Installing the BRS 150 GPD Water Saver Upgrade Kit | BRStv How-To

  Рет қаралды 53,500

BRStv - Saltwater Aquariums & Reef Tanks

BRStv - Saltwater Aquariums & Reef Tanks

Күн бұрын

Пікірлер: 65
@michaelcoelhojr6851
@michaelcoelhojr6851 3 жыл бұрын
Just installed this. Boom! Making water twice as fast and half the waste! I haul water so saving water means less work so I is a happy boy!
@swd5090
@swd5090 7 жыл бұрын
I just bought this and it comes in the mail tomorrow, how did you know I would need a video? haha thanks guys!
@PacedFast
@PacedFast Жыл бұрын
Easy to follow. Made upgrading a breeze. Thank you!
@daniel69284
@daniel69284 7 жыл бұрын
Thank you guys for all your video training !!!
@bradsbirds8502
@bradsbirds8502 4 жыл бұрын
Directions worked perfectly
@CrazyHorseGirl
@CrazyHorseGirl 10 ай бұрын
Does the new filter have to be changed twice as often as the rest since it's filtering waste water?
@joyztik
@joyztik 5 жыл бұрын
After upgrading with this kit, would the system benefit even more with a permeate pump?
@joyztik
@joyztik 5 жыл бұрын
Thanks for your reply. I do have a pressurized tank. I forgot to mention that I also have a booster pump before the prefilters. Does it make a difference in what I asked?
@Mcappo
@Mcappo 3 жыл бұрын
Ok I installed the upgrade kit and am now curious if the flow restricter needs to also be upgraded. I upgraded to a 200 gpd kit. Thanks.
@BRStv
@BRStv 3 жыл бұрын
As long as you added the same size membrane to your system, you don't need to change the flow restrictor.
@edwardthayer9386
@edwardthayer9386 7 жыл бұрын
Thank you, can you please do a video on how to open the membrane canister without using a vise, pipe wrench, big pliers or anything that will damage the housing? I've seen and heard of many people having a major issue opening them up! thanks so much in advance!
@Will40th
@Will40th 5 ай бұрын
Could you do this with two 150 and make it into 300 gps
@rboo514
@rboo514 4 жыл бұрын
I have a 100 gpd membrane now.. Do I have to upgrade with another 100 gpd membrane, or can the membrane be mismatched?? (example,,, upgrading my 100gpd with a 75gpd?)
@BRStv
@BRStv 4 жыл бұрын
You'll want to match the membranes up because you're only going to use one flow restrictor. It's important that that flow restrictor is properly sized for optimal performance.
@quagmire5765
@quagmire5765 2 жыл бұрын
I bought the 100gpd rodi system and my pressure is at 62psi do you think I can add this water saver with 62psi?
@BRStv
@BRStv 2 жыл бұрын
The difference between 62 and 65 psi is going to be so small that you will hardly notice.
@Seattlekoi
@Seattlekoi 5 жыл бұрын
80psi Tds in 24 out 0 When i install my the upgrade to 200gal my second membrane only product drop water instant of double my output.
@demileonielaisure3100
@demileonielaisure3100 2 жыл бұрын
Question with this…….can you fit a 150gpd waste stage to a 400gpd primary filter…..or do these have to be matched….eg 150 and 150 or 400 and 400….to stay balanced.
@BRStv
@BRStv 2 жыл бұрын
You'll want to match the RO membranes if you're going to be running them in a water saver configuration because they both work off of one flow restrictor that needs to be sized properly for both membranes.
@P0HTAT0
@P0HTAT0 7 жыл бұрын
I have a some what unusually low TDS normally 30 and under with near unmeasurable chlorine levels. Would it be possible to get by with a line up of filter and carbon blocks without the full RO/DI system?
@callmenemo491
@callmenemo491 7 жыл бұрын
cool. quick question, what would happen if i put 2 extra 'upgrade' kits on in series.. your video showed with 1 extra... how about if i did 2? would i get better performance or is their like a limit where the gain you get in product water is minimal.
@callmenemo491
@callmenemo491 7 жыл бұрын
Good answer! Thanks!
@Frkmrn
@Frkmrn 5 жыл бұрын
Pls tell me Pump will be upgrade required
@viti339
@viti339 6 жыл бұрын
Hi. What difference does it make to the system, if you have 400 flow restrictor, compared to a 550 restrictor. As I've seen other videos with your system and they have the 400 fitted.
@kenthoang2202
@kenthoang2202 4 жыл бұрын
Do you have 2 outputs on this unit? 1 output for RO water drinking, 1 output for RODI water ? I would like to buy a filter kit that I can use for both: reef tank & drinking water as well
@BRStv
@BRStv 4 жыл бұрын
