Bullet Mole Sidewalk Kit

This video by Bullet Mole demonstrates how to use their Sidewalk Kit to install pipes or conduit under sidewalks. It's a valuable tool for anyone who needs to run cables or pipes underneath existing concrete paths.
The video walks viewers through the entire process, from prepping the work area by digging trenches to choosing an installation method. There are three methods covered: standard installation (make a hole, then insert the pipe), pipe on shaft installation (install the pipe as the hole is made), and rolled pipe installation (pull coiled pipe into the hole as it's created). The video provides clear step-by-step instructions for each method, including how to use the Bullet Mole tool itself and how to connect the pipes once they're in place.
Order the Bullet Mole Sidewalk Kit here: bulletmole.com/collections/pr...

[@MelancholyMadoka]

Moles are digging up my yard, so I watched some videos on how to get rid of moles a few days ago. Today KZbin recommended this video. When I saw the title I thought "bullet mole" was something different, and apparently so did KZbin.

[@stephenlafontaine2286]

Well For sure this tool would go through a mole, lining it up might be a bit difficult. Thank you for your response.

[@dbeekman9738]

@@stephenlafontaine2286 You have to trench 2 inches deeper than the mole to account for the sled guide.

[@stephenlafontaine2286]

@@dbeekman9738 yes that is correct

[@leroysmith1214]

I have two 1year old dogs that are part beagle, chihuahua, and dashound. They howl like a beagle (I love that), yap like a chi, and dig all day long. Moles don't stand a chance in my yard!

[@Joe-oi6eh]

🤣

[@frotobaggins7169]

i've actually used this method to replace the water main under a virtually undiggable front yard that ran in to a state hi way. the excavation alone was estimated at $4,000. i put the pipe in in about one day. i removed two squares of sidewalk and dug a 6' ditch by hand which took me about one day. i jused 10' sections of 3/4" steel pipe with a plug as the impact end for the hammer. i used a 4 pound hammer and went through 3 plugs. i put the whole thing inside an 1 1/2 pvc pipe 20' long, then added another 10' section to make the 30' out to the street box in the sidewalk. because i was inside a pipe, i didn't need an exit trench. i just pulled the steel pipe out of the pvc pipe back in to the basement. i was off target about 4 inches at 30 feet. the plumber, inspector and the water company were more than impressed.

[@stephenlafontaine2286]

Thats awsome. Your the man! Enginuity and perserverence is what makes thing happen. Way to go! Even with those rudamentary materials you were able to prevail. By this you can see how much better it would have been to use a Bullet Mole which is actually built specifically for this task. From steel chemistry to functionality to thread design to heat treating and tempering to forging the Bullet mole is built to get it done and to last for years. And it positively will indeed. There is nothing quite like it except what you just used. An I respect you for what you did. thnak you for your comment and again congratulations!

[@frotobaggins7169]

@@stephenlafontaine2286 thanks. i wish i had something like the bullet mole. i made and welded a cone to the end of a 1 1/2 pipe cap as the point. my problem was i needed to go 30 feet and the cost for my one time use was not feasible, it wouldn't be much cheaper than just digging. it would quickly pay for it self if it was something i could use regulardly. most plumbers i contacted told me it couldn't be done. my other big problem was drilling through the 120 year old foundation. i used a diamond core bit i found on craigslist for $25. good thing to because it was solid rock for the first 5 feet including about a foot of granite. your tool seems like it would work great for doing what i did. the thing people should know and practice without fail is call before you dig. there was a 12" plastic high pressure gas main 40 feet out from the house for me. i wouldn't want to hit that. it would be cool if you made ends that would screw on to steel pipe that a guy could buy or make to any desired length. i read in the comments where you talked about the cost of the various lengths of shorter rods. i like how your system allows the pipe to go along with the rod. what i did was just unscrew the end and pulled the pipe back through the pipe.

[@stephenlafontaine2286]

@@frotobaggins7169 thank you for your b response. You have hands on experience. FYI we have just came out with a point and impact cap that screws onto a GRC pipe thT can be driven into the ground, then remove the point and cap when your through and leave the pipe. We do recommend using the bullet mole first but you probable could drive it straight away if you have relatively soft soil. You can see a short clip of this in action on our website at bulletmole.com .it's at the very end of the video, "especially for electricians."

[@oldporkchops]

@@frotobaggins7169 Very innovative system. If you ever make a video out of this, please let me know. Thanks for sharing.

[@sifarcher]

Excellent Tool! Our utilities board will definitely (hopefully!) get a few sets for the outer islands too! 🙂

[@stephenlafontaine2286]

Thank you. It is indeed an extreemly effective and awsome tool. It has been 29 years in development and perfection. We also have some new products that will be comming out soon. If you have any additional questions please call me at 909-270-0933. My name is Steve LaFontaine

[@faithjones9157]

Awesome, thanks for the video 😊

[@Niawen2011]

I once saw something quite similar used to route gas, water and fiber optics beneath a creek while it was flowing. Not a minnow or a crawfish was disturbed. I was fairly impressed.

[@jakeeveryday7531]

Same!

[@jamesbizs]

lol doubt it was quite similar.

[@AdamBechtol]

Nice.

