How to Install a Case Fan in your PC

Just a quick & short video showing you how to install a computer PC Fan with or without RGB. This applies to basically any PC fan with some minor differences between them. Thanks for watching!
BuyMeACoffee - www.buymeacoff...
*The Fan in this build: amzn.to/3h428Di or amzn.to/3iMgFDV
*4-Pin 12v RGB to 3-Pin 5v ARGB Adapter: amzn.to/3fZWMrf (Out of stock) or this one: amzn.to/34lb3wF
*Fan hub (up to 10 fans): amzn.to/2QfD6FB
How to Install a Liquid Cooler: • How to Install a Water...
PC Build Playlist: • Building A Ryzen PC
*As an Amazon Associate I earn from qualifying purchases without any additional charge to you.
*Any money I may make via Affiliate or other means I will reinvest into my KZbin channel. Thank you for the support.
Checkout my apparel: builds-with-v....
Follow me on Instagram and twitter
/ buildswithv
/ buildswithv
For business inquires: [e-mail]
**Your results may vary. I am not responsible for any damage. Do this at your own risk.
#PCBuild #CaseFan #AddressableRGB

[@BuildsWithV]

Thank you all so much for watching! I recently released some merch through teespring and it would mean a lot if you could check it out and comment to let me know what you think. Also if you have any suggestions feel free to reply as well. Link: builds-with-v.myteespring.co

[@gamerfruits5231]

Thank you i want to install my RGB fans into my gaming pc thanks :).

[@mikeoxlong4737]

So... I just got my case fans. But me being me didn't look to see if i have all the right outlets on my motherboard. But I couldn't find any outlets for my fans except for the ones that are already being used. (My PC is prebuilt and my motherboard is the A520M-A PRO AMD from MSI) but now when I went to plug the Fans in (they are RGB fans) i couldn't find the outlet. I went onto the MSI website for this motherboard and found out that it only has 2 outlets for fans. The System fan 1 and the CPU fan 1. But other than that i can't find any others. But i still tried to see if i could maybe just swap out the "old" fan with the new one. The Fan worked but the RGB didn't. Now i didn't try to get the RGB working because i was already pretty upset that i would only be able to fit two fans in, so i gave up. Can somebody give me any tips or tell me something i should try. Pls help :)

[@driptv.]

@@mikeoxlong4737 so you don’t have enough rgb slots for the fans? If that’s the case buy a rgb hub

[@g8way2k1]

Poor bench lighting.

[@zsorens4570]

You forgot to put in a 4-5 minute montage where we hope you provide useful information or some kind of an angle we wanted, where as you just kinda provided some useful information w/o the montage of useless stuff.

[@BuildsWithV]

zsorens 🤣 This is true. Thanks for the laugh Thanks for watching as well

[@rocky-zx6kq]

ad revenue

[@datniggasin3335]

V 5:54

[@dre.7107]

You are awesome, informative and no BS! Keep it up!

[@BuildsWithV]

DRE I really appreciate that so much 🙏 Thank you!

[@rrreeelll]

Man thank you so much, your explanation is so good for me. keep the vid up 💪

[@T-B_22]

Simple and easy thx man :)

[@BuildsWithV]

Glad I could help! Thanks for watching 🙏

[@Crip2Knyght]

What do you do if the rgb cable of your fan has 3 pins but your MoBo has 4 pins?

[@BuildsWithV]

You will need a sata/molex rgb hub like the razer argb hub.

[@Crip2Knyght]

@@BuildsWithV is there any way you can give me a link to where i can find this razer argb hub please?

[@BuildsWithV]

@@Crip2Knyght sure thing, you can find it on Amazon here: amzn.to/3thbqRL Also I have an install video here: kzbin.info/www/bejne/d5zQqXuEoNCSlZo

[@Crip2Knyght]

@@BuildsWithV thanks so much

[@ADRASTEIA03]

It's not as powerful as I thought it would be, but it works very well. kzbin.infoUgkxGjG43--gYqIoT4Xkur2PqCrtbKwTv2h6 There are three options to circulate air, and best of all a remote control for us lazy people. Installation was a breeze (no pun intended). It actually took longer to open the box then it did putting the side extenders on and sitting it in the window opening. It's a perfect alternative when you want airflow, but not the AC. Just might order another one for a different room. UPDATE: Bought another one like I said. They work great. Why not have two...

