BUL Armory SAS II Tac 4.25 Tabletop Review and Field Strip

[@GBGuns]

NOTE: The pistol comes with two magazines, the third was additional. Article with specs, etc: www.gbgunsdepot.com/post/bul-armory-sas-ii-tac-4-25

[@cramerlong2276]

How is anyone getting the Bul Armory Tac Models . I have never been notified once in nearly 2 years of being on a wait list . Do I need to renew it every so often? Humble Marksman pulled some strings again ? I know you mentioned that in the Sas UL video

[@GBGuns]

@@cramerlong2276 You may need to, I know some models have changed in small ways. It could be that when they replace the SKU (nut not necessarily the name) that it resets. It seems like BUL likes to make annual updates.

[@cramerlong2276]

@@GBGuns thanks . It is rather frustrating .

[@GBGuns]

@@cramerlong2276 I get it, and my answer is just a theory, but I've noticed too that some things are in-stock, then out, and that there have been some changes to the models over the last couple of years.

[@shawnmrfixitlee6478]

BUL knocked it out of the park ! That is a very fine gun .. Love it 👍👍

[@granddad-mv5ef]

While I may never own this firearm (getting old), I believe it is every bit as good as you suggest. From my three Bul Armory firearms, with thousands of rounds fired, it is my opinion they are better than almost anything in the price range.

[@michaell397]

The Bul Armory offerings are fantastic! Unreal at the price. I would love to order ne of their double sack 4 1/4" versions. Very nice!!! For every day carry, I carry a Les Baer TRS purchased long before retirement. Very Very accurate 1911!!! Many rounds thru it and never a bobble of any kind. So much for complaints of their being too tight. LOL ;

[@markhenderson7556]

Very much appreciate your reviews. They are alway to the point and educational. I just received my SAS II TAC as well and am looking forward to your range review and hear about your shooting experiences. Thank you.

[@GBGuns]

The range video is available through the pinned comment.

[@cramerlong2276]

Mark Henderson *How did you get a Sas II Tac?* I have had my name on a list for 20 months . I have never been notified of any back in stock ever . I just looked at the Site and everything is still as always SOLD OUT

[@markhenderson7556]

@@cramerlong2276 I signed up on the waiting list and made sure I did it a couple of times over about a six month period. When the notification came through, I did not wait, as I knew it was in high demand. I is truly an amazing firearm. I think it was worth the wait... put a Holosun 508T Green Dot on it. I'm truly enjoying it.

[@oceaser6977]

@@cramerlong2276they’re available rn online. I bought mine (SAS Tac II 4.25 w/ optic) about a week or so ago and my FFL called today to say it’s here

[@scottmackey4182]

Bul Armory makes an exceptional product for the money. Outstanding quality, functionality and design IMHO

[@sigpig912]

14:34 Man i love mine. I put it in rotation and started carrying it immediately...

[@GeorgeMoilanen]

I love your reviews. Best out there. I appreciate your consistent format, Thank you. George

[@dalerobbins4737]

Been waiting on this one to come out I have the SAS II 4.25” & 5” pistols and I love them. Look forward to your range test . BUL Armory Never disappoints Great table top review ⭐️⭐️⭐️⭐️⭐️

[@GBGuns]

Thank you. The range video is available through the pinned comment.

[@dalerobbins4737]

I watched it very well done

[@Tradewerk]

If you could only purchase one which would you choose between the 4.25" and 5"?

[@AprilT-nz1te]

Hey there from Florida! Would love to see more of Teya’s shooting impressions. Being female with small hands, I love her reviews!

[@GBGuns]

I've been trying to get her to the range.

[@TheHumbleMarksman]

tac 4.25 is a winner! Also - YT won't give me the mercy shelf - you fancy!

[@GBGuns]

The merch shelf is a waste of time. Maybe if we had cool artwork like you do we'd sell something.

[@Styxx2018]

I love mine too! We must have gotten it from the same batch. I now want to try the Hatchet FS!