[@robertlangley258]

I certainly doubt this is true, unless it was a professional company with lots of experience and a hydraulic driving machine using a special point attachment that can control the direction you want it to go.

[@f.demascio1857]

I guess I should have marketed this myself 10 years ago. Good on you man.

[@stephenlafontaine2286]

Well Thank you. We began development on this tool sytem 24 Years ago. Although it looks simple, it is really quite complex. Between the specific design features which are patented for various parts, the steel chemistry which is different for practically each part and the diverse heat treating and tempering processes specific to each part depending on the demands and requirements that each one must perform. It has literally evolved for over 2 decades to reach it's ultimate state of performance to such a point that the tool will not only complete its intended job but will also last a long, long time and be reliable to continue performing for years to come.

[@zWhistler]

@@stephenlafontaine2286: I could of used something like this about 40 years ago. LOL

[@Make-Asylums-Great-Again]

Exactly

[@timothymccarthy4704]

Used to use the bullet hooked up to an air compressor. The bullet was twice the size as demonstrated, and it had to go thru a 3 lane highway to install water mains. It was awesome to use. I was on the side to "catch" the bullet when it reached the other side of the road. Freaking things were heavy.

[@parkerjohnson1781]

I've used the 2" hammerhead mole for waterlines on a 185 cfm compressor. They are pretty heavy

[@MrMattydavee]

Those are called pneumatic missiles. Tink-tink-tink-tink. Uhhh was it suppose to come up through the road????

[@bigdaddydoggy4842]

Earth displacement hammer. Various brands and designs for different ground types.

[@SeattlePioneer]

In the gas utility I worked for, we called them "Hole Hogs," About six feet longand four inches in diameter, and powered by a hose supply compressed air from a gasoline compressor, they would pound their way across a street, up through a rock garden or wherever they needed to go. Pretty amazing, although they required some skill to aim so that they might go where you wanted and not someplace you didn't want them to go. Youn needed to know when to stop, dig them up and reposition them for another leg. Yep. That was the sound!

[@robertwhitfield59]

​@MrMattydavee or ram bores

[@sweetlogo]

Wow, what a great tool and video, so that's how you do that 🤔👍

[@illbee3395]

I've been doing this for more than 30 years with a standard pipe and it didn't cost me an extra tool

[@stephenlafontaine2286]

Your fortunate to have had clean soil. Most of the country however is covered with Mountains however we have sold a lot of these in Florida where it's sandy but of course I think they bought them for the roots. Most of the the feedback that we get from professionals is that they are really done with water assisted bores. Thank you for your input.

[@illbee3395]

@@stephenlafontaine2286 my soil is glacial till full of rocks and cobble hardly easy but no different than pushing through limestone of Florida maybe a little harder- gabbro, granite

[@WApnj]

Wishing you great success with this tool....

[@DanBurgaud]

Interesting product!

[@PaulGSmith-hh8rw]

This is nice for busting through rocks. I’ve hammered a piece of 1 1/2” Sch. 40 PVC cut at a 45 degree angle with a block of wood at the back to use as a water service pipe sleeve under little sidewalks on hand digs but the pipe is full of soil at the exit side. Rodding out and rinsing out the sleeve is always a chore.

[@user-zq6pj5jo8j]

I use a Pressure washer with a Zero deg tip. Works very well in just a few mins.

[@Imwright720]

That’s pretty cool. I took a piece of pipe and a car jack. Pushed it right through in under 5 minutes. Took longer to dig the trench than push it through.

[@TrillMoFucka]

Can you explain the process?

[@Imwright720]

@@TrillMoFucka I took a 6’ piece of metal fence post 2’ diameter and laid it in a 8’ trench that was 2’ deep. I used the bottle jack from my truck against the dirt and the pipe and pushed it through. The little bit of dirt that entered the pipe was flushed out with 3/4” pvc connected to a garden hose.

[@robertrushing627]

So many variations of this tool out there

[@gentleman_908]

Nice video thanks

[@shoestringeng6473]

At first I was going to say I dislike this but after watching whole Vid it has a lot of good engineering to the method. I don't know if this is always the best or most practical way to do the job but there are a lot of elements to the design and technique that not only work here but would be transferable to solving other difficult problems. Nice Job, and Nice Vajayo!

[@stephenlafontaine2286]

Thank you. It has been thought out very carefully over 27 years. It is compact, extremely effective and will last for many years.

[@shoestringeng6473]

@@stephenlafontaine2286 Not sure if you want to answer this publicly or at all but I know a good patent cost about $10K, if you have to defend it in court you are looking at 100K+. price point for the product is somthing only a guy in trade would buy not a home owner. The products look professionally manufactured. when it is all said and done how many years did it take just to break even on producing somthing like this? Do you manufacture or have access to other trades that let you do this and not go broke. I understand that you may not want to divulge. just do hard to bring an innovative product to market today....Even if you can't answer Kudo to all your efforts and the time and energy it takes to do what you have done here!!!!!!!!