[@ioioiooioiiiiiiiiiiiiiiiooo]

this guy just helped out everyone props to u man

[@BuildsWithV]

Senpai NUTZ thank you 🙏 I’m glad I could help out. I had no idea a video like this would be so much help.

[@eetthhaann4806]

It’s very straight forwards to put a rear fan in, I’m looking for a way to take out the stock fans in the front

[@ioioiooioiiiiiiiiiiiiiiiooo]

@@azazel6205 "and i love you random citizen"

[@butterswift4246]

get it? props.

[@KelBShobra]

What about the front fans?

[@lawsy6044]

Why do you only have 300 views on this when I couldn't find another video to do what I was looking for thx so much

[@BuildsWithV]

I have no clue 😅 thank you, I appreciate it

[@jonathanaraya3212]

x2

[@matpro0]

same

[@MegaNightwing101]

Faxxxx

[@itsmeaspara_gus]

Builds With V hey

[@Crick1952]

This video is so good. Building my first pc and nobody explains this part.

[@Blacksn0w13]

I serch from to day about this part

[@lyo6200]

Sameee

[@theskywalker8416]

no pc builder show how to plug fan cables which is strange ngl. Before this idk which cable is the power and which one is the rgb ngl

[@esscee96]

This was way better and so much more clear than all the other videos I saw even from bigger channels. You actually zoomed in right up close to the connectors on the motherboard, showed their labels referenced along with the manual too, explained the basics of intake and exhaust for the fans! Thank you for taking the time and effort to make this. It's been really helpful and I appreciate it.

[@BuildsWithV]

I’m happy it helped so much! The funny thing about this was I wasn’t even planning this video. Didn’t think it would help so many people and yet it’s my highest viewed video 😅 I appreciate all the comments and all the love! Thank you 🙏

[@hattanbashir]

Just fried my motherboard because of a bad RGB wire placement

[@Esspppiia]

This was a HUGE help since I have the exact same fan; although I have a different motherboard but it gave me an idea about how to run mine :)

[@BuildsWithV]

Awesome, I’m glad I could help. Thank you for watching 🙏

[@bondandng]

Little tips: if you tryna to screw 4 screws or more. Do the X move, so basically if you screw the top right part, the second screw must be on the down left part. It's more easy to screw with that move because the part you gonna screw isn't dangling like in that video.

[@anders1168]

Thanks for the help! No messing around with sponsors or stuff like that, Just right on topic.

[@kasino7132]

you got straight to the point without all that other extra bullcrap i hate from most youtubers.. you are a national treasure my friend ....you got a new sub!

[@muck2744]

This was the tutorial that I dreamed of! Super straightforward and helpful! Thank you

[@jen3849]

**THANK YOU** for a clear explanation with UP CLOSE shots and not a lot of tech jargon. So easy to understand and learned new things I didn't even click on the vid for. Good job!

[@BuildsWithV]

You’re very welcome and Thank YOU for watching 🙏

[@evilAshTheDog]

Yeah, I was thinking the same thing! Great video.

[@yashpaulsabharwal8438]

​@@evilAshTheDogno

[@imreallycolbtw6445]

If you guys were wondering which way the fans go, (sucking in and blowing out), 1:00 should be the best part Hope this helped. Plus thanks for this amazing video. You out it really simply right at the beginning 👍👍

[@BuildsWithV]

Imreallycolbtw thank you for that and thanks for the support 🙏

[@VentwosWingblade]

Ty for this, I was looking for this specifically.

[@kiba000ify]

Thank you I know nothing about pcs I'm dumb I needed this lol 😆

[@eroalvarez2958]

Can you tell me which is the fan that you show that only has 3 pins?

[@caffeinatedghost7316]

Its shocking how few videos are this simply explained and easy to follow like this one ❤

[@sebaaullador1292]

Hi, i bought a noctua fan and connect It to the motherboard using his 4 pin (no extensión, no low noise adaptors) the thing is tha spins slow (200-300 RPM) did i do something wrong?