[@arthuroubre7562]

I changed out the guide rod with a Dawson tool less guide rod. This is the guide rod system Staccato uses in their 4.45 P model. It works great no problem

[@unixfool]

OMG! I didn't need to see this! I bought the SAS II UL two months ago and the biggest difference I notice (aside from the barrel fluting) is the grip. I don't know why Bul Armory didn't include the 4.25" Tac grip style on the SAS II UL. Probably because they considered it too aggressive for concealed carry. I think I'd rather have what's on the Tac grip (aggressive texturing and the checkering) than what's currently on the UL, though, because the UL's grip feels a bit slick. Granted, if I tamp down on the grip, it sorta mitigates the slick feel.

[@NoNo_IStay]

Perfect size. Thanks for the Saturday video

[@fattigla]

Great camera work, from what I've seen the Bul armory pistols are the best value 2011 out there, seems the only negative is that they are a little harder to find.

[@jknewb6276]

Yes sir they don't send their firearms to FFLs like Glock, Springfield and other's do. One has to do plenty of research then order from a FFL from BULL ARMORY then you get sent to the FFL. I personally don't like the style they do it as people don't really get a "hands on" approach unless someone brings one in to sale used. That's at least the info that I got ......

[@jamesmaysflyingwashingmach7459]

@@jknewb6276 Oh, so you order directly from the company?

[@jknewb6276]

@@jamesmaysflyingwashingmach7459 I only got a little information from someone off YT that purchased from BULL ARMORY and yes in a simplified version that's how it goes, but that's what I'm saying is lame because Glock and others have there pistols on display for people to grasp and get the feel of at FFLs but not BULL ARMORY rather just going for it and paying $1500 -$2500 and one may not like how it fits in there hands.

[@jknewb6276]

@@jamesmaysflyingwashingmach7459 having said that if I had $2500 laying around I order one yesterday.... specifically the comp version

[@GBGuns]

That's because companies like Glock offer incentives and perks for stocking dealers ordeals who sell X amount of products. Beyond that distributors offer similar programs. That's generally why you see the same guns at every shop, and each step in the process takes their cut of profit. Direct-to-consumer permits lower prices and better price control.

[@Zefram0911]

i really love these review and field strip videos.

[@GBGuns]

Thank you.

[@b.c.731]

This is something I think is awesome. I really want one of these

[@peterlowell7963]

This is one of the guns I have ever seen! 🇺🇸🇺🇸🇺🇸

[@Chris-pw3ev]

Love the tt reviews

[@michaell397]

A simple ballpoint pen barrel tip with push the slide stop lever out without danger of scratching your gun using metal. My bench has several that the bank is generous to give to customers. (Besides, you never know when you might need an emergency spitball launcher)! LOL! I do prefer the Atlas tool which both cleans the inside and out side rails as well as push the slide stop out and has a tab to push in the retaining pin when reinstalling the thumb safety, and it is made to not role on the bench. About 10 buck on their site. Wilson and Nighthawk has them as well. ;

[@traeucity6087]

Thank you for mentioning the Atlas 1911 Tool. I had never heard of it, since I can't afford Atlas guns; but I can afford the tool, and I ordered a couple after reading your comment. Thanks, again!

[@michaell397]

@@traeucity6087 Your very welcome Sir! Ah, to be able to afford an Atlas or Nighthawk. Sadly, disabled and forced into medical retirement after 47 years in the Custom Knife Business. KnifeMaker,

[@traeucity6087]

@@michaell397 , I'm sorry to hear that; but I hope you're doing well. Take care, friend.

[@cramerlong2276]

@@traeucity6087 The original name of that tool is called the WIDGET . Lot's of places carrying 1911 parts carry them .

[@traeucity6087]

@@cramerlong2276 , Thank you, very much!