[@stephenlafontaine2286]

Thank you For your comment And input. Looks like a very simple concept but in reality it's quite complicated between the steel chemistry the forging techniques the thread design he treating in tempering processes are different in each part of the tool. Because each part has to perform a specific task and as such require specific inherent characteristics in So that it won't failCancel that it will perform I guess that's why no one has tried to knock it off After so many years besides we have patent infringement abatement insurance which pays for the defence of the patents that's about all I have to say thank you so much for your interest and comment.

[@shoestringeng6473]

@@stephenlafontaine2286 I did not know there was such a thing as patent infringement insurance. I knew of so many Patent infringement lawsuits over the years I thought it was almost useless to get a patent because you would need so much to protect it in court. I knew of companies that were more in the bussiness of patenting everything they could and then hope a big telecom company would accidently infringe it....... Great info Thank you!

[@stephenlafontaine2286]

@@shoestringeng6473 your welcome. The official name of the insurance is called patent enfringement abatement insurance.

[@effthegop]

In the olden days, the 70's, we would pound a piece of galvanized pipe under the walk and pull it out with a pipe wrench. Primitive but effective if the conditions were right. Water bore became the preferred method but it will get messy/muddy and will end up off course if it's a long bore.. I have water bored 2" pipe 20 feet under driveways. A home made "shooter" is under $10. Hose adapter, male adapter, brass nozzle and PVC pipe.

[@stephenlafontaine2286]

I totally get that. There are scenarios however where water cannot drain because you are below grade. But most of all what abour rocks ,roots or buried debris? Any one who has ever used water to bore a hole has come up against these situations

[@effthegop]

@@stephenlafontaine2286 Yep. Any kind of construction is full of challenges that we must face using a variety of tools and methods. For me the water bore has always been the most effective but there are times when nothing short of using a professional boring company or removing and replacing the concrete will work.

[@khaelha-elmixedtv4853]

Amazing tools,

[@robertschworm6036]

Of course, if you are pouring a sidewalk or driveway in the first place, do not forget to lay in a pvc pipe of at least 2-3 inch diameter with end caps on them for building a cable highway to get to the other side somewhere in the future. Otherwise you will have to drill thru as you show in this video. Yard lights are notorious for this problem.

[@whipwhiphco9430]

We’ve beat one 17’ as the farthest. Been using for a year just shattered the head the other day. It is a on beating this through hard dirt/rocks. And pulling it out unless your in a area to use equipment or some kind of pulling system.

[@larrythoman5555]

I tried to use one of these about 10 years ago to go under 6 feet of sidewalk. I rented it from a building supply company, unfortunately the bullet broke off and when it was finally retrieved (while creating the hole by another method) and the set returned the building supply company refunded the rental fee.

[@Fredrovicius]

I was hoping this was some type of bullet for the moles in my yard and the image had me excited we really had a powerful weapon against the yard destroyers. Turns out this gem is not for killing moles but making holes. No thanks I have plenty more than I want.

[@tacklebox6239]

Good luck!

[@rodiona8781]

Do you have a troubleshoot guide for step 5?

[@privatepilot4064]

I did the same thing except I glued a PVC nozzle to a stick of 1” PVC pipe and attached my garden hose to it and turned it on. Went under my driveway with no problem.

[@SeanD808]

Duck tape the hose to pvc and push and pull... looks like the cheapest but if you have the right soil.. mine is sandy...

[@darylcheshire1618]

as a kid I saw some workmen use a machine in a trench next to a road, the machine was a drill and pushed the bit under the road and extra lengths of pipe were added. I watched the bit make a slight bulge in the bitumen as the camber of the road made the exit point in the road so the job was stopped. The small bulge in the road remained for years. Presumably they should have checked the angle it was drilling at.

[@prophetanarchy2355]

I used a 6 meter length of 20mm pvc with water, took 10 minutes to penetrate under 5 meters of concrete drive way. Luckily it was just compacted dirt, had massive hand cramps afterwards due to turning the pvc to cut through, i also cut teeth into the pvc. Did the job.

[@stephenlafontaine2286]

It's always a wonderful thing when that happens. I'm glad the soil conditions were just right to allow you to get under with PVC pipe and water. Our tools are designed to make the whole and get the pipe underground in anything but perfect conditions, which is usually the case.

[@prophetanarchy2355]

@@stephenlafontaine2286 cause it was directly under a slab, no reason for anything other then compacted base to be there.

[@stephenlafontaine2286]

@@prophetanarchy2355 very true👍

[@vonr3375]

How wide can you go max? what if your sidewalk is a driveway and it is 12' wide or event wider maybe 15'?

[@mvblitzyo]

pretty cool tool ..

[@stephenlafontaine2286]

Thank you!

[@GilmerJohn]

Very cool.

[@stephenlafontaine2286]

Than you👍

[@davecollier8054]

That is a serious tool!

[@stephenlafontaine2286]

Thank you for noticing. It is a simple concept yet quite complicated in its steel chemistry and heat treating and tempering processes for each part. That is what what makes the Bullet Mole... Bullet proof.

[@ryanodneal7001]

I just cut off the end of a rock bar from Lowes. A 1 inch PVC pipe slides right over. Beat it through. Don't go under an expansion joint like they are in this video.

[@jum5238]

Hmm... I have an air chisel. I probably can do the same thing with that sticking in the end of a pipe, or against a capped pipe. Rotohammer might do it as well. Just need to vibration to drive it forward.