[@Blacksn0w13]

Two days ago, I was looking for a video explaining how to install the fans in a clear way. Most of them listen to the device and ignore the way to connect the fans, and after watching your video, you explained everything clearly. Thank you very much and good luck.

[@BuildsWithV]

Glad I could help

[@jacobwoodcock4683]

I’m so fuckin dumb, this was so helpful lmao

[@victordinu1613]

Thank you sooo much this is exactly what I needed!!!

[@BuildsWithV]

Victor Dinu Awesome! Glad I could help. Thank you for watching 🙏

[@pickle4286]

Mine says CPU_FAN and I don't have any SYS_FAN will cpu_fan work

[@Brawl_stars-p5t]

No

[@Gr8Imres]

i feel like this part is so simple it's step is skipped in most build tutorials so nobody knows how to do it, but thanks to this guy we do.

[@BuildsWithV]

I almost didn’t post this video because I thought the same thing. But I was like eh might as well. This video is my highest viewed video 😅 I’m happy to help and glad this helped so many people!!

[@billybobs1705]

@@BuildsWithV now show us how to install a fan cable if you have an adapter

[@korruption2802]

Havent seen a single video that explains how to tell the difference between the front and back of a fan

[@BuildsWithV]

I’m glad I’m the first 😅 My goal with this channel was to explain things as well as possible. I watch videos all the time and got tired of seeing those “beat around the bush” explanations. Just get to the point please 😂 Thank you for watching 🙏

[@Mista808]

Spent over 4,000 dollars on a prebuilt PC from Alienware and the hardware far exceeds the cooling capabilities of the case it came with. The Aurora cases are absolutely terrible in regards to airflow. Modern Warfare on medium to lower settings still crank my GPU temps to up to 86 degrees and in the red. I know 86 won't exactly burn up my card but it's still far hotter than it should be with the hardware that's in my PC. Lesson learned. I'll never go with Alienware again. Unless of course they stop providing their customers with low end cases! Because of this I'm desperately trying to find alternative methods to lower my GPU temperatures when I'm playing demanding titles such as Modern Warfare. I wish I was a little more experienced with building PCs myself. I'd really like to transfer all my components from the current tower over to one that has much better airflow. I only spent $1400 on my son's off brand PC and that tower is so much better at cooling than mine is. It's quite depressing. 😑

[@bercedes420]

straight to the point, no useless talking

[@backtothegrind8180]

Thank you so much I had a 3 pin connector and had no idea where to put it your a really good utuber you just got yourself a sub

[@BuildsWithV]

Glad I could help! Thanks for watching 🙏

[@MisterDeathly]

thank you for actually talking and telling us what we needed to know instead of just playing music, I really appreciated it thank you again.

[@BuildsWithV]

No problem at all! Thank you for watching 🙏

[@DirtMerchant693]

If a CPU has a stock cooler do they take up one of these fan slots on the motherboard? (Also good video my man)

[@BuildsWithV]

No, so the CPU cooler (stock or aftermarket) will plug into a separate fan header; usually named “CPU_Fan” or something like that. If you have a liquid cooler, the CPU block/pump will usually plug into the designated pump header and the radiator fans would then plug into the “CPU_fan” header, however every motherboard is different so I can’t say for sure. I really appreciate the compliment, thank you 🙏

[@DirtMerchant693]

Builds With V right on I appreciate it!

[@Slw3hundo]

Great video fam! But where else can I plug in the rgb connector to the motherboard I currently have GIGABYTE B450 AORUS M? Any help is appreciated

[@cheezeballcity]

Thank you! This is the exact video I needed to help me with my first PC build in this Covid epidemic! I'm subscribing!

[@BuildsWithV]

Awesome! 👏 Congrats on the build and thank you so much 😊

[@bac3938]

Hey man, thanks for the video! I just have one question. So if I have a 3pin fan, can I put it in 4pin motherboard?

[@BuildsWithV]

Yes you can

[@RantTherapist]

Thanks man. It seems simple, but I'm new to building my own PC and pretty paranoid about doing something wrong and screwing it up. Better to double check to be sure I'm doing it right lol. Great video, much appreciated.

[@allfather55]

I want a MASTER CASE H500p mesh it comes with 2 massive fans and I want to add 1 more fan and 3 fans for the radiator,my MB will be X570 I think it didnt has more than 3 sys fans,I want more than 3. What Should I do plz help

[@BuildsWithV]

All you need is an extra fan splitter.