[@jknewb6276]

Love Bull Armory i do have a birthday coming up at the end of June....i love the comp versions....$1500 for the 3.25" and $2400ish for the 4.25" but im not sure BULL ARMORY has a layaway program like Walmart 😂😢

[@wgterry73ify]

This gun with a comp I would buy

[@billbog25]

Love my SAS II UL 3.25. I wish they put that same grip stippling on the 3.25. My only complaint but i can live with it. Great review

[@GBGuns]

I think they kept the 3.25 more belly-friendly

[@unixfool]

Ahh...glad I'm not the only one to notice that. I do carry it without using undershirts though. :)

[@v.german11b]

I like it. Thank you, GB.

[@Quality_Guru]

Looking forward to seeing the Range review on this pistol. Curious if you have seen the Apollo 11 pistol built by live free armory. It’s a similar Pistol to this one but sells for under $1000.

[@GBGuns]

I haven't, but will look into it.

[@texascommtech637]

BEAUTIFUL! Would definitely be my EDC. Looks similar to my Ruger P89 9mm. I will be 70 in a couple months, and if you were thinking of what to give me...😂. And BTW, nice demonstration. Can't wait to punch some paper with it at the local rental range! Wife wants to know if it also comes as a 9mm? Subbed and Liked, of course! 😊

[@GBGuns]

This is a 9mm. You can see the range video through the link in the pinned comment.

[@RareGrooveRoller]

Wish mine came with 3 magazines

[@GBGuns]

Mine didn't, I had forgotten getting another to make the reviews process and training easier. Stuck it in the box, a week later I open the box and thought it came with three

[@scaleworksRC]

What a beauty!

[@elitesless1539]

Good stuff. I ended up being the 224th like for this video and I hesitated because I thought .223 likes is kinda cool. Any who, thanks for this review. I’m shopping that market right now

[@GBGuns]

See the pinned comment for the full review.

[@aaronray768]

Outstanding review as always still haven't decided on this or a Staccato P

[@GBGuns]

I make some comparisons with the Stacatto P in the article.

[@aaronray768]

@@GBGuns it's probably going to be easier to get a staccato,but I want the sas II tac,but I don't tend to purchase anything until I've watched your reviews

[@wardellleake6434]

Great review

[@alancarr3381]

Thanks for the info

[@macgregordespitethem7933]

That modular trigger shoe is a feature I don’t recall seeing on other pistols. I’m on their list, now we wait.

[@unixfool]

I ordered a flat faced shoe for mine. The shoe needed minor fitting. Some folks find that they need to fit ths shoe, while some folks find that it'll slide right in. Just an FYI.

[@dewaynerowe9493]

🥶 🥶 🥶

[@jamesdelong6401]

Sweet!!! 😎👌Pistol.

[@HomeBrewedVapesReviews]

Hoping my wife reads this.... Father's day gift.... 😂😂😂

[@keithrange4457]

10:30 i ended up using the metal leed of an electrical resistor inhad laying around 😉

[@irondavy8356]

Boy does that cat hate CNN 😂

[@Rossski]

Correct me if I'm wrong, but wouldn't it be easier to pull the slide back and insert the paper clip into the guide rod first? Then you can line up the slide release without having to fight the recoil spring. That's the way I learned to do it on a Kimber Pro Carry. Look forward to seeing the shooting impressions :)

[@GBGuns]

I just did it the way the manual states

[@TheArkansasGunGuy]

Fantastic video. New firearm added to my wish list!! What was the tool you used to disassemble the weapon? Need to pick one of those up.

[@GBGuns]

I used the Real Avid Handgun Tool, but anything will do

[@nicholasnapier2684]

Would you say it would be better than then the Springfield EMP

[@GBGuns]

It's a completely different size class

[@02xtera]

Single vs double stack - on a 1911 platform

[@dalerobbins4737]

yes

[@salparadise5448]

Excellent review. Regards from Germany! What kind of tool is it you use in the video?

[@GBGuns]

Vielend Dank! (Ja, Ich spreche auch ein bisschen Deutsch.) Die Werkzuege sind von Real Avid.

[@salparadise5448]

@@GBGuns top! Vielen Dank 🙏

[@sigpig912]

Where'd you get that holster from?