[@scotttod6954]

Do you make one with a SDS max adaptor so you can just use a jackhammer to drive it?

[@killuaHunter]

Drive it by hand is faster

[@AR-lw5nc]

Sooo I want my royalties bullet mole but make a tail end square handle that fits a hammer drill most have universal chucks; than this will be game changer.

[@kyleallen3857]

Minimize the entrance trench length by using screw together two foot sections on the tool

[@stephenlafontaine2286]

That is also possible. We used to make a 2 ft. Shaft, but it costs just about the same amount to make a

[@stephenlafontaine2286]

That is a great idea and is necessary at times. The set back lies in the fact that it costs almost as much to make a 2 foot shaft as it does to make our 5 ft 4 in shafts. So ultimately it would be cost inhibitive for most users, however in certain conditions that are truly restricted by fixed obstuctions or terrain then spending the extra dollars for shorter shafts would be worth it.

[@charlesdevier8203]

Nice!

[@stephenlafontaine2286]

Thank You!

[@raymondluwanuka8568]

Need to buy bullet mole for driveway bore but sure to how much energy it takes.

[@stephenlafontaine2286]

@@raymondluwanuka8568 it's really not as difficult as you might imagine. The sledge delivers an enormous amount of force with simple blows. In addition you are only driving the point (not) the shafts since the shafts are narrower than the point so the friction does not increase the further you go. The resistance and the fracturing power will be the same at 1 ft aside will be at 40 ft. We also rent them and ship them around the country in a relatively small case.

[@gregrupar135]

How many lengths can you put together if any? What if I have a 30” length ? Maybe I missed that

[@stephenlafontaine2286]

Yes you can add as many shafts as needed to go whatever length necessary. We have gone 66 ft.with no problem. We have gone 32-45 many many times. The average 2 lane road is 32 ft. And this is absolutely no problem at all. Check out our other videos at bulletmole.com, thank you for your comment.

[@pauliemoto]

You didn't miss anything, they never said anything about, putting multiple lengths together.

[@samuelspade889]

Wow! I missed the whole idea of this video. I thought this contraption killed moles.

[@mrBDeye]

I thought it was an instructional video for newlyweds. Pound the shaft into the hole then pull it out.

[@davidlang4442]

We ended up cutting the slab as it turned out there were three other 1" sprinkler lines under there that got speared as the point was pushed through. What a mess!

[@xenonram]

Wow, they really over complicated that.

[@qrelectronicrepair1802]

How much soil displacement happens with 2" inch. Is it possible to drive lets say 4? Or would that be outside of humanly impossible. I mean I know ah guy that drives a r r spike in 6 licks with a spike mul

[@stephenlafontaine2286]

The diameter of the point used for a 2 inch pipe is 3". Depending on how compact the soil is, will determine haw hard it is. If the soil is real tight we recommend driven the smaller point first. And in the case of dry clay or soil we recommend running some water through the hole made with the smaller point in order to moisten or lubricate the soil before driving the 3" point. Keep in mind that you are only driving the point which opens the hole bigger than the shafts. We have driven the 3" point straight away with many large roots under a 22 ft road. We used 3 guys which did make things easier. Thank you for your comment and queastion.

[@qrelectronicrepair1802]

I did some research hilti had done a bunch of r&d on a driver that impacts a pipe attachment similar to this but they sold the prototype to Milwaukee who never did anything with it . i guess the irrigation and sprinkler installation market is to small for the big names . that makes this product perfect for the installers who are makers on the side. Im impressed they have found the perfect product to produce. I would like to invest with them.

[@MBZS500]

What options are there for something wider than a sidewalk such as a driveway?

[@stephenlafontaine2286]

Check out our 2 car driveway video posted last week on our website at bulletmole.com. you can go as far as needed and install pipebup to 2". The shafts are 5 ft 4 inches long so you would buy as many as need in addition to the ones that come in the tool pack, to achieve your desired distance.

[@effthegop]

Water bore. Hose, hose to PVC adapter, PVC mare adapter and brass pointy spray nozzle. Just make sure to stay level or it can dive down several feet

[@skoalsoldier]

“Hey baby, you wanna practice some step 2?”

[@KrazyKajun602]

No mention how to do it if your driveway is wider ? I have a 14' wide driveway.

[@twoandhalfbengals]

youtube takes you to amazing things..

[@chrisclarke7828]

I started in construction at fifteen years of age, l am now seventy five, and have never needed this type of tool.

[@stephenlafontaine2286]

It's always a relief to NOT have to go under pavement to install a water line , gasline, or electrical conduit. However; I know thousands of companies and homeowners who do need to gain access under pavement and some, thats all they do every day. For those that do need to get a pipe under pavement, this is the ticket! It will get your pipe under every single time you need to, no matter what's underneath.

[@kerrytodd3753]

I agree, if that’s the type work you do for a living…..sprinklers, lighting, etc. a great tool for those guys. I wonder if it’s the same company that makes the mighty mole? I’ve used those numerous times for longer bores before directional boring. This is a take on the ditch witch P-40/80 rod pusher……DW used hydraulics, they use elbow grease….nice concept!