[@ramm6035]

dud ur OP. thanx man(even tho i dont have pc). :)

[@Pedro94-dp]

Best explanation man thanks a lot. I didn't know how to install it's my first time! I have six fan how many should be intake and exhaust?

[@BuildsWithV]

@@Pedro94-dp no problem, glad I could help. So I always recommend front fans as intake and top fans as exhaust. If you have bottom fans then those are intake and if you have rear fan then that would be exhaust.

[@Pedro94-dp]

@@BuildsWithV Got it man thanks

[@redbeebreadsYT]

I put my cooler master fan in the sys_2 fan snd it did not work i even checked the motherboard is says rpm N/A

[@Blinkycs28]

Thank you this video dropped 3 years ago but it helped me today!

[@TrollProductionsMC]

I bought a new case the Lian Li lancool ii mesh so I transfered my pc build from last year into this case but I have B450M pro-vdh max motherboard and the lian li has 3 pin 5V rgb, my motherboard only has 12V JRGB1 , can I fix this somehow or do I need to buy new fans? edit: please like my comment so i get notification you replied

[@BuildsWithV]

You can get something like the razer ARGB controller or a different controller that is powered by sata power and controlled with a remote. It depends what you’d like, you can switch fans to use the 12v rgb but that’s up to you. I personally prefer the 5v ARGB fans due to their lighting.

[@TrollProductionsMC]

@@BuildsWithV thanks alot for the fast reply!

[@BuildsWithV]

@@TrollProductionsMC you’re very welcome and thanks for watching 🙏

[@RedDragonZ81]

U know the 3 pin connecter to connect to the bottom of the motherboard? yeah mine has 2 pin? I don't know if that is a problem or it doesnt matter. Someone tell me.

[@FactFlix3]

2 pins are are and old now so not many people will be able to help u sorry

[@RedDragonZ81]

@@FactFlix3 I am taking about the one that u would plug into the Powersupply.

[@vaibhav13able]

Wow great commentary you pretty much cleared all of my doubts. Thanks Man

[@BuildsWithV]

No problem at all, thank you for watching 🙏

[@QuesadillaSlam]

My motherboard doesn’t have a dl_1 slot of whatever that 3 pin is

[@hashiragaming8501]

i use asrock a320m motherboard... can i install that fan without stick the rgb cable and still got rgb ??

[@BuildsWithV]

If you don’t plug in the RGB cable then you won’t get any RGBs. The fan will still work but won’t light up.

[@hashiragaming8501]

@@BuildsWithV 👍thanks for explain

[@GimiBsk]

One issue I saw is that you don’t know how to tighten screws. You should always criss-cross them and tighten them gradually and when they are all set then continue to tighten them more again in criss-cross pattern. It might not be so crucial that the cooler is tightened unevenly but it’s good to know when you say change a wheel on your vehicle..

[@BuildsWithV]

I’m very aware of that. For a fan on the case there is absolutely no need to do that. CPU cooler is 100% necessary. Lots of car work it’s important. When you rebuild a motor that’s also very crucial. I’ve rebuilt several 👍 Thanks for watching 🙏

[@GimiBsk]

@@BuildsWithV yeah I felt that you probably already knew that, it’s common sense but someone who will see this comment might still learn something new. Keep up the good work 🤙

[@BuildsWithV]

@@GimiBsk that’s a great point. It’s no worries at all. There are plenty of people who don’t know and I do appreciate you bringing it up. Basically anything that has two flat surfaces that need a near perfect contact like a cpu and cooler absolutely should have each corner screwed in place equally and in a cross (X) pattern. When I started building my first motor like 10+ years ago I had no clue and wondered why I couldn’t get the head seated properly. After a bit of google I figured it out 😅

[@chanjianan1946]

I have a question here! If my pc is already included 3 rgb fans in front can I change it?

