Күн бұрын
7 ай бұрын
7 ай бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@HeShoeTooBig 10 сағат бұрын
Not sure if you respond to comments, but do you have any recommendations for non-aRGB hubs? I have 7 PWM Fans with non-addressable RGB lights
@yungquaalude336 13 сағат бұрын
It won’t fry my motherboard and its components when plugging that 3 pin into the CPU header? I’ve been very apprehensive about that part
@BuildsWithV 5 сағат бұрын
If it were rgb plug then yes you’d have a very bad day. Fan or pump plugs can be plugged a 3 pin into a 4 pin.
@Leafi275 Күн бұрын
Remember don’t just enter your pc without washing your hands etc it can cause it to break because of static electricity build up!
@diode86 2 күн бұрын
So, everything "External" like fans, are connected to argb hub/controller. Ram,gpu, water cooling for cpu, they are all connected directly to the motherboard, nothing goes into argb controller. But, since the argb controller is connected to the motherboard, will then All of the components be able to sync with the controller and change colors all together?
@jurivjerdha2467 2 күн бұрын
cleaniest video ever
@pattysylvanbutterfly433 2 күн бұрын
Super helpful…shows for showing this. Made putting mine together much easier 🙏
@BuildsWithV 2 күн бұрын
Glad I could help 🙌 thanks for watching and commenting 🙏🙏
@goodusernamejoke123 3 күн бұрын
it is a crime not to name it only fans
@neeravraja-mn2pw 4 күн бұрын
Bro please help me i have bought a used rtx 2060 but how do i know if i have 8 pin or 6 pin
@ChaosMan-gf4jg 4 күн бұрын
Count the pins, I have 8 but only have 6 pin cable sad😢
@neeravraja-mn2pw 3 күн бұрын
ooò hk thankyou soo much😙
@mrhaths 5 күн бұрын
which fans and CPU cooler did you use?
@Moonclips_ 5 күн бұрын
how do you know which fans fit in your case?
@xtatuux9306 5 күн бұрын
Where you get your pins
@CristianDominguezReloaded 6 күн бұрын
i have a problem with this cooler. every time i open a game , the air coming from the fans sounds a lot louder (like a jet turbine) and then it stops and it makes that sound again from time to time . why does that happen? . i didn't install the cooler , a friend of mine did it . Also , would the GPU have to do with that sound too?
@tripleconsonant 6 күн бұрын
don’t know anything;g and this only helped a little i don’t even know about the plugs??? did i have to buy it with my graphic card?
@SCP--jo8hb 4 күн бұрын
plugs come with your PSU
@tripleconsonant 4 күн бұрын
@@SCP--jo8hb my power supply had no extra plugs. i had to buy another one
@SCP--jo8hb 4 күн бұрын
@@tripleconsonant you must have had a prebuilt with a vendor specific PSU. It probably just had 2 motherboard plug ins? Yea had to buy another one for my first PC as well.
@tripleconsonant 4 күн бұрын
@@SCP--jo8hb yup u right on the money
@tristeaf540 8 күн бұрын
I bought these recently and don’t like them. The pins are just sticking out and makes them real prone to accident especially in a tight fit case.
@moonfire3885 10 күн бұрын
One end of the cpu cooler (where the screw is) does not line up with the other bracket on my motherboard 😢 I don’t know what to do..
@BuildsWithV 10 күн бұрын
Check to make sure you’re using the correct bracket for your motherboard and cooler. Also make sure the brackets are installed in the correct orientation. What motherboard (or cpu) do you have?
@moonfire3885 10 күн бұрын
I am so silly, I had one of the brackets upside down this entire time..that’s why there was a little bit of space on one end 😅
@KAPUTtherapy 11 күн бұрын
old ass fan hub. ive got one plug
@aidanjohnson-hill8110 11 күн бұрын
Thanks bro. First time building a pc and couldn't get my fans to go. I forgot to plug then in lol.
@BuildsWithV 11 күн бұрын
I’m glad I could help 🙌 thanks for watching ✌️
@fernandog.3261 11 күн бұрын
This is the only video that has answered my questions. I do have another question, I have Thermaltake CT120 daisy chained to my AIO and TT swafan ex 12 argb fans. Would I have to separate the daisy chain fans and connect each fan individually to the hubs or would it be okay to keep three fans together for one hub port/argb port?
@BuildsWithV 11 күн бұрын
It’s probably okay to do it that way but it’s usually a good idea to separate them if you can. Just to not overload anything. I had my old pc running like that for a year and it was fine. But it did overload once, all the fans lighting turned off. Turned out that the hub I used had protection just in case.
@fernandog.3261 11 күн бұрын
@@BuildsWithV ahhh okay, that makes sense. I’m trying to prevent things like that in the long run. I’ll be saving up for different fans. Thanks again!
@spike-- 12 күн бұрын
The Armrests are worthless when reclining. Not good for steam decking.
@BuildsWithV 11 күн бұрын
Yeah, that was one of my CONs as well. I prefer the arm rests to be closer to the elbows. Especially since you can move them forward if needed.
@flexispotus 11 күн бұрын
Thank you for your suggestion; we will make improvements accordingly. Additionally, our chairs are adjustable in height, making them suitable for a wider variety of tables than regular chairs.💓
@spike-- 11 күн бұрын
@@flexispotus I just want a chair with armrest close to my body so they are actually usable for gaming.
@BuildsWithV 12 күн бұрын
FlexiSpot is having their brand day sale once a year now-Up to 60% off! Use the exclusive code "BDC7" for extra $30 off. It's the best btime to get your favorite chair/desk now. US: bit.ly/3UO0fj5 CA: bit.ly/3UG4ygc
@camcooolback4115 12 күн бұрын
Is I already have 2x 8gb sticks and I add 2x 16GB stick with my old 8 GB sticks and have 46GB in total???
@hanneskrabbenborg1687 12 күн бұрын
My pc does not turn on annymore
@kingrises1499 13 күн бұрын
Dose it work for 5800x3d
@GuessWhoTTOK 14 күн бұрын
Oooooookay....Question. I have the MSI B550 Gaming Gen3 MB which only has 4-pin JRGB headers. My fans RGB connectors are 3 pin but on a 4-pin connector (the 4th pin area isn't hollow), so I cannot connect this to the MB. I bought a fab hub (ITJTV 9 port fan hub) which accommodates both fan and RGB connections, but the connector that goes from the hub to the MB is ALSO a 3 pin. Is there a way to make this work so I can control the RGB's from the MB?
@BuildsWithV 14 күн бұрын
You can make it work but you’ll need a 4-pin 12v to 3-pin 5v adapter. You could also just go with a razer argb controller if you’d like to but it might cost more.
@Liyah512 14 күн бұрын
@@BuildsWithVthank you so much for replying and the help!!
@crazymagnetfishingfamily2325 14 күн бұрын
What if my graphics card wire only has 4 pins and my graphics card is 6
@CrestedCleo 14 күн бұрын
Soak in refrigerated mineral oil C:
@TheBalaskas 14 күн бұрын
How did you put the USB ports to the side on the Lian Li case?
@MrRickPatel 10 күн бұрын
You can move the usb hub to any side, just need to unclip it
@TheBalaskas 10 күн бұрын
@@MrRickPatel Thank you! You are the best Mr. Rick!
@Yabfloat 14 күн бұрын
And umm tf do if I cleaned dust out repasted and my 7 3700x is hitting 114
@BuildsWithV 14 күн бұрын
The cooler didn’t seat back down properly. Gotta remove the cooler again and tighten it in a cross pattern
@hneemann 15 күн бұрын
i need to clock my 5 3600 to 4gz to get it silent and stable. thats strange.
@aleman9959 15 күн бұрын
I love this CPU Cooler but its enough for an I9 12900K?
@BuildsWithV 15 күн бұрын
Yeah it’ll work perfectly with the 12900k
@Dsh9x 16 күн бұрын
How do I do the ram
@Marco-qr8jb 16 күн бұрын
Is it compatible with FanControl?
@fboye2378 18 күн бұрын
My dumb self thought that a GPU was completely different than a graphics card...
@imtherealsav 19 күн бұрын
so he said I only have 2 options with nvidia and AMD , which I have neither, I have a GIGABYTE so would i download my model of gpu and download the driver for that model from gigabyte or use a driver from nvidia and AMD just selecting the same gpu
@BuildsWithV 19 күн бұрын
Which gigabyte card do you have?
@Grandmaster-Kush 19 күн бұрын
Great tips on the MOBO standoffs not fitting case to case, I forgot about that
@carlogamer509 19 күн бұрын
Nice
@8thApostle 20 күн бұрын
Basically this is the basics for a basic tube light🗽
@DylanTheOne911 20 күн бұрын
As a person whose pc doesn't have a gpu, I see this as a helpfulp tutorial.
@str1nging961 20 күн бұрын
what he does its not wrong BUT! if you are buying better GPU or just want to replace your old one remember to uninstall your current graphics card drivers
@senselessconsensus 20 күн бұрын
WAY TOO LOUD, GOD DAMN
@GuessWhoTTOK 14 күн бұрын
turn down your volume....just an idea.
@svaneg11 21 күн бұрын
This video has been very useful, thanks for sharing!
@jessezeitler5390 23 күн бұрын
Hey thanks man for the video! This made it incredibly easy and thanks to you I didn't do stupid shit :)
@BuildsWithV 23 күн бұрын
I’m glad I could help 🙌 thanks for watching 🙏
@Snoopy_dog154 23 күн бұрын
Thanks so much. You seved me ❤❤❤❤
@BuildsWithV 23 күн бұрын
Glad I could help 🙌
@Koorosh5004 24 күн бұрын
Umm hi it still worth it 2024 (for i9 10900k proccessor) ?
@BuildsWithV 23 күн бұрын
I think it’s still worth it and would work well. If you can go with a 360mm I’d do that but otherwise yeah it will cool the i9 just fine.
@arcywafu 26 күн бұрын
i dont have a 3pin on my motherboard, will it still work even if i dont plug it in? what's important is the USB and fans right?
@keremarslanpay2728 26 күн бұрын
How do I change the colors?
@kanvardeepbainsal9558 27 күн бұрын
Hi, I am new to PC stuff, so i was wondering where the NZXT USB hub connects to, and do i need it if im using 2 sl140 fans, and a lian li radiator?
@black-vq8et 28 күн бұрын
It doesn't snap for me
@MrDaddynomates 28 күн бұрын
Thanks. This is a very useful video. I'm building a new gaming rig. I haven't built one for 15 years. Things have changed a bit since then. I was confused with all the RGB wiring and hubs etc. Good job, man.
@emilyhossen7425 28 күн бұрын
thank you for being so thourough and meticulous, i am a common idiot and you helped me understand everything! gold star to you :)))))
@BuildsWithV 28 күн бұрын
I’m glad I could help! Thank you for watching and your awesome comment 🙏