[@user-sw2jd1cn4c]

👍

[@MyTubeSVp]

This was a VERY American instruction video !... 😉

[@stephenlafontaine2286]

Thank you! We do love making a 100% made in America tool with 100% American materials. Please keep an eye out for a series of videos to come, with the next one to be posting within 1 week and the others to follow.

[@allmorrisvideos]

Our feet and inches might be silly, but they got us to the moon.

[@court2379]

@@allmorrisvideos That really is a silly thing to say. Like our stick marked in inches is somehow better than the same stick marked in meters/mm or vice versa. That using a different measuring stick would somehow have made it impossible to do exactly the same thing. Then further NASA later converting to metric further degrades the merit of the comment. I can only imagine what people in other countries think about such comments. Further because it was 70 years ago, and nearly any modern country could easy do the same if they wanted to fund it.

[@PigeonSwag]

@@court2379 As someone in another country, after hearing about Lockheeds little number fumble, I have lost the ability to be shocked by the US insistence to stick to the old system

[@court2379]

@@PigeonSwag It's pretty simple. When everything your whole life has used them, and for most people it doesn't hinder them in any way, they have no reason to change. Its not like using one graduated stick over a slightly different one makes a difference. So the minority that works internationally in the sciences or manufacturing doesn't really have the influence to change the rest of the country that is comfortable and has no reason too.

[@LuckyRaj-on3lz]

How to order this product

[@blackpine6693]

My dad ran electric to the garage about 20’ from the basement using a bullet tip on heavy conduit……that was about sixty years ago…..

[@stephenlafontaine2286]

He's a smart man. We've been doing This 30 years. So that would still be thirty years before that.

[@treasurecoastanglers1003]

I'm assuming this is marketed towards homeowners? Because I'm a lead technician and I can show you 15 different ways to do this that are much faster and more simple than this thing. But I'm a fan of over-engineering things, no shortage of people out there with more money than brains! There's a market for EVERYTHING.

[@stephenlafontaine2286]

kzbin.info/www/bejne/b4i2Y2qZr9uHjK8 Watch this sidewalk kit video and show me just 1 tool out of your 15 great ideas that can do the same thing. Obviously the price of the tool is not geared towards home owners but professionals that need a tool that they can rely on getting under sudewalks and driveways not just once but over and over and over again without fail. We do rent the tool to homeowners nation wide and they together with all those who have been buying the tool for 29 years now, they all have brains. And have all had great success because of using a tool like this that actually works. If youve never used one of these your not really qualified to compare. Anyway I invite you to show me one method that will go through such debri. Thank you.

[@pumpupthevolume4775]

No you can't.

[@glashoppah]

You might add a note that the PVC pipe needs to have a nice square cut resting against that washer.

[@haunthunterify]

A tock above the surface would give way but an underground rock of that size will be surrounded by dirt compressing it together.

[@ron827]

The theory looks good on paper as do all theories. Results may differ.

[@adfadgaqgv]

How about a SDS Max attachment?

[@stephenlafontaine2286]

Our jack hammer adapter fits both1-1/8" hex shaft jack hammers as well as SDS max. The same one fits both

[@josejusino6171]

Only do this under an expansion joint or you will have a crack directly under this. Guaranteed I bored cabling for many years....The expansion joint take the crack instead.

[@robertlangley258]

OH MY GOODNESS, when I saw this video I thought, there are going to be a lot of very unhappy people if they buy this contraption. This thing will not necessarily go straight depending on what is below your concrete slab, it could go deeper and disappear or it could rise and come out after scraping along the bottom of your concrete slab. Or it could decide to go left or right and disappear. If you hit a tree root larger than four inches OD then you will get deflection, if you hit a hard rock larger than four inch OD (outside diameter) the rock won't split as it is surrounded by packed earth with no place to split. I tried this myself years ago with a similar tool that I had fabricated. If the soil you're driving through is sandy or loamy soil with no obstructions there is a chance you could do this going under a 3' wide sidewalk. But I'm sure folks with no experience with this sort of thing may run into trouble. This is my personal feelings but what the hell do I know I may be dumber than a bucket of hammer heads.

[@jw1962]

have you distributor in Australia for a great product

[@stephenlafontaine2286]

We used to have one but no longer have a distributor there. We would not be apposed to the idea.

[@courtenayblair2279]

Is it just me or was the way he jumps on the shovel at 0:55 hilarious

[@stephenlafontaine2286]

It's just you.

[@courtenayblair2279]

@@stephenlafontaine2286 thanks I wasn't sure

[@mrBDeye]

I just got married so this video is informative. Ok Drive the shaft into the hole. Then keep pounding?

[@Big_John_C]

If you don't pound someone else will

[@MacGyver2154]

Secretly stash your $ for the upcoming divorce.....

[@stephenlafontaine1282]

You might not want to show this to your wife. To bad that you degrade something that should be special between you and your wife to the point of comparing it to a mechanical process and tool. It doesnt show her respect and it doesn't lend to you intelligence quotient.

[@mrBDeye]

@@stephenlafontaine1282 I'm a comedian so its all for fun. Lighten up people.