[@BuildsWithV]

Yeah you can change them if you’d like

[@chanjianan1946]

@@BuildsWithVthanks for replay I appreciate it. ;D

[@whoeverwhoever400]

Mine is 5 pins and two rails on each edge. Wtf. What do I do? 😂

[@Milansef123]

Wtf bro help me i have Aourus Motherboard and look at the picture, i bought CoolerMaster Sickleflow 120 RGB and i plugged in one cable in Sys Fan 2 and i dont know where to put this second cable for RGB (3pin 5v). Can you tell me where should i plug in it? Maybe it is over here?? prnt.sc/x8im26

[@walnutz]

its possible to mix two different case fan? Antec Prizm 120 ARGB 5PCS Plus and ARCTIC F14 PWM PST CO Case

[@kiba000ify]

My ex built my PC and I didn't know how to get the fan back in and I believe it was in the wrong place too lol

[@chasehannah4287]

I literally just hooked up this exact motherboard and and fan, and the rgb on my fan won't turn on. I'm using the top right header for the RGB, is this something I can fix in the BIOS or would this be a hardware issue?

[@claytonfrommel4605]

#1 the top fan is rattling against the case. take it out of the case and set on table sideways (narrow) it makes no noise, but flat horizontally screwed against case. noize ? :( #2 there is no plug and play method the fan tail(wires) look threaded into white plastic box with no way to remove wires. that rail. is not connected to the mobo but connects to a larger white juction box whre more cables are coming into from other fans.

[@yoshicebear9565]

thanks man i was lost with the pins ... but your video helped me a lot

[@BuildsWithV]

Glad I could help, thank you for watching 🙏

[@TheJuggerClutch]

Just to clarify: you don’t need the wrist strap attached to the case to keep the motherboard from frying from static while doing this? Trying to make sure before I go through with my replacement, as I cannot find my wrist strap lol

[@patatathganith1174]

What if your motherboard doesn't have any more rgb connections?

[@BuildsWithV]

You’ll need either a splitter or a rgb hub

[@patatathganith1174]

@@BuildsWithV Thanks man i really appreciate your help!👍

[@kashfox1050]

VERY EASY TO FOLLOW, INFORMATIVE, AND HELPFUL. Thank you brother. All glory to God! 🙌 Amen! 🙏

[@zyrokuu]

Well yeah, but if your fan runs at full speed that ain't "perfectly fine" not a single second, that thing is gonna sound like goddamn rocket taking off. Unless you are crypto miner, idk what is full speed fans for. My ears just start bleeding whenever fans are at full speed so yeah.

[@WilliamHesser]

I had to replace my case fan and just got a new one. This video was very helpful!

[@eddiemattison7792]

Thanks for the video. What if I have already used the 3-pin LED-1 RGB header for the 3 fans at the front. Can I use the LED-2 right beside it (and will I need an adapter or will I need a splitter)? Thanks!

[@skyless8340]

Hi I’m just now setting up my first ever build and I have the same fans as you, I’m trying to figure out how to work the RGB, my headers have 4 pins and not 3. I’m using a asus x570 pro motherboard. I’m using the hub the fans came with and they all run just no lights. If you could offer some advice I’d be very greatful!

[@BuildsWithV]

Are the hubs plugged into sata power? These won’t be able to be controlled by software with your motherboard unfortunately due to your motherboard not having any 3-pin headers. Just make sure you don’t plug the 3-pin cables into the 4-pin, you could fry something since they use different voltage.

[@skyless8340]

@@BuildsWithV yes all the fans are plugged into the hub it came with and the hub is connected with sata

[@BuildsWithV]

@@skyless8340 Okay, how about the RGB cables? Are those plugged into the hub and sata?

[@skyless8340]

@@BuildsWithV I think that’s where some of the confusion comes in I’m having a hard time determining what’s what like I said I’m a beginner lol. I only have the cables that power the fans connected to the hub, I tried daisy chaining the fans and it didn’t change anything. I have a silver cable coming from the hub connecting to my mother board and my dad said that should be the rgb but it doesn’t seem to change anything either weither it’s plugged in or not.

[@BuildsWithV]

@@skyless8340 Okay, I completely understand the confusion. The silver wire that goes from your motherboard to your hub is actually for fan speed and not for RGBs. There should be a second hub that these fans came with, that hub is for RGBs. Since your motherboard doesn’t have 3-pin headers, you won’t be able to plug that hub into your motherboard. You can however plug the second hub into your sata power like you have your other hub. Then plug all your RGB cables into the hub itself. The RGB hub has some buttons on it that can control the RGBs. If you have Instagram feel free to DM me on there and hopefully I could help more. @buildswithv on Instagram.