You could simply add a t fitting after the RO membrane, but before the DI. That way, you could have one line go through the DI for your reef tank water, and another line bypassing it for your drinking water.
@michaelisakov1108
@michaelisakov1108 5 жыл бұрын
I have a 100gpd system, can I add another 150gpd membrane on top or does it have to be 150gpd one?
@UnfilteredJustice
@UnfilteredJustice 7 жыл бұрын
If I were to use 2 - 100gpd membranes, what would be the required psi? Right now I'm running a single 150gpd membrane at 65-80 psi, depending if other water sources are running in the house. Also, could one use an oversized restrictor to boost the psi?
@asadlarik3
@asadlarik3 7 жыл бұрын
how about a review of dow 500gpd membrane?
@_anthonyisafish_2100
@_anthonyisafish_2100 7 жыл бұрын
My rodi has air stuck in it and makes an annoying vibrating noise. Can you make a video on this?
@penPuck
@penPuck 3 жыл бұрын
I followed this video to the T, but when I open the flush valve, nothing comes out. I do have the flush valve the correct direction. Did I miss something? It also renders my booster pump ineffective when the valve is open. Not sure what's up with that. I am already enjoying being able to make water over 5x as quickly.
@BRStv
@BRStv 3 жыл бұрын
You'll want the flush valve in the "closed" position when you're making water. If you're still having troubles, give our customer service team a call and I'm certain that we can get you up and running.
@laurenhanna3233
@laurenhanna3233 5 жыл бұрын
does it have to be a Y-connector or can it be a T connector? (the part the merges the RO water into the two units)
@BRStv
@BRStv 5 жыл бұрын
A T connection will work just the same 🙂
@laurenhanna3233
@laurenhanna3233 5 жыл бұрын
Bulk Reef Supply perfect! Thank you for replying!!
@UltraReefReseller
@UltraReefReseller 7 жыл бұрын
At what TDS should you change the pre-filters?
@UnfilteredJustice
@UnfilteredJustice 7 жыл бұрын
UltraReef's Channel You change the sediment filter when your psi starts to drop, meaning it's getting clogged. You change the carbon block by measuring the chlorine in your product water. They sell very simple strips on BRs website. As soon as it starts to register the slightest level of chlorine, it's time to replace. And I'm talking .25ppm of chlorine so it won't ruin the membrane. More often than not I just replace the sediment and carbon together even if the carbon isn't exhausted. It's just easier.
@Ju5tin4real
@Ju5tin4real 3 жыл бұрын
I change all three pre filter as they are cheap enough when bought together. 10 mins and done.
@UltraReefReseller
@UltraReefReseller 3 жыл бұрын
@@Ju5tin4real lol, 3 years later, that's what I've been doing as well. I've even put in new RO membranes on this 7 stage RODI unit from BRS, still going strong making great water!
@kiayodo
@kiayodo 7 жыл бұрын
hi. what flow restrictor recommend for 200 gpd single membrane? thanks
@juliandiaz44
@juliandiaz44 5 жыл бұрын
When using the waste water line for the second membrane, doesn't this mean the second membrane will be consumed faster, as it gets water with a higher TDS then water from the source line?
@BRStv
@BRStv 5 жыл бұрын
That's a plausible theory. Even so, the TDS concentration isn't usually drastically higher. If you had 200 TDS source water, that would mean roughly 250 TDS hitting the second membrane. Definitely not a huge jump and something the second membrane could easily take care of. Even in a water saver configuration, most of our customers will see 2-3+ years of membrane life.
@xzibit8614
@xzibit8614 4 жыл бұрын
Question: I have an auto flush on my RO. Right now when that runs, it’ll flush the membrane. But how does that system work now that the waste water from the first is going into the second RO? When the system calls for “flush”, will that allow for both membranes to properly flush?
@BRStv
@BRStv 4 жыл бұрын
Since both membranes operate on a single flush valve, they'll both effectively be flushed when the auto flush is in the flush mode 😀
@xzibit8614
@xzibit8614 4 жыл бұрын
Thank you for the quick reply. Last question: I want to install a drinking water kit before my DI. But I keep reading about TDS creep. Since the sink faucet will fill a glass at a time, and I’ll also install a T fitting to feed the fridge. Will my drinking water reservoir be full of TDS due to short runs? Right now it flushes for 15 seconds before it runs. But is that enough to prevent TDS creep in the permeate line? By the way I live in San Jose, CA. My tap water reads 394 TDS. Tastes horrible.. If I go forth, do you know when the water saver kit will be back in stock?