[@stephenlafontaine2286]

@@mrBDeye well that doesn't surprise me because comedians have no respect for anything. There are no boundaries, however the reality in life is that some things should be respected and held in reverent regard. To the extent that we lightmindedly demean its sanctity then we are engendering the decay of our society from its core.

[@bobby_greene]

Will this product work if I need to go through a gas line?

[@stephenlafontaine2286]

Absolutely, gas lines both high and low pressure are made out of polyethylene and the Bullet Mole will penetrate them with ease. WITHOUT an explosion. This is because there is no spark.or enough oxygen underground to ignite a flame. We have actually tested it this way with a gas lines both low and high pressure. However the absolute safest route would be to turn off the gas first. If your being psarchastic and if you are a professional then you would know that you need to call dig alert at 811 first to know where the gas lines are and next you need to pot hole areas where you need to know precisely how deep they are so that you can lay out your job more clearly and avoid avoid hitting them. Either way you will have great success with this amazing tool. Thank you for your comment

[@bigdaddydoggy4842]

Don’t listen to this bloke, tested it hitting gas pipes have you? You are giving out false and dangerous information about gas pipes. Ruptured gas pipes can and do cause explosions. You need to stop now!

[@lenpolidori3568]

A ground rod and hammer work fine for me.

[@MarkTubeG]

The first, and most important step, is missing. You call 811 before you dig the trench. Have them identify where all the utility lines are. Otherwise, YOU are liable for any repairs, which _start_ in the five-figure range.

[@DiegoVargas-tm4sv]

interesting

[@royrice8597]

Why is it,once you dig a hole, you always have to put more dirt in it than you took out?? 🤔🤔🤔

[@bobbypatton4903]

Lolololol true that.

[@MicahFunk]

That's along the same mystery of the vanishing sock once it enters the dryer. 😆

[@christopherbonanno1120]

It Sucks. I’m a plumber and so many time gas lines go there sewer lines. Just did and do it safe

[@gyrsriddle]

So, I pound a pointy piece of pipe under the sidewalk? Got it.

[@ccvee7287]

A ground rod and sds will do exact same thing

[@stephenlafontaine2286]

So a ground rod will make a hole through rocks, roots and install a 1-1/4",1-1/2" or 2" pvc or poly pipe? Copper ground rods.....the last time I checked are made of copper, a soft metal, so When it hits a sizeable rock or root it ain't going nowhere except stuck and bent.Since our tool is not made if copper it will actually penetrate these types of obstacles and install the pipe through them. Not to mention the point is larger than the shaft(unlike a ground rod) so they will never get stuck ( like a ground rod will). Thank you for your response.

[@ccvee7287]

@@stephenlafontaine2286 Actually ground rods are copper clad not copper and yes they will work exactly like this thing. Once the hole is made its easy to push PVC through 99% of applications. Electricians do this every single day. Irrigation guys use a water jet usually. Rather than be condescending maybe you should use the info to realize why the construction industry isn't using this tool more. I just gave you the answer.

[@stephenlafontaine2286]

From my perspective the electrical,irrigation, data installation companies etc. Are all using this tool it quite a bit and have been over the last 27 years. That is why we are still here. There is demand.

[@ccvee7287]

@@stephenlafontaine2286 Never seen one on a construction site in my life and I've been a PM for many years.

[@cezarrodriguez9827]

Where can you purchase this mole kit

[@stephenlafontaine2286]

You can go to bulletmole.com and purchase there or call me at 888-650-5554.

[@bigdaddydoggy4842]

From your insurance company, they will love your premiums.

[@gunpowderHVA]

I've been doing this with a peice of pvc and a pressure washer for over 10 years......😆

[@stephenlafontaine2286]

WOW,! Hey, Have you ever tried black iron pipe? Some of the comments I've reieved talk of using it. It sounds so durable... compared to PVC. Then again it is cheaper to buy PVC Pipe, so why spend the "extra money" if you don't need to. Well anyway it must be nice to have worked 10 years in soft, clean soul conditions. Most of America however, is covered with some type of hills or mountains. Anyways your the man keep up the good work. Inovation is what built our great country.

[@gunpowderHVA]

@@stephenlafontaine2286 I have no idea what soft dirt is. I live in Southern California. 90% rocks 10% dirt. In harder areas I use steel pipe with a sharpened end and thread my pvc onto the back. And homeowners don't want me to run black iron pipe all over their yard for sprinklers. Most hoas won't even let you.

[@stephenlafontaine2286]

Well that's very impressive how you can slide your pipe, wether its PVC or steel, through soil that is 90% rock. I would say you Rock!! Keep up the great work. Are you Able to get under driveways as well with the same method?.

[@gunpowderHVA]

@@stephenlafontaine2286 30 or 40 feet was probably longest run under a patio. Yes driveways as well. I'm not talking commercial here only residential.

[@stephenlafontaine2286]

@@gunpowderHVA wow you really do rock then.

[@crazyhandshands9028]

A hammer drill with a 1" concrete bit done pull the cable through done.

[@bobwhelk2117]

I’m a little confused where’s steps 6 thru 20?