[@wiz3905]

Dude! Clearest D RGB Cooling Fan wiring setup👍 Thank you Going crazy w/ lack of instructions these expense eye candy come with! Like your case, what is it? Do a Daisy chaining setup video. Wall is all these different brands don't necessarily work the same, crap industry standards!

[@jeneb52]

Would this be basically the same thing for a Dell PC ? My brother says if it's not plugged in correctly the PC won't turn on! It's got a funking looking plug .

[@user-fo9ce3hr5h]

Hi I have 2 question Is SYS_FAN same as CHA_FAN (4 pin) in my motherboard? Are these CHA_FAN 12V? or 5V? Bcuz my fan case are 12v.

[@demontank76]

It is probably the most helpful video I have seen about installing fans!

[@aimee9925]

So the only 120mm intake fan for my old thermaltake armor VA8000SWA full tower screws into a removable 3.5" HDD cage which takes up three slots of the ten 5.25" bays I have. I'd like to put another 120mm fan (or even a 140mm?) above it but there's no holes to fit them in. The only thing I can think of is getting another HDD cage but I wonder if there's some kind of bracket thing you can get?

[@funnyjackkk]

they don’t plug into SYS_FAN,my fans plug into this LED CONTROL SYSTEM but I no longer have that cus I upgraded psu and now I can’t plug my fans in please help please

[@benjahumildee]

one question, i have a Sentey 6090 box that it has a 12" blue led fan, and it has the conector. and also i have a msi b560m a-pro mboard, that it has only a sys-fan plug, and a cpu-plug... the cpu is already conected to a rgb thermaltake cooler, and the sys-fan is conected to another thermaltake non rgb fan to the back of the box, like in your video.... my question is, where can i conect other fans to the mother? i have the sentey that's included with the box but not plugged, and i have other 4 fans that i want to conect in the bottom, upside the box... can you, or anyone help me? thanks

[@rura8942]

I just completed my first build however the front three 120mm case fans are not spinning. The rear case fan and AIO Cooler work fine. Any advice would be useful. Case: 4000D Airflow Mobo: ROG STRIX B550 F Gaming

[@Sharif-666]

Didn't work for me I have h370 aouros I have 3 pins capel I have 3 pins the digital thing But my fan didn't fit the pins Its airflow 120 coolermaster Anyhelp?

[@Gabriel-sy2bp]

Ok so I plan on installing 4 Phanteks D-RGB fans to my p600s, if I buy the 3 pack it comes with a PWM splitter and a Motherboard drgb adapter, if I buy a single will I also need to buy a DRGb adapter for the 4th fan?

[@thecanadian6958]

Just came across your video. I just had a system built, but forgot to include a rear fan. I have three in front, two on top. How do you install a fan in the back if the GPU is already installed? Its a Corsair 4000x. The top fan is a Kraken z53 and the front fans are the ones that come with the system.

[@redwood5998]

I have the proper screws but my screws just aren’t fitting my case fan? Like I’m screwing but my case fan isn’t getting tighter even though everything should be compatible

[@nicolofratini5053]

hi man, I have a question for you. I have a fan that was included with the case and it works fine, but I can't light it up cause the fan has a 3 pin connector for rgb and my motherboard has a 4 pin connector for rgb. Any ideas?

[@TON-ob7ib]

Hey dude! I have a question, the case that I am buying is the Montech X2 MESH and it comes with 3 RGB Fans pre-installed, Will this also work for the case rgb fans?

[@eszterminator]

I have a problem: my RGB cable is the same like in the video, but my motherboard has only 3 pin, so I can't stick them together. Does anyobody know, what can I do now? :(

[@cor.tenebrarum]

Where do I plug chasis control board MB FAN sync connector on the Motherboard? Any of chassis fans connectors (CHA_FAN 1, 2 and 3) or high ampere fans connector (H_AMP)?