[@TheSuburban15]

8:52 - This is exactly why I can't stand reverse plugs. That, and you can't fix a loose fit with a $45 bushing.

[@mc4056]

Do they make threaded barrels for this? Also the trigger seems like the worst 1911 single action ive seen? A spongy take up and a longer pull.

[@juaquinwilson596]

thank you for the review: I have watched your SASII UL video, and theres no mention of this holster you show in this video, in that video... What holster do you show at the beginning of this video for the UL? Thank you!

[@GBGuns]

I didn't have that holster yet when I reviewed the UL as I didn't know at the time I'd want to start carrying it. It's from Tier 1 Concealed

[@juaquinwilson596]

copy that... thanks for getting back to me. these guys make some sweet holsters, good to know.@@GBGuns

[@hivelsword]

Love BUL 1911/2011 pistols. But I’m curious as to why they didn’t flute the barrel to trim weight like they did the ultra light 3.25” They shaved slide weight on the 4.25” but the barrel is so beefy. I’ve no dog in this fight. I tend to carry heavy handguns. Just curious.

[@GBGuns]

The pistol really isn't terribly heavy

[@jfaun2313]

Im having so much trouble putting in that stop lever..its like impossible to put back in

[@bjburton5931]

Is there a specific reason why you dont put the paper clip in before removing the slide and take it out after you put it back together. Honest curious question.

[@GBGuns]

In every 1911 video I've ever done I find a way to irritate or frustrate "experts" by following the steps in the manual instead of doing it "the right way". This was the closest I could get with this pistol.

[@LP_Freak]

Where are these made?

[@peterchiara813]

Exactly how long did you have to wait once you placed the order?

[@GBGuns]

It took a week or so to cross the country since I'm in the opposite corner.

[@itsjollymaehere842]

Hi good day! Full video watched.. Im looking a HOLSTER for a same Gun SAS ii tac 4.25. Can you please send me the link.. thank you so much..

[@GBGuns]

I can't safely link here, but I just used one from Tier 1 Concealed in a course and use the same one for carry.

[@Talix.]

What holster/holster company is that with the ultralight at the beginning?

[@GBGuns]

Tier 1 Concealment

[@wardroland270]

Thanks GB. Great job. Good info. God bless. LETS GO BRANDON

[@joemedic710]

Bul Arm has a problem following up on aftercare. Meaning they will blame your shooting vs a QC problem.

[@GBGuns]

What was your experience?

[@timkoliev3481]

what kind of ammo you suggesting ?

[@GBGuns]

See pinned comment for the ammo tested.

[@garymatney9344]

What was the price of the 4 1/4 Bul?

[@GBGuns]

It's in the pinned comment. We don't post numbers because then KZbin accuses us of selling and threatens to shut the chanel down.

[@chrisgilbert2152]

wheres the range video... GAWD makes me crazy...

[@GBGuns]

In the pinned comment

[@yuliybeilin5038]

+++👍🏻👍🏻👍🏻

[@wanderingandroid]

3.25 1911s looks returded. i can't stop laughing everytime i see one of those in person.

[@johndeere1951a]

$1,900.oo

[@GBGuns]

Not. They're less than that.

[@02xtera]

correct, less but on GB they are highest bidder

[@floydblack7115]

Stop using the phrase beginners gun there no such thing, making you look like those discriminative reviewers im a fan by the way

[@GBGuns]

Then you know we review all kinds of guns. Some are simpler than other, some have more descriptive manuals than others.

[@M0onM0nkey]

Sick of co-witness, don't need a big black block obscuring my dot

[@t2brfu67]

Kitty :))

[@chrisgilbert2152]

disagree with your optic practice! I would rather see a review of an OPTICS READY gun with an optic,

[@GBGuns]

But that changes performance of the gun depending on the optic and ammo used.

[@Range_Development_Services]

Awesome...to bad they're sold out everywhere. 🥲

[@GBGuns]

You've gotta be on the wait list and ready to buy when you get a notification