[@cannon440]

WOW you do not give it away! 2-CAR DRIVEWAY KIT $2,460.00 PRO PACK $3,975.00

[@RobertA-jw4pe]

Yep mine got stuck can’t get it out time to rent a backhoe

[@stephenlafontaine2286]

They do get hard to pull out but in 28 years of using this tool we have always gotten them out never lost one and never needed a back hoe to do it. You might check into our extraction chain. That's the ticket when you need to grab it to pull it out. Thank you for your comment.

[@cliffjohnson2273]

They seem to sell for $2,400 Not something for the home owner. if you 4" pbc for rain watter.

[@jordanhenshaw]

That's what she said.

[@joecookieee]

5:44

[@rickleasure]

The Bullet Mole really should come with a Mole Gun to ease the use. It's what the founding fathers would have wanted.

[@stephenlafontaine2286]

Well Yes indeed we know that they will be quite proud because soon we will be Launching an automated version that eliminates the use of a sledgehammer. So keep it eye out for it thank you for your comment.

[@ChristianGutierrez]

Leonidas wants his spear back!😅

[@TM-nu5vd]

Great tool and would like to purchase BUT the prices I see online for this item are $1000 and some are triple this price. Where does one buy this -- can't seem to find it on Amazon? $1000 for this -- NO WAY!!

[@wayneguy6043]

That’s a lot of work

[@stephenlafontaine2286]

Installing pipe under pavement usually is. That's why we have the Bullet Mole so that no matter what... the pipe will be installed. And really, it goes through the ground much easier than it looks. In the words in Mary Popins.... "and snap the jobs a game".

[@stephenlafontaine2286]

That's correct

[@warrathblacktiger5566]

Be fine for large pipe but I find cutting teeth in a pvc and water do just fine and I can add on pieces as I go depending on the length of concrete pvc cheap the looks like it cost you a hundred or more and then the cost of add ones fine for commercial groups but not worth it for a independent contractor who can just push a pipe in no measuring string lines or sleds

[@stephenlafontaine2286]

THANK YOU FOR YOUR COMMENT. It sounds like you are in an area with ideal soil conditions. Water and pipe are definitgely cheaper and easier with 2 exceptions. #1 many homeowners are leary about undermining thier substrate with water which can create cracks in the future. As a result I have recieved many calls from concerned homeowners who take take over and look for a way that doesnt use water. (Something contractors should already know) #2 Hope you dont hit roots or burried debris,which is always inevitable and ends up creating an even bigger mess. Our tool is not cheap and usually not feasable for limited use customers as you mentioned so in order to help these customers we do rent the tool and ship it Nation wide.

[@warrathblacktiger5566]

@@stephenlafontaine2286 Sorry but I have hit many roots and over pores of concrete and most homeowners don’t stand there watching us do our work they expect us to clean up any mess and we do as for undermining once a pipe goes in it stays and it’s scheduled 40 or 80 that well supports the mined area as for holes being to large we simple flush soil back in bye caping one end off and adding some lose cement mix which supports the cement above

[@stephenlafontaine2286]

Sounds like bit of a hasstle messing with concrete and I know that PVC pipe is no match for substantial roots But if its working for you, thats what is most important. and I wish you all the best. Thnks again for your comments.

[@warrathblacktiger5566]

@@stephenlafontaine2286 Not at all it’s quite easy and we’re not trying to build with it just helps solidify the material back to its original density and as I said we us schedule 40 or 80 depending on the job which last a significant amount of time As for roots main reason to cut teeth into the hard pvc shreds them nicely if they were that bad I wouldn’t be installing a pipe there most likely the sidewalk or drive would have damage or a tree to close you want a more open area for your pipe as for mess it’s not only sloppy workers make that kind of mess and I’m not in any way sloppy on a well paying job that could lead to others

[@stephenlafontaine2286]

@@warrathblacktiger5566 So your telling me that you can penetrate/ shred the kind of eucalyptus roots seen in our sidewalk video with a PVC pipe?

[@chicagophoneguy]

Step 1... CALL FOR LOCATES...

[@stephenlafontaine2286]

Thank you.

[@neillezotte6818]

How Much!!! Holy Cow

[@stephenlafontaine2286]

You can see all of our pricing on our web site at bulletmole.com Our prices will be increasing by April 28, 2022.

[@keithnewton8981]

Sorry do to install fibre optical cable you woukd dig a trench to the property this would not be acceptable say you got 6 to 7 metre of drive way this would not work.

[@stephenlafontaine2286]

I dont really get what your point is. So Say I have to go 6 to 7 meters? That wouldnt be a problem, just keep adding shafts that are 49" at a time or 64" at a time from the same entrance trench wich can be 6-1/2 Ft long to 7-18/2 ft long depending on the shaft length. Weve been doing this 28 years so something must be working.

[@MrMattydavee]

This is like a pneumatic “ missile “ used for putting n underground utilities

[@MrMattydavee]

But a lot longer trench is needed.

[@MrMattydavee]

And it’s self powered unlike the missile that uses a compressor

[@stephenlafontaine2286]

Unlike the missles 1) it easily penetrates rocks and roots, 2)You will absolutely never loose a tool like torpedo that can dive and will not back its way up, so cut the hose or dig up the road to retrieve it. 3) Also the Bullet Me will install the pipe as well. 4)You don't need to buy or lug around a compressor. Just a few differences but they are not worth it to everyone. We have sold to quite a few missile owners.