[@seren3462]

as a PC noob I didn't know you could connect the fans either to the motherboard or the PSU... and I've noticed all mine are connected the PSU which are on 100% of the time and I have 4 pin functions on mine to change it but tbh I don't mind

[@aizen.x.9312]

hello, can I ask your opinion on choosing a PC case, antec nx410 vs abkoncore c550m vs xigmatek beast , let me know your opinion

[@lyziqco6555]

I don't have a rgb 3 pin connector, only the system fan connectors, on top of that the fans that came with the case has molex connectors, so I had to plug them directly into the psu and my rgb now looks like rainbow puke, anyways is there a way to control the rgb and make like just one static color?

[@rjt201]

Hey so I have a Corsair 4000x case, just got a Corsair ll120 fan and the screws that came with the fan have too small a thread to tighten into the holes provided, the case also didn’t come with nuts which would’ve solved the issue. Am I missing something or should I use zip ties which looks like

[@highjim7778]

thats the cleanest case ive seen, epic cable management. Thankyou dude

[@BuildsWithV]

Thank you so much for the compliment 🙏 I really appreciate that

[@soulz4640]

I need help, i got a prebuilt pc with the sidepanels fans being intake but I want to switch them to exhaust but I dont know how to, can someone explain me what to do? Oh and the motherboard is a ASRock B560M-C

[@faizi_99]

My motherboard has 4 pin for rgb and my rgb fans have 3 pin. What could i do to plug it in?

[@letrface_8596]

So I don't have to install anything? Just plug and go? I took tow from my old pc and my new pc currently has two, but I have two more slots to plug some into so I'm hoping the 4 fans will help make it run better

[@VRUAN]

You were talking plugging three pin into four pin socket (3:51), but your hand were holding a four pin wire. And the rail you mentioned was not clear. I am having a three pin fan wire plugging it into a CPU four pin socket, not knowing to plug it into the socket using the right pin alignment or the left. I was so hoping to get an answer from you man.

[@deadmanwalking1930]

I have a phanteks p500a and am trying to install 3 120mm at front but I see no way to screw 3 in. I can see how 140 goes, but 120 there is no way I can see. Please can someone help

[@gamerboy2507]

I dont have a pc yet so if i wanted to plug in fans rgb do i have to plug in more than 1 rgb cable or only 1?

[@JesusGonzalez-ft7ec]

If my motherboard doesn't have an RGB connector/header on it, can I use a 3-pin to USB adapter for it to work?

[@samulation5047]

I’ve been looking for a video which explains how to install the front fans… I bought a used on but the screws that came with my case don’t have anything to be inserted in, so the fan can’t be bolted to the case.

[@tristankopp8785]

It’s a good tip to mention having magnetic tipped screwdriver is almost a must in building your pc

[@PeripateticExplorer]

What i have to do if I have only 3 Sys_Fan, and I have 4 coolers? How much coolers will be enough?

[@immortalx4532]

My fans just aren't spinning. My motherboard (b550m M-Atx) doesn't have that 4 pin connector on it

[@ghostfacekilla666]

lol my pc turned off and didnt wanna turn on so i let it sit turned it back on and fan was not working, turns out i installed my fan backwards since 2016 lol thx for the info - still don't know why my pc turned off in the first place

[@DjPrinceRaj]

Hello, I Have Corsair SP120 RGB Pro Single Fan, And I Want To Connect With MSI B450 PRO Vdh Max Motherboard, The Mobo. RGB LED HEADER. And the Fan Have 2 Cable With 4 Pins. One Cable I Have Connected With SYS_FAN And Other One Connected With RGB LED HEADER. BUT ONLY FAN IS RUNNING.

[@BuildsWithV]

Corsair fans require their software and their rgb hub to work. The fan will work plugged into your motherboard header but the rgbs need their special hub

[@AngryMbunaMan22]

I have a fan hub and I can control the rgb with a switch on the case , however I bought a mother board and I want to control the hub with the mother board please tell me how, ...msi b550m mortar and I don't know the name of the hub.also my fans in the hub are 6 pin

[@a_ttd3dancer]

ur the pnly youtuber that made a viseo like this. u saved me hours, and alot of money. im lucky i didnt buy another pc case

[@kyleparker8378]

How do you color sync all of your components with rgb for that motherboard? I have the same mother bard basically and don’t know how to sync all the rgbs