Bul armory 1911 COMMANDER

[@mograceagain]

First time I've ever seen a Bul Armory not work.

[@rymo10001]

Anyone else have trouble with ejection??

[@Defenze]

Beautiful gun. The issue with the gun not going into battery and not staying open on the last shot is usually a magazine issue or a ammo issue. Bul Amory has a great reputation for quality. 45's traditionally need time to "break in". I'm sure you will love the gun as most do.

[@TPMAKHOME]

I would try some Wilson combat or Chip McCormick mags, those mags have cured almost every feed issue I have had on a 1911. When I buy a new 1911 with the exception of Nighthawk, I will sell the mags that comes with the gun and replace them with Wilson or McCormic mags. If those mags do not cure it, I would take a good look at the feed ramps.

[@hotdog7346]

Ok ok. Clam down everyone. Talk to us after 500 rounds. Every gun needs break in period.

[@dfabove9108]

Clam Down??

[@bill-qv3er]

I have around 1000 rounds through mine and have never had an issue. Got to use good ammo, not cheap stuff. I also use Chip McCormick magazines.

[@231mac]

My Magnum Research (made by BUL) had two fail to go into battery in the first 100 rounds. The new mags springs were super tight and I was firing flat-nosed ammo. Cleaned the gun ran another 100 rounds, except with the correct ball ammo, and no more issues.

[@shaunlogan6543]

Most likely the issue is with the ammo… I wasn’t using proper ammunition when I first shot it and had similar issues..

[@eolson1964]

please do a follow up. Are you still having issues or has a break-in period resolved issues?

[@rja3680]

Looks new... oil?

[@6793student]

I have the same issue with mec-gar mag with one mag out of 8. Bul uses mec-gar mags. The other 7 mags ran flawlessly. 1911s are often having issues due to mags.

[@jerroldkazynski5480]

I heard Chip McCormick 45 ACP mags are good, too. Then made mo betta recently. Couple others are good, too.

[@criticalthinking3709]

I rented a DWS 1911 and couldn’t through a mag without multiple failures to eject. Not confidence inspiring to say it kindly.

[@daleinwv]

did you oil it first

[@reese8752]

In 50 rounds, I had 1 failure to lock open on a last round. I never had a failure to go not battery.

[@AlanGordon-fm4ks]

Did you clean and oil the gun before you started shooting?

[@tomnelson3362]

Did you ever fix your feeding problems? I found that with mine I had to make sure the cartridge sat completely down in a case gauge or it had problems. I also went with ACT-MEG magazine and that helped.

[@vmanshooting]

any updates on this bul armory?

[@rymo10001]

Anyone know of ejection issues? I had one snap off. I’m waiting for Bul Armory to get back to me.

[@TheNorthsquad]

Send it back to Bul in Miami, sorry you have the issue

[@dattape2828]

Did you send it in? What’s the result? Thx

[@jet1blast]

Get some Wilson Combat magazines, they're a bit pricey but TOP NOTCH quality. It's what I use on my Colt 1911.

[@Dachamp2001]

1st time hearing about bul armory lol im liking it. i see the usual 1911 fail to feed. I would swap it out for a willson combat mags those are my go to.

[@ChrisFromThe740]

Beautiful Gun hopefully it breaks in and you get all the kinks worked out

[@Rangebrostv]

Thanks man I hope it goes

[@ARPatriot1776Official]

Nice gun! Enjoyed this!

[@Rangebrostv]

Thanks ar

[@8626John]

Good review. Have you been able to work through the issues?

[@meme-ss6ho]

I own this same gun, have had a few times it fails to lock open on last round, I checked my grip, fired several more magazines WITHOUT an issue……. Never had the failed to go into battery issue……. That being said, I watched this video several times….. I believe your issues are maybe caused, like mine were, from poor grip mechanics…… I notice the weapon moves around in your LEFT HAND a bit……. Which if you know anything about stove pipes, etc……. They are instituted by lack of a firm, proper grip….. there used to be a video floating around where a guy took the most reliable hand guns at the time, and showed he could make them malfunction by using a POOR GRIP……..L

[@isidrosevier1125]

I was thinking the same thing, more if a limp wrist issue. Needs a grip mod.

[@nataliedeyton6829]

You wanna try one of my Wilson combat mags ?

[@Rangebrostv]

Yea sounds good

[@bellaphone5719]

wilson mag is a fine mag thats all i have to say

[@rickiequillin1304]

Did you ever figure the issue out?

[@TexasCorgiGun]

Hello, follow up on this ? The issues continue ? Thanks 🙏🏻 Happy New Year btw

[@Rangebrostv]

Happy new years to you also. An I will definitely do a update on this gun

[@TexasCorgiGun]

​@@Rangebrostv Hey brother, did you make thta follow up video ? I can't find it.

[@SMASHTIME]

Nice bro

[@bradleytaylor8296]

Mag related

[@goldgitter3548]

Weak wrist

[@littlerascals6529]

Change your mags

[@thehilomonsterE]

Man... Bul is my personal absolute favorite handgun manufacturer. You get all the high end features with none of the high-end price. I'd bet my bottom dollar that all your issues were ammo related. I've never (and I've done my research) I mean EVER even heard of a bul armory firearm failing like that. My review of this review: FAKE NEWS

[@totljag1]

Junk

[@231mac]

My Staccato C2 I owned malfunctioned when it was brand new also.