[@user-sw2jd1cn4c]

С нашими камнями такое не прокатит

[@markthorsen2888]

This tool must be for municipal workers on the clock. Anyone else would use a pressure washer and be done in 1/4 of the time.

[@Jcreek201]

My first thought as well....turbo nozzle on a hose run right through the pipe. Feed em both as you go. Forgot this nonsense

[@AtlasReburdened]

Yep. I ran my house's water supply under a 10 foot wide driveway by just adapting a brass nozzle onto one side of the 3/4" PVC, and the existing water supply to the other side via a hose. Ate right through and exited only a half inch off from the target.

[@DerekFromBK]

How would a pressure washer go through Rock, roots, gravel? Power washing away the sand substrate ultimately weakens the sidewalk. The void the water creates can cause problems in time. This method doesn't create unwanted voids.

[@AtlasReburdened]

@@DerekFromBK I don't think anyone should be particularly worried about several inches thick concrete being able to bridge a 1 inch wide gap.

[@markthorsen2888]

@@DerekFromBK Breaking a rock in half doesn't create a void? Interesting. It is rare that you would find a large rock close to the slab as generally speaking, it would have been cleared at the time of pour unless you are close to bedrock. As for large roots, I would suspect that they would be raising the slab and I would hope that a respectable contractor would address that issue before running pipe under a compromised slab but who knows? I'm sure this compony would happily take your order for one.

[@lostpony4885]

Looks more certain than homemade pipe n hose method that cant penetrate a rock.

[@keithm6117]

At the start of the video you showed very long pathways which was misleading considering the length of the moles rod, and no indication of where point C should be..

[@keenobservations3050]

Step one, cut trench through concrete

[@user-sf9pq5ox7w]

nice but too expensive

[@mightymouse5029]

Step 147

[@mattjonesturbo1]

Company, just dig 8 feet on either side to go under 4 feet of sidewalk it will be fine that your whole yard is trashed.

[@stephenlafontaine2286]

I don't understand your comment. You only need to dig an entrance trench on one side of the sidewalk. Usually at the point where you're going to go under the sidewalk you already have a trench up to that point already. So it's not like you're opening an extra trench That you don't need. On the opposite side of the sidewalk you only need to dig an exit pit large enough to unscrew the point but usually when making a pipe connection on the opposite side there is usually some type of trench there as well. We also have 49" shafts That would require a much shorter entrance trench and you can Bang the shaft in at an angle Downward So that ultimately you don't even need to dig an entrance Trench. This video is a how to video Demonstrating every possible contingency and explaining every detail.. Most professionals know how to use the trool with a lot more ease and thoughtbthan what is shown in the video.

[@jskjsk3986]

Looked like a pre-drilled hole in that rock. @4:43

[@stephenlafontaine2286]

You might think so. Read the testimonials from our customers on our web site at bulletmole.com, who have been using it for almost 20 years. They know for themseves that not only do you not need water but there is also no need for pre drilling the rocks either! We haven't been here for 27 years for nothing.

[@jskjsk3986]

If it’s a good product, that part of the video takes away from it.

[@stephenlafontaine2286]

@@jskjsk3986 That part is there to clearly show what the tool will do to a rock if it runs into one or more. This is the biggest problem encountered when making a hole under pavement so in the video we want to destroy all speculation that this tool wont be able to penetrate obstacles. The feed back so far has been that that scene is what really convinces people that this is the right tool for them.

[@SuperSqueakyboy]

Expensive if you will use this just once.

[@roflstomps324]

This is the most complicated scenario I have ever seen for putting pipe under a sidewalk. Here's the simple version: 1 call utility scouts. 2 buy $30 72 inch pencil point digging bar from any hardware store. 3 dig trench. 4 line up bar. 5 hit bar through other side 6 duct tape pipe to just emerged digging bar shaft 7 pull digging bar with pipe attached back through hole 8 attach pipe to hookup 9 fill trench The hardest part is digging the trench. The rest is stupid easy.

[@stephenlafontaine2286]

True in some cases it might go as you explain. KEEP IN MIND, the OD. Of a digging bar is mabe 1" to 1-1/4". And its not hardened steel. I dont think you could drive it through the same debris that is shown in our sidewalk video.Going through cobble or lots of rocks in mountain areas that bar would get stuck because the shaft is the same size all the way. Then pulling the pipe back through would have so much friction on the pipe or conduit that it would probably detach quickly and be cracked or dammaged in such a small hole. Next please do note that the OD (outer diameter) of conduit is 1.315 or almost 1-3/8 of an inch which is larger than the 1inch pipe so ,oops your restricted to a 3/4" line which would still be very very tight. Anyway what happens when you need to install a 1" line ow a 1-1/4, 1-1/2 or 2" line? Would you use the same technology? What about longer distances? Sorry I dont mean to complicate things more but these are real viable questions that any professional would ask.

[@Snarkapotamus]

Easier yet, use a power washer and a piece of 1 1/2 pipe a little longer than the sidewalk is wide...dig holes on either side of the walk. Put the wand in the pipe and blast away! As stuff comes out and softens, wiggle the pipe forward.