareem-bw8rs]

bro can i ask one thing that why buy a rgb nzxt aio just buy classic it is in the front no one is gonna see it

[@BuildsWithV]

At the time of purchase the RGB version was cheaper than the regular. It was on a sale. Also, since I got the rgb version I ended up nodding this case to show off the fans. Have another video for the mod

[@BuildsWithV]

kzbin.info/www/bejne/jKOupZWoq9Kqr7ssi=vndSWleEzcnBQOxq mod video

[@nickmiller9910]

Would it be overkill to get two 16 GB sticks of RAM?

[@BuildsWithV]

Just depends what you use the pc for. 32gb of ram is a good sweet spot in my opinion. 16gb is fine as well which is what I used but if you have the extra money and/or need more ram then go for 32gb. Never hurts.

[@nickmiller9910]

@@BuildsWithV cool thanks

[@umairphoenix]

Neat

[@coreybingham5479]

Flip your radiator dawg. You want the water block BELOW the inlet/outlet for the radiator. You're gonna burn up the water pump.

[@BuildsWithV]

That is false. You want the highest point of the radiator higher than the pump. The inlet/outlet can be lower or higher and long as the highest point of the rad is higher.

[@pleco47]

hocus pocus can the camera please focus

[@Tixtir.]

🌺🌺🌺🌺🌺🌺

[@BuildsWithV]

Thank you 🙏