@TwoOnesTanks
@TwoOnesTanks 5 жыл бұрын
for 65 psi, do i need to install a booster pump? I'm told house psi shouldnt be more than 60
@BRStv
@BRStv 5 жыл бұрын
You would not need a booster at 65 PSI. This is the minimum requirement for our water saver upgrade as well.
@xzibit8614
@xzibit8614 4 жыл бұрын
Question: I have an auto flush on my RO. I just installed the BRS water saver kit... how does that change the auto flushing process?
@BRStv
@BRStv 4 жыл бұрын
It doesn't change how the auto flush operates. Since the water saver systems use a single flow restrictor, the auto flush will effectively flush both membranes.
@xzibit8614
@xzibit8614 4 жыл бұрын
Got it. Do I have to install a larger capacity flow restrictor?
@reaganho4602
@reaganho4602 7 жыл бұрын
hi, at your website which one should I choose to get the BRS 150 GPD Water Saver Upgrade Kit 4 Stage 75GPD dual series? is it this 4 Stage 150GPD Plus Water Saver RO/DI System $219.99??
@Val_Halla777
@Val_Halla777 Жыл бұрын
Waste Water purity question: On average, how much cleaner is the waste water produced from 1 RO (75gpd membrane) compared to the source tap water? Example: If source tap water had 50ppmTDS and normal city amount of chlorine etc…Would the waste water produced still have less TDS than the source tap water? because it’s passed through the pre filters ? Or does the RO membrane add anything bad back?
@BRStv
@BRStv Жыл бұрын
That's a good question. While we've never looked into that specifically, here are some thoughts. The waste water, like the product water, all passes through the pre-filters. Those pre-filters don't remove TDS, but they do help remove sediment and chlorine/chloramines from the water. So, in that regard, the waste water from the RO/DI system is still "better" than tap water. As far as TDS goes, the TDS of waste water should be slightly higher than your source water as it's more concentrated after being rejected by the RO membrane.
@myreeflife7072
@myreeflife7072 7 жыл бұрын
Good to know!
@Stankdog69
@Stankdog69 4 жыл бұрын
Adding this membrane dropped my pressure 20psi. 75-55..... probably negligent savings. That's with booster.
@BRStv
@BRStv 4 жыл бұрын
That's very strange, we usually don't see a significant pressure drop when adding a water saver upgrade kit. I would suggest double checking that all of the plumbing is correct before you give up on it.
@Stankdog69
@Stankdog69 3 жыл бұрын
@@BRStv Thank you. I ended up forgoing the self piercing saddle valve and ran a T-fitting. I now have excellent pressure without the worry it will leak.
@MerkDolf
@MerkDolf 7 жыл бұрын
why wouldn't you add more pre-filters
@Pberpan1076
@Pberpan1076 7 жыл бұрын
goooood
@vnguyen9327
@vnguyen9327 4 жыл бұрын
your resident water can NOT have at 2.2 ppi NEVER- NO Matter what unles you install the full system filter water like those store who sale water
@aquaticasmr184
@aquaticasmr184 7 жыл бұрын
2nd?
BEWARE! These RO/DI Water Mistakes are sending $$ down the drain! Your reef tank deserves better.
26:59
BRStv - Saltwater Aquariums & Reef Tanks
Рет қаралды 220 М.
Why would I want two RO membranes instead of one?   | BRStv Investigates
11:12
BRStv - Saltwater Aquariums & Reef Tanks
Рет қаралды 123 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Does Reverse Osmosis Waste Water? Understanding RO Efficiency
7:57
Fresh Water Systems
Рет қаралды 17 М.
How to Install Your RODI System from Melev's Reef
13:14
melevsreef
Рет қаралды 59 М.
Increase Reef Tank RO/DI Efficiency With SIMPLE Upgrades!
4:57
Bulk Reef Supply - Saltwater Aquariums
Рет қаралды 17 М.
Installing an RO/DI System for My Reef Tank
15:49
Dollar
Рет қаралды 10 М.
90% of Toilets Are Installed Wrong (Here’s the Right Way)
16:04
Home RenoVision DIY
Рет қаралды 2,2 МЛН
12 Things Every Reefer Should Know About Choosing the RIGHT RO/DI System!
12:29
BRStv - Saltwater Aquariums & Reef Tanks
Рет қаралды 10 М.
Better RODI water performance with these Best of 2019 RODI Upgrades!
16:27
BRStv - Saltwater Aquariums & Reef Tanks
Рет қаралды 31 М.
Water your yard FOR FREE !!!
17:01
SuburbanBiology
Рет қаралды 